Previously the heading information was on bookmark event, but now we
trigger a heading event when direction info is available.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Gas with index 0 is assumed to be the first gas only if there is no
gaschage event in the first 30 seconds of the dive.
[Dirk Hohndel: minor formatting change in a logical expression]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Here is a patch that restricts the gases listed in the divelist to those
that are actually used. I seem to have the indentation now under control
but I am not sure about the logic:
1) First gas (with index 0) is always used.
2) If there is a gas switch event, the new gas is also used (determined by
walking the list of dive computers and then the list of events).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Create a little widget that lists all the gases / tanks we know about and
allow the user to pick one of them.
Turns out that add_event only added events at the end of the list - but we
treat that list as chronologically sorted. So I fixed that little
mis-feature as well.
This does raise the question whether we need the inverse operation
(removing a gas change). And if there are other things that we should be
able to manually edit, now that we have the infrastructure for this neat
little context menu...
See #60 -- this doesn't address all of the issues mentioned there, but at
least deals with the 'headline' of the feature request...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is completely bogus as all it does is print out the corresponding
time for the spot we right-clicked on the profile. But that at least shows
that the infrastructure is working as intended...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Seems that we have to NULL terminate the buffer for
xmlStringLenDecodeEntitites() as otherwise we might end up having extra
data at the end of returned buffer. (Somehow the length parameter is
not respected always, even if it is the proper size returned by the
zip_fread() - header_skip).
Also free the buffer returned by xmlStringLenDecodeEntitites().
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The separator was printed if SITE had data, even if LOCATION was empty.
Now print the separator only if both of these contain data.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The zip_int64_t type appears to be missing with mingw so it breaks my cross
builds - and this is clearly equivalent.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
divelogs.de sends us XML files that explicitly state that they are in
ISO-8859-1 encoding (which is true). These files contain the HTML encoded
Cyrillic characters. Once we decode those characters the resulting file is
actually UTF-8 encoded (which is a superset of ISO-8859-1). That seriously
confuses libxml when it tries to parse things.
So instead recognize divelogs.de files and skip the encoding declaration
for them before decoding the HTML encoded non-ISO-8859-1 characters.
This does show, however, that divelogs.de incorrectly truncates the
encoded strings (at least in some sample data that I created the parsing
throws errors because of that).
Reported-by: Sergey Starosek <sergey.starosek@gmail.com>
Based-on-code-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We grab the pressure information from samples, if available. Otherwise,
we use information from first cylinder.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The callback function for switching colour printing on/off was
registered after the initial activation of the button. This meant the
first attempt to print was compromised. We move the registration so that
printing works as the user specifies from the first attempt.
Tested by printing both B/W and colour images to file with minimal mouse
clicks.
Spotted by Salva - thanks.
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to have CDATA around text fields to support e.g. Cyrillic
alphabet.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit 6044c22741 wrongly assumed that a disabled .po file had a companion
.disabled file instead of an .aliases file.
Running make after "tx pull -af" generated errors which I tried to fix. I
shouldn't have, because the Makefile did the right thing. It warned about a
missing .aliases file for a brand new translation.
So, I'm reverting the commit and use "tx pull -f" instead the next time I
need to test existing translations.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Disabled translations have a .disabled file instead of
an .aliases file. Without this patch I couldn't make
subsurface after a tx pull (when testing translations).
This patch makes the .aliases file an explicit requirement
for a valid translation.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The password is handled in clear text and stored in the config as such.
Some people might object to that...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This has no user interface and hardcodes a testing username / password.
But it can successfully create a DLD file (thanks to Miika and Lubomir)
and then uses libsoup to upload that to the server.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- Add a button and callback to the print dialog to let the user select
color printing.
- Add a state variable to the options struct to track the users choice.
- Use a darker color for the grid on dive plot; that way we can see it.
- Default to use color printing.
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
patch contains:
- replacement for open_memstream()
- storage of the temporary zip file in the OS temporary directory
- replacement usage of mktemp() with g_mkstemp()
patch based on work by Miika Turkia.
[Dirk Hohndel: as suggested by Miika I commented out the deletion of the
DLD file]
Acked-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Ensure that Kfreebsd and HURD are recognized as "like Linux"
Signed-off-by: Sylvestre Ledru <sylvestre@debian.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Summing up weights ended only when there was one parameter left. With no
parameters we ended up in an infinite loop. Now we end also in case of
no parameters.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This generates a .DLD file of selected dives to be uploaded to
divelogs.de. The actual upload functionality along with sensible user
interface is still to be implemented. However, the resulting file from
this patch is tested to work (as far as I can tell) using upload API of
divelogs.de.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The resulting divelogs.de formatted XML is then to be zipped and
uploaded to divelogs.de website.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
draw_table():
When get_dive_for_printing() returns NULL, instead of
breaking, we should 'continue' trough the entire loop. Otherwise
the paginate() handler will be called dive_table.nr times, until
it returns TRUE.
Fixes a bug where, for example one selected dive can end up allocating
dive_table.nr pages for printing.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In 'table print' for some launguages the table header titles can span
on two lines and the text on the second line ends up overlapping with
the table border. With this patch two lines are reserved for the table
header instead of one.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Strangely on Linux everything looks fine, but Windows shows the header
two times on the first page, which is due to the pango_cairo_show_layout()
function being called both for the 'paginating' and 'regular' stages
in show_table_header().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
dac29e7bc4 introduced changes to how the GPS coordinate string
is parsed; we now prefer to parse decimal numbers using the '.'
character.
This patch makes modifications to info.c:print_gps_coordinates(),
where we are still using a locale dependent method for converting
a double to string - snprintf(). Instead, we attempt to use GLib's
g_ascii_formatd(), and store the resulted strings into two
buffers named 'dbuf_lat' and 'dbuf_lon'. We then pass the buffers
to the final snprintf() formatting with '%s'.
Reported-and-tested-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The introduction of GtkComboBoxText usage for selecting a map provider,
removed support for older versions of GTK on distros like Debian 6.0.4.
Parent class (GtkComboBox) methods have to be used instead, around
more pre-processor branching.
This patch also fixes a small memory leak when retrieving text from said
combo box.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Seems that DM4 has useless cylinder size data on global level and real
data on DiveMixture table. So using the correct data instead of the
global un-used value.
Similarly the DiveMixture table contains cylinder pressures. However, it
appears this information is available on DiveMixture table only in some
cases. So we use start and end pressures from DM table if available,
otherwise we use the global pressures. (My guess is that the DM table
has the pressure info only when the pressure has dropped from the
initial pressure reading that is reported in Dive table before the dive
is considered to have started.)
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The range is still very wide (as we get both air and water temperatures),
but it will at least eliminate some completely bogus outliers.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
merge_text() could call strdup(NULL) if one pointer was "" and the other
NULL. This commit fixes that.
Reported-by: fhuberts
Analyzed-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Localization could be causing floating point numbers to have a comma
instead of a decimal point (in a file format that is really stupid).
If we detect this we replace the comma with a decimal point instead, and
try to re-parse the number, and see if we get further.
The downside of that is that we're changing the buffer we get passed in.
Nobody cares, but still, it's kind of ugly. It's simple, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move the view submenu to a top level location.
Alter the wording of File|Import to drop XML qualifier; we import more
formats than this.
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Testing the Planner in Subsurface on a Windows XP SP3 installation,
shows corrupted UTF-8 strings in the case of Cyrillic locales, but
possibly others as well. Instead limited to the Planner, this affects
the entire application.
After some examination it appears that <ctype>'s isspace() in MSVC
on the tested version of Windows is broken for some UTF-8 characters,
after enabling the user locale using: setlocale(LC_ALL, "");
For example, characters such as the Cyrillic capital "BE" are defined as:
0xD091, where isspace() for the first byte returns 0x08, which is the
bytemask for C1_SPACE and the character is treated as space.
After a byte is treated as space, it is usually discarded from a UTF-8
character/string, where if only one byte left, corrupting the entire
string.
In Subsurface, usages of string trimming are present in multiple
locations, so to make this work try to use GLib's g_ascii_isspace(),
which is a locale agnostic version of isspace().
Affected versions of Windows could be everything up to XP SP3,
but not apparently Vista.
Reported-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Translate decimal commas on XML import to decimal points. (As detected
from available sample files using Linus' debug printing.)
Also check for empty values on MacDive temperature import.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instructions how to find the effective database file from DM4, using
this method there is no need to rename the backup as the original file
works as is when found from a random directory structure.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Seems that the database can contain either null or empty string when
there is no pressure data available. Changing the pressureblob
validation to reflect this new information.
Since the temperature profile is binary data, we most likely should
accept 0 as a valid value. My samples have null in this blob if there is
no data so it seems to be different than the pressure blob. But of
course there are no guarantees...
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Even though the documentation states to rename DM4 backup to .db file
extension, accept the default .bak extension as well. This, however,
does not enable the .bak extension in file selection dialog (so .bak
files must be given as command line parameters).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should take care of locale caused problems when the input uses decimal
point but locale uses decimal comma. Also the sample I have of Suunto DM3
format weight is represented with comma instead of dot so converting that as
well.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I got a few more events from a new sample database. Bookmark heading is
now shown if such information is stored. Also the unknown events display
the event number for easier identification.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There is a small API note on GetModuleFileName(), which says:
"Windows XP: The string is truncated to nSize characters
and is not null-terminated."
Which means that on XP it will be only safe if we pass a zeroed
buffer to it, otherwise the next call to wcsrchr (which is
a strchr for wchar_t) may not find a relative terminating \0 in
the buffer, returning a wrong pointer and resulting in a corrupted
string.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When an executable is started on Windows, it has a "Working
directory". This directory for a program shortcut stored on the
Desktop can be different than the actual executable directory.
This also applies if a shell extension is registered to that
executable (in the case of Subsurface that could be a .DLD file).
When another process simply "executes" a file with a certain extension
(e.g. when you double click on a .DLD file), a method ShellExecute
is called, which without explicit parameters sets the "Working
directory" to the .DLD file directory. This can be a bit of a trouble
if the executed module depends on relative paths (e.g. ./xslt, ./share).
To solve that we obtain our module full path and filename using
GetModuleFileName(), strip the filename from it (e.g. subsurface.exe)
and then pass the resulted string to SetCurrentDirectory(), which
updates the "Working directory".
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The user-manual.txt file limits its own scope to usage and points to a
non-existant "build manual." Make clear that we really mean the README file.
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Basic functionality is implemented but at least support for multiple
cylinders is missing. Event/alarm support is only partial.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- Made a few small changes to user-manual.txt to inprove readability
in English
- Made reference to Map Provider selection in 'Preferences'
Signed-off-by: chris <chrislewis915@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Updated for version 3.0.2 (unfortunatelly not in time)
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
