This if'defs DC_TRANSPORT_* use with SSRF_CUSTOM_SERIAL, because the
enum doesn't exist when building against stock libdivecomputer.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The Bluetooth implementation doesn't work if SSRF_CUSTOM_SERIAL
is undefined. Therefore it is a good idea to remove it from
the UI if the libdivecomputer version is wrong.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the Bluetooth download mode was disabled then remove
the Bth address from the device or mount point section and
reset the index.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Save the dive computer download mode flag. In this way,
if the user used Bluetooth mode to download its dives on
his last session he doesn't need to open the Bth selection
dialog if he wants to use the same device.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Due to the new dive site management, we need to include this information
before transforming the XML to divelogs.de format.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need at least 23 columns when reading in Subsurface CSV.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Let's set the configs properly for Subsurface CSV import for better
usability. (Actually the only meaningful configuration is units as
others are discarded, but I could not figure out how to set that to
imperial when needed - what is the variable holding this information?)
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Showing the header line improves user experience quite a bit, even
though this configuration is actually discarded in the XSLT transform.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When adding APD2 import, the Sensus and Subsurface indexes should have
been increased by 1. While fixing this, switch to using enum names for
clarity.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The skipping of header field manipulation for APD was a bit too
aggressive, skipping the header fix up for all logs when on initial
state. Also, addition of APD2 was not taken into account.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In btdeviceselectiondialog.cpp ON and OFF strings need to be
translatables to avoid issues in the translation of the resulting
displayed string, as "turn on" and "turn off" translates to a single
word in most languages.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Changes to capitalisation to comply with coding style
Changes to make some blocks of english sound a bit better
Signed-off-by: Tim Wootton <tim@tee-jay.org.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
After an incorrect upload I can no longer fix the source tar on launchpad.
Oh well, so now Beta 1 is 4.4.96. No big deal.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The changes in commit 3bcb634e06 were a bit over ambitious. There was a
reason why I had this hack in place and preparing for the beta reminded me
of that. Oops. Oh well. The code is back, adapted for the current release
cylcle.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This enables enables you to configure a couple more settings in the
OSTC devices, roughly corresponding to the new ones that can be
configured in the OSTC3 devices.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This enables enables you to configure a couple of new settings in the
OSTC3 devices.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The DeviceDetails class is just a storage container for passing values
back and forth between backend and ui code. The different names between
the setters and getters just made it a pain to write nice macros and
keeping the two ends in sync, so this just removes the setters and
getters in favor of having the members public.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Small, Small screen. why are you still used today?
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And also show a warning to the user saying that that
action is non-cancelable.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Get the Qt data structures and convert to something
that we can use in our C - core.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We where showing the UID, wich didn't made sense.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So we can merge them later - currently we are showing
only the ID, ugly - fixing next.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a new widget on the dive site management view to
display all other dive sites at the same coordinates.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The UI detects when it should refresh the loction after the
user finished editting a divesite. Creating and editting
divesites is now working even when the current dive is not
saved yet.
Signed-off-by: Sander Kleijwegt <sander@myowndomain.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Update the tooltip and enable only when there is a divesite selected
Signed-off-by: Sander Kleijwegt <sander@myowndomain.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use clicked instead of activated signal on the completerList to
handle the selection of a divesite.
Signed-off-by: Sander Kleijwegt <sander@myowndomain.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A divesite uuid is created using the timestamp of the currently
selected dive. When there is no current_dive, use the current
time to create a uuid.
Signed-off-by: Sander Kleijwegt <sander@myowndomain.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If localDevice isn't valid we never initialize the discory agent, so
let's not dereference it in the destructor unless it is valid.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Continuing the crusade against excessive number of parameters for some
functions. This should be the last of the import functions to be cleaned
up.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
At least on Ubuntu with xfce instead of Unity this appears to be necessary
to get a menu bar for the application.
Fixes#833
Signed-off-by: Sander Kleijwegt <sander@myowndomain.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When, in a dive edit mode user entered a dive site
and went to dive site edit mode then finished the ds
edit, the app would lose the disabled property of the
dive list, making it possible to select a new dive
when we where editing another one, complete mess.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user clicks on the first or second option of the drop
down list, subsurface will move him to the dive site edit panel
automatically, since it's a new dive site and there's no information
about it yet.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we are in display dive mode, and then edit the
location text edit, going to edit dive mode, the location
text edit will be moved a bit below of it's original position
but the Dive Site List would be already opened, and stuck
on it's original position, covering the dive list.
This patch fixes that.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Moved the get taxonomy button from the maintab to the edit dive site
widget.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The get taxonomy button will be inside the manage dive site interface.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I didn't have time to create / finish the photos widget, so
I'm adding back the profile view while in dive site edit mode,
but disabling it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Right now this is quite ugly. And at least in my VM the transparency
doesn't seem to work correctly. But at least we now have some visual
indication that we are doing something while opening or saving cloud
storage.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
