The selection logic was a bit random: some places would return NULL if
the dive computer index was out of range, others would return the
primary dive computer, and actually moving between dive computers would
just blindly increment and decrement the number.
This always selects the primary computer if the index is out of bounds,
and makes sure we stay in bound when switching beteen dive computers
(but switching between dives can then turn an in-bound number into an
out-of-bounds one)
Fixes#464
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I had intended to amend the previous commit with this before pushing it
out. This changes the comment that pointed out the bug that the previous
commit fixed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Turns out we unconditionally set all events as visible when redrawing the
dive - even with a comment that this should take into account if the event
is visible. Oops.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This got lost when we switched to the new profile.
Remove event works. Hide events does call hide() on the DiveEventItem but
for some reason it stays visible. I'll hope for one of the more
experienced Qt people to fix that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user tries to delete a cylinder that is in use and that action is
rejected, the cylinder widget (and the whole dive) should not be put into
edit mode. After all, nothing changed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We always checked if the tank was in use by the planner / dive editor -
even if we were not in dive edit mode.
With this patch, when not in dive edit mode, we check our cylinder "used"
flag instead.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Especially in O2 decompression parts of a dive, the pp02 is typically very
close to the threshold value (normally 1.60 bar). The old implementation
of the pp profile graphs assumes that there is exacty 1 consecutive set of
samples that needs to be in the "warning color". This results in an
erroneous display of the mentioned graphs, connecting multiple episodes of
too high pp with bogus lines in between.
This fix generalizes the pp graph logic to allow for multiple segments of
high pp, each to been drawn seperately in the "warning color".
Signed-off-by: Jan Mulder <jlmulder@planet.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The "report_error()" interface is a lot simpler, although some of the
C++ code uses QStrings which make them a bit annoying, especially for
the varargs model. Still, even with the explicit conversion to UTF8 and
"char *", the report_error() model is much nicer.
This also just makes refreshDisplay() do the error reporting in the UI
automatically, so a number of error paths don't even have to worry. And
the multi-line model of error reporting means that it all automatically
does the right thing, and reports errors for each file rather than just
for the last file that failed to open.
So this removes closer to a hundred lines of cruft, while being a
simpler interface and doing better error reporting.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes the error string just be an internal "membuffer", which the
GUI can fetch and show when errors occur. The error string keeps
accumulating until somebody retrieves it with "get_error_string()".
This should make any write errors actually show up to the user.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This at least avoids marking the dive list as unchanged on a failed
write, and propagates the error further up the stack.
We still don't show the error string in the GUI, though. I'll start
doing that next, I think.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes subsurface remember the git source commit of the dive data.
If you save to an existing branch, subsurface will now complain and
refuse to save if you try to save if the existing branch is not related
to the original source. That would destroy the history of the dive
data, which in turn would make it impossible to do sane merging of the
data.
If you save to a new branch, it will see if the previous parent commit
is known in the repository you are saving to, and will save parenthood
information if so. Otherwise it will save it as a new parentless commit
("root commit" in git parlance).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
By simply storing the coordinates based on the scene (instead of trying to
map them to real coordinates) the overlay position is correctly restored.
Also remove the redundant positioning before readPos is called.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a bit tricky because we are using a plain widget for
a window and don't have a class for it (req. more source files).
Also for the table model to update we need to create a new
YearlyStatisticsModel instance each time. At least, in that regard
we can re-create the model each time refreshDisplay() is called.
This patch adds a couple of private variables that are used
to manage the memory of the yearly statistics model and window
and also close that same window on MainWindow::closeEvent().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The topmost Z order of items in the profile should be:
- background (poster / logo)
- toolTipItem
- rulerItem
...
This mostly fixes the ruler being under other elements.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A couple of problems with the ruler:
- the rotated text doesn't look very well at all and interpolation doesn't
help it much
- measuring towards the right most part of the profile makes the text go
out of the screen
To solve these issues and attempt to improve the ruler this patch does the
following:
- place the text at the bottom of the lowest of the start and end points.
this way the line will never intersect with the text
- clamp the x position, so that the text doesn't ever leave the screen
horizontally
- place a white background behind the text so that it will cover text and
graphics under the ruler item
(TODO: place the ruler on top of everything else)
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For most dialogs it would be much safer to make them Qt::WindowModal to
the parent (MainWindow).
For now we are not doing this for the preferences dialog as there are
situations where the user might want to be able to move it around and even
interact with the main window.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The animation appeared when the user started subsurface with a default
file, wich was a little annoying since it didn't had a 'from' position
to go and it was also increasing it's size on some window managers
that do subtle windows animations when a program starts. This patch
treats the first dive opened when the program loads with a divelog pa
rameter differently as the following ones storing the velocity value
on a temporary, and reassigning it later.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
User can now fine-tune the animation speed on the preferences,
a value of zero disables it completely.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is very userfull for a ( yet to be implemented )
preference dialog about the animation speed, so the
user can enable / disable the animations or make it a bit
faster for it's taste.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Once the poster is displayed when there are no dives in the list,
we may also want to disable the QToolButtons (PO2, SAC, etc..),
until a new dive is loaded and the profile is redrawn.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is useful if we have more non-modal windows and we want
them simply to close with the main one without explicitly
creating class member variables to point to such instances.
A practical example would be the debug window created in
ProfileWidget2() (diveDepthTableView) which holds
the depth profile values.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Currently when user wants to add a new dive information,
the ways to know what unit system is being used are
- Through preferences panel.
- Save the dive information, which displays units in
the text field.
This patch provides an option to the user to show current
unit system by displaying the unit on the side of the label
when the user is editing the fields.
This feature can be enabled or disabled by using the new
checkbox option i.e. `Show units in text labels` included
in `preferences->units` section.
Signed-off-by: Lakshman Anumolu <acrlakshman@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So this is totally unrelated to the git repository format, except for
the fact that I noticed it while writing the git saving code.
The subsurface divetag list handling is being stupid, and has a
initial dummy entry at the head of the list for no good reason.
I say "no good reason", because there *is* a reason for it: it allows
code to avoid the special case of empty list and adding entries to
before the first entry etc etc. But that reason is a really *bad*
reason, because it's valid only because people don't understand basic
list manipulation and pointers to pointers.
So get rid of the dummy element, and do things right instead - by
passing a *pointer* to the list, instead of the list. And then when
traversing the list and looking for a place to insert things, don't go
to the next entry - just update the "pointer to pointer" to point to
the address of the next entry. Each entry in a C linked list is no
different than the list itself, so you can use the pointer to the
pointer to the next entry as a pointer to the list.
This is a pet peeve of mine. The real beauty of pointers can never be
understood unless you understand the indirection they allow. People
who grew up with Pascal and were corrupted by that mindset are
mentally stunted. Niklaus Wirth has a lot to answer for!
But never fear. You too can overcome that mental limitation, it just
needs some brain exercise. Reading this patch may help. In particular,
contemplate the new "taglist_add_divetag()".
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user has zoomed in but then changes to a new dive,
we may want to reset the scale back to the original value (1.0)
based on the current zoomLevel, so that the profile is not stuck
in zoomed mode.
This patch adds a snippet that resets the QGraphicsView scale,
zoomLevel variable and also the toolTip position.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a new image resource named poster.png which,
is shown instead of the 3 posters. The main reason for that
is due to the poster text not being visible. This new image
is pretty much the Subsurface logo only.
It also removes the grid lines, while the poster is visible.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Such can be disabled with -Wno-reorder and are clearly
more of a nuisance, but C++98 12.6.2.5 says the order should be
the same as in the class declaration.
On theory this would only speed the compile times a tiny amount.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We had all in place, all that was missing was to actually load
the position stored on the settings for the tooltips.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code cleanup fixes the two issues that I raised on
my last e-mail. hurrah.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes the colors on the new profile, the init of the colors map
was not being done. This fixes it.
A few problems were spotted on the new profile dealing with the ruler
graph and a newly added dive, when using the dive add dialog.
I'll be on it later.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is just removal of dead code from the old profile, probably there's
still a bit more to remove, but this is a very good cleanup already.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is simply a code removal, nothing was touched besides the
profilegraphics.h/cpp files.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch partially removes the code for the old profile from
Subsurface. It removes the use of the old profile on the mainwindow,
but keeping the code in the tree for now.
A bit of code-cleanup also entered this commit because I had to change
every instance of the code that used the old profile.
Now to the real code-cleanup
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The ruler is a weird beast - it has two child objects that access the
parent to call another function, that call the child functions.
When I updated the plot_info I didn't take that into consideration, what
happened is that when I set the parent's plot_info, the children's
plot_info are still invalid, but the update method is called anyhow.
This patch updates all plot_info's before calling anything else.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We can't keep the cache around (even though it's tempting) as the next
iteration might change the start time of the planned dive or other
parameters which would make the cached data invalid.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
clang-format doesn't appear to reindent multi line #define statements
correctly - so this hopefully will clean those up.
The included whitespace corrections to the code should stay in place when
using the updated tool.
This includes cleaning up some multi-line comments that were messed up the
last time around as well as a few other minor changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- Move the buttons of the profile window around to have more sane positions.
- All the buttons affecting the ceiling(s) are now grouped together.
- All the buttons affecting the Information Box are now grouped together.
- The previous icon for "Show calculated ceiling" has been reassigned to
"Show all tissues"
- A new stand-in button hav been included for "Show calculated ceiling"
Signed-off-by: Willem Ferguson <willem@willem-Precision-M4700.(none)>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I'm not sure about this one. It's possible that there's something
happening behind the scenes that I don't understand. But let's just
initialize this to 0 and be sure.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
tissue_tolerance wasn't used after it was assigned.
type was overwritten after it was assigned.
serial was overwritten after the last /= 100.
event is assigned in the for loop.
clear isn't used after the assignment
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Decrease depth by tapping left part of widget. Icon is showing "up" (i.e. closer to surface).
Increase depth by tapping right part of widget. Icon is showing "down" (i.e. deeper).
Fixes#354
Signed-off-by: Andrey Zhdanov <andrjufka@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Minor change to the perl postprocessing script and resulting changes to
the affected source files.
This deals with two issues:
- "foreach"-like structures were not always treated correctly
- some longer calculations that ended on "+ constant" were reformatted in
a rather unatractive manner
In one source file (divelist.c) I ended up adding braces to the sources...
trying to cascade the indentation further down without having the block
there seemed a lot more trouble than it's worth.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Non-stop Dive Limit (or No Deco Limit) abbreviation is not NTL but NDL
Signed-off-by: Giuseppe 'ferdy' Miceli <ferdy@ferdy.it>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Partial pressures abbreviations should have capitalized chemical element
symbols e.g. pn2 -> pN2
Signed-off-by: Giuseppe 'ferdy' Miceli <ferdy@ferdy.it>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit c84ef319a2 ("Create a toolbox on the left side of the new
profile") Tomaz invented a new TLA: EED.
No one noticed. Oops.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previous code just set the button-"status" based on what we stored on
the settings. This sets the corresponding value in our prefs-struct.
This fixes the same issue as in 63f7f3, without the side effect of
magically hiding the mean depth line.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This reverts commit 63f7f37e46.
For odd reasons this appears to make the mean depth line disappear. This
will require some further analysis, but for now I'll just revert it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch will remove all files that fail to parse from the recent
files menu.
Signed-off-by: Joshua Wambua <joshua@megvel.me.ke>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I know everyone will hate it.
Go ahead. Complain. Call me names.
At least now things are consistent and reproducible.
If you want changes, have your complaint come with a patch to
scripts/whitespace.pl so that we can automate it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This changes the ruler a bit, I hope nobody gets offended by it. :)
The main issue is that the scene is now 100x100 pixels wide, so the font
was *really* huge. and setting itemIgnoresTransformations on the ruler
broke a lot of stuff.
I removed the code that painted the text and created a QGraphics TextItem
for that - that will hold the text for the ruler.
Then I played with the view to get the correct angle of the line, that was
in scene coordinates and thus, could not be used directly on the item that
had ignore transformation changes.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is needed so the underlaying struct preferences prefs, will be
updated when we set the buttons to there previous state after we
loaded the settings.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes the ruler work again, the problem is that the fonts are
*terribly* big, I'll fix that on the next commit.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Increased vertical spacing between spinboxes and checkboxes for the manual
CVS import dialog
Fixes#448
Signed-off-by: Alberto Corona <albcoron@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch toggles on / off the ruler via QSettings.
When the user clicks on the toolbar, this sets the settings to true /
false, in a way that if the user turns Subsurface on/ off, we still get
the last choosed option.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds the RulerItem inside of the new profile, and already takes
settings into consideration.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch removes the GC macros and change the calling to use the
DiveCartesianAxis.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch just creates two files for the rulerItem, a .h and a .cpp.
nothing was done to make it visible on the new profile yet - will do that
on the next commits
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Just quick'n dirty glue code so that when the user clicks on the 'scale'
toolbar item, the new profile graphic is scaled.
Lovely thing: Animations for free. <3
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes the 'Zoomed Plot' a preference that can be stored and
retrieved, this way if the user sets the plot to be 'zoomed', this
information will persist even if they closed or opened subsurface again.
Also, added the 'Scale' button on the new profile, but didn't did the glue
code yet.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Default font was hardcoded as 14.
What happen if you change any other preference value is that the
application would start to use fontSize=14.
This commit loads the right value in the QDoubleSpinBox
Signed-off-by: Danilo Cesar Lemes de Paula <danilo.eu@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
if the user tries to redownload something from its dive computer
the interface will be stuck since progress_bar_text won't be empty in
the second run.
Even if I don't really like this idea of that value being changed by
downloadfromdivecomputer.cpp and libdivecomputer.c, that value needs to
be reset by someone.
Signed-off-by: Danilo Cesar Lemes de Paula <danilo.eu@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Simple patch to enable/disable extra buttons while downloading.
The UI should be blocked during the download.
Signed-off-by: Danilo Cesar Lemes de Paula <danilo.eu@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to use the transform() of the view, not the tooltip.
Suggested-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This appears to correctly add the tooltip to the event item, but for some
reason the tooltip isn't displayed for most events.
Still needs more work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows us to give it a different color (red) and make it a smaller
size.
While implementing this I also fixed the size of the temperature text in
the new profile.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This also fixes the whitespace in a function that I instrumented to figure
out what's going on. I restored it to its original state, but I couldn't
leave the whitespace unfixed...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Admittedly this code doesn't do anything useful right now, but at least
have it not to anything useful in the right spot.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For reasons that I don’t understand, the image is only shown if the event
happens to be at the same time as a depth sample. This is, however, not
specific to these image events, it seems to apply to all events.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Edit mode must be cleared for manually added dives as well when one hits
cancel or save.
Fixes#437
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The only thing that was missing was the size of the vertical axis. I'm
setting a small line on the bottom of the temperature axis, since both
have blue color, this will not make people think one is the other.
TODO: change the color to red.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was done during an IRC hacking session with Tomaz.
It compiles, it shows something but not the right graph.
Committed here so Tomaz and I can continue to work on it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In Qt5, Qt doesn't define TRUE/FALSE anymore, so we need to stick to
stdbools to have Qt5 builds working.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Right now the search button isn't connected for any device (clearly an
oversight). At least for the Uemis I think I have a sane implementation of
what that should do.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some digital cameras do not set the DateTime exif field bat use
DateTimeOriginal. If the first option is not found, use the second one
to try to detect the moment when the image was shot.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I get compile errors from these lines. Removing the class name from the
calls allow me to compile the current master.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code of the context menu and the gas change event callback is mostly
the same as the old profile, with minimum modifications, as this changes
the order of the code on the callback to make it a bit saner (declare
variables first, call code later).
This also fixes a bug on the model that was not cleaning itself in the
correct way after a call to clear.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is just an attempt to not have the time markers and dive computer
name printed right on top of each other.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fiz zvalue of the partialPressure Gas Graph over the TimeAxis, and also
corrects the position of the PartialPressure gas graph. It now no longer
appears to 'float' over the TimeAxis, now it's on the very top of it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch creates better defaults for the grid lines, size, position and
z-level.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Create the grids, and the way that they move is fabulous <3
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Change the axis update method to move the lines alongside the texts.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This function is for non-duplication of code for different QLists, since I
now have Texts and Lines, I needed to make the code in a way that it
worked without dupplication.
It's a pretty standard use of templates, I think that even the C guys will
not be offended by it. :)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This class was pratically a re-do of the axis, I'll do the axis to plot
the lines when it feels like it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The events were static on the canvas even if the profile changed its size
because of a toggle of the partial pressure gas. This patch makes events
move on the canvas to their correct place.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The first depth label of its axis is always zero, do not show it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
That particular dive didn't have a temperature, and thus we got a crash
while accessing the last temperature text.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way the partial pressure graph can have smaller pressure labels than
all the other labels on the profile.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previously all text in the new profile was deawn in the same font. With
this change the labels on all axes are smaller.
It might be even better to allow per-axis configuration of the label size
as along the time axis the bigger size looked better. But especially for
partial pressures this looks much better.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user never clicks on the log and dump checkboxes (and that's what
we expect to be the case by default), then the log / dump flags (and
filenames) were never initialized.
I am reasonably certain this will close the following three bugs, that all
show the same symptom: they behave as if libdivecomputer dump was set,
even if it wasn't.
Fixes: #426Fixes: #431Fixes: #435
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The last temperature text used to have the same align flags
as all the other texts: Right. this makes it much more appealing.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code shamelessy copied from the old profile introduced
a bug where the old temperature was not correctly shown.
I'v added a new member to the class that will store the
last valid temperature, and use that to calculate if there's
a reason or not to display it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Just removed the unused tanks from the toolbar,
since it's just a removal of something on the ui
related code, it's good to see how much verbose
the xml to generate the UI is.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
First attempt to use the tools on one of our source files.
So far so good. Not perfect, but a HUGE improvement.
Most importantly it effortlessly fixed the Allman style braces introduced
in commit 51220f26ef ("Add recent files to main menu.").
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add(up to four) recent files to File main menu.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
C++ style of accessing single instance class object.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we move, shrink or expand the depth axis, the
meandepth should also change it's position. this
patch adds that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The extra axis labels on the Temperature and Cylinder Pressure
graphs are not wanted in release mode as they create a lot of visual
clutter, but they are useful to have in debug mode since we can then
better understand what went wrong.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Same as the last commit, but for cylinder pressure. Another bug
was spotted, where the mean depth line does not move to the correct
location after a axis-size-changed - fixing that on next commit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds shrinking of the Temperature axis when partial
pressures are shown. This adds an unwanted side effect however,
the axis started showing it's values - and we didn't do that on
the gtk version or on the old profile. While this is good for
debugging, it's not wanted for the software if it's on release
mode. I'll fix that in due time.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When the user checked the option to show or hide the partial
presure graph the size of the profile graph was kept the same;
usually I do those changes on the objects themselves, on the
settingsChanged method, but since the calculation of the
size of the profile was done on the ProfileView class for
consistency with the other objects, I had to change it there
too.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The coding style for switch isn't the prettiest, but let's at least keep
things consistent.
Also, those ugly break statements never got reached, anyway.
And there was no need to re-declare and re-generate currentString.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Don't have nested loops with the same loop variable. Really. Even if it is
legal C++.
And don't declare local variables more than once. This will only cause
issues later.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If you need to use this->error to distinguish the local variable from the
object membe that should be a hint that maybe you didn't pick the best
name for the local variable.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the variable was inside of an inner scope this was technically legal,
but it's just too annoying for words.
(The diff in the commit doesn't make this obvious, but outside the for
loop in the same function there is a divedatapoint *dp, so we had a
pointer to divedatapoint and a divedatapoint with the same name...)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I could have gone either way - the other alternative would have been to
remove the argument to the function. But since current_dive is a macro
and since the semantic of the function make sense with the argument being
passed in, it seemed better to just not use current_dive in the function.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
SAC should be calculated in relationship to surface pressure, not "1 bar".
I also realize that we have a few other cases where we do the same
mistake: the partial pressure calculations do things like
po2 = o2 / 1000.0 * depth_to_mbar(sample->depth.mm, dive);
which is wrong as well - the partial pressure is also relative to
standard atmospheric pressures.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* ensure include guard to every header
* comment endif guard block
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If I click in the Preferences Dialog on the 3 dots to choose a default
file to load and cancel the opening FileDialog an empty string is returned
and set to the coresponding QLineEdit.
The new behavior (and mostly expected) is to update the QLineEdit only
if there is a filename returned from QFileDialog.
Signed-off-by: Patrick Majewski <dive@patrick-majewski.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Yes, the old code made perfect sense when you read it - except the C++
compiler turned it into something quite different from what was intended.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
They should have a newline at the end.
Forward declarations of classes should be 'class'.
Function / method definitions don't end on a ';'
Remove obsolete QStateMachine forward reference.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
plotDives takes a list of dives (for future use) but currently only looks
at the first dive in this list. With that semantic in mind we can save
ourselves some work if we first check if this is the same dive we are
already showing.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* This should never be called with a NULL dive.
* The dc variable was set then never used.
* We now have a unique id for each dive, but we can't simply not
repopulate the model in setDive as the old comment might make you
consider, as otherwise the dataModel will reference already freed data
in pInfo.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We carefully extracted the first dive passed in with the QList, but then
always used current_dive. That's silly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Those items have parent(), which means that when the parent has a scene,
they are automatically added and removed from the scene.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Background was not correctly back to it's original position
and a few other items kept their visibility when it shouldn't.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch does a few things:
1 - reset the model when user closes the dive file
2 - connects the 'rowsAboutToBeRemoved' in a way that the graphics can
remove their polygons too
3 - adds a 'clear' virtual method so items that don't follow the rules can
clean themseves up.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If readfile fails it already frees its buffer.
If the parsing failed we shouldn't use the data in the structure.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Allow subsurface to show the dive planner in case a compile flag is given.
qmake CONFIG+=planner
Signed-off-by: Danilo Cesar Lemes de Paula <danilo.eu@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
But in general we should not show the profile of a dive that
was recently removed from the list - e.g. via File->Close.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The profile info was generated using nasty string concatenation that the
membuffers are much better at anyway. And membuffers don't need those
arbitrarily sized fixed buffers (500 bytes? Why 500 bytes?).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* Add missing variable members to the initializer lists.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* Add missing variable members to the initializer lists.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* Add missing variable members to the initializer lists.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* Move variable members construction to the initializer lists.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* Initialize every ToolTipItem variable member in initialize list.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* Add colorIndex to initialize list.
* Reorder initialize to correct order.
Note: colorIndex initialize value is set too SAC_DEFAULT. I do not know
what is the rigth value since this variable member is not used anywhere.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* Initialize/construct all variable members in constructor list.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* Add missing improvements::diveId variable member to the initialize list.
* Cleanup DivePlotDataModel::pInfo structure instead only one member.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* Initialize variable members in DiveCartesianAxis class.
Note: Initialized values I put needs to be doublechecked.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* Initialize DivelogsDeWebServices::uploadMode in initialize list, instead
of constructor body expression.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* Change 'searchBox' member type from 'QLineEdit *' to 'QLineEdit'
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
All of these are now set from the toolbar next to the new profile. This
removes functionality for people using the old profile, but as we will rip
that out and switch to the new profile, soon, that seems an acceptable
side effect.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Load all the settings in the PreferenceDialog constructor. Previously
all the settings were overwritten with default values the first time
PreferencesDialog::syncSettings() was called.
Signed-off-by: Michael Andreen <harv@ruin.nu>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Main change is that now SubsurfaceAbout doesn't have instance object, but
it constructs and destructs dynamically.
* Remove the static SubsurfaceAbout::instance() class member
* construct/destruct about dialog on demand
* Other small aboutbox cleanups.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
ACK-ed-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Ancient code that was unused and only adding complexity to the
DiveCartesianAxis.
Also remove the spacing between the text and the lines of the Axis.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch re-enables a few items on the profile, most notably, the
profile itself.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Comment out most of the items on the profile since they are
currently completely broken ( positioning, etc ).
Also, remove the settingsChanged stuff from the DepthAxis because it
doesn't have the shrinked / expanded size on it ( it sits on the profile
code ) so I'll most probably move that to the profile settingsChanged in
the future - or if anyone knows of a better place to have this, I'm all
ears.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The setup of the item positions for the profile state should be done here.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Show a nice poster that Luisa did for Subsurface ( we have a few other
options that I'm waiting her to send. )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Change the 'namespace ItemPos' declared on the commit before this one to a
struct that will have all the 'on canvas' and 'off canvas' positions and
representations of all items, so we know where to change.
Also remove the remaining stuff from planer that was going to exist on
this profile.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This addItem was being called twice, and a warning that the item was
already in the scene was annoying me.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit breaks the whole new profile. <3
The problem with the old code is that I was using the QStateMachine
and I just got tired of it. I will implement a much-simpler state
machine to do what I want instead of hitting my head on the wall
to understand how that was supposed to work.
This commit also adds a few helper methods to simplify the understanding
of the constructor and tries to make the logic a bit better. No graphics
are being show right now. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch starts the cleanup that will take a few iterations to finish.
The current profile code uses QStateMachine, and it's much too verbose
for something we can do with less than a third of its lines of code.
I also added on the beginning of the redesign of the profile code for
planner, edit and a few other things that are going to be ported to
the new profile in the future, but not currently - I just lack the time
to make that work for the next release.
This commit basically:
- moves all 'new' calls to the initializer-list
- create a new 'setupItem' private method to concentrate the calls
that any item will do
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is needed because of a braindead issue on the Qt event
loop:
http://stackoverflow.com/questions/10059721/qt-qstatemachine-sync-problems-initial-state-not-set-on-started-signali
For the "event 1" to be received, the machine must already be
in a state that react to that signal. Even it was a queued
connection, the slot would be queued but only after the signal
was received, which it isn't since there is no connection
yet at that point.
To solve your problem, you can wait for the machine is in
"state A" before emitting the signal:
machine->start();
qApp->processEvents();
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will probably be added back in the future, but for now
they have no use and it was making me nauseaus.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Populate the status of the profile tool box as soon as the program
starts.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we have now a mix of old / new prefs, remember
to change both when we alter something.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I had a few very strange bugs regarding to preferences (like clicking on
apply twice so things worked), because the code that moved from
"QSettings" to 'Internal Settings Struct' was being triggered on the
mainwindow, *after* the settingsChanged signal was emmited. This should
fix the problem.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds an entry to the dive list context menu to load images. The user
can select image files and set a time offset to align camera and dive
computer clocks.
Using the exif time stamp the images are tried to match to the times of
the selected dives (with a grace period of an hour before and after the
dive). Upon success an event of type 123 is created per image with the
string value being the path to the image. Those images are displayed as
thumbnails in the profile. If the matching dive does not yet have a geo
location specified but the image provides one it is copied to the dive
(making the camera a poor man's companion app).
This patch includes easyexif https://code.google.com/p/easyexif/ which is
originally under a New BSD License to parse the image meta data.
This commit includes a new test dive dives/test31.xml with a matching
image wreck.jpg to try out the functionallity.
Obvious to do's:
Have images on the map
Have the images clickable
Have a proper picture viewer
Give visual reference for image time shifting.
Use the new profile
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For quick acess of preferences the show / hide stuff from the Settings
dialog is now in that toolbox and in the future we can put a few more,
like 'Show Notifications Panel' and 'Enable Legend'
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds an event filter to hide normal tooltips on the new
profile. All tooltips should be displayed in the Notification Area.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes use of a cache variable instead of creating / accessing a
new one via operator[], because for some reason QGraphicsPolygonItem
doesn't return a reference for polygon and a copy is always made.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With this patch the tooltip is ready to work on the new profile, we just
need to actually use it.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The functionality is not there yet - just the item hovering
the screen.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is needed so we can share the dive tooltip item with the
new and old profile at the same time. Next few commits will be
setting the functionality of the tooltip item on the new one.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Set showWithPPGraph so that animateChangeLine() is always called the
first time settingsChanged() is called.
Signed-off-by: Michael Andreen <harv@ruin.nu>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This works in a different way compared to the old widget.
To make it work we use vieport()'s height() and width()
and simplify the scroll position to:
scrollPosition = (mousePosition / totalLength) * scrollMaximum
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch uses the same code that lubomir used on the
old profile. It strangely didn't worked - most probably
because the scene has a fixed width() and height() of
100. the zoom works, and the movement works, but only
on the 100 first pixels of the profile.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch optimizes a few items when hitting the
'save preferences' dialog, since when a preference is
modified, all the items try to reload their visual
based on wether a preference changed or not, the correct
code for 'hey, my pref changed, let's update' needed
to be done.
now the axis will only set a new maximum if it's different
from the old one ( and thus, going to a new dive with
the same maxdepth or maxtime as the old one will not touch
their axis, not triggering gratuitous animations. )
also, the 'incr by 3m' was not being called - it seems
that our 'syncsettings' method is not storing things on
the 'prefs' global var. I added just for the incr by 3m
case, but it's something that we need to check later.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Created a method to check if calculations should take place
taking into consideration what changed on the model. if the
model changes *everything*, them, all calculations should
be done, but if just some of the columns of the model are
changed, only those columns should trigger an visual update
on the items.
In theory this patch looks right, but something is wrong (
calculations are not being made. ), so I'll commit this any
how, and fix on the next commit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The gradient factor is shown with this patch, but the correct position
should still be adjusted.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch only adds preference-awareness for the ceiling.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The last commit made the time and all other axis behave like the time
axis. Not cool.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit adds the same behavior for the old time markers on the new
ones.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Do not create a text label if the returned string is empty.
Also, fixed a potential crash after not creating a label and adding it to
the list of created labels.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes the color of the cylinder pressure use the sac colors.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit is rather big, and I forgot to cut it in pieces.
The first part creates a new 'calculate_gas_information' that will not
fill the profile_info->maxpp member ( that should be removed from it as
soon as the new dialog is finished ). The reason for that is that all of
the profile data will be calculated and the graph needs to update
dynamically, so whenever the settings changes, I ask for the model which
is the biggest graph and replot only the ones we need.
The second part adds a new animation function 'animdelete' to fade-out and
delete the item when it's done. the old function 'hide' did just that but
a hide shouldn't delete anything.
The third part is preferenes awareness for the PP graphs. I created two
new functions that receive the settings key for visibility and use the
QSettings to show / hide them. This also works quite well for the axis;
if no graph is visible, the axis will also hide itself.
The fourth part is colors. The pp graphs now have the correct colors.
And a bit of code cleanup too.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Strangely enough, on the system I build this, I don't see the crash. But
when I create a DMG and run it on a different Mac, it crashes if
updateTicks() is called but scene() still returns 0.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code sets up the C++ part for importing manually kept CSV log.
That includes setting up the field separator selection and calling
C-code for parsing the log file.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Important to note that no Partial Pressure Graph handles
settings yet.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Using the PartialPressureGasItem the addition of a new partial plot
is very easy.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes the beginning of the partial gas pressures, there's
two more. but this code uses a good part of the Model View system,
and it's way clearer than the old one. Luckly the other 2
missing items will be even more clear ( the diffs ) to do,
because I just need to create a new PartialPressureGasItem and
set the properties. <3
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch prevents memory leak by adding the text on the list of
'delete me when model changes' items. it also makes things a bit more
snappy because the scene doesn't have to deal with all of the
texts bounding rectangles eveytime.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
the profile item should also use the model to know when to
change something, this makes it happen.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch moves the temperature item as a cache that will
be updated as the model updates, instead of deleting / recreating
it everytime the dive changes.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The last patch correctly moved the GasPressure item to use
a cache-based system, but ignored the fact that the Gas
pressure text was not being removed from the scene. this fixed
it.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes the Gas Pressure Item a 'cached' item, when the dive
changes, the item will regenerate the drawing based on it's model.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes the Tissues be used as a 'cache', it will not
be deleted untill the program closes, but whenever a new dive is
selected, the old drawings of the tissues will be regenerated,
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a new class DiveCalculatedTissue that's preferences aware.
It knows when to show or hide itself.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way we will always have this object on screen, and as soon as the
model changes, it's contents will change.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The reported ceiling now behaves better by not being deleted / recreated,
instead it uses the same object and connects to the model to know when to
regenerate its plot.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes the cartesian axis of the profile depth shrink and
(together with it) the Profile Depth and the grid lines. There will
probabla bey a lot of things that didn't have their correct position
fixed, so I'll fix them in the later commits.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Almost all of the items on the new profile were being painted
on the same ZLevel, so the level of awesomeness was a bit random.
This puts things on the correct spots, events on top of everything,
profile at the bottom, things in the middle.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Dirk's implementation of the MeanDepth item was correct, but in order to
add the 2 strings to it ( one at the begin, one at the end ) I had to put
more stuff inside the ProfileWidget that's already packed with graphics
items.
So I created a new class MeanDepthItem that contains these 2 strings and
will get updated whenever the value changes.
I also fixed a math inconsistency where I changed RIGHT to LEFT.
(wich fixed a few text-placements, and broke others.)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When the preferences changed signal is fired, the items that can change
their visual based on the preferences now have to reimplement the
preferencesChanged method, so they know if they need to be replotted on
screen. I already implemented that for two of the items ( ProfileDepth and
Ceiling ) but others might need that too.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code actually uses the preferences for something. It will show and
hide the calculated ceiling in red if the prefrerences are changed for
that. One bad thing that I did in this commit ( so it was easy to try ) is
that a preference change will redraw the whole graph - not optimized. I'll
make this better in a later commit so that only the affected items will be
redrawn.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is an attempt to speed up painting a bit. Since we will draw the red
ceiling on top of the profile, I don't see a reason to dig a hole in it,
creating an more complex shape to be passed to the painter. Easier shapes
are easier to draw. ( I think )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds dive computer calculated ceiling on the profile graph as a
'hole' on it. There's an item that paints it in red - maybe we shouldn't
offer an option here and show that only in red?
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Test for max_temp == min_temp to prevent math overflow when calculating
temperature axis in new profile
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This item plots the DiveCalculatedCeiling over the profile. I still need
to add the Calc All Tissues version.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This just adds the texts for the gas profile. I've also added a method on
the dataModel() to return the diveId of the last used dive in a way that
the other methods can use it.
This code is almost 1-to-1 with the old one, a bit of thinkering can be
used to merge this loop with the upper one.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of asking the data as we do on the generic models, use the
internal knowledge of the class.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the dive computer text on the bottom left side of the new Profile.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Changes the ZValue of the event items so they are plotted
on top of the profile, instead of being hidden on some.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch just cleans a bit the Cartesian Axis, we never used
ticks on it, just the grid lines ( that I need to animate a bit. )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fixes temperature text replacing the old code
with the new DiveTextItem.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This uses a combination of items on the canvas which makes it easier to
position it where I want.
This also broke the other texts because I forgot about them. I will
fix that on the next commit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Removed the plotText function and replaced it with the
DiveTextItem class - this way there's just one way to add
text on screen, and it also makes it easy to fix positioning
of stuff there. Which is what I'll try to fix on the next commit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Split divemaster field value using comma and populate completion list.
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we use tags widget for several input fields (tags, buddy,
divemaster), it makes sense to keep focus policy setting in one place.
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This prevents tags widgets (dive tags and buddy) from grabbing
focus on mouse wheel events but allows entering dive edit mode
on mouse click.
It was attempted earlier by Dirk (commit d117beca), but edit mode
did not work properly.
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With massive hand-holding by Tomaz.
Writing for the new profile code is slightly different. You don't draw
anything, you just tell the widget where things are supposed to end up and
how they are supposed to look. Really nice.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The gasPressureItem needs to be initialized to null in the constructor.
Signed-off-by: Michael Andreen <harv@ruin.nu>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I Moved the 'plot text' method of the Old Graphics to the new
layout - this one was mostly unchanged as it was already good
as is.
And used the TemperatureProfileItem to also display texts.
This was the first implementation of the new system that uses
*less* code than the original one, wich makes me happy.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the Gas Pressure Graph with the related Model Changes
to access the cylinder index, pressure, interpolated pressure
and SAC.
The plot does not correctly plot its color right now but it's not hard to
do.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This version of the create plot info is the same as before, with the
difference that it doesn't depends on the gc.
Also fixed a crash.
The Pressure Index, Information and interpolated seems wrong,
I'm getting only zeroes.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added missing information about the pressure to the model; this shows that
I didn't do something right, as the model has 0 pressure information. Need
to fix that on the next commit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The cylinder pressure axis is the 'Y' axis for the Cylinder plot.
I positioned it in around 20% to 60% of the screen state.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since I didn't add a pixmap to be the background of the new profile, yet,
things got wrong on mac and crashed. This should fix it.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes a warning about the QGraphicsItems not being on the
QGraphicsScene, and thus, cannot be removed from it.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old graph didn't display the time axis, so this will
also not display it. By not calling updateTicks the labels
and ticks of the Axis are not created.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now we can create an axis that's topToBottom, BottomToTop, LeftToRight and
RightToLeft.
This was needed for the Temperature Plot, because it should be inverted
(starting on the bottom).
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the Temperature Graph with its related classes. A Temperature Axis
is also created so the item is plotted on the right place.
Currently the Temperature Axis is just like the depth axis - top is
zero, wich means that the graph is inverted.
Also, the Temperature axis is being displayed as this helps debugging.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The DiveProfileItem contained much of the complexity and
algorithms for almost all line-based items on the canvas,
so I transformed that to a general abstraction and implemented
a new DiveProfileItem that uses it. this should reduce a
bit of code since the implementation of the PP Graphs, Temperature
Cylinder Pressure and maybe a few others will only need to
reimplement the paint() and the modelDataChanged() methods.
The rest is ready.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Simply pass a event to the item and it will know what
to do. The sad part is that this isn't true yet - there's
quite a bit of boilerplate that a lot of the items are needing,
but the good part is that the boolerplate is the same in
all of the items, which means that I can create a tiny bit
of abstraction to encapsulate it and the code will be
way smaller to setup the items on the canvas.
Right now the items are being correctly placed on the
right places. It doesn't supports hidding / showing yet.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code for this item is a bit too big to be just the grid
of the dives and I know that, don't bully me. :)
The main idea of this grid is that it knows when it should be
updated. this is a bit different than the old code where all
the painting happened on the same method. This is bad because
it's more code, but it's better because if I break the grid,
only the grid will be broken, and it's easyer to spot the breakage.
in the old code if I did the wrong thing with the graphics context,
the whole graph gots messed out.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There was a bug in the old implementation where we needed to
trigger a repaint of the profile almost everywhere. this isn't
needed anymore on the new one, so do not use the same method
that will be killed when I finish this.e
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This method gathers information about the max and minimum sizes of
the cartesian axis that we should plot. It's still a bit cumberstone
for my taste, but this shouldn't be a problem. I think we need to
rework the 'Zoomed' version of it, since zoom or without zoom,
we should be good to go using the QGraphicsView.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As Sensus import needs a specific XSLT and user specified parameters are
not used nor needed, tune the GUI accordingly (disable options and add
Sensus in the list of known imports).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is just to make it more obvious when new issues get introduced. The
build should always be free of warnings...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Another futile attempt to cleanup the code and make coding style and
whitespace consistent. I tried to add a file that describes the key points
of our coding style. I have no illusions that this will help the least
bit...
This commit should ONLY change whitespace
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Tomaz code had us start on the depth model tab (when built in debug mode).
It seems to make much more sense to still show the fully featured profile
by default.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Created a new version of calculate_max_limits that doesn't have a
graphics_context and returns a plot_info. The code is basically the same
as the old calculate_max_limits, so there's not much to talk about.
The rest of the code is just boilerplate to plug the Profile
code with the axis and model stuff, to be plotted on screen.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit adds a QTableView if built in debug mode. This is very userful
to understand the Profile that will be drawn by the graphics classes and
fix the possible errors.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The state machine needs to be started before it works; now the animations
are working. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There's a Qt visual debug / helper tool made by KDAB named GammaRay that
uses QObject instrospection to understand what's happening on a QProject.
This tool uses the Object Name to display the items on a list, so I've
added the QState's names to their objects, which greatly helps debugging
with Gamma Ray the states of the StateMachine.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The context menu added here should only be temporary, it's an easy and
simple way to test the transitions of the items on screen.
They seem a bit broken atm, I'll try to fix that. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code creates the animations that will be triggered when an state
changes. Things like hiding items and such should be handled this way.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Just removed some code that I tougth to use, but it looks
like it's just a waste of lines.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It seems that I forgot to add the background pixmap, but this is being
done right now by luisa. This patch fixes the size of the scene by
scaling everything to the size of the viewport as soon as a resize is
done, and it also fixes the size of the - to be included - background
pixmap.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code adds all state transitions for the items on screen; they do not
animate yet, but already move to the correct location (the location seems
wrong on the screen, because I'v not correctly zoomed out the canvas yet).
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Those constants will be used later on to setup all transitions of
the Graphics Items on the canvas. They are the correct positions
of each item inside and outside of the scene, in a way that the
state machine can animate them smootly.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a start of the work on the States for the Profile. All setup is
done, all connections are done. Maybe there's something missing because I
never worked with QStateMachine before, but it seems to work correctly.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The background should be a Pixmap and thus it cannot zoom in or
out; this keeps it the same size always, the full height of the
scene.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Setup the default item sizes and locations inside of the QGraphicsScene.
Also added every item to the scene so that it's correctly displayed on
screen.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Beginning of the code for the constructor, just constructing
some of the items and preparing for the State Machine to come.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Created a Time Axis based on the CartesianAxis that knows
how to plot the minutes. This is needed because the CartesianAxis
donesn't knows about minutes at all, and would plot the
seconds instead.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The CartesianAxis used a simple method to put things on screen
which is wrong for almost any case besides the 'current value here'
since we store things in milimeters on the axis, we need to convert those
to meters before showing on the profile.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This call just passes the selected dive to the new profile widget. No
drawing is performed, I still have to setup the constructors and the rest
of the initialization of the new Profile.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I've used the paint() method on it ( even if it's not necessary
on a QGraphicsView ) to reduce absurdely the number of items that are
inserted on the QGraphicsScene ( each small line of the profile should
be an item if it was not for this, it's like that on the old profile. )
and thus reducing the memory consumption, speed and so on.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This model encapsulates the plot_info struct and provides
a consistent way to show it using the Qt Model view system
in the C++ and QML way. For a QGraphicsItem that should show
a Profile, this is the start.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we prepare the axis to show something on the Profile
we need to add the remaining ticks to show on screen,
Since this method tries to animately move / remove things
before calling this.
This has no animations yet - will have in the future.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the size of the Axis changed, this should move them smootly to their
place.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes the updateTicks method not remove / readd everything
when it's triggered, but to only remove the ticks / labels that
are no longer needed on the current display.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the same class as the Ruler, but uses the DiveLineItem
and DiveTextItem classes created to make it animateable. The next
few commits will work on that part. The Ruler was a very bad
name for a class that's actually an Axis, that's why I depreceated
the later.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the animation methods are fairly the same for any QGraphicsItem,
I created a new namespace named 'Animations' that should handle all
of the specific Animation Functions there, and the programmer has to
call those functions from the objects. Good thing is that this reduces
boilerplate code.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit adds a class based on QGraphicsSimpleTextItem that
handls animations via animatedHide() animatedMoveTo() and a few
other QPropertyes. This is to be used in conjunction with the
DiveLineItem added in the past commit on the Coordinate Axis.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This class has animatedHide, animatedMoveTo and QProperty
animations. it's very userful for the future creation of the
Cartesian Axis that will have the ticks 'flowing' around when
it's needed.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This class is useful for adding / removing icons on the future profile in
a way that they are smoothly added to / removed from the canvas.
It uses the QProperty System to deal with animations.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This class extends the QGraphicsRectItem with the ability
to use the Qt Property System - and thus, we can animate
the properties. Initially I put only the rectangle, the
position and the x and y positions indidually for testing.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The idea of this widget is to display and edit the profile.
It has:
1 - ToolTip / Legend item, displays every information of the current
mouse position on it, plus the legend for the maps.
2 - ToolBox, displays the QActions that are used to do special stuff
on the profile ( like activating the plugins. )
3 - Cartesian Axis for depth ( y )
4 - Cartesian Axis for Gases ( y )
5 - Cartesian Axis for Time ( x )
It needs to be dynamic, things should *flow* on it, not just appear / disappear.
It's the last attempt to create a QGraphicsView based Profile System,
as the next will most probably be written in QML.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Seems it's related to bug #390. Not sure whether this fix is correct.
See #390
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This doesn't change storage format. Instead it parses buddy strings and
converts them to string list which is supplied to tags widget.
This feature was requested in ticket #311
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While preparing to extend tags model to 'Buddy' field we populate
completion list by splittng those fields by comma.
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There are at least two scenarios where our old code was flat out wrong.
If you manually add a cylinder (because you may want to switch to it in
the profile), then at least until the next time you restart Subsurface
this cylinder should be shown.
Also, when you switch to a cylinder by adding a gas switch event on the
profile, that change should then make that cylinder visible.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code had parts that where Qt5-compatible, this introduces the last
bits that it needs to be completely compatible.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Recreate the labels in the marble window (this adds all the new locations
with the correct labels), center on the selected dive (this makes sense in
case this is one of the dives that got location information) and redisplay
the main tab (again, as this might now have location information).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- make the User ID input field wide enough
- use the progress bar for an explanatory text
- mark it as 100% completed once the download succeeds
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch enables main window full screen mode by menu toggle or pressing
F11.
[Dirk Hohndel: whitespace cleanup]
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Pre-configured imports in Import Dive Log File for CSV files should also
be cleared when the field separator is changed by the user.
Promoted DiveLogImportDialog::unknownImports to slot as per Canabrava's
suggestion and Hohndel's request.
Signed-off-by: Rodrigo Severo <rodrigo@fabricadeideias.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Pre-configured imports in Import Dive Log File for CSV files should also
set the pre-defined field separator.
[Dirk Hohndel: cleaned up hideous whitespace]
Signed-off-by:Rodrigo Severo <rodrigo@fabricadeideias.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some dive computers will always download all tanks that they store, not
just the ones used in a dive. Most people only want to see the tanks that
they actually used during the dive (and for the others there's an option
to go back to the old behavior, just in case).
All this is only in memory / during runtime. If the dive computer provided
the extra data we will not throw it away.
Fixes#373
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make search panel floating so that web view does not resize.
This commit also addresses following issues:
- search now wraps around document
- application icon and window title are now back
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The shortcut may be used elsewhere, e.g. in user manual
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We now never remove units or percentage signs, and always just compare
the string data, so we should remove the hacky arguments that are no
longer used.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This matches the pattern of unit conversion, and will allow us to remove
all the code that uses the old complex "CHANGED()" macro that tries to
remove units or percent signs.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Whittling down on the string parsing that doesn't check user-specified
units. Still need to handle temperatures (and will do percentages to
match the pattern too), but this is getting us closer to always honoring
user-specified units.
With this you can say that you have a "10l" cylinder at "3000psi", and
it will do the right thing (it's basically a 72 cuft cylinder in
imperial measurements).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This just adds (and uses) a string_to_pressure() to parse pressure units
correctly when filling in cylinder pressures.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's currently only used for the setting of the cylinder switching
depth, but now that one should work with user-specified units (so you
can set a max depth in feet even if you use metric, and vice versa).
In the future, if we also make the unit preferences something you can
pass in (with user preferences as a default argument value), we might
want to use this for parsing the XML too, so that we'd honor explicit
units in the XML strings. But the XML input unit preferences are not
necessarily at all the same as the user preferences, so that does
require us to extend the conversion functions to do possibly explicit
unit preference selection.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The C library doesn't use const char pointers for legacy reasons (and
because you *can* modify the string the end pointer points to), but
let's do it in our internal implementation just because it's a nice
guarantee to have.
We actually used to have a non-const end pointer and replace a decimal
comma with a decimal dot, but that was because we didn't have the fancy
"allow commas" flags. So by using our own strtod_flags() function, we
can now keep all the strings we parse read-only rather than modify them
as we parse them.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make it use 'weight_t' and hide the "grams" part inside the type. That
was the whole point of the weight_t type, after all. Returning a
"double" was always bogus, since we internally always do integer grams
(and the function actually used "rint()" to get all the rounding right
anyway).
As a result, it's now called "string_to_weight()".
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We do not need any import dialog when importing normal XML based
divelogs. With this they are imported directly after file selection
dialog. However, when CSV files are detected in the import list, the
configuration dialog is displayed and applied for them. (CSV files are
detected by file extension.)
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the 'logfile_name' and 'dumpfile_name' were NULL we can simply
strdup() them with a new value, but if there was a previous value
we need to free() first.
C99 6.7.8 allows us to keep said variables without the
explicit NULL initialiazation.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit c3fe1a9e9f ("Get rid of pointers to dive structures in the
UI") I was a bit too aggressive moving away from pointers to dives.
This is only needed for pointers that are held across operations that
could change the dive_table. I figured that it wouldn't hurt to get rid of
some more pointers as well, but it turns out I was wrong. The current dive
that we store in the Cylinder and Weight models can be a dive that isn't
in the dive_table at all: the multiEditEquipmentPlaceholder. And when
using the diveId we end up finding the original dive in the dive_table and
therefore modify the wrong structure.
This undoes two thirds of the above mentioned commit.
Reported-and-analyzed-by: Patrick Valsecchi <patrick@thus.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Turns out this function can be called when there is no valid dive - so
only protect those parts that dereference the dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The assumption that the pointer will keep pointing to a valid structure is
fundamentally flawed. And even if that is true today, it might change in
the future - just don't do it. Use the diveId instead.
The exception is when you own the structure and use it within one UI
interaction during which any way to change the dive_table is disabled
(e.g., while adding / editing a dive).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Restoring the selection was not setting the selected dive as current, and
thus, breaking keyboard navigation.
Fixes#402
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Just one of the completers had Qt::CaseInsentitive set,
setting for all of them.
Fixes#400
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit 528d0ea0e7 ("Print numerical value of mean depth") Miika once
again forgot the three non-metric countries on this planet... :-)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will print the numerical value of mean depth to the profile graph.
Fixes#405
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We have the wonderful Qt string functions. Let's use them to make the code
simpler and easier to read.
Suggested-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When a dive contains no cylinders, clicking the '+'
button could SIGSEGV if current_dive->dc.model is NULL.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Changing the import stuff to DiveLogImport. Now we should have one
import function/dialog for importing divelogs instead of multiple menu
entries.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch merges import dialog with CSV import dialog. The aim is to
have only one import menu entry for log files. This menu entry pops up
an import dialog that has tabs for different types of imports (supported
dive logs and CSV configuration currently).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
changes the location coordinates display in the main tab
to use ISO6709(2008) Annex D suggested format.
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The imperial cylinder sizes are not just in cubic feet: they are in
cubic feet of gas at STP. So the imperial/metric difference is not
just about converting blindly from liters to cubic feet, you also have
to take the working pressure of the cylinder into account.
This was broken by commit f9b7c5dfe9 ("Make units in cells
consistant in CylindersModel"), because those poor sheltered Swedish
people have never had to work with the wondrous imperial cylinder
sizing, and think that units should make _sense_. Hah.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of always assuming that all numbers are in the users locale
weight units, allow the user to say "kg" or "lbs" explicitly.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Note that this is IMHO the wrong fix. Because we shouldn't just ignore the
units, we should do correct conversions.
Before this patch, if the user is in metric mode and then types in 4.5kg
or 10lbs for a weight, Subsurface ignores the entry and throws it away.
Very much not the expected behavior.
With this patch Subsurface will take the value, but ignore the unit and
assume that the user meant kg (since it's in metric mode). Still not
really the expected behavior for 10lbs (which is now 10kg), but if the
user typed 4.5kg (which admittedly is much more likely), then with this
change Subsurface will do the right thing.
Fixes#395
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For the common user, a field number is more intuitive than field index.
So let's use that in numbering CSV import fields.
Fixes#388
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On Ubuntu, new events have time zero. This is fixed by resetting
gc.rightx to maxtime at the end of plot function.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Bookmark with compass heading is named 'heading' and should use the
bookmark icon.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And prevent the user from editing equipment in trip edit mode (those edits
are both meaningless and of course will be ignored once we save the
changes to the trip).
Also moved some code for setting up tanks, weights, tags, etc, into the
"this is not a trip-edit" part of the updateDiveInfo() function.
Fixes#392
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Regardless of whether the user clicks in the info tab, makes a change to
equipment or starts by editing the profile (i.e., clicking on the little
penguin), we should get into the same state and behave the same way.
This means that when editing a manually added dive we are always in
editMode == MANUALLY_ADDED_DIVE - and editMode == DIVE means we are
editing a dive that came from another source.
Fixes#379
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch disables/enables the DC device node based on what type of
transport the selected DC uses. The only time the device node field is
used is if the selected DC uses a serial transport type. IrDA and USB type
transports do not use the device node.
Signed-off-by: Benjamin Fogel <nystire@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use QStringList::contains instead of iterating the list.
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
MANUALLY_ADDED_DIVE is a different flavor of ADD mode (in both cases we
are in "planner mode"), so bail out for that as well.
See #379
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QList is optimized for storing pointer-sized items, thus
a QVector is the better choice for everything else.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Thise files dates back from the beginning of the Qt port and
were never used anyway...
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
deleting a null pointer is valid, so we just delete it
instead of checking if it exists.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Code cleanup, don't use if ( thing() ) set false,
but set !thing() instead.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes my last annoyances with dark themes
on subsurface. It changes the background color of the
edited info tab to a darker yellow if the theme is
dark, and a light yellow if the theme is light.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old code used a QString instead of a const QString&, wich
mean that each foreach step the string was copied.
added a break on the if-found-true to stop the foreach, since
we already found it.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows user to view any file on CSV import dialog, not only the
ones ending with .csv. Of course, the default still shows only the .csv
files and user needs to change the filter to view the rest.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds support for two more GPS coordinate formats and also fixes a
couple of issues with the previous implementation.
We used to only support full degrees and decimal minutes. We now also
support fully decimal and degrees, minutes and decimal seconds.
The previous implementation would color the input field red if either it
couldn't parse the string, or if it was able to parse it but it was the
same as the previous location. That's misleading.
The previous implementation also changed all gps coordinates to the new
coordinates in a multi-dive edit - instead of just changing the ones that
are the same as the master dive.
Fixes#387
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Why calculate the number of entries in the zip downloaded from Divelogs.De
if you don't do anything with that number?
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
None of these are actual bugs. But none of the fixes are harmful, either.
And much as I hate adding the 'default' clauses, I'd rather not have the
build output cluttered by invalid warnings.
The exception is the fix in divelistview.cpp - while I don't think it is
possible for this function to be called with no dive selected,
initializing pd to NULL is cheap insurance in case that does happen for
some weird reason.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Keys up and down to increase / decrease stars
and also fixed focus policy for it.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't need to keep the array of zip_source structs. We just need the
latest we created so we can add to the zip file.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is so we can mark the error messages for translation.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a cleaner approach, according to the discussion in the mailing
list. It is also better because we can use QTemporaryDir in Qt 5.
Finally, it avoids having to remember to free it at every point.s
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And make them use UTF-8 on Windows instead of the local 8 bit encoding.
This will also get us the proper NFD encoding on OS X.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The fix for dereferencing a null pointer from me was a bad fix that
broke the possibility of saving a planned dive as a dive.
This is a better fix to not dereference a null pointer and be able to
save the plan again.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When saving / canceling the edition, focus was still being kept on the
current selected widget. not good. :) this patch makes the DiveList
keep the focus after a edit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The problem was the Focus Prevention system on the
EventFilter. Instead of that we can pass the setFocusPolicy (
strongFocus ) that ignores the mousewheel. simpler and cleaner.
Fixes#376
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There was some options on the 'if' that didn't
really belonged there, so I create a if before those
to quit earlier if the condition is true.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should be somewhat faster, and the code is cleaner.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The QPainter::hightQualityAntiAliasing is ignored by Qt,
the docs says we should use QPainter::AntiAliasing.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The color used on the bright theme was cyan, and it's too bright when the
font is also white.
This patch uses the HSL information of the color to determine if the text
color is light or dark, and adjusting the background color for that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We may want to use toUtf8() for win32 considerations.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Unhide menu is only shown when hidden events exist.
Also updates relavent manual section.
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We were asking the widget.font() which returned the font that the
QFontSelector uses to display it's contents, instead of using
currentFont() that's the correctly selected font. duh. :))
Fixes#368Fixes#375
(for #375 the solution is to select a different font that a) looks better
and b) has the missing characters)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is not the ideal solution. Ideally we might want to simply enter the
profile edit mode if we edit a dive that was manually added. But right now
the code contains lots of assumptions about being in one mode or the other
and as we are redoing the profile / planner classes for 4.1 anyway, I'd
rather err on the safe side for 4.0.1
Fixes#374
(well, it fixes the second bug reported in 374 which is quite different
from the original bug)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user edits a dive and then quits we try to ask them to finish
editing, first. If the user did this by either clicking the little 'x'
in the window decoration or by hitting Alt-F4 (or similar), we didn't
have that question (only the 'save changes' question in case the dive list
had already been modified.
Fixes#374
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We appear to be missing the correct dll. I'm out of time trying to track
this down, so I just switched Subsurface to access divelogs.de via http on
Windwos.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previously we would overwrite the gasmix as well as start and end
pressure even when editing multiple dives, which clearly is wrong.
Fixes#364
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This gets the behavior close to what we really want.
- scroll wheel no longer enters edit mode when over the tabWidget
- scroll wheel doesn't modify dateTimeEdit, nor does it enter edit mode
- scroll wheel still scrolls both the notes and the full widget
The only oddity is that when clicking on either the dateTimeEdit or the
tabWidget we don't immediately turn on the 'being edited' warning (as we
do for all the other widgets). For those two widgets the user has to press
a key before edit mode starts.
I think this Fixes#176
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Ideas-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When toggling autogroup in the menu we ended up setting the NO_TRIP flag
for dives that were removed from a trip that was created by autogroup. So
toggling things on and off and on again meant no more auto grouping.
Fixes#337
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user had never set up the language selection they could end up
getting the "language changed, restart required" warning even if they
didn't touch the language setting at all.
This fixes that issue by assuming that UseSystemLanguage is true if the
setting is undefined and only comparing the selected language if that
selection actually matters (i.e., UseSystemLanguage is false).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The open call will tell us what we need to know. Obviously we can't open
a file that doesn't exist. This saves us one stat() or Windows
equivalent.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Casting a pointer to a size_t variable to a pointer to int is wrong on
big endian machines. Not that I expect anyone to compile Subsurface 4
for Mac on PowerPC 64-bit, but just in case... Who knows, we may have
some Solaris-on-UltraSPARC or AIX-on-POWER6 users.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't need to get it for every file, since it's the same. This also
avoids leaking temporary files and memory if the stylesheet cannot be
found.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
No need to allocate memory for something that will show in debugging
only. Besides, qDebug() of a QString adds quotes around it, which we
can do without.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Older libzip lack zip_get_num_entries. Thanks to Lubomir for spotting
the version macro.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Save and restore scrollbar position on editing the dives.
I think this is not the best place for it, but I'll leave
it here for a while untill I find a better place.
Fixes: #343
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes sure that the minimum time / depth is
correctly set on the profile planner.
Fixes: #358
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the same code that Dirk used on the Mac to fix the
bad-behavior of Cylinder Selection, this time applyed to
Weigthsystem selection.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch uses the class created by the previous patch
to get rid of the CSS and be really desktop native. it
fixes a lot of stuff in non-blue-styles and throws
a lot of code away. <3
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The css was done by me in the first days of subsurface for Qt, and it
was a code that I was never proud of. Mostly because I tougth at the
time that it was better to write it into CSS than to create a new class
just to take care of the size of the default cell height on a tree view.
Now I see that it was a biased approach since it created issues on
dark color schemes and it also didn't make a 'native' experience on
Gnome or OSX, only on KDE.
This fixes that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The forward declaration of 'struct device_data_t' is not
needed as it already comes from '../libdivecomputer.h'.
Reported by the program cppcheck.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
ProfileGraphicsView::plot_depth_profile():
The iterator limit check (i < 7) should precede the indexing
(increments[i]).
Reported by the program cppcheck.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Introduce some harness in ProfileGraphicsView::plot_one_event, so we
detect bad stuff and bail, instead of dereferencing undef pointers.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
prepare_dives_for_divelogs() did a silly thing, which I was
responsible for. When populating 'tempfile' we benefit
from QString, but then return a pointer to a local variable
(char *) without alocating it on the heap. This resulted
in undefined behavior, as we don't know the lifespan of that
local memory on the stack.
Patch fixes that by using strdup() and freeing the memory
when/if needed.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When trying to remember a newly manually created dive across the
sort_table() call I abused the dive->selected flag and didn't clear it out
afterwards (most likely thinking "hey, I'm calling selectDive() on this
anyway").
This caused the UI code to correctly mark the dive as selected, but when
it called down to the C code to keep the internal data structures in sync,
that code didn't update amount_selected as it thought this dive had
already been selected. And that caused other parts of the code to get
confused, which manifested for example in the failed upload to
divelogs.de.
So this clears out the flag after abusing it to remember a dive. Maybe we
should add a 'remembered' flag instead, but for now this fixes the issue.
Fixes#351
Initial-fix-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We use the same dialog for both the Subsurface WS and for the
divelogs.de one. Instead of the old title (which suggests download)
we can use a more generic one - "Webservice Connection"
This makes it easy for us to maintain a dialog that can both
upload and download data, while the dialog title is descriptive
enough.
Fixes#352
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If rowCount() is 0 we get an assert:
ASSERT: "last >= first" in file kernel/qabstractitemmodel.cpp...
To solve that we wrap the beginRemoveRows() call in a bnrach:
if (rowCount() > 0) {
...
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Clang yelled about it, and it looks prettier. It also felt kinda strange
to explicit initialize the first element to zero and the rest to zero
implicit.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Initialize diveplan.dp to NULL, so we know that we will bail in
drawProfile, when the initial settingsChanged is fired.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Give user the possibility to re-enter username and password
after unsuccessful upload due to wrong credentials.
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Initialize stagingDive to NULL, so we know that we will bail in
createTemporaryPlan, when the initial settingsChanged is fired.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
At least username and password have to follow each other.
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Post downloading we have an 'Apply' button that can be clicked
to apply/merge the downloaded dives. When uploading we
rename the button to 'Done' and enable the button if the
upload was successful. The 'Cancel' button on the other hand
becomes disabled.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use qDebug() instead of fprintf(stderr, ...) in
prepare_dives_for_divelogs().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The correct way to stop the upload/download is to use
reply->abort(). If the dialog closes, post exec()
we check if the reply 'isOpen' and abort and delete it.
Without this modification the program seems to crash
as the connection is still in action and it attempts
to read an already deleted file.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
We store the user/pass for 'Apply' when downloading, but
we also want to store these values for 'Upload'.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Only show a filename in the error report if such was previsly
set. We also add a string for translation, that is shown
in the main window.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The 'Content-Disposition' header, requires that we pass
'name' but also a 'filename' field.
Suggested-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
prepare_dives_for_divelogs() is based on GTK / C code
where we used GLib methods to generate a temp zip file.
Qt has QTemporaryFile, but it seems there is some sort
of a problem when using with with zip_open
(ZIP_CREATE considered) or at least in this particular case.
To workaround that, we generate a random name ourself with qrand()
and simply pass it to zip_open (with ZIP_CREATE) and then return
the filename.
Also (!), there is memory corruption when trying to return
'tempfile'. This wasn't the case with the C compiler,
to my knowledge. Regardless of this fact the generated
zip does not look corrupt.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
prepare_dives_for_divelogs() comes from the GTK version, originally.
The upload seems to fail at this point with an error.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This patch adds commands to the dialog buttons, to apply
(and possibly show an error if 'parse_file' fails',
reject, or show help - which is a link to the 'divelogs.de'
website.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This is so we can default to the GF's from the preferences. We need the
bail handler in createTemporaryPlan, because its triggered when we
change GF's, and if we don't have a stagingDive there, we will access a
NULL-pointer.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When got auto-rescaling of the depth scale, always reset the depth scale
to what the profile would suggest. This introduces a concept of user
requested minimum witch we will update and not scale down to lower than.
Reported-by: Henrik Brautaset Aronsen <henrik@synth.no>
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When switching between metric and imperial, we should also show that the
different units are switching too. This signals the greyed out
radio buttons to switch to the right system.
Fixes#347
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The groupBox-es got renamed, and thus the unit-systems radio-buttons
was enabling/disabling the wrong buttons.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we start to define a gas, we should use that one by default instead
of air.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Silly mistake in commit 93b5c0cd14 ("Finish download from divelogs.de"):
parse_file() doesn't call process_dives() - the caller needs to do that.
Fixes#344
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When removing the selected dives from their trips, it makes no sense to
check if the pointer was actually pointing at a valid dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On Windows platform translation/ folder contains Qt translation
files as well. This results in extra languages in preferences.
From now we filter these translations and choose only those matching
^subsurface_*.qm$
Fixes#339
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Show language instead of country, sort the list.
Show country in brackets to avoid ambiguity for locales like
de_DE and de_CH.
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Left to do is to remove all the auto-added deco-points, aka the ones
that had entered==FALSE before we created a dive from the plan.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It previously always started with o2 in air, now we start with 0 as its
the same default as in the cylinders too, which fixes a uninitialized
index there too.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the scale is too big or too small, adapt the scale automatically.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
otherwise the previous selected dive is still visible in the profile
view. clicking on edit crashs subsurface: null pointer dereference in
editCurrentDive as it uses 'current_dive' which is null.
Signed-off-by: Martin Gysel <me@bearsh.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use proper case and subscripts for gas names on profile legend.
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Telling Qt that the "Preferences" menu entry is
QAction::PreferencesRole will make it be moved to the System menu on
Mac, for example.
Fixes#327
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is far from perfect.
Avoid a weird warning when total = -1 is passed into the progress bar.
Enable the Accept button once the download completes.
Merge the downloaded dives into the existing dive list on Apply.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt has a really strange API for directories. when you create a QDir
and set's the currentDir on *that* QDir you created, it's for the
whole application and not just for that variable. Then when the
variable is out of scope, the directory doesn't change back - ugh.
The solution is not to call setCurrentDir on the newly created QDir (which
was quite good since it's also a code cleanup. )
[Dirk Hohndel: modified to undo the far less elegant fix I had made in an
earlier commit]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These complete the ability to select languages from the preferences panel.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a filter option to the Language Chooser.
if you choose filter, only the filtered options will appear.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code that should set the preferences was actually retrieving it,
this will correctly set it.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When the user first opens the application the default language is
selected; this can be changed to a hardcoded one by going to system
preferences and choosing the one you want.
Restart required.
Fixes#136
[Dirk Hohndel: whitespace fixes, removed qDebug() call, rephrased the
message displayed prompting the user to restart.]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We do not support rows larger than a single page as the
PrintLayout algorithm will enter an infinite loop,
therefore we put a limit of 15 lines for the location text.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch improves the algorithm when estimating where
to put the new page header in the table and how we move
larger dive rows on a new page. It now performs a couple of
'passes', where the first one processes the table and the
second one is used to compensate for the lost space.
Fixes#326
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
setTitle() works with an enum that can be fed different values,
and other we may have eventually. For example not only "app title",
or "app title: filename", but others, like dates, certain app status
and so on.
Patch fixes an issue where deleting a single dive in the divelist
resets the title to "Subsurface" only. clearUpEmpty() should only
call setTitle(MWTF_DEFAULT) if no file is currently open.
It also adds a safe-guard to revert back to MWTF_DEFAULT if
no file is open but setTitle is called with MWTF_FILENAME.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The whole procedure here is quite confusing.
Once we have our model populated, we need to estimate where
to put page headers (each page has one) and to do that we
store a list of indexes, where a page would begin (pageIndexes).
But since a row can end up being chopped at the end of a page
we move it to a new page and this particular part was lacking
compensation for the moved row's height, when storing the *last*
pageIndex.
For N number of pages we are losing N - 1 dives, or such that
were previously transferred on a new page.
See #326
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a different icon for a Bookmark Event, and it
also cleaned a lot of code. :)
See #300
[Dirk Hohndel: made the two icons slightly bigger]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes a better assumption of the location for the
legend in both View and Print modes. It also fixes a few oddities
that we used to have ( like hardcoded spacing ).
We are taking the scene().sceneRect() now into consideration to
better place it on canvas.
Fixes: #322
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I can't really see any point in passing a local loop variable around,
and copying a uninitialized pointer. Better use local variables there
and let the compiler optimize them away if it feels for doing that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Sets the limit for GF's in the preferences panel to 1<=x<=150 and color
it read if gf > 100. Remove the % in the diveplanner view that was
rejected for the preferences view.
The 150 maximum is needed because QSpinBox defaults to maximum 99.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The separator selector in the CSV import dialog was unused. This passes
the value into the xslt and adds ',' as possible value.
I'm sure this could be done much better (pass the actual character instead
of the index), but I couldn't get that to work and this does seem to do
the trick.
Also added a test dive to test this feature.
Fixes#321
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This backs off a little on what was added in commit c1102a38f3 ("More
gradient on the partial pressure graph.") - the numbers simply got too
busy. I also slightly changed the positioning of the numbers to be a
little more "natural looking".
Fixes#323
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The layout of Subsurface on Gnome 3 had a few flaws, since Qt and Gtk
are not really compatible. This implements a CSS that makes the use
of Gnome 3 more pleasant to the eyes.
Fixes#318
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Hitting apply in the preferences dialog causes a QList assert.
This led to DiveListView::reloadHeaderActions(), where
we have an out of range access.
Patch makes the column count match the header action count.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the PrintLayout constructor we receive a pointer
of PrintDialog, but the type is incomplete, as we only
forward declare it in the class header. If we decide
to eventually call a method from PrintDialog we also
need to include printdialog.h in printlayout.cpp.
The patch also fixes a similar issue in printdialog.h.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
printTable() now emits a 'signalProgress'
to the PrintDialog's progress bar, but it has 3 stages (loops):
- pupulate a model
- process all rows
- render the table in pages
This requires that we also separate the progress in 3 stages
of 33%.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
estimateTotalDives() is used to calculate the total dives
to be printed, it requires a 'struct dive' pointer
and a couple of 'int' pointers for the iterator 'i' and
'total' return.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The dialog was missing a 'Close' button so we add it.
Also change the mnemonic of the 'Preview' button, as it
was the same as the one for print 'Print'.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
I don't recall why but this dialog ended with a fixed size
(setFixedSize()), so it has to be re-adjusted each time a change
is made in there. We resize it to compensate for the addition
of the progress bar.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
We rename our old 'Print' button to 'Preview' (as it did just that),
and add a new one called 'Print' which does the direct printing,
by creating a QPrintDialog instance. Both buttons are located
on top of the dialog for now in a QHBoxLayout.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The entire dialog is 'temporary' and should be replaced,
so we slightly modify the comment about the PrintOptions widget.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This dialog will be eventually replaced by a better one, but
for now we can add a progress bar to it. Next step would be to
add separate Print/Preview buttons and emit progress bar updates
from the PrintLayout class.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
We don't want to add the last sample - the dive plan functions want to
figure out the path to the surface by themselves and get confused by this.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch attempts to fix the 'click goes to 0,0' bug on the
globe. it moves a bit of code around and I particulary don't
like the way that we are dealing with 'EditMode', I think I'll
refactor that for 4.1. We are alredy dealing with a bunch
of states, maybe a State Machine will help on removing code-complexity.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Selects the newly added dive after adding it, it uses a
rather ugly hack that forced a unselected dive to be
marked as 'selected' so we can remember what was the
newly added dive, and select it after.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
NDL and TTS doesn't show up in the printed profiles, and it takes
significant time to calculate, so just don't do it.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This implements support for:
* uploading a zip file containing dives - untested
(the zip file must have been prepared elsewhere)
* downloading the dive list and the dive XML files
The networking part is finished, but it's missing the actual import of
the XML files sent by divelogs.de.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
The time out is 30 seconds from the start of the request or from the
last time we got any data from the server.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
QNetworkReply might emit signals after it's been told to go away. We
don't want to change the status after that.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Re-enable buttons that should be enabled by default, disable the others,
set the status to empty, make the progress bar go back to zero.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Just my OCD asserting itself. It looks cleaner this way, if the static
functions aren't interleaved in the middle of the WebServices class.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
One of the rules of using QNetworkAccessManager is to share it among all
users, since sockets and other state can be shared. Looks like Marble
doesn't allow us to set it, though, and it creates multiple instances.
I'll prepare an upstream patch to fix that sometime.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
An addition to the "Move dive notes edit message above the
scrollable widget" commit: Make sure the save/cancel message is
always displayed on top, regardless of which tab is selected.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- Removed the "Visible:" header on the column selector. It doesn't
have to be there, and it's not in the similar equipment column selector
- PO2 --> pO₂ (and others)
- Use same initial case in the units selector in preferences
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds legend for the partial gass pressures if the
graphs are active. when enabling / disabling the square
that represents the color of a gas will also appear / disappear.
Fixes: #272
[Dirk Hohndel: minor changes to layout and whitespace]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The "Save" and "Cancel" buttons disappeared when scrolling to the
bottom of the notes widget.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the 'mouseClicked' didn't get any dives at the click-geolocation,
ignore it and do not try to select an empty selection. this was
causing a lot of issues when map-navigation.
Also, good deal of code cleanup.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
commit 3c064d5857 ("Make the message when editing a dive fit better")
kinda fixed the wrong problem. A better solution was suggested - just drop
the instructions regarding Cancel / Safe. It's quite obvious what to do
mow that the buttons are part of the message.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For the names that we have in our "default set" we need to store the
English name so Subsurface will "do the right thing" when opening the file
in a different locale.
With manually entered names in a local language there's not much we can
do.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This piece of code didn't need to be on the for-loop, so
let's remove it out of it.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old code ( slow++ ) ignored that each new dive-selection
we recreated all information on the profile window, so this
version ( a lot more verbose, I know. ) will ignore all dives
that are being selected and will only send the 'dive was selected'
information in the last line of the algorithm, instead of calling
it for each dive on the list of 'to be selected' dives.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Still trying to fix the same issue that I already tried to address in
commit e0b70b82ca ("Fix translation of weightsystem names") and before
in commit dc03b7e7d6 ("We need the correct context to translate event
names").
I missed the WeightModel. Hopefully this was indeed the real fix.
Fixes#312
(I know, I keep saying that)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should keep the message widget visible without horizontal scroll bar,
even on fairly small screens.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The button box on the bottom of the window made it a bit cluttered
on small screens, this patch uses the window of the MessageWidget
to show the butons - this way less space is used and things are better
spaced on screen.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a context menu to set the dive location
via the globe, being the dive with a coordinate or not.
It also fixes setting the dive location on edit mode.
Fixes: #315
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We add the "maximized" entry for the settings group "MainWindow",
and store it on close, so that the window state is the same on
the next run. But then also, we only store the window size and resize
to that size if not maximized. This attempts to preserve a "restored"
window size.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is very much the same as in commit dc03b7e7d6 ("We need the correct
context to translate event names"). I didn't pay enough attention when
reading the bug report and missed that the weight system names were also
not correctly translated.
Fixes#312
(I hope this time for real)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When editing air or water temperature, you are actually editing the
information in the active divecomputer structure. But the Dive Info shows
the summary data created from the temperature data in all dive computers.
For most people who will only ever have one divecomputer per dive this may
seem like an artificial distinction, but it's very important if you track
more than one computer.
So in order to have an edit reflected in what's shown, we must redo the
"summary creation" for data from the different divecomputers into the
summary fields of the dive.
Fixes#313
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt assumes that all strings are in the context of the class in which you
use them. So when we want to display the translated event names from
within the ProfileGraphicsView we need to make it explicit that these are
strings that come from the C part of the code.
Doing that showed another bug in the code where we foolishly compared the
translated text to a fixed string. Not smart.
Fixes#312
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Subsurface creates a lot of singleton instances on demand, but nothing
ever deleted them. Since they are singletons, these memory allocations
are technically not leaks. However, they clutter the output in valgrind
and other memory analysers, hiding the real issues.
The solution is to delete these items at exit. For the models and for
gettextFromC, the solution is to use a QScopedPointer, which will delete
its payload when it gets destroyed. For the dialogs and other widgets,
we can't do that: they need to be deleted before QApplication exits, so
we just set the parent in all of them to the main window.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Found by Dr. Memory, run by Lubomir:
Error #48: UNINITIALIZED READ: reading register al
# 0 StarWidget::mouseReleaseEvent() [qt-ui/starwidget.cpp:29]
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- Hide the sizeing sliders from PrintOptions. we don't really
support any of those in PrintLayout and these are not that
useful and easy to implement, until some sort
of layouting/templating system is in place.
- Move the 'Print' button on top as a workaround, since if
it's bellow the print options it stays bellow an empty area
where the now hidden sizing sliders are.
- Resize the dialog to a smaller size
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Make it consistent with other application dialogs.
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The translatable string in about dialog is truncated at the
VERSION_STRING. Thus it has to be given as argument to the tr function.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When there are no trips at all, we have to skip the Yearly statistics
alltogether, including the header line (that should display all the
dives added together).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We now only use a slightly large font for the "Dive #" entry.
All other font sizes remain at 9px.
Another change is that we now attempt to use 11px for
individual row height. This makes the table at least 12px bigger
(n_rows * increment), but does not cut letters like 'g',
which go slightly bellow the font baseline.
Perhaps this can be improved later by adjusting the font
and row sizes again.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
nr was used but never initialized.
Also, the code removed used select_dive had likely just been forgotten to
be removed when the correct code using selectDive() was added a little
later in the function.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
c++ have some idea about in what order things should be initialized.
This makes us comply with that order.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use the same case for the first letter in the dive table column headers,
use '%' for both gases in the planner, and show "Start time" instead of
"Starttime".
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The "air / water Temperatures" label didn't look to good.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We update the values for divemaster, buddy and etc...
Rating and visibility are currently displayed as "x / 5"
values.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Following the new layout for the profile print, we separate
the used gas like so:
AL80 / EAN33 / ...
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
There is not enough space for the last column in "6 print"
even for the english text. This gives more space extending
the row, but for some languages it will be an issue, thus
strings have to be eventually shortened by the translators.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
ProfilePrintPmode::truncateString() was not really needed,
because long text *should* be trunctated by the table itself.
Also we now are going to have multiple lines for notes,
so the auto-trim should work.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Since some early bird thought it was a good idea to force the rest of us
to get up early by changing our clocks during summer, we can not use the
currentDateTime() to determine the timezone offset for all dives.
Instead, we just pretend that everything is in UTC and avoid doing the
offset calculations.
If only that early bird knew that if clocks stayed consistent throughout
the year then I could be asleep instead of fixing this in the middle of
the night..
Signed-off-by: Michael Andreen <harv@ruin.nu>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Simply clear the edited dive (regardless of whether it's set) and hide the
message if visible. The previous code was a little too convoluted...
Fixes#305
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need the marble data to go into a subdirectory of /usr/share/subsurface
and we need to search for both data and marbledata when trying to find the
theme.
Fixes#310
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I'll admit that I don't fully understand this part of Qt.
But commenting out the deleteLater (like we already do for another one)
fixes the crash - and shouldn't do more than add a potential small memory
leak.
Fixes#309
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
'Show' verb is already shown in the groupbox title and no other
labels have it.
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes ToolTip Item showing out of boundaries
Tooltips when in resizing animation.
Fixes#294
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes it possible to hide some columns on the Cylinders
Equipment pane. The 'remove' and 'type' are impossible to hide,
since they are the most important ones for a non-tech diver.
Fixes#281
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a bit more of gradient on the lines for the partal
pressure graph grid, it also moves a tiny bit to the side the
even numbers so it's easyer to read when they are too near each other.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previous show and save code would have aborted at the first invalid
weight system. This makes sure we save and show all weight systems up
until and including the last valid.
If we had:
integrated: 1kg
belt: 2kg
ankle: 3kg
And changed belt to 0 kg, we would have only saved integrated 1kg, and
nothing about the belt or the ankle weights. This will save all of them,
and show all of them.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previous code aborted at the first invalid cylinder. This instead finds
the last valid and prints all the ones up until that one.
Fixes#295
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When editing a dive, a group of dives or a trip we need to make sure that
we don't lose track of which dives and trips were selected. Otherwise we
might act on dives that DON'T appear selected in the UI but that we think
are still selected.
Fixes#304
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We have allot of helpers, use them instead of local variants.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since all internal units are in mm we needed to only update what's shown
on the interface.
Fixes#299
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a workaround, I plan to remove that toolbar from inside
of the Profile for the next version, but since it's there for now,
let's keep it.
This patch hides the toolbar when the zoomLevel != 0, since the
profile is unclickable while zoomed...
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch remembers the trip selection across the Dive Tree Model.
It's a tiny bit big because we used to have a variable 'selected
trips' that's now calculed dynamically - this is more future proof.
This is a start of Un-cluttering the view ( for 4.1 I hope to reduce the
code in this class to nearly a half. )
Fixes#303
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When resizing the ProfileWindow and the tooltip was out of
boundaries, it was really out of boundaries and there was
no way to get it back ( besides re-expanding the window. )
this patch moves the tooltip to (0,0) and don't save that
position, so when the window is re-expanded, it will move to
the correct location again
Fixes#237
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The fix for 'double click on the map shouldn't zoom' had broken the
selection of the current location for the selected dive, this patch
fixes that.
See #291
Signed-off-by: Vinicius Machado <vsmachado@gmail.com>
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds trip based statistics to the Yearly Statistics
view.
Signed-off-by: Miika Turkia <miika.turkia@nixu.fi>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With this every cylinder downloaded from a divecomputer that doesn't
provide cylinder data, and every cylinder manually added anywhere will
default to the default cylinder that is set in the preferences.
For people who most of the time dive with the same equipment (always on
dive boats with AL80, or almost always diving their personal HP119) this
should be a nice improvement.
If you don't like this behavior, simply leave the default cylinder setting
in the preferences empty.
This commit also fixes the incorrect s->value call (should be
s->setValue). I wonder what this did to the default filename before...
Fixes#145
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't do anything with this just yet.
And frankly, a drop down of the cylinders that we know of would be even
better. But hey, it's a start.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When editing a dive and clicking save button on menu bar, it saved
dive information but didn't mark dive as not being edited anymore.
For closing file, user should always click on the save button on
the bottom of the page and then saving it.
Now when clicking save button on menu bar, it will call the
accept_changes before saving to disk.
Signed-off-by: exhora <exhora.tat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Actually, it's not so much "work around", it's just "disable our eye candy" for
tags on Mac. This is quite frustrating. When we do anything that has the
QPainter touch the widget from our GroupedLineEdit::paintEvent() path then the
QPlainTextEdit::paintEvent() doesn't render the text of the tags.
Fixes#298
Sort of.
But I guess tag text without eye candy is better than eye candy without tag text.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Later we spacifically enable the scale, but Dirk asked me to
use the bare minimum of marble.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Marble is a weird piece of Qt software, it seems that it wasn't
thought of being a library when first written. Most of its features
are not achieved by subclassing && overriding one of Qt default methods,
instead we need to eventFilter for almost everything ( which is a pain,
and a bit error prone - see our combo box delegate *puke*. )
This one's ready, only one thing though - if we want to implement
our own context menu, we will need to use the eventFilter, and not
the contextMenuEvent.
Fixes#291
[Dirk Hohndel: this does not disable the context menu for me...]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A user could have hiddden and lost any of the four panels
on the interface. Now when he chooses 'show all', if a
part of the interface is hidden, it will be shown again.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I think we should actually fill the app with tooltips and
whatsthis hints. justsain ;p
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Better positioning of the text on the table cells. On KDE systems the
text got too near the line that divided the cells, this way the text is
placed on the middle of the cell.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes the correct sizes of the tables when first opened. It was
defaulting to 'resizeToContents', but most of the cases when first opened
we got no content, and this was bad. Now I'm defaulting to 30 when on the
'REMOVE' column and 80 on other columns.
Fixes#189
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When a gaschange to air happened, the code did
name += name=+ tr("air") which probably was due to the block being just
confusing with all the ?:
Unrolls to proper if statements, and fixes the bug.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a checkbox to be able to import csv files without temperature.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This rewires things a bit to make room for new features coming.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Before, when clicking the OK button on the preferences GUI, we were
updating in-memory preferences from the GUI, saving them to the
configuration file from the GUI, reloading from the file to the
in-memory preferences. Then, to add to the ducplication, when the
application was exiting, some fields were saved again.
Basically the first step and the last step were useless appart from
the fact the the other steps where missing a few fields here and there.
This patch removes the first step and fixes the missing fields.
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
ACKed-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is an ugly hack as it partially breaks the ability to abort a selection
(so if you click outside of the combobox, the last value you hovered over is
selected). But this seems much better than not being able to select a different
tank at all.
Fixes#275
(and by 'Fixes' I mean "hacks to sort of make work"... but the trac automation
is rather inflexible in which words it understands...)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This (together with the commits fixing the QMessageBox title) should
finally close all the issues in bug 250.
Fixes#250
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a bit hacky and simply adds the title to the message text when
compiling on a Mac, but hopefully this will be enough.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a bit painful, but we basically walk the samples and pick the
valid tank from the events. And then we do a simple discrete integration
to figure out the mean depth per tank and duration per tank. And then we
assemble all that into per tank statistics.
Strangely the value calculated here seems slightly higher than one would
expect from the overall SAC rate. This inconsistency should be
investigated a bit further, but my guess it it's based on the assumption
that the DC provided mean depth is possibly more accurate than what we can
calculate from the profile.
Fixes#284
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows to add missing gas change events to the currently shown dive
computer. Only gases defined in the Equipment section are offered.
Fixes: #250
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With this commit one can hide all events of the selected type through a
context menu on the profile.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Based on the code in the Gtk branch.
[Dirk Hohndel: whitespace cleanup and changed the message text]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds the menu, it just doesn't do anything, yet.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This shows how much gas form each cylinder was used. I would like to add
SAC to that list too but it became a mess trying to calculate average
depth per cylinder.
Design based on idea in #284
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Better handle the mouse movements on the add dive profile,
when outside of the canvas boundaries. It had bugged me for
quite a while, but this is so much better.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch re-enables gas selection through in the add dive profile.
Good thing ( and I really didn't think of that before ) is that
it is less than half of the code of the other implementation.
:D
Fixes#265
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We didn't take into account that last == first when checking for
the first item on the list. Now the gas is correctly placed on screen.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit removes obsolete code, there was a
gaslist selection when user clicked on the buttons, but
this shouldn't be anymore, since the next commit will
add a menu to select the gas for that particular point.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It looked kinda weird without a separator between the SP change and the
bailout.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Two errors fixed.
- With no location set, the summary line would start with a ','.
- When auto creating a trip for a manually added dive or when editing the
dates of dives in a trip, the timestamp for the trip was not updated
after editing the dive.
Fixes#293
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The rememberSelection() / restoreSelection() functions ONLY handle
selected dives, not selected trips. This is a bit of a misfeature, but
because of that we need to make sure we clear our notion of selected trips
when we use restoreSelection()
Fixes#285
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
O2 + He + N2 = 100%
(well, there are some other gases, but this is close enough)
Since N2 can't be negative that means we should refuse any change where
O2 + He > 100% (or o2.permille + he.permille > 1000).
Fixes#280
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This seems like a much nicer user experience. Editing a location's name is
immediately reflected on the globe label, the moment it happens.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When modifying or adding a dive location on the globe widget while in dive
edit or dive add mode, we now show the modified / new location right away
on the globe (assuming a location name has been given). This makes it much
easier to manually reposition a dive location.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we are editing or adding a dive, the globe widget needs to act
differently. Instead of directly changing the lat/lon of selected dives,
it needs populate the coordinate text field as if this information was
entered by the user (effectively all it is is a way to more conveniently
enter coordinates).
As a side effect, this also allows us to change the location once it has
been added (you just need to go into dive edit mode to do so).
There is one weird issue that occasionally (and I can't quite reproduce
this) I get lat/lon very close to 0/0 (as if the globe widget was centered
on 0/0 and not on whatever it is actually showing). That still needs to be
addressed.
Fixes#239Fixes#131
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is about the right size, but the scaling pixelates the icons. So this
is not really a fix, just a hack.
See #269
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Change the order of the increase / decrease depth button on the planner
since 'bottom' means increase depth and 'top' means decrease. Sorry
I'm too undiver currently :)
See #269
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The number 0 means "this dive has not been numbered". So manually
assigning this seems wrong.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user doubleclicks on the number of the dive in the dive list,
this will present to him a dialog to change that number. Pressing enter
will renumber the dive if there's no dive with the same number already.
Fixes#288
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch is a crude attempt to 'anchor' the bottom of the Dive
ruler editor ( the new graphics ) to the bottom of the scene.
since QGraphicsView doesn't have a good way to modify the origin
point of an item, I'v just shifted all other items up a bit, this
way the 0,0 point is in the bottom of the drawing and I can safely
move it around, making it bottom-anchorable. :D
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This flag is added to all items on the parent, so there's no need
to implement this on all of them.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- get_gas_from_events does NOT always set o2/he. It only updates them IFF
a matching event is found; so we need to make sure we start out with a
valid gas mix
- the way we tried to restore the edited dive in case of an edit to a
manually added that is cancelled was completely bogus. Way too complex
when we can simply and reliably simply store the dive and then copy it
back
Fixes#270
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When cancelling the edit of a manually added dive, we should send the
sample with timestamp 0 to addStop - that's a magic value and causes us to
add a node at 5m/15ft and 10 minutes instead. Since the dive always starts
at the surface, calling addStop is redundant, anyway, so let's just not do
that.
See #270
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit 85fab31c71fc ("Shift times of selected dives") we added a dialog
that didn't align its content very well. This change improves the layout
(I hope) and makes the labels in the layout clearer (earlier and later seem
easier to correlate with the direction of the shift).
The original commit also forgets to deal with the consequences of shifting
the dives. The dive list needs to be re-sorted (as the relative order of
dives could have changed) and be marked as changed. And we should try to
maintain the selection across these operations.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds the possibility to shift the times of all selected dives
by a fixed amount to correct for time zone problems or mis-set dive
computer clocks.
Select the dives and right click in the dive list.
[Dirk Hohndel: added .ui file to FORMS and fixed some whitespace damage]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to check for this whenever we do something that directly or
indirectly closes the data file. Previously we were missing the straight
"quit". Also, we should consistently check for both editing or dive
addition. And lastly, we should use consistent language with commit
0e9cd09442 ("Make editing message consistent with button labels").
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Removed the ugly icons on the visual profile editor and replaced them with
the much better looking ones that Luisa designed. This was not a simple
search and replace since Luisa's design was a bit more sophisticated.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This honors the sort order of the dive list when figuring which trip is
"above". It works both on a single dive or all selected dives.
This also fixes a couple other cases where the dive list selection and
trip display could get messed up.
Fixes#287
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- Dive list no longer has messed up trip entries
- Dive list is now correctly marked as modified after trips are merged
- When data file is closed, the list of selected trips is cleared which
avoids a potential crash when loading a new data file
Fixes#286
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Changes Ok button to a Save button Modifies editing messages to reference
buttons Save and Cancel.
Fixes#245
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- Allow ssrf as a default log file suffix.
- Allow sde/dld/db as import log suffices (we don't use the LIBZIP
and SQLITE3 ifdefs anymore)
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes it possible to set the coordinates on the map for
all selected dives. Note however that after a coordinate is set,
user cannot edit it unless he multi-edit it with a dive that doesn't
have coordinate's set. this is just because it's missing a 'edit coords'
button.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of hard coding a American date format, let qt use whatever the
locale suggests.
Fixes#248
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We incorrectly mapped the profile's widget tooltip based on the
global screen coordinates.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fixed a crash with trying to show the tooltip on the profile,
with an empty profile. Since the widgets are not created yet,
we got a crash trying to access the toolBarProxy.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This limits merging dives to dives that have at most half an hour of
surface time between them. That "half hour" is kind of a random thing
to pick, but it's not horribly horribly wrong.
It also changes the semantics of "merge selected dives" to something
that actually works pretty well: you can select a whole range of
dives, and it will merge only the ones that makes sense to merge. I
tested it, and it's reasonable. I could select all my dives from one
dive trip, and then do "Merge selected dives", and it did the right
thing (Dirk: I selected the florida trip, and it merged the aborted
"missed the trench" dive with the _actual_ "trench" dive).
I'm _slightly_ hesitant about this in the sense that maybe some crazy
person actually would want to merge dives with more than half an hour
of surface time between them, but it really doesn't seem to make much
sense.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch removes a duplicated method: get_divenr and
get_index_for_dive. The two are exactly the same ( if my
c is not broken, but I may be broken since I'm working like
crazy for almost 30h nonstop. ), so please take a good look
before applying this one.
[Dirk Hohndel: Tomaz took the slightly broken of the two implementations,
so I switched that out for the correct one]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I hit this bug on deleting dives and the newly selected
one got inside a trip, that wasn't expanded. anyway, easy one.
:)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes a selection just after the dives that got deleted,
or nothing if the list is empty.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When the dive is deleted, we force a recreation of the dive list,
this is done because we were broken by design on the first transition
to the Qt infrastructure - one thing to change for 4.1, but no time
for 4.0.
We forgot to ask the headers to 'please, span more than one row,
please' when we recreate the model. easy =)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch just reverts some wrong changes that I'v done on a
past commit ( sorry ) and correctly handles the selectDive,
by using a IDX instead of the dive pointer, as dirk told me
it's extremely error-prone since the pointer can change.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When moving the horisontal splitter the cylinder and time/depth boxes
didn't scale down but got "stuck" on a certain height. This makes them
scale down when pulling the horisontal splitter up.
I would prefer if we could scale them individually, but i didn't manage
to get that going, but i didn't manage to get that going.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's very important when programming via Model/View, in gtk or qt,
to not mess with the model data outside of the model. We were
deleting stuff that the model controlled outside of the model, so
it thought that there was still data there. This fixes the deletion
part, but there are also lots of other parts that I'll tackle in
the next commits.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
To our addStop method time = 0 & depth = 0 are a magic flag. And since we
always start at the surface, that is assumed, anyway. So let's just not
add a stop for that when re-creating a plan from a dive.
Fixes#254
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is nothing but an indefinite time sink. Let's focus on things that
the majority of our users actually need and use.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In various occasions the branches of selected dives
got collapsed because I'm dummy boy and didn't programmed
the logic correctly.
This one correctly works for the few cases that I'v tried,
I'm verifying if the current selected index is a trip or
a dive, and asking to expand it.
The expanded state is lost because we delete and recreate
the model ( and we do that because we can switch between
tree and table model ).
Now I think we correctly track the cornercases.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch changes the string 'collapse' to a more meaningfull
'collapse others', it also scrolls the view to the first selec
ted index, since after collapsing the others, things could be
in the wrong position.,
Fixes#233
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch enables tooltips on the profile toolbar. Tooltips were
being treated as text to be shown at notification area. Now it is
verified if the cursor was positioned over the toolbar when it
activated the event. If so, tooltip is shown normally.
Fixes#238
Signed-off-by: exhora <exhora.tat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
No need to add more code to Subsurface by bringing in std::string too.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit enables a context menu to remove dive handlers,
because it was hard to find that ctrl+click selected it,
then a delete button press removed it. it's better now. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When completing tags, the case of the completion prefix
should not matter.
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit 0f50b73f9e ("Fix planner / add dive handling of DiveHandler
Points") some issues were introduced. While it is fine to remove the
artificial first point at the surface, the commit broke the special
handling for o2 == -1, i.e., the usual case where a default gas needs to
be picked.
This generalizes the algorithm previously used to also look to the right,
now that we are no longer guaranteed that there is a first point to our
left.
This also cleans up some whitespace damage introduced in the same commit.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Dirk, is this really necessary or it's just something that you forgot
to remove? this is adding a bit of pain to fix some issues on the planner,
so I'm commenting this out untill you have a bit of time to look at it.
It looks like this was added to handle the gas in the pos-1, but you reverted
if so, this completely reverts it, and things works as expected again.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adds the first DiveNode at 5m / 10 minutes when clicking on the plus
button on the DiveNotes Table.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Somewhere we broke this, most probably in the code that activated the
planner to be used together as an 'add dive'. This commit makes the code
workable again.
There's one thing, though. if the model is empty, this will add something
in the first point - it's behaving strangely. I'll try to fix this in a
way that's invisible to the user, but overall, why are we inserting
something in the first(0,0) time and depth?
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The air types model had a font bigger than the
other models, this patch creates a data() method
that correctly delivers the correct font.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
What happened before was that the AirTypes model was only being updated
when the user requested to change the air by clicking directly
on the Air, in the planner ( but not on the Air Table. ).
This fixes it by calling 'repopulate' whenever the cylinder model
changes ( by adding, removing and changing something.)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch closes the air list when clicing outside of it,
making the use of the planner more pleasant.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Rewrite of the way we handle the last used directory for the loading /
saving of files.
we didn't reuse anything for the code, and that's error prone
and also dumb =p. Reworked that so we have a nice method
to help us out on that. lastUsedDir and updateLastUsedDir
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We can wire qt to call the right functions directly, so we don't need
these members.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Switch to using a QSpinBox instead of a QLineEdit. This makes it a bit
more intuitive and now you can see how the deco plan changes based on
the GF's.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the Gtk version there were no option to disable the showing of time
in the mouse over, so this removes that option to limit the amount of
clutter in the settings panel.
This also renames the time and temperature to match the names they used
to have. T -> @, Temp -> T
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Mostly based on suggestions by Tomaz and Luisa (but with some changes
based on my rather strongly held believes).
I also tried to clean up the shortcut keys. Not sure if I got this right.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This failed spectacularly when I first tried it, so I put it on the back
burner. And it appears that with all my recent fixes for "add dive" as a
side effect this is working, too.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I probably broke this a while ago, as I was not using the big
dirk dive file to test ( just using some random files over the
test folder. )
Now it's working as it should.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The last commit correctly setted the minimumSize, but
I forgot to set the maximum size, and thus, it still
expanded. sigh.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes the Air Types widget on the planner smaller,
since on most dives users will only enter 1 to 2 dives, it's
not good to have so much whitespace. this makes it smaller for
small screens, and it will grow on bigger screens where space
is not an issue.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fixes the last column adding a horizontal scroll on the dive list,
since we have the hability to show / hide columns, I had to create
a helper method to discover what is the last column and set the
size of it very small so no scroll is created.
Also, I'v set the setStrechLastSection to true. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes the edition of alphanumeric input,
columns like depth accepted '23ft', '20m' or '30', with
an inplicit conversion to the unit. But the code ignored
that the input could have a 'ft' or 'm' ( ot anything else
for that matter.
Signed-off-by: Taiane Ramos <exhora.tat@gmail.com>
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit scares me. Any pointers to dives or indices into the dive
table... anything like that is invalid after we resort the table. Well,
not technically "invalid" (as in bad pointers), but after re-sorting the
table these will possibly not be pointing at what we expected.
This starts with the selection being "wrong" after we add a dive that
isn't the last dive (once we click OK the chronologically last dive will
be selected).
But of course without doing this, our #1 assumption about the dive_table
is broken. The dive_table is supposed to be in chronological order.
Best advice of course would be "don't enter dives out of order" - but of
course that's not realistic.
Fixes#234
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is subtle. Normally you would expect someone to edit the tank data by
simply clicking on it in the equipment tab. But a user could conceivably
edit the tank data after clicking on the profile editing button instead.
This works now as well.
This also addresses the issue that start and end pressure were not shown
in profile editing mode.
Fixes#235
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We remember what was selected before and restore it. Maybe there's a more
"Qt way" of doing this, but my implementation appears to work :-)
Also remove unconditional debug output that snuck into an earlier commit.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When right clicking a dive on the divelist a dialog for selecting a dive
was opened. However, Save As requires a getSaveFileName dialog so that
user can give a new file name as well as selecting an old file to
overwrite.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I missed this one spot when converting back to the different semantics for
divedatapoints.
With this change add dive appears to work correctly (fingers crossed).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We carefully assembled the correct data in the cylinders - don't replace
that data when manually editing a dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Otherwise adding a second cylinder (to the default one cylinder of air)
and subsequently changing the gas of that cylinder will illogically change
the gas used in all the segments.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- you can no longer delete a tank when its gas is in use
- therefore you can no longer delete the last tank
- when you change the gas mix of a tank, the corresponding segments in the
dive change as well
- when changing gas for a segment the correct available gases are offered
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Right now hardcoded to AL80. This way in the future we'll have a volume of
gas that's available. And this makes much more sense then a random string
in the description field.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While the argument could be made that this is just a symptom of Subsurface
getting very confused about the selection (which it still gets at times -
most likely we are calling select_dive() instead of selectDive() (or the
corresponding deselect functions) in places where we shouldn't), but
either way, we should not crash.
Fixes#220
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We previously did did bad things when running with an empty configuration.
This attemps to clean it. We will now correctly handle the splitters in
almost all cases ( if I didn't break anything on the way. )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the offending commit a QWidget was changed to QTableView, but
only in the header - and thus making avaliable all method calls,
but the initialization of the widgets was still a QWidget, and
nothing of QTableView was used besides an incorrect call to
setColumnHidden.
This commit fixes that by using the view() method provided by the
TableView implementation which returns the true QTableView that should be
used for specific nitpicking, like hidding columns. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Let the user choose if the calculation of ndl and tts is worth the time
it takes.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previously gps information was always overwritten, unless the user had
modified it in the current editing session. This causes problem with
some use cases, like when coordinates are provided before the location
name by the companion app.
Now gps information is only overwritten when it is:
- Empty
- Auto-completed in the current editing session. (When the user hits
accept it is considered hand-edited.)
Signed-off-by: Michael Andreen <harv@ruin.nu>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This now offers the correct gases for which we have cylinders defined.
For both the planner and add dive we still don't end up with the correct
cylinders in the resulting dive. But that's for another commit to fix.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should leave the program in a consistent state after add dive was
cancelled (and do the right thing in case the dive list was empty).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This just makes sure that we do the right thing with the staging drive,
that we don't mess up the selection, the we are smart about using our
helper functions, etc.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This partially reverts changes in commit 1b655d5c806b ("Correctly track
gases when manually adding and then editing dives") as it turns out this
did NOT help us correctly track gases (which is ironic, given the title of
that commit). I didn't actually want to revert that commit as
infrastructure has changed since then and this made the patches look even
more incomprehensible.
So we are back to tracking the "gas on which we arrive at this spot" in
each dive plan node as this makes the rest of our planning so much easier
- I had forgotten about the reasons why we did things this way when I made
the above mentioned commit.
Instead we now make sure that our available tanks are added the correct
way, that such entries are ignored when planning and when drawing the
editable profile, and that at the end it all gets assembled correctly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
To make the planner work this adds a new column to the Cylinder widget
(depth - for the depth at which we want to change to a certain gas
during deco).
This also tries to hide that column in the equipment view and hide the
start/end pressure columns in the planner view. Oddly that fails :-(
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now the gases for which we have cylinders are offered in the gas selection
list and correctly recognized and added for the plan.
Still tons of work to be done to make this work the way it is designed,
but we are getting closer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This caused us to get royally confused when manually adding a dive and
trying to set the location through the marble widget.
Fixes # 229
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is in preparation of using those to define the gases available for
planning.
Right now this doesn't seem to work quite right - I don't get the
auto-completions for the cylinders that I was hoping for...
This commit also corrects the tooltip for addint dive data points.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is intended to allow the user to provide the gases / cylinders that
she will be diving with. With that information the planner can warn the
user about insufficient gases, but more importantly it can show relevant
gases in the gas select drop down.
Right now the add cylinder button doesn't add a cylinder - that's a
problem.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Insert the dive data point at 0,0 manually at the beginning of the plan.
Now everything should work. We still can't edit a plan created like this,
but at least we can once again plan things.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So in case the OK button was relabeled to 'Retry', relabel it back to OK.
Also, 'Retry' should be capitalized.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The user could add a dive, and in the middle click on the 'plan'
button. Since we didn't cared about that on the widget, a lot of
inconsistencies could occour. this fixes that by setting a flag
on the Planner, that has now three modes: nothing, plan and add.
(maybe in the future an edit mode will be valid too.)
If in 'NOTHING' mode, user can enter the addition, edition and
planning. If in any other mode, user can't do a thing. The mode
gets back to NOTHING when user accepts or cancels a plan / add
/ edition.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Garbage was left behind when canceling edit dive, and thus when the user
set his dive to be editted, after a first canceled edition, all points of
the first edition got messed up and showing on the second dive too. if the
user clicked 'ok', he got a really bad surprise.
Fixes#226
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch saves and restores the state of the TreeView after the user
clicks on another columns that will make the tree disappear. All of the
branche states are saved, this way the expanded nodes will be restored
when the user gets back to tree mode.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a try: when the user changes the orientation on the columns
by clicking on the title of them and organizing by something that's
not the number, we lost track of the opened branches. this commit
doesn't fix that, but it fixes a possible similar issue.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
I got a bit lost trying to find the code that handled DiveList columns
today, so I thought it was better to move it to its file, after all we
do have a divelistview.h :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This just proves one point: I'm retarded.
I moved some code around and forgot to close the old group, so I created a
group inside 'MainWindow' that handled the ListWidget, wich was not the
right thing to do at all.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I basically rewrote the way we handled the splitters. It now uses a state
to know what it's doing, and will only update the value of the
saved-to-disk splitter size if the state shows the splitters (currently
only VIEWALL), where all the other states should hide the splitters, and
the values of the splitters don't matter.
Fixes#225
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code had quite a few odd special cases that may have been left-overs
from the old Gtk algorithm. With this the gas is actually in the dive plan
node where it's use starts. And we maintain the gas correctly between
multiple edit sessions.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to make sure that the correct segment has the correct gas assigned
to it - and that those gases are correctly tracked when editing a manually
added dive as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Because of rounding issues we need to use our macro to test for air
(especially since the events store gas percentages and not gas permille).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the model name is written into the XML file it has to be a literal
string that isn't translated. Otherwise a datafile written in one locale
behaves differently when opened by Subsurface under a different locale.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When dealing with autocompletion, tag usually means "take this, move on".
In the tag widget the tab was added to the tag itself (and then stripped
when the input line was processed). Not exactly useful.
This feels a bit "hackish", but it seems to get the job done.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On equipment tab, when editing a cell and then clicking on cancel button,
it would delete all the cylinders table. Now it performs the original
behaviour of recovering the original value of the cell and don't delete
the table.
Signed-off-by: exhora <exhora.tat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also hide ui.CoordinatedLabel when editing a trip,
since ui.coordinates is hidden.
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I still wonder if we have all the semantics correct for multi dive
editing. This will need more testing.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When merging dives, the indices of the following dives change - so we need
to adjust the variable used in the for_each loop.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A call to DiveListView::reload always reset our sortcolumn to be 0.
Instead we are tracking the correct sort column and sort direction.
This also removes an obsolete private member that was unused.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The TagWidget behaves now similiar to a QLineEdit.
Pressing Enter/Return will now close the completion widget.
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
A custom tag widget has been added to MainTab.
Tags are seperated by a comma ",". The implementation
supports escaping a comma by using "\,".
While typing, the widget supports the user by suggesting
tags using a QCompleter.
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
This enables undo for the edit mode on added dives, it uses the
premade backup to fill the old dive with data. :)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Changed the backup implementation of the samples on EditDive,
it's way cleaner now what's happening, and it's also better for
the cancel edit.
Next: The Cancel Edit.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
This patch enables editing a dive that was manually entered,
it doesn't cover dive plans yet because on the plan I need to
figure out what are the 'user-entered' points, and what are
the algorithm point. and I feel lazy. =p
One last thing that's missing is to revert the dive to the
previous condition if the user cancels the edition, currently
canceling and applying ok is the same thing.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Added a new option to edit the dive in the profile view. The option
will only be visible if the dive was manually entered or if the dive
is a plan.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
We cannot use tr("").toLocal8bit().constData(); on a function
that expects a char* because the object will be deleted on the
next line, so a strdup is necessary.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
This adds alt-f shortcut to access file menu as well as other similar
alt based shortcuts for other menu items.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The setupSplitters method was created quite a while ago
to deal with the splitters when I didn't used a more sane
approach. I forgot to delete it back them, removing now.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch does the hooking up to show the dialog of the
divelogs.de window when the user selects it on the menu.:
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch moves around a few items on the menu to a new submenu
downloads/uploads. I think it's not the best way, but it already
fives a bit more of 'unverbosity', because the old menu had
'Download from Dive Computer', 'Download from Webservices', and
now we would introduce a new 'Download from Divelogs.de'
I tougth it was better to have a 'parent' named 'Download' and
put all children inside. this can grow quite big as soon as I implement
the plugin system for that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added the skeleton code for the Download / Upload from Divelogs.
de webservice. Now I need to hoopup things from the .ui side and
do the actual implementation of the code.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The setting was 'webservice', but this is too wide, since we are
supporting more than one. changed it to 'subsurface_webservice_uid'
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Created a WebService dialog that will handle download and upload
from all child based webservices. Also, ported the currently - only
- one webservice to use the new dialog.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Implement exporting in UDDF format as was done in Gtk version. File menu
exports all the dives, right click on selection exports the selected
ones.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's not written purely in C anymore. There's quite a lot of C++ now,
not to mention Perl, XSLT, shell scripting, etc. :-)
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The popup menu entries should be all lowercase.
Also we should handle this the same as regular save and open when it comes
to remembering the last path.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds the 'Save As' option on the dive list,
very straigth forward, just simple and beauty.
tested and working.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This tracks the autogroup state remembered in data files. Toggling the
checkable menu item causes the divelist to be marked as changed. This
might actually be untrue - but that's really hard to track so this is the
"better safe than sorry" approach.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Marble had a bug on the way it treats zoom level, there's
no way for it to find out if it's user-input or algorithm input
and when a user clicks on a dive, it spins and centers on it,
but if the user clicks on another dive when it's still spinning,
it will get the zoom in the actual state ( spinning, usually zoom
is far away from the first position ) and continue the spin to the
other position.
This patch works by saving the first location and triggering a
helper function with a timer that will only update the zoom level
if the timer is not active ( and thus, will not get the bugged
zoom state set by the animation. ).
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is really nice to have when looking at specific parts of a dive.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
divelist.c:
get_dive_date_string()
get_short_dive_date_string()
get_trip_date_string()
MinGW support for *printf and parameter positions (e.g. %1$d)
is horribly broken. Instead of implementing *proper* support
for this feature Microsoft decide to ignore the standard (again)
and they implement new functions with the '_p' suffix,
such as 'sprintf_p', which seem to be available from a 2003 runtime.
To top that 'sprintf_p' is not really a 'sprintf' but rather
a 'snprintf'.
It seems that the MinGW people ignore the issue and do not provide
wrappers of any sort, or at least for the current recommended compiler
for Qt 4.8.5 on Windows - which is a 4.4.0. A note of warning;
inspecting how MinGW does certain things in headers such as stdio.h,
can ensue bad dreams or other negative effects on to the viewer.
This forces us to move the following functions from the 'back-end'
(divelist.c) to the 'front-end' (qt-gui.cpp) and use QString.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch implements GUI for importing CSV log files. One is able to
configure what columns contain time, depth and temperature fields.
Pre-configured log applications currently included are ADP log viewer
and XP5. (Both of these use actually tab as separator, so the field
separator currently hard-coded.)
[Dirk Hohndel: minor fixes]
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Going through pixmaps for the profile was not needed and was making our prints
look very pixelated.
In Qt4, QWidget child classes are printed as bitmaps. So appart from
changing the code to print the tables to use a QGraphicsView instead,
there is nothing we can do, so the rest of the printing is still done as bitmaps.
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Apparently qmake can't tell that #include "version.h" and #include
"libdivecomputer/version.h" are not the same thing. Instead of spending
another bunch of hours on fixing the buildsystem I decided to just cleanup
the spots where we actually use the version file and rename it to
ssrf-version.h.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch restores the ability to move the info-overlay panel on the
profile. For some reason the eventFilter wasn't working (and actually,
looking at the code, it really shouldn't, because I didn't see where I set
it to work, maybe someone (me) broke it a long time ago) well, it seems
fixed now at least. :)
Tested on XFCE, Gnome and KDE, with three different window managers.
[Dirk Hohndel: removed debug output]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add units to the SAC in the print-out, reduce max depth in metric to one
decimal place, and leave some more characters of the notes to be printed..
Signed-off-by: Robert C. Helling <helling@atdotde.de
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Don't do "obvious cleanups" at 4 in the morning when you can't sleep because
of emotionally draining issues outside of your control... and if you do,
at least compile test them.
This was introduced by me in commit 2f9f46cb0253 ("Random white space
cleanup").
Sorry.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This Patch fixes the tab behavior on the QComboBox
delegate. For a QComboBox, tab was being treated as
'cancel' action on edit, but since it will send a
editingFinished() signal, and the Qt::Key_Return
will also send a editingFinished() signal, I couldn't
use that method and had to do a little hack around it.
The code is mostly clean and works.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Function is redundant as we should only render the profile
with a custom color table.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make the active font (fnt) use the 'size' member of the received
text_render_options_t. This allows changing the size of
certain text elements.
For the moment most text elements are set to 12px.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Because of varying font (screen) DPI we use pixel sized fonts
when printing. Apparently 8px does not look that good on Windows
default fonts, but kinda OK on Linux. We compensate by
increasing the font size and table rows to 9px.
Also decrease the padding between the table and profile to 5px.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There was a report that the depth and time texts were small
and require more contrast on the B/W print. Use BLACK1 for these.
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Custom widget frame styles such as 'Sunken' and 'Raised' which seem to
varry between OS will be captured as well:
http://harmattan-dev.nokia.com/docs/library/html/qt4/qframe.html#Shape-enum
So instead we temporarily set the profile frame to QFrame::NoFrame and
then restore it to the previous value.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This enabled a file selection dialog for selecting default log file
under the preferences.
[Dirk Hohndel: added missing declaration to .h file]
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
entry->ndl is computed and therefore should not be used for showing
the DC's ceiling. That made the DC ceiling jump to 0m when the computed
celing was at 0.
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
CylinderModels::setDive() and WeightModel::setDive() have
potential to pass the 'last' argument to beginInsertRows() as
a negative number which triggers an assert that 'last' cannot
be smaller than 'first'.
Patch attempts to fix that by only calling beginInsertRows()
when there is at least one row to insert.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The end pressure was appearing in the column headed "O2"
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The dive planner always showed the depth in our internal units, ie
millimeter, in the sidebar that showed the plan points.
That made little sense in metric mode, and none at all in imperial. The
_graph_ showed things in meter and feet.
So make the DivePlannerPointsModel always convert things to and from the
user units.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There are other models ( Tree Models and Model Items
) that are not affected by this commits, this is
already a good cleanup but it can be extended
to also fix those two other possibilities.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Second model converted to be less boilerplated,
there are right now 7 models that will need to
be ported. each model can remove around 30 to 40
LOC, so this is not such a bigger improvement,
but it's an 'keeping an eye on the future'.
Also fixed a bug where the returned value was dummy.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The Model View system in Qt is *very* verbose, this is the
beginning of a series of patches that will concentrate
the boilerplate somewhere and reduce the amount of lines
and will also try to make the code cleaner and easyer to
understand,
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
I just went thru all of subsurface code removing
some whitespaces issues and trying to make the
code prettyer, I also removed a few QString issues.d
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
There's a C++ way for it. And, for some reason, it wasn't defined on my
MinGW build:
qt-ui/profilegraphics.cpp:1006:57: error: 'MAX' was not declared in this sscope
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Patch enables the 'Profile on top' / 'Notes on top'
functionality in the print options dialog.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
After selecting a dive or a series of dives, the "Stats" tab shows the
minimum, average and maximum stats for the selected dives. The "Depth"
section does not display the correct value for the maximum depth.
Signed-off-by: Benjamin Fogel <nystire@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- remove the build flags and libraries from the Makefile / Configure.mk
- remove the glib types (gboolean, gchar, gint64, gint)
- comment out / hack around gettext
- replace the glib file helper functions
- replace g_ascii_strtod
- replace g_build_filename
- use environment variables instead of g_get_home_dir() & g_get_user_name()
- comment out GPS string parsing (uses glib utf8 macros)
This needs massive cleanup, but it's a snapshot of what I have right now, in
case people want to look at it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a helper function to unify the calculation of the
weight display string, instead of having the same calculation
in two places in the code.
Signed-off-by: Benjamin Fogel <nystire@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes some unsane values that was being retrieved
by the ui-files on first time opening. it creates a basic layout
of the application using the current desktop size.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Some columns are a nice addition, but not a must have,
and thus are hidden-by-default, uncluttering the user interface.
This was discussed with a few designers before writting the code,
and also discussed with dirk on irc.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
"Weight" was misspelled "weigth" in several places in the code
and comments.
Signed-off-by: Benjamin Fogel <nystire@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Subsurface stores weight values in grams. When displaying lbs,
the dive list was not rounding the converted weights up, but
rather truncating the value at the decimal place. The equipment
list was rounding the converted weights up. This gave two
different displayed values for the same weight value.
Signed-off-by: Benjamin Fogel <nystire@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Those preferences removed ( basically the ones about visibility of
the List View of the Table ) are now managed by the Qt Settings
system, and thus there's no need to have them there. wich gave us
a pretty good cleanup.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Some people (free divers) are loving ft/s or m/s units for vertical speeds.
Now they can choose between /min or /s in the configuration (only Qt UI).
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For a new installation, subsurface will now start on fullscreen,
this fixes the bug where subsurface would start using the interface
file ( mainwindow.ui ) configured size, and that silly monster
always changes when editing something.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The first time the user loads subsurface, the default_filename
is not configured yet, but yet the software tries to load "",
sending an error message that this file doesn't exists.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Taiane Ramos <exhora.tat@gmail.com>
If we #include "qt-ui/ui_anything" from anywhere, the Makefile rules
will blow up.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When straight decoding the event, it failed to handle older
SAMPLE_EVENT_GASCHANGE(11), the ones without he-part correctly. This was
shown clearly when it printed the 21/35 in dives/test20.xml as air.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't use any of the Standard Library features or classes in
Subsurface, except for three uses of std::sort, for which I added the
necessary #include.
It's always a good idea to include directly the headers you want,
without relying on indirect inclusion
On my machine, the build time dropped from 16.96s to 13.38s or a 12%
improvement.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Still don't like the order dependency - but at least this seems to work
and correctly build after make confclean.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This means we don't have to new/delete them, which is a waste of
overhead.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This means we can also remove the forward declarations.
This is the first step in removing the memory allocation for the ui
sub-classes. Without the second step, this commit is just making the
compilation time increase for no good reason :-)
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
PrintLayout::printTable():
- hide the QTableView widget border using a stylesheet
- add a guard to fix the last column extending post the page width
due to rounding
- use 1 extra pixel instead of 2 when grabbing the page region
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a couple of classes and some other modifications
in PrintLayout that handle the printing of tables under a profile.
models.h : ProfilePrintModel
The class uses a 'struct *dive' to output all required data
for a certain dive at specific rows and columns. It also handles
font formatting and text alignment.
modeldelagatates.h : ProfilePrintDelegate
The class is used only for drawing a custom grid for profile tables.
PrintLayout::createProfileTable()
The function is used to create and setup the profile table object
PrintLayout::printProfileDives()
The function now has correct padding of dive profiles on a page
and also the printing of actual tables below them.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adding +30 (seconds) to the position works fine for long dives but
when zoomed in on short dives, 30 seconds are a lot.
This commit sets the offset to +10 px regardless of the scaling.
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
The toolbar adds two buttons to the profile.
The user can now toggle the scaling (zoomed to dive/round up to 30 mins)
and adding /removing ruler to/from the profile using this toolbar.
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
This patch adds a ruler QGraphicsItem which can be dragged
along the profile. The ruler displays minimum, maximum and
average for depth and speed (ascent/descent rate). Also, all used
gas will be displayed.
This also adds a new attribute to struct plot_data to store the
speed (not just as velocity_t).
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
printlayout.cpp(h):
This patch cleans some test code and adds the function
printProfileDives() that accepts a number of dives
per rows and columns. It can technically fit any number
of dives on a page given the page size allows it. Both
landscape and portrait layouts are supported.
It now replaces the old methods:
printTwoDives()
printSixDives()
Space is reserved for data tables that will be placed
bellow profiles on a later stage.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The Gtk+ style on the Gnome shell is somewhat broken on Qt for
some reason. This hack pokes the system, checks if it's running
gnome-shell, and if the current style is gtk+ ( I couldn't just
check for gtk+ since it worked on XFCE and other Gtk based enviro
ments. so a double check is needed. ) then I changed the Pallete
of the affected widgets by hand.
not a pretty hack but worked.
[Dirk Hohndel: redid the patch to be simpler and more consistent]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fix the positioning of the `add` button when on Gtk style,
in my XFCE install (and thus, may differ a bit from the
Gnome3 one ) the Plus button to add cylinders and weigths
got really strange placements, this seems to fix this,
I also tested on Oxygen and nothing broke there.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch fixes the cylinders and weigth edition
by keypress. I don`t know when I broke this and linus found,
most probably when I added the code for showing the
cylinder size and working press while moving the mouse
around the list - sorry guys.
So, now this *seems* fixed, tested for a fairly good
amount of time and everything seemed ok.
I was unable to reproduce the behavior that linus got
on two value overlapped on each other, tougth.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch fixes the display of subsurface in smaller
screens by creating ScrollArea containers that are
now englobbing each of the Tab-pages and the Planner
Widget. Some of those widgets were pretty big by the
amount of things on it and it was too big for small
( 14" and 15" ) screens.
This seems to fix it, and looks good both on Gtk+ and
Oxygen styles.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This is much better looking in the Oxygen style, and
on the other styles it looks like crap - so let`s not
use that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch eliminates 18px offset from the MainWindow main
layout, making the window feel less spacy. Good on the Gtk+
style, but seems to also make a good work on the Oxygen one.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Fix some stuff concerning the pretyness of subsurface while running
on Gnome and XFCE enviroments. This is the kind of stuff that I
really didn`t want to put on the code but sometimes it`s for the
best. this makes the MainTab much more bearable. There are still
things to fix, like the size and positioning of some of the icons.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch removes the magic indexes used to control the mainwindow
display of the profile and planner by an enum. a bit more verbose
but hard to miss.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Since the cylinders and weigths have other data attached
to it, like size and working pressure, one could mess the
other data and want it to revert to the cylinder / weigth
defaults, but for that the user had to choose another
item, then go back to the previous one, so the cache would
be clean.
This patch fixes that by reverting the values to the
it fixes linus bug n2, where he had invalid data
on the other fields and had to go back and forth for it
to be fixed.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
So, the ComboBox is a beast, and when used on a Delegate
it's very hard to get things right, wich is a pitty, because
I overly like qt. So:
1 - Combobox needs to show the popup when user press ↓ and ↑ keys
2 - Combobox needs to select when user press enter, not twice.
3 - Combobox neesds to select when user selects from the mouse, not
pressing enter after.
4 - Combobox needs to not mess with stuff when moving around.
Everything that I listed there works on a non-delegate combobox,
but for some reason, a delegate missed those, so I reimplemented
all. not nice, but now we have a code that will work, I hope.
*fingers crossed*
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This code hooks the plus button on both cylinders and
weigthsystem tables to trigger the enableEdition() and
thus the work done when you click on + will be saved /
discarted when the user cancels the plan or accepts it.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This bit of magic actually performs the save on the
dive list for the changed weigths and cylinders,
it will set the cylinders only if there's a change
on the cylinder model, and it will set the weight
only if there's a change in the weigth model.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The old code marked the dive list as changed on any
of the changes in the model, this was incorrect since
the user could just cancel the edition, wich means
that the divelist shouldn't be marked as changed at all.
when the user clicks on'accept', and the item is indeed
changed on the dive list, then we mark_divelist_changed
to TRUE
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added a 'changed' member on Cylinders and weigth models to mark when
one was changed or not. Only the changed data should be inserted on
the selected dives, so if the user changes the cylinders on a multi
edit, there's no need ( and it will actually break things if we did that )
set the weigths too.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch enables edition on the selected dives as soon
the user press delete or any other column on the Cylinder
/ weigthsystem.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch enables canceling the edition of cylinders and weigth
systems, as soon as the user press cancel, the old values are
re-populated on all selected entries.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This creates a placeholder for the equipment edition,
it will ease the 'revert' and 'apply' when editing
multi dives.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
One more corner case that we cover correctly.
Reported-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of getting data from Qt just use our internal notion of the number
of selected dive to decide if more than one dive is selected (and
therefore if we need to show the 'merge dives' option in the context
menu).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is fairly straight forward. What I dislike is the check for the magic
number of "14 indeces". I'm sure there's a better way to tell if more than
one dive is selected...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
plot_data.o2 and plot_data.he was wrong for all dives, due to that
cylinderindex was set right first in populate_pressure_information, and
thus those two contained bogus information.
This makes the plot-text use cylinderindex-lookup as everything else.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Things need to be cleared out and disabled. But fixing this bug leaves
another issue - while the newly selected dive after a delete acts as if it
was selected, it doesn't show up as selected in the dive list.
Reported-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was not as hard as I assumed it would be. I may still change the
horizontal dimension to be the more logical seconds instead of minutes,
but for now this achieves the main goal.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I always disliked the fact that when you moved the handlers around you
could just 'run over' the neighbors. This also (as a somewhat intended
side effect) prevents vertical descents and ascents).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I'm sure there are more issues like this where we need to handle things
differently depending on whether we are planning a dive or adding a dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This solves the odd case when closing the data file that clicking in the
info widget caused the input fields to respond and the little warning icon
to show up.
Also some minor whitespace cleanup for readability.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This mostly happens with no XML file or when closing the current XML file.
Sadly the user still can click on the empty date field (even if nothing
else is active on the screen) and a date reappears.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Only look up the dive number of a previous dive if there is a previous
dive.
Reported-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the close action is triggered while there is no current dive (empty
history), the info widget is enabled. To avoid this behavior, we only
enable the info widget during update if the dive index is valid.
Signed-off-by: Alexandre Dupas <alexandre.dupas@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add two more rows to the widget - this is getting quite busy.
There still is some weirdness where the focus isn't returned where it
should be and a few other details, but overall getting there.
Added helper functions to parse a temperature and to deal with the
timezone offset - with that latter one I also fixed the time offset bug in
the planner.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is much friendlier than just showing an empty profile. I picked a
nice and simple three level dive. 25 minutes at 18m, 15 minutes at 9m, and
a safety stop.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If this is the last dive and if the previous dive had a number, give this
dive the next number.
Of course there are a couple of issues with the current implementation. We
have no way of changing the date / time of the added dive, so we KNOW that
it will be the last one. But I put that check there so that once we add
the ability to change the date / time (and hopefully remember to then move
the dive to the correct spot in the dive_table), we only assign a number
if it is the last dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was surprisingly easy - which of course has me worried that I'm
missing something that I should do when cancelling out of this dialog.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This gets things mostly right.
It creates a dive and uses the planner widget to create samples which are
copied into the dive. It fills in some reasonable defaults (DC model,
timestamp), but doesn't allow editing the timestamp (or the temperatures
and air pressure).
On accept the planner gets reset and the dive appears correctly in the
dive list.
Cancel still needs to be handled.
And I bet there are many subtle bugs lurking here and there. But it's a
start.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Reset coordinates properly when clicking undo.
When auto-completing location, only copy coordinates if they have not
been manually edited.
Set the background to red if the gps coordinates won't change, e.g.
there is a parse error, the change is too small or only whitespace
changes.
Signed-off-by: Michael Andreen <harv@ruin.nu>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make the planner update its display continuously upon moving points
including deco. This appears fast enough on typical PCs. If this ends up
being to slow on some systems we may have to make it configurable.
[Dirk Hohndel: cleaned up the two patches and turned into one commit]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This looks like it might work, but since we keep recreating the dive, the
info entered in the info pane is actually lost. But it's a step in the
right direction.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In add dive mode simply bring the diver safely back to the surface
(currently with a fixed ascent rate of 30ft/min (or 9m/min)).
We should make that rate configurable (for the planner as well as the dive
add function). Also, the dive add function should offer to automatically
include a safety stop.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Right now this is just calling the same code and setting a flag whether we
are planning or adding a dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the Message and the ok/cancel buttons on the Equipment
Tab, they don't control the Equipment edition yet, but already
does the same as the Notes one, Now I need to merge the other
part - the actuall Equipment Edition.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Adds a Warning icon on the changed tabs, this is important as
usability, for you could change something on the 'notes' tab,
change the tab and did't realized that something was changed
( by forgotting or something ), then clicking on the cancel
button. so now there's a friendly reminder that you actually
changed something.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Some cleanup was needed in the MainTab code for ages,
now the Edition / Cancel / Ok of the Notes tab is
way more intuitive on the code level.
This is needed to support multidive edition on the
Cylinders and Weigths too, since it's a bit more
complicated, I didn't want to start with a Spaguetti
Code.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Equipment tab was opened by default, it should be DiveNotes
as per the old GTK version. this fixes that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This is really nice to have when looking at specific coutures of a dive
or events.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fixes a crash in the current Qt subsurface code that can happen
after downloading dives from a dive computer, and the new dives merge
with old dives, causing the old dives to be re-allocated into the
merged one.
In that case, the list widgets don't get fully updated, and contain
stale pointers to old dives that no longer exists. Doing anything that
refreshes the display will hide this problem, and you do need to have
multiple dive computers on the same dive to trigger it in the first
place, so it's reasonably hard to hit, but very annoying when you do.
This patch just makes us reload all the dive UI tables, which may be
overkill. It also doesn't actually fix the fact that we seem to do
"process_dives()" within the context of the downloader thread, which
looks like a possible source of races. The "process_dives()" should
also be moved to the main thread, but needs the preferDownloaded()
information that is part of the download window, so it doesn't fit
here. Somebody else (Tomaz?) will hopefully fix that part.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Coordinates are copied when auto-completing location, they are also
displayed and editable in maintab.
Signed-off-by: Michael Andreen <harv@ruin.nu>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Due to a bug in how the entry-list was handled, a point on the polygon
was introduced at 0,0 that made a weird pink triangle across the whole
profile. This was quite clearly seen in dives/test15.xml
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This almost fixes it, but the offset from UTC isn't calculated correctly
it seems. Committing and hoping that a Qt expert can help.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Plotted the Scale on the Ruler in the planner.
There's a tiny bit issue - mostly noticiable while resizing,
but it's not a killer.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The Planner should be 'almost' like the profile, with the possibility
to use the mouse and keyboard to input a new plan, so this is a bit
of 'getting there.' I don't like too much code duplication but since
the current Profile Graphics is a crude cut-and-paste from the old
Cairo backend, it's easyer to start from scratch and have it well
organized as Qt code.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Ok on the planner now correctly creates a dive,
a few remarks, tougth:
1 - the number of the added dive is always 0
( but I may be testing it wrong )
2 - the information pane is working only when
the mouse is clicked, this is a regression and
it will be fixed. ;)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The dive plan was bein created on the Profile, this
While this worked out, it created a bit of spaggethi
code, so now the model will take control of *everything*
on the planner.
I tested it quite a bit and doesn't seems to have appeared
a regression, wich is good.
Now that a dive plan is bein created, I can just save it. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Plug the cancel action on the dive planner ( before that, only by
hitting the 'ESC' button things worked, so now you can also click
on the Cancel box that's on the right of the planner profile window.
Also, the beginning of the 'ok' code is also at place.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Position the X and Y labels of the rulers, this way
it's a bit more clear the deepness and the length
of the trip. It's still not the best approach, but
I'm getting close.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
When updating the weight system model we have to remove the old ones and
then correctly count the new ones.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is correct C. But debuggers in C++ mode are broken and can't display
the global variables. While I hate having to do this change, I hate not
being able to debug my software because of broken tools even more.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code to initialize the weight systems from the last datafile loaded
had not been brought over from the Gtk version.
We now correctly update the data structure when loading file (but not yet
when editing values).
Most likely the same needs to be done for the tanks as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* Removes the InterfaceThread
which is basically an unecessary proxy between the MainThread and
the DownloadThread.
* Use a state machine to control the DownloadWidget UI logic.
Signed-off-by: Danilo Cesar Lemes de Paula <danilo.eu@gmail.com>
Clicking on the plus button now adds a new stop on the planner.
The depth is always 10m and the time is 10 minutes after the
last stop. can be changed by double clicking or dragging the
balls around the canvas.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signal that the model changed when editing plan specific information,
when you changes the ATM pressure or any other information, the
graphic of the plan will be generated again to mirror your actual dive.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Plug most of the dive planner controls that weren't
plugged yet - StartTime, ATMPressure, BottomSAC,
DecoStopSAC, LowGF and highGF are being used by
the calculations now.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Enabled the CC SetPoint settings on the table, changing
it will automatically reflect the canvas. Also fixed a bug
that prevented the 'Air' handling on the diveplanner
table to show the list of options using arrow up and down.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The Command line execution of Subsurface happened before the
GUI was created, this leaded to various bugs by me(tm) over
time. This patch seems to fix all of those, by reusing the
same code for GUI interaction and CommandLine interaction.
I had to rework how the main.c worked, it used to be C code
calling C++ code, and this is non desirable, since C doesn't
really understand C++.
I Moved all of C-related code to 'subsurfacestartup.c/h' and
created a tiny wrapper to call it, so all of the C code is still
C code, and the new main.cpp calls the mainwindow->loadFiles and
mainWindow->importFiles to get rid of the bugs that happened before.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Fixed a incorrect signal-connection call that should'nt
be there anymore because the TableView now correctly
knows what to do with models.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Merged the shared code for the three table views into
one code, this way less code is needed if we need to
construct another tableview in the future.
I still need to clean some of the models too.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Fixed showing the profile and info window when opening
the program. For some reason ( easy testing of the planner )
the planner was being opened instead of the profile and
info window. now everything's back to normal.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
"weight" was spelled as "weigth" in a few places in the code, but
more importantly, it was misspelled in the preferences dialog.
A minor nit-pick, maybe, but it still drew the eye in the dialog
and looked weird.
Signed-off-by: Benjamin Fogel <benjaminfogel@yahoo.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code now seems to be mostly working. There is unfortunately
a QAction shortcut conflict between the implementation and the
MainWindow. - I'm gonna fix that in the next commit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The plus sign for time was in a very strange position,
this puts it back to where it belongs, plus a bit of
code cleanup since the planner was in heavily modifications,
this will be needed quite a bit. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Now the planner deletes points by clicking on the
trash icon on the table. The dive planner is almost
finished. <3
next: add a point from the table.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Deletes the logic of divepoints to the model, this
makes automatic updates on the table on deletions.
( remember, to select dive points, ctrl+click on it.
) if you want to delete it, press 'delete', it will
be removed from the graphics part and also from the
table.
Next: delete point by clicking on the table trash-
icon.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The gas choice now works and correctly ( I hope ) calculates
the gas choosen to show on the planner. User can choose the
gas from the list on the visual planner, and also on the table.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added support for changing depth and time on the table.
It now works both ways, one can edit the planner via the
table for a fine tuning. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This commit is the start of the Editable Model work
for the planner, it creates a new delegate and shares
the code for the model that creates the gas types, so
we only need to change in one place to add new gases.
The table is already edition-enabled, but the outcome
is still undone, next commit - put all together.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The DownloadDialog behavior was broken in a way it allows the user
to make changes on the dialog while the download is happening.
Also, clicking on "Cancel" breaks/hangs the UI sometimes, as libdivingcomputer
doesn't always cancels the download right away. That's a bug that
still needs to be fixed.
Signed-off-by: Danilo Cesar Lemes de Paula <danilo.eu@gmail.com>
Made the tableviews share a bit of code, and code cleanup.
The tableviews for Cylinders, Weigth and Dive Planner Points
now shares the CSS and I also implemented the save / load
methods for the dive planner points, so the functionality
is mostly done on the vieualization side. - since we are
now using three tables maybe it's a better idea to create
one class SubSurfaceTable that knows how to handle saving
/ loading of the columns... TODO for the future. ;)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added a 'remove' icon on the dive planner table,
this makes the ui more consistent between the other
tables that also manages addition and removal of data.
the delete method is still unimplemented.
next - css.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Fixed moving a dive point between dive points.
this fixes mostly everything that I have broked
by using a Qt Model instead of a linked list -
but a model is better to make everything updated
and only poke in one place. sharing code++. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Made possible to add a divepoint between two others,
this also implemented the last patch in the correct way.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Fixed entering a dive stop before another dive stop,
the correct way is to fix the position of them but
this is easyer - I'll update the correct one in
a couple of patches.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The values of the dive points on the tableview were
too big, I'm now dividing time by 60 and depth by 1000
to get the correct results.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Fixed a bug where moving a handler would mess the planner
by calculating invalid values to the planner on the model
side.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Moved a lot of code that handled the positioning of the
DiveHandles on the interface to the model. there are a
few bugs left ( regressions ) that I will fix in the
next commits. With this commit an edition of the points
on the widget will trigger a repaint of the planner profile.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Moving the handler on the graphics updates the model on the planner
Unfortunately, the graphics will move back to it's original
position because of the legacy code used to calculate the
dive plan. Next: fix the legacy code used to calculate the dive plan.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Moved the creation of the data plan point to the model,
this way when the user creates a data point on the
graphical planner, or when the user creates the point
on the QWidget based view, both of them will be updated.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This implementation of the shared model already shares
some, but not all data between the two views, but it's
already a huge improvement. When the user clicks on the
visual planner, it will update the view on the qt-widget
based view. The editing of the view is still not allowed,
and removing nodes is not allowed too ( yet. )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Started the model to handle the divepoints between the
Qt Widget interface and the QGraphicsView one. good thing
is that we share code. Bad is that a model is harder to
work, but doable. :)
With this finished ( in a couple of commits ) one can
insert a point on the Qt widget or on the graphics view
and it will be 'mirrored' to both interfaces.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Changed the Window Hint of the planner popup to 'Popup'
this removes ghost items from the task bar.
Hint By: Danilo Cesar
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Removed a bunch of non-used graphics buttons,
since the new widget now contains everything
needed for the creation / cancelation of the
dive plan.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added a new widget to control the DivePlanner, now we
have two widgets, a graphics one and a qt sidget based one.
the Technical divers will most likely use the QtWidget one
while the hobbists will most likely use the QGraphicsView
one. there's not a option to choose one, they both will
appear at the same time.
Next step: make the screens to work.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Before this commit this dialog had a weird behavior in which
when it was shown, the whole screen was still active. In case of a
alt+tab, this dialog is sent to behind the application window, but still
visible in the task bar.
This commit basically changes this behavior to a regular pop-up.
Signed-off-by: Danilo Cesar Lemes de Paula <danilo.cesar@collabora.co.uk>
Looks like the QTextBrowser can't render the manual correctly.
Also, QWebView provides a better way to find contents on a webpage,
which is an important feature for an user manual (to be implemented).
Signed-off-by: Danilo Cesar Lemes de Paula <danilo.eu@gmail.com>
This is a bit of code cleanup that I'm not sure that will
pass, since it's all macro-based, but I don't have a thing
against macros at all. Sometimes they helps us keep a better
and cleaner code base. I think I managed to remove around 120
lines of code, wich isn't much, but I replaced it by 14. and the
code is now easyer to maintain, so hooray.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Change the background color of edited parts of the dive
on the interface. Specially util if you are editing multi
dives in a single step, and went to eat something or did
anything else for five minutes, then come back and don't
quite remember what did you changed. now it's in a cute
yellowish background.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch enables multi dive editing on the selected
dives. It's a bit of big patch where I reworked how it
worked since it was written just for a single dive.
this means that this can introduce bugs - I'v tested it
quite a bit but a thing could slip thru my fingers. :)
How this is supposed to work:
Select a few dives that you want ( one or more ) then
click on the field that you wanna edit / multi edit, and
press 'accept'. *only* the edited field will be modified
thru all dives.
Next patch - I'll change the bg color of the edited fields.A
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch fixes a thing that I run into when trying to implement
the multi-edition system. Whenever a dive was selected, via mouse
or keyboard, it had two stages: first, it would select the previous
and the current ( and thus, render the profile of the current) and
then whould release the previous and select the current again ( and
thus, rerendering the profile again, plus a few other things. )
With the multi-edition system this caused a more severe bug, since
the edition of the dives is directly applied as soon as the text fields
changes, as soon as we selected any dive on the list, the 'before' dive
would be modified by the 'current'. This patch fixes this - but since it's
just a 'code removal' patch, this can led to bad things in the future,
I tested it quite a bit, but didn't found anything, no regression.
*fingers crossed.*
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Fixed a bug where the auto-completion would not work via command
line, I fixed it by reloading the information of dives when a
dive file is open via command line or via UI.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added completion for buddy, divemaster, location and suit.
The completions uses some models that I created in the last
commit - everytime that a divelog file is loaded, it creates
a list of completion items.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added classes to handle the completion of dive editions, the
classes are BuddyCompletionModel, DiveMasterCompletionModel,
SuitCompletionModel and LocationCompletionModel, thanks to
plain old C macros, code got really small. and I hope the
logic is better than the Gtk version. :)
Now next step is to integrate it to the Ui. shouldn't be hard.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patches fixes showing back the labels 'Dive master' and 'Buddy'
after a trip selection was done, then back to single dive selection.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch makes the auto editon behave in a better way,
now you can scroll the notes widget without marking it as
editable, and also adds a bit of code cleanup, and a better
logic for editing the other widgets.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This bug manifested itself as too long deco obligation when moving
waypoints to later and then back to earlier times as all intermedite
versions were created as dives in the divelist (and the saturation of
these "previous dives" was taken into account.
It is not entirely clear to me how the dive will be permanently added to
the divelist once ok is pressed: One could in createDecoStops allocate
struct dive from the heap rather than from the stack and return a pointer
to it and which is then added to the dive list upon pressing ok.
[Dirk Hohndel: add include file to make this compile]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The current QTextDocument implementation is slow due to
HTML parsing. By using QTableView with QAbstractTableModel
we boost the performance of the table print drastically.
This patch completely replaces the old solution.
There is a hidden QTableView widget which is populated
with all data and rendered using a QPainter attached to
the printer device.
A couple of new classes are added in models.h/cpp
that handle the table print model and these are then used
in printlayout.h/cpp.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QObject::tr() has source string as first argument and disambiguation as
second argument. Currently the events shows "Starts with space!" instead
of " begin" or " end" after the event name.
Signed-off-by: Michael Andreen <harv@ruin.nu>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the tooltip text was used as key in the map, two events of the
same type, close to eachother, would cause one of them to not be
removed.
Since ToolTip::removeToolTip() isn't used, we don't need a QMap and can
use a QList instead, so all tooltips are properly cleared.
Signed-off-by: Michael Andreen <harv@ruin.nu>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the possibility to choose gases in the planner,
now the user should click on the name of the gas, a
popup window will appear, asking the user to choose
what gas he wants for that ascent / descent.
now we need to hook that up with the createDecoStops
method that calculates the decompression.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added the current gas used on the planner, now it's a matter
of choosing the new gas, that will be done in the next commit.e
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added a button and a method to reduce time on the dive
planner. The dive planner will not reduce below deco-time
and it will also not reduce below TIME_INITIAL_MAX.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added the code to reduce depth on the planner. Depth
cannot be lower than 40m and it also won't let the
user reduce if there's any point on the 'reduced' area.
the icon is ugly - we need an artist.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The Working Press didn't correctly updated when there was a 'bar'
or 'psi' in the string ( and that was defalt behaviour );
The o2 didn't correctly updated when there was a '%' on the string
(and that was default behaviour ),
The He didn't correctly updated when there was a '%' on the string,
and that was also default behavior.
Now all of them correctly updates.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This is a follow up commit to the previous one that
enabled cancel for cylinders, everything in the commit
log for the cylinders also applyes here.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Made the default 'Cancel' action correctly cancel
the cylinder edition. This is needed only because
we bypassed the default behavior on Qt that took
care of this, because we wanted to have more control
on how the view would update the items accordingly
with wich one of the cylinders were selected
on the edition pane - the pressure and size of the
cylinders needed to have it's data set, but the Qt
Model/View system *thinks* that cancel-edition is
simply 'do not commit the edition data, then.' wich
would not work with us, because we passed the strange
data already. So, I created a backup data that serves
us very well. When the user cancels, this backup data
is added back on the cylinder, making everything as
it was before.
[Dirk Hohndel: removed the inadvertendly added boost header]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds the getColor() helper function to
ProfileGraphicsView and EventItem so that retrieving
a certain color can depend on a 'isGrayscale' flag.
This flag is private and only set by
ProfileGraphicsView::setPrintMode() at this point.
EventItem also now accepts 'grayscale' as a constructor
argument.
A couple of side modifications are:
- move setBackgroundBrush() to ProfileGraphicsView::plot()
- set the same pen color as brush color for the dot in the
'!' symbol inside EventItem::EventItem().
TODO: look for color issues when printing using the
custom grayscale table
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
We pass the value of 'color_selected' stored in the
print options to ProfileGraphicsView::setPrintMode().
This way the profile can be printed in grayscale
internally instead of converting a QPixmap to
grayscale.
There are a couple of questions here:
1) Are all the 'if/then' checks for all individual
colors faster than the direct QPixmap/QImage grayscale
coversation.
2) The direct grayscale conversation does not give
control of individual colors, but can it look actually
better?
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
(experimental)
Add the method PrintLayout::convertPixmapToGrayscale()
to convert a rendered profile pixmap to grayscale.
It will probably be faster to have
ProfileGraphicsView render in grayscale under certain
conditions (and use a specific color table) instead -
e.g.:
ProfileGraphicsView::setPrintMode(bool printMode,
bool useGrayScale);
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
PrintLayout::printSixDives() goes trough all dives
and prints their profiles on full portrait pages.
This method is based on resizing the ProfileGraphicsView
widget, plotting each dive and then 'grabbing' it using
QPixmap::grabWidget().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
When printing the profile there are certain features which
we want different (or disabled). This includes font scale ignoring
and showing a toolip. To achieve that we check for a printMode flag
in ProfileGraphicsView which can be set using setPrintMode(bool).
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
There is a potential issue when placing a heading on a new
page. If the height of a data row is larger of that of
a heading, a new heading can end up at the bottom of a page
leaving that page with two headings.
To solve that we add line breaks (<br>) until the new
page is reached and add the heading there. Algorithm
assumes that the height of a heading is larger than
a line break. Also it is now obviously even slower.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
QTextDocument uses a separate painting device,
thus we need to pass our QPrinter instance which may
have a resolution different from the screen resolution.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Don't set the cylinders and weight types if they are
the same than before, this fixes a bad thing that happened
when playing with the values. it could blank out the values
carefully chosen by you.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This is a linus request, adds a Single-click edition
on the tableview to make it more consistent with the
rest of the interface where edition is permitted.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
So, I used the Qt Event Filter strategy to bypass the normal role
of user interaction, the Qt ComboBox needed 2 keypresses to close
and edit. so I grabbed the first one and send together a second one.
Há.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch fixes the combobox behavior on the inline edit
to what it was ( well, similar to ) the GTK version,
up and arrow keys will walk you to the list of choices,
and it will update the other data as soon as you walks over it
one drawback is that you cant ( for now, since I do have a
very big headache at the moment ) cancel, since the cancel
will just forgets the item and do not call 'setData' on the
model, but we already called it while walking on the list.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Adds spport for key_up and key_down in the combobox
delegates, now when you press key_up or down, it will
show the list of choices instead of going one-by-one
in the lineedit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This modifications makes the About dialog spacing more
consitent with different font sizes. Tested on
Ubuntu 12.04 with the 'Universal Access->Text size'
settings.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It might be a good practice to declare certain class
'helper' functions as constant members. But I don't
think there are performance benefits to that other
than the readability ones.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
We use the DiveItem struct from models.h so to ease the
display of date, depth and duration. All columns present
in the GTK build are now displayed.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Add this helper so that we can easily wrap the required
memory release after calling get_dive_date_string()
(fixes a small memory leak).
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Patch does:
- set individual column width and name
(held in tableColumnNames, tableColumnWidths)
- reduce font size in the table
- more small tweaks in the style sheet
TODO: finish printing all dive data
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
We don't really need includes of display.h and dive.h in
printoptions.h and printlayout.h or forward declartions
of 'struct dive' and 'struct options' in there.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
also includes:
- experiment with colored background for headings
- experiment with 'left' alignment for headings
('th' tag CSS does not support 'text-align')
- whitespace fixes
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Currently only for the table print, but now we use the
actual dive table to iterate trough all dives (find only
selected if needed) and print their 'number' element
in table rows.
Also improves the new-page detection algorithm slightly.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
PrintLayout for now only handles the table print,
while the data output itself is work in progress.
For now there is a simple HTML/CSS table logic based
on QTextDocument. There is an iterative algorithm
which listens for a page increase and adds a heading
on top of the new page.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Use a QPrintPreviewDialog, while the print logic is WIP.
This way Qt will show the print output in a window instead
of exporting to a file and opending it manualy.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The setup() method will be called each time to obtain the
current printer settings. Also it calculates required scalling
based on screen agains printer DPI.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
PrintLayout is a class that will handle the layouting part
of dive profiles, text, tables depending on the settings
of a QPrinter and the PrinterDialog and PrintOptions
instances.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
By connecting to slots we always modify values at a previously
set 'struct options' pointer.
Also have the setup of slots and pre-set values in a
separate setup(struct options *) function.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Tab order should begin from the topmost widget and then
descend towards the bottom end of the dialog.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The PrintOptions widget has value labels next to the
horizontal sliders. Add slots to update these labels
when a slider moves.
Patch also makes a modification so that the PrintOptions
constructor requires a 'struct options' pointer. If
an options struct is not received we do not set predefined
values and do not connect signals to slots, where
options will be updated immediately.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
- adds missing file printoptions.ui
- adds all controls present in the GTK version of the
print dialog custom tab
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
PrintOptions is a QWidget class to be used as an
addition to a future print dialog (possibly based on
QPrintDialog). Currently only contains a couple of
radio buttons.
PrintDialog (printdialog.cpp/h) which is a basic QDialog
is currently added for testing only and it holds
an instance of PrintOptions.
Calling File->Print opens this test dialog for now.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
While in zoomed mode and when resizing the splitters or
switching views the profile tooltip can end up being at the
wrong location and also the zoom state becomes corrupt,
so perhaps the entire transformation needs to be reset.
To prevent the bug we listen for relevent to the profile
splitter resize event, view changes and clear()/plot() the
entire profile graphics.
This is an slow/expensive solution and perhaps there are
cheaper alternatives e.g. updating only the scene rectangle
and tooltip, somehow.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove a couple of expand() calls(?). Also store the last
expanded rectangle size in the private variable nextRectangle
and use that in collapse() animation. Patch prevents a small
jump/resize glitch if the user quickly hovers over and out
of the profile while the tooltip is still resizing.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When collapsing the tooltip we want it's border to become
the same height as when no tooltip info was visible - i.e. post
creation.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So during my Maui trip, I had a short hiatus in diving, causing
subsurface to start a new trip for the last day of diving. I could have
just started the old gtk branch to fix it up, but decided that I might
as well try to implement the "merge trip" logic in the Qt branch instead.
This is the end result of that.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QGraphicsView::AnchorUnderMouse does not work for
Qt 4.8.1 on Ubuntu 12.04 and if the mouseMoveEvent
overload is disabled it practically can be seen that
the anchor point is [0, 0] instead of the mouse location.
After a suggestion found on the web this patch attempts
to use the hidden scroll bars to calculate reposition
on pan and zoom *near the mouse cursor.
On the other hand QAbstactSlider (QScrollBar) class
strangly uses negative offsets for minimum scroll
position, which makes the implementation even more
ugly.
[*near] because it's not that accurate!
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Makes it easier to see colored lines - e.g. velocity
with 20 levels of zoom.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The 'else if' condition in ProfileGraphicsView::wheelEvent()
is causing a zoom-in / zoom-out loop at zoomLevel = 10.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added a messageBox to warn the user that he quit with a working
plan, to reduce the risk of unwanted loss of work.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added the left / right shortcuts for moving the handlers around in time,
this also made me wonder why we have the 'previous dc' on the menu, it
got actually to broke my code on the shortcuts for the planner because
they are active everytime - should they be active only when the profile's
visible or they serve any other purpose?
If they serve only for the profile, I'll get them out of the menu and
put them in their proper place - the profile view.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added 'up' and 'down' keyboard actions on the dive planner,
you need to select the handlers with ctrl + click, then
press up to make the handler go 1m up, or down, to make the
handler go 1m down.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added a delete action from the keyboard, there's also
a possibility to add the same action from the menu, but
I frankly don't like much the idea. so, to delete a handler
now, you need to select it ( ctrl + click ) then press
the delete button. Multiple delection is also possible.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added a shortcut to the esc key, so it clears the selection,
if there's no selection, it acts just like clicking on the 'cancel'
button. Next: delete selected handlers.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Make possible to select an handler by ctrl+click on it,
this will be used in the future for the shortcut actions,
like delete, arrow keys, and such.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
So, it was on the docs, but I didn't read it before, if the
scene has items that ignores transformations, we need to
pass the view transform to the method that gets the items
in the scene. I also used IntersectsItemBoundingRect instead
of IntersectsItemsShape because it's faster, and our items
are small, so we don't need an very accurate but slower method.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Make it possible to drag a handle between handlers,
this way the configuration of the dive is more acurate
and easyer to make. I'v discovered a problem where it's
a bit hard to 'grab' the handler, investigating it now.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Make it possible to add a handler between others,
someone asked why I didn't make like this from the
beginning, the answer is that I wanted to have something
stable before messing a bit more with the planner, but
since the planer is almost-stable, I added. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Better positioning of buttons on the dive planner. The ok / cancel
buttons are in the correct place, and the '+' sign for time will not
overlap the time string anymore.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
To draw the white outline around profile text we trace a text path
using QPainterPath::addText() and then create a couple of
QGraphicsPathItem objects. One of the objects is outlined using
QPainterPathStroker and is placed at the bottom of a QGraphicsItemGroup
with a white brush. The other object holds the standard colored text
and is placed on top.
Notes:
- possibly quite expensive on older machines
- ProfileGraphicsView::plot_text() now returns a QGraphicsItemGroup
- QGraphicsSimpleTextItem uses a top-left baseline anchor
while QPainterPath::addText() uses a bottom-left baseline
which is a bit mysterious, requires the -3 offset for a match
and is possibly non-portable across fonts and sizes.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Makes the increase time button to work, it will
increase the minimum time, not the correct time of the
dive. the total time is calculated by the deco, and
does not come from this, unless the deco is smaller
than the minimum time.
This patch also fixes the problem where a button
would only click once - I was holding the first
clicked button as the 'mouse grabber', bad tomaz.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Make the increase depth button to work, it also adds
a 'safety' stop at 150m, I know that this is deep, and
maybe we need to adjust this to a better safety stop.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Removed the user-entered lines on the plan, keeping only deco,
This way the graph looks way prettier and we don't loose any
functionality.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Change the color of the DepthString based on it's deepness
on the profile planner. The new color of the profileString
( the string that follows the mouse stating how deep you are)
is now interpolated from SAMPLE_SHALLOW and SAMPLE_DEEP -
but since those two colors were the same and I had to change
it so that could work, I want somebody to check if my choose
of colors were ok.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Use the same profile colors on the planner for the Time and Depth
rulers. this needed a new method on the rulers - setColor, that
will call the setPen method and make everything behave properly.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The last tick to the rulers were missing, this was making
them to look odd, this make the rulers better looking,
but it caused the other-non-ported-yet-to-percent stuff
to behave in a not so good way, most visible one is the
handlers, gonna update them next.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Changed the ruler so that they work with percentages,
also added a new method to the rules to set the size of the
ticks.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added a method and a simple stub to position things on the canvas
using percentage - this way I have a proper control on where I want
to put things on screen and it will make simpler for future changes,
even if the amount of code written is a bit bigger.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Share the background for profile and planner. Those are not the same
class, but they should behave somwheat the same.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
