getFormattedCylinder() is a helper function to format a list
of cylinders. It had that weird logic that it would skip
cylinders without description unless it is the first, which
would instead be written as "unkown".
The reason was the old statically sized cylinder array,
where it wasn't clear if a cylinder was actually in use.
This became obsolete when switching to a variable size
cylinder array. Firstly, all cylinders in the array were added
by the user. Secondly, we now also support dives without
cylinders, i.e. the first cylinder is not any different from
the rest.
Thus, remove the logic and format any cylinder without
description as being of type "unknown".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This adds the Oceanic Veo 4.0 & Pro Plus 4, the Sherwood Wisdom 4 and the
Tecdiving DiveComputer.eu to our list of known names.
The Oceanic Pro Plus X detection is simply moved to have the other names
in a more logical order.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
0249e12 split up the dive import logic in multiple steps. Thereby,
the one of the conditions for renumbering the imported dives (is
the last old dive numbered) got messed up: The first number of the
new dive was compared to the total number of old dives, which makes
no sense.
- Simply check for the number of the last existing dive (if any).
- Don't remember the number of old dives - the original table is
not modified anyway.
Fixes#2731
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We are usually showing pressures with localized group separator. And we made a
total mess out of things when then re-parsing those values. This caused us to
ignore start and end pressures in Subsurface-mobile when those were entered in
psi and included a group separator:
2,900psi was turned into 2.900psi which we then rounded to 0 mbar.
This fixes the problem by asking Qt to do the right thing instead of doing
stupid separator magic.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The merge_events() function was subtly and not-so-subtly broken in a
couple of ways:
- in commit 8c2383b49 ("Undo: don't modify source-dives on merge"), we
stopped walking the event list after we merged the first event from a
dive when the other dive computer had run out of events.
In particular, this meant that when merging consecutive dives, the
second dive only had the first event copied over to the merged dive.
This happened because the original code just moved the whole old list
over when there was nothing left from the other dive, so the old code
didn't need to iterate over the event list. The new code didn't
realize that the pointer movement used to copy the whole rest of the
list, and also stopped iterating.
In all fairness, the new code did get the time offset right, which
the old code didn't. So this was always buggy.
- similarly, the "avoid redundant gas changes" case was not handled for
the "we ran out of events for the other dive computer" case.
This fixes both issues.
Cc: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
gettimezoneoffset() returns incorrect values when called with a time_t.
Since we only accept the value here if it is within 5 minutes of 'now',
using the current timezone offset is a fair approximation.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For some reason we suddenly started logging the GPS fixes in UTC instead
of local time. Which caused the matching algorithm to fail (unless you
happened to be diving in UTC). Unclear what broke this, but this seems
like an easy enough fix, since the GPS fix being reported is by
definition "right around now". So using gettimezoneoffset() with the
current time seems "good enough".
I don't know when gettimezoneoffset() with an argument got broken, TBH.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A while ago, we introduced a preference whether O2 should
be considered narcotic. We used this when computing
best mix or when entering the He content via MND. But
we forgot to make the displayed MND depend on this
preference. This patch add this.
Fixes#2895
Signed-off-by: Robert C. Helling <helling@atdotde.de>
When removing the MAX_CYLINDERS restriction, the layout of the
pressure readings was changed from a (cylinder,sample) to a
(sample,cylinder) scheme. I.e. previously there were one cylinder
block for each sample, then one sample block for one cylinder.
However, after populating the samples, the array size was reduced
to the actual number of used samples. With the new layout this
breaks indexing. Therefore, restore the old layout.
Fixes#2887
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We did something really horribly wrong when merging cylinders. It's
been broken since commit 7c9f46a ("Core: remove MAX_CYLINDERS
restriction"), and used some really strange logic.
This rewrites the logic to be (I think) a bit more easy to understand.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This updates libdivecomputer to support the Oceans S1 and McLean Extreme
divecomputers.
It also adds the Oceans S1 to the list of dive computers we reconize by
bluetooth name.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Having the full list of all members in the exact order should be enough to get
g++ to accept the named initializers.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The last time those changed, we forgot to update serial_ftdi. In that change
set_latency had been removed from libdivecomputer and poll and ioctl had been
added. This caused the callbacks to no longer be aligned correctly and the
functions were called with the wrong arguments through the wrong function
pointers, leading to crashes.
Instead of the fragile assumptions about order and type of function pointers,
use named initializers. And while we are at it, fix that for the bluetooth
implementation as well.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For unknown reasons, the dive site and trip to be parsed into were
passed as pointers to pointers. A simple pointer seems to be enough,
since the object is not allocated by the function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This may seem like a bit heavy handed as it adds more global state, but given
the number of ways in which attempts to sync with the cloud can fail it seems
much more reliable to claim success in the spots where we actually know that we
have successfully synced with the remote server. Transporting that information
back through the various call chains turned out to be very disruptive and ugly,
so I went with global state instead.
Whenever we access cloud storage (or any git repo), we always first check if it
actually is a git repo by calling is_git_repository() - so this is the perfect
spot to initialize the variable to false.
And there are only two spots where we either clone the remote repo
(create_local_repo()) or update the remote with the (potentially merged) local
changes (check_remote_status()). So those are the two places where we set the
variable to true.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In many cases we did not log the issues the code ran into to stderr which made
remote debugging user problems much harder. This hopefully will help with that.
Since I was looking at the code, I also made the existing messages more
consistent.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Apparently libdivecomputer can return DC_GASMIX_UNKNOWN when
fetching tank info with
dc_parser_get_field(parser, DC_FIELD_TANK, i, &tank);
This caused emission of a warning, which was annoying users.
Disable the warning in that case.
Fixes#2866
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The last caller was removed in 7eb422d988.
Since this is the only caller of dive_within_time_range(), remove that
function as well.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In analogy to the timestamp -> QDateTime conversion, create a
common function.
1) For symmetry with the opposite conversion.
2) To remove numerous inconsistencies.
3) To remove use of the deprecated QDateTime::toTime_t() function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move this function from maintab.cpp to qthelper.cpp. Since the
functionality was used in numerous places, use the helper function
there as well. This removes a number of inconsistencies. For example,
sometime setTimeSpec(Qt::UTC) was called, even though the
QDateTime object was already created with that time spec.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The short and long date formats where initialized in a common if-branch.
However, inside the if-branch the code rechecked which of the two should
be initialized. This could make sense if there was some common code between
the two, but there wasn't. Therefore, make this two independent branches
to avoid one nesting-level.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a couple of known services (Scubapro G2 and Shearwater), and update
the names of others that turn out to be used for multiple dive
computers. Also add another Broadcom upgrade service UUID.
While at it, sort the services numerically to make it easier to see that
a UUID already exists, since these service numbers do get used across
multiple different devices.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We've tried to do this "automagic" service discovery, and it mostly
works, but then occasionally it doesn't.
Making things worse, I think different platforms end up enumerating
services differently, so our "pick the first service that looks like it
might be a serial service" ends up working on some platforms, but not
necessarily on others. Because "first" might be different.
So start a list of known good/bad services - and fall back to the old
logic when you can't decide reliably.
This fills in juat a few cases that I can easily check myself, and the
"details" field for them may be incomplete. For example, I know Nordic
Semiconductor has their vendor-specific UUIDs, and they can be found in
different devices, so calling them "Nordic UART" and "Nordic Flash"
services makes sense.
But the "Scubapro i770R" service? It might indeed be specific to the
Scubapro i770R. Or it might be a general service UUID that Pelagic
uses. Or it might be the service UUID of a particular chip, and found
in dive computers from other designs too (and not necessarily in all
i770R's either).
So this is a preliminary first stab at this, and I'm sure we'll extend
the list and possibly improve on the explanations.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The old code used get_taglist_string() and split the resulting
string at commas to get the list of tags. This was wrong for two
reasons:
1) It was buggy. Every tag but the first would start with a leading
space and thus not be found.
2) It was inefficient. The tag list was concatenated, just to be split
again.
Turn the tag list directly into a QStringList and remove whitespace
for good measure.
Fixes#2842.
Reported-by: Hartley Horwitz <hhrwtz@gmail.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We don't order the list of addresses alphabetically, but we want to ensure
that devices that offer us a name are listed before those that don't. This
should only be relevant if the user selects the option to show all BT/BLE
devices, not just recognized dive computer, because if we recognize a computer
we always have the product name prepended to the address.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user asks to have all BT/BLE devices shown, we should behave
consistently to the case of a recognized dive computer and always show the
device name. In almost all cases the BT/BLE address (and even worse on
iOS/macOS the weird uuids) are completely meaningless.
If there isn't a name, don't add a leading space in order to make it easy to
detect if we have an address without a name (which almost certainly isn't a
dive computer, so it should be towards the end of the list of addresses - which
will be handled in a later commit).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fixes a rather subtle bug.
In btdiscovery.cpp we are detecting dive computers based on their BT name and
are setting up product+vendor as the key for that lookup. QMap always uses case
sensitive comparisons and a tiny inconsistency snuck into our code.
libdivecomputer names for the Aqualung dive computers i200C / i300C / i550C end
in an upper case C (as matches the official branding), but in btdiscovery.cpp
we have those names with lower case c. And therefore didn't recognize these
dive computers.
Obviously this is easy to fix by fixing those three strings, but I decided that
it was silly to set ourselves up for similar oversights in the future. So
instead I switched the matching of the descriptor to simply be allways all
lower case.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We do _not_ read them back, since they are calculated values, although I
guess we could aim to do that too at some point in case we have an
import from somewhere else that has these values but not the profile (or
gas use) to actually calculate them.
Fix test-cases that are checked by TestParse (but nothing else) to match.
Requested-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This warning is unnecessarily scary - we had a problem with parsing
multiple strings on the same line, but it should be all solved, and
while it does mean that people may have old incorrect git save files
with empty strings, scaring users about it isn't going to help.
And with the warning removed, we can just remove the whole test for an
empty string, because the normal code sequence handles that case just
fine.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To reset the core data structures, the mobile and desktop UIs
were calling into the dive-list models, which then reset the
core data structures, themselves and the unrelated
locationinformation model. The UI code then reset various other
things, such as the TankInformation model or the map. . This was
unsatisfying from a control-flow perspective, as the models should
display the core data, not act on it. Moreover, this meant lots
of intricate intermodule-dependencies.
Thus, straighten up the control flow: give the C core the
possibility to send a "all data reset" event. And do that
in those functions that reset the core data structures.
Let each module react to this event by itself. This removes
inter-module dependencies. For example, the MainWindow now
doesn't have to reset the TankInfoModel or the MapWidget.
Then, to reset the core data structures, let the UI code
simply directly call the respective core functions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This one is a bit hairy, because two things might happen if the
picture has a geo location:
- A dive gets a newly generated dive site set.
- The dive site of a dive is edited.
Therefore the undo command has to store keep track of that.
Oh my.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move the two functions create_picture() and picture_check_valid_time()
from dive.c to picture.c.
This might be somewhat questionable, as these functions are not purely
picture related, but check the nearest selected dives, etc. However,
dive.c is so huge, that slimming it down can't hurt. Moreover,
getting the nearest selected dive is more divelist- than dive
functionality anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If we want to make addition of pictures undoable, then create_picture()
must not add directly to the dive. Instead, return the dive to which the
picture should be added and let the caller perform the addition.
This means that the picture-test has to be adapted.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We can do the same with get_picture_idx(). Yes, it is a bit more
unwieldy. However a full reimplementation seems not worth it.
We could make this a one-liner helper function though.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The code is rather complex. Firstly, we have different representations
of pictures throughout the code. Secondly, this tries to do add the
pictures in batches to the divepicture model and that is always rather
tricky.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
By using a std::string instead of a C-string, memory management
becomes so much simpler! This class will be used for keeping track
of deleted/added pictures in the undo system.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Even though the functionality is seemingly trivial, this is a bit
invasive, as the code has to be split into two distinct parts:
1) Post undo command
2) React to changes to the divelist
Don't compile that code on mobile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This needs a slight change to the macro, because here we sort by
value type. Yes, from a C-programming point of view this is horrible,
however a decent compiler should just inline everything and not
pass around value types.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
A function that gets the index of a picture in a picture table
given its filename. Since we are going to identify pictures by
their filename, we will need this function in the undo code.
Use the function in the remove_picture() function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For consistency with equipment, use our table macros for pictures.
Generally tables (arrays) are preferred over linked lists, because
they allow random access.
This is mostly copy & paste of the equipment code.
Sadly, our table macros are quite messy and need some revamping.
Therefore, the resulting code is likewise somewhat messy.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since this doesn't touch struct dive, dive.c is not an appropriate
place for this function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The Bühlmann factors were cached in a thread-safe hashmap. It seemed
somewhat dubious that entering a critical section and doing a hash-lookup
would be significantly faster than a simple exp() call.
Indeed, in a very cache friendly test (16 entries, tight loop) calling the
factor() function 32 000 000 times from a different translation units we get:
- with cache: 604 ms
- without cache: 266 ms
Therefore, remove the cache. Given that 32 000 000 calls take only 266 ms,
it appears not sensible to try to optimize this function anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It was suggested in a review of a previous patchset that we should
capitalize the use of "use dc" to "Use DC" - but if we were going
to do that we should do it everywhere, not just in the one place.
This is the followup to do that.
Signed-off-by: Monty Taylor <mordred@inaugust.com>
In the code, the difference between SALTYWATER and SALTWATER is hard
to see. More importantly, in the UI - Brackish is the word for water
that has more salt that freshwater but less salt that seawater. The
docs already use the word to clarify what is meant.
These can be useful in a printed divelog, especially if the
log entry is also showing weight and exposure suit.
Signed-off-by: Monty Taylor <mordred@inaugust.com>
The DiveListView had a singleSelectedTrip function that
returns the selected trip if exactly one trip is selected.
This could be very slow if numerous non-trip items were
selected, because all the selection indices were back-
translated by the proxy model.
This could make selection changes very slow, because the
MainTab used said function to determine whether it should
show trip or dive data.. Indeed, with a 3500 dive test log,
when selecting all dives in tree mode, the updating of the
TabWidgets is sped up from 130 ms to 5 ms this commit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveListView would touch the selection-innards directly.
Let's encapsulate that. Moreover, take care to reset the trip
selection when resetting the core data.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In analogy to dives add a selection flag for trips. The reason
being that search for a selected trip can be painfully slow when
we do it through Qt's proxy model.
Make sure to deselect trips when they are removed from the core.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
No point in slurping in all of dive.h for translation units that only
want to do some time manipulation without ever touching a dive.
Don't call the header "time.h", because we don't want to end up in a
confusion with the system header of the same name.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This included QFile, which is fatter and not needed here. Include
QFile only in the actual translation unit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There appears to be no reason to slurp in all dive.h when compiling
membuffer.c. units.h might not seem like the perfect place, but it
is the most fitting I found.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For consistency: declare enumerate_dives as extern, since we do that
for all other C-functions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
No external caller of this function exists. Moreover, turn the return
type to void, as it only returned the passed-in plot_info and no
caller used that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It make debugging much easier if the function signature tells you
that a parameter is not altered.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When plotting profiles with surface segments, there were strange
artifacts. As we found out with Robert, these were due to the fact
that the calculated maxtime was set to the last event which is just one
second inside the surface segment. This terribly confused the profile
code. For example, it didn't properly allocate samples for the surface
segment.
Thus, when calculating maxtime, consider the last sample beyond the
last event.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When we had fixed-sized cylinder arrays, the planner used the last
empty cylinder for "surface air". This was not recognized by the UI
as a separate cylinder, because "empty cylinder" was the sentinel for
the end of the table. The conversion to dynamically sized cylinder
tables broke this code: everytime the surface segment is changed,
a new dummy cylinder is added, which is visible in the UI.
As a very temporary stop-gap fix, emulate the old code by creating
a cylinder and then setting the end-of-table to before that cylinder.
This means that we have to loosen the out-of-bound checks.
That's all very scary and should be removed as soon as possible.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This will be temporarilly used by the planner to mark consumption of
air at the surface. Do this by creating a new function add_cylinder,
which replaces add_to_cylinder_table() and takes care of always adding
a dummy cylinder at the end of the table. Make the original
add_to_cylinder_table() local, so that it cannot be accessed anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was used by the divelist to check wether a selection change is
programmatical or user-initiated. However, since there is only one
entry point for programmatical selection changes, this is not needed
anymore. Remove it - this removes an inter-module dependency.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We no longer use libusb to access USB devices on Android, therefore
there's no point including libusb in our build. Also, we have never even
attempted to run the tests on Android, so let's not even pretend to
support building them.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move this to the core so that desktop and mobile don't have
to call this explicitly. Matter of fact, mobile didn't call
this. It is unclear, whether that was even used on mobile,
though.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It makes no sense to keep the device nodes if all the other data
is cleared. Let's do this automatically and not explicitly.
This ensures that the function is also called on mobile.
Currently it was only called on desktop.
Weirdly, the parser-tests were expecting that the device nodes
were not reset by clear_dive_file_data() and therefore divecomputers
were accumulating in the test results. Thus, the additional
computers had to be removed from the expected test results.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The filter sets the maximum date to now. This is so confusing when
you manually add a dive and it isn't shown, because it is slightly
in the future. Add seven days, that should help.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This only checks the first divecomputer as the semantics for
multiple dive computers with different dive modes are not
clear. Should we check them all?
The implementation is a bit hackish: the indexes [0...n] of the
combobox are mapped onto [-1...n-1], where -1 means don't filter
and n-1 is the last valid dive mode.
Implements #2329
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Arguably, returning 0 for a dive with no cylinders is wrong, since the
0 is a valid cylinder id, however that cylinder doesn't exist. Instead,
return -1. All callers of explicit_first_cylinder() return early anyway
for dives with no cylinders.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since we removed MAX_CYLINDERS, we have the possibility of dives
with no cylinders. In such a case, setup_gas_sensor_pressure()
would do invalid read- and write-accesses. Therefore, return
early in such a case.
Reported-by: Chirana Gheorghita Eugeniu Theodor <office@adaptcom.ro>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Turns out that at least on Android libgit2 sometimes rejects valid
certificates. And I cannot quite figure out when and why. But since we
actually already checked the validity of the certificate when we called
canReachCloudServer() (and the Qt code handles certificates correctly),
we'll simply ignore this here and override the check to always return
true for our cloud server.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I would have bet money that Android used to send stderr to the logcat
log, but apparently it doesn't (anymore?). So in order to be able to
have a chance to debug weird cloud storage issues on Android, let's do
some wholesale replacement of fprintf(stderr,...) with our own version
of the INFO macro that we long ago borrowed from libdivecomputer (and
rename it to ensure we don't have a conflict there).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
free_plot_info_data() freed the pressure-data, but didn't set the
value to NULL. Thus, when the plot_info was reused, a double-free()
could ensue.
Crash condition: export the profiles of multiple dives with pressure
data.
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This will be used by the test to clean up test branches that are created
on the server. Since we aren't testing that functionality (it's not
something that Subsurface itself ever does) the helper prints out errors
it encounters, but doesn't report them back to the caller.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If you had one of the unfortunate local git caches with a local HEAD
just pointing to 'master', this will make note of that and then fix it
up to use the proper branch name in the cache repository.
[Dirk Hohndel: demoted from error to fprintf as most users won't care]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In create_and_push_remote(), we set up the remote tracking etc to use
the proper branch name, but never actually set up the initial local
branch for the new cache repository at all. So the repository would end
up with the default 'master' branch, instead of the branch name it
should have.
This went unnoticed, because most setups start by initializing the git
caches by cloning from the cloud, and that worked fine.
Debugged-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This fixes a crash: when the undo commands removed a dive from
the list, the fulltext cache was not cleared. If now the divelist
is reset and then the undo-command deleted, deletion of the owned
dive tries to remove it's fulltext cache, which doesn't exist
anymore.
For reasons of symmetry, when readding the dive, its fulltext
has to be registered.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When initializing the fulltext-cache and the dive-list, every
100 dives a notification was shown. I had a feeling that this
made startup significantly slower, but that could have been
purely psychological.
Therefore I measured and indeed, removing the fine-grained
notification, it becomes *significantly* faster. For a 3500
dives test log with mobile-on-desktop:
Initialization of the fulltext: 1350 ms -> 730 ms (-46%)
Initialization of the divelistmodel: 689 ms -> 113 ms (-83%)
Let's remove the fine-grained notification. There *is* a visual
indication of work-in-progress anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The compiler complained about this and it seems the
function does not need it.
Additional-test-suggested-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The planner does not know about events except gas
changes. But if the dive comes from the log, we
should preserve the dive computer events. At least
those that happend before we started to delete
waypoints to let the planner take over.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This fixes a bug: when deleting a picture when multiple dives
were selected, possibly the wrong dive was invalidated.
Thus, the dive wouldn't have been saved to the git repository.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
