Relatively straight forward, just a handful of places where we call
show_error() (a UI function) from the logic code. In the process I noticed
a few places where error returns weren't dealt with correctly.
Added a new planner.h files for the necessary declarations.
This should make no difference to functionality.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Most of the warnings are IMHO false positives:
e.g.: an enum variable is initialized in a switch statement that has a case for
each possible enum value - yet gcc 4.8 warns that it could be used
uninitialized;
or: two variables are initialized together in the code - second one of them
is previously initialized to -1 at declaration time, both are initialized
in an if (second one == -1) clause - so they are guaranteed to both be
initialized...
I did not "fix" those as the code is actually correct.
But there are three spots where it catches things that could indeed go wrong
(with odd input data in one of them).
This commit also adds a check to only call g_type_init() for older versions of
glib as in newer ones it is deprecated.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Most of the warnings are IMHO false positives:
e.g.: an enum variable is initialized in a switch statement that has a case for
each possible enum value - yet gcc 4.8 warns that it could be used
uninitialized;
or: two variables are initialized together in the code - second one of them
is previously initialized to -1 at declaration time, both are initialized
in an if (second one == -1) clause - so they are guaranteed to both be
initialized...
I did not "fix" those as the code is actually correct.
But there are three spots where it catches things that could indeed go wrong
(with odd input data in one of them).
This commit also adds a check to only call g_type_init() for older versions of
glib as in newer ones it is deprecated.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Relatively straight forward, just a handful of places where we call
show_error() (a UI function) from the logic code. In the process I noticed
a few places where error returns weren't dealt with correctly.
Added a new planner.h files for the necessary declarations.
This should make no difference to functionality.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is based on several commits from Tomaz - mingled together and mildly
extended by Dirk (mostly Makefile hacking).
All Qt UI related stuff should eventually move into the qt-ui directory.
So the Makefile rules for moc and uic have been adjusted accordingly.
The MainWindow class has been moved into its own file in qt-ui (but just
with a placeholder, the existing class has simply been ifdef'ed out in
qt-gui.cpp for the moment).
We still have a couple of Qt things in qt-gui.cpp in the main directory...
all this needs to move into the qt-ui directory and be built with separate
.h files. Right now we have the one-off Makefile rule to create the
qt-gui.moc file from the qt-gui.cpp file.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is simplistic & brute force: any function that touches Gtk related
data structures is moved to divelist-gtk.c, everything else stays in
divelist.c.
Header files have been adjusted so that this still compiles and appears to
work. More thought is needed to truly abstract this out, but this seems to
be a good point to commit this change.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove the boolean parameter from parse_file; the code is more readable
by having an explicit call to set_filename() where necessary, rather
than a boolean parameter.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Alberto Mardegan <mardy@users.sourceforge.net>
This is simplistic & brute force: any function that touches Gtk related
data structures is moved to divelist-gtk.c, everything else stays in
divelist.c.
Header files have been adjusted so that this still compiles and appears to
work. More thought is needed to truly abstract this out, but this seems to
be a good point to commit this change.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When diving in areas where there are risk of boats passing above you,
its common practise to do the last stop at 6m to better stay out of
harms way. When doing o2-deco, it doesn't matter for the deco time if
you are doing all the time at 6m, due to that you don't have any inert
gas in your breathing gas.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is just an empty window with a File menu and a few items.
It shows how to hook up functions to menu actions.
Signed-off-by: Alberto Mardegan <mardy@users.sourceforge.net>
Remove the boolean parameter from parse_file; the code is more readable
by having an explicit call to set_filename() where necessary, rather
than a boolean parameter.
Signed-off-by: Alberto Mardegan <mardy@users.sourceforge.net>
The previous rules were conflicting, and the naming of the moc-generated
file to be included in .cpp files was deviating from what's most used in
Qt: the usual way is to
#include "file.moc"
and not
#include "file.moc.cpp"
Signed-off-by: Alberto Mardegan <mardy@users.sourceforge.net>
This prevents Qt headers from defining macro symbols such as "emit" and
"signals", therefore avoiding conflicts when struct members with the
same names are defined in some C header.
Signed-off-by: Alberto Mardegan <mardy@users.sourceforge.net>
The signatures for subsurface_get_conf* in windows.c and macos.c
was slightly different from those in linux.c, which broke the
build (at least on Mac).
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instantiate a QApplication and let Qt handle the event loop.
Add a QTranslator subclass to translate the UI via gettext.
Signed-off-by: Alberto Mardegan <mardy@users.sourceforge.net>
Rename gtk-gui.c to qt-gui.cpp, and make the necessary changes so that
the project still builds.
Signed-off-by: Alberto Mardegan <mardy@users.sourceforge.net>
Setup the build variables for building with QtWidgets, and add rules for
processing the Q_OBJECT macros with moc and generate widget code from
.ui files with uic.
Signed-off-by: Alberto Mardegan <mardy@users.sourceforge.net>
The pressure interpolation code mostly worked for the simple cases, but
got terminally confused for some more complex gas change situations,
resulting in nonsensical interpolations.
This simplifies and clarifies the code a bit, and in the process fixes a
few special cases where the gas interpolation segments didn't end up
having the end conditions set.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
They do the "02=0 means air" thing autmatically, and make for less
typing. So use them more widely in places that looked up the o2 and he
permille values of a gasmix.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
get_cylinder_index() looks up which cylinder to use based on the
gaschange event that describes the mix. However, it was both buggy and
not very good.
It was buggy because it didn't understand about our air rules, and it
was not very good because it required an exact match (after rounding our
permille-based numbers to percent).
So fix it to use the right permille values, and look for a closest match
(using the normal sum-of-squares distance function - although I wonder
if we should consider helium percentages to be "more important" and give
them a stronger weight).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
.. so that different computers that have different ordering of the same
cylinders will see the end result the same way.
This also fixes up the sample sensor index and generates special initial
tank change events for the dive computers that had their cylinder
indexes renamed on them.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In planning you usually plan lengths of segments rather than runtimes to
leave a level.
This patch superseeds a previous one with a similar name and (even more)
broken spacing.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In save_window_geometry() use gdk_window_get_state() to retrieve
the window maximized state and store it in the user configuration.
Then in restore_window_geometry() restore the maximized state with
gtk_window_maximize(), if needed.
To achieve good results we also need to override "window-state-event"
for the main window and define an extra couple of configuration parameters:
"vpane_position_maximized" and "hpane_position_maximized".
Then store two different pane states for maximized and restored window each
time the user makes a switch.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Valid divelogs.de export might contain non-ascii characters in CDATA
fields as long as these characters are found in iso-8859-1. So we'll
have to test to make sure the content is fully ascii before calling
xmlStringLenDecodeEntities to decode possible character references.
Acked-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some colors such as the ones for ceiling were still green on B/W
print. This patch makes all colors in the second row
of profile.c:profile_color monochrome.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While working on UDDF export I noticed that the grabbing of last
sample pressure was not working properly. This will fix it for DLD
export.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Examples on UDDF specification indicate that pressures are reported in
Pascal. Also prefer the sample data from first dive computer for start
and end tank pressures.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch generates a gases section on UDDF export. The section
consists of all the unique gas mixes sawn on the dive log.
The latter part includes events to the export. Gas change and heading
events are properly translated to respective UDDF naming. Other events
are copied over as is. Some of the events are the same (ascent, deco,
rbt, surface) in UDDF some are not available.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The window which holds the custom print options tab appears to have
unchangeable dimensions on Windows OS (unless hacked in some way).
This makes the sliders in the custom tab not accessible unless
we add the entire dialog into a GtkScrolledWindow and return that
for the "create-custom-widget" event.
The patch also makes the contents of the "Layout Options" frame
packed vertically (with a GtkVBox) instead of horizontally, so that
the entire tab contents are "mostly" scrollable vertically instead
of horizontally.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also make the profile border color the same as the depth grid color.
Fixes#97
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This replaces the hardcoded sizes all over the sources.
Make the size in the text_render_options_t a double - With this you can
compile Subsurface with
make CLCFLAGS=-DTEXT_SCALE=1.5
and the fonts in the profile are 50% bigger. Very nice on a high-pixel
density display.
Also remove the unused text_render_options for event text.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch implements exporting dives from Subsurface to UDDF format.
Events and cylinder info are the most remarkable things still missing
from the export.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While colorButton defaults to "color" in first access to print menu, it seems
preferable to keep the last state selected by the user. At least until exit session.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
close() should be included from unistd.h, instead of fcntl.h for
better portability.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
92.5 is wrong the correct divisor is its inverse number 108.1
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While it makes sense for the program to have a 7.5% fixed header, from a
user perspectice this is just odd. So instead we now have the notes,
profile and tank data sizes add up to 100% and scale the information when
it is combined with the header.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
To make this easier I created a new helper function create_label that
takes printf style arguments. I assumed this would be usable in many
places but ended up finding just one other obvious use for it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds support for UDDF version 3.1 as produced by at least
DiversDiary. Basically we have to include the different name space into
our selections.
This patch also checks if the temperature is zero on all samples and
skips temperature readings if it looks like the dive computer does not
record them.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We can trim the printout with only profile and tanks sliders, so add an
insensitive scale for notes which report the percentage that it's is
getting while changing the others, for informative purposes.
Initialize default values for print_options struct.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Gtk complains if there is no GCallback to connect.
Fixes too a bug with gtk_toggle_button_set_active for radio5.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Define a new frame wich will englobe the layout options.
1.- Move to this frame the color profile printing by Amit
2.- Add an option which switches the position of the profile and a
predefined block comprensive of header, tanks data and notes.
- Divide print() in two macros PROFILE_BLOCK and NOTES_BLOCK
- Add a gboolean to print_options. If unselected (default) we
get the actual disposition. If selected, switches blocks.
3.- Add two buttons with labels to set the height of the profile, and tanks.
We select the percentage of layout occupied by each option, reserving
7% for the header (non adjustable), and assign the rest to notes.
- Values in % have got hardcoded min/max (e.g. being the
profile a major feature of subsurface, would be meaningless
make it < 37%)
- The values are initialised to the actual ones, so leaving
them untouched defaults to the old printout.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As logical extension of the ability to add bookmarks and gas changes this
adds the ability to remove (any arbitrary) event that happens at the mouse
position (specifically, that is within +/- six (scaled) pixels around the
x-position (time) of the mouse). That's the same width that the triangle
marker occupies which was moved to be centered around the event time in
commit 5752e9742e86 ("Finetune event triangle position to have the top
point at the event time").
Fixes#60
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use the infrastructure created for manually adding gas change events to
also be able to add bookmarks.
[Dirk Hohndel: This combines two commits for clarity. I also cleaned up
the indentation and changed the code to no longer print the
exact same text twice.]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
