These adds some ifdef's around some debug functions to disable them when
not using them.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
last_pressure is updated a couple of lines later, so no need to do it
here.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
NDL and TTS doesn't show up in the printed profiles, and it takes
significant time to calculate, so just don't do it.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While playing with the ruler, I figured that it happened only once that
my minimum speed was not 0 for a segment long enough to get any display.
And it was a "dive" in an hyperbaric chamber...
This patch replaces the minimum speed with the maximum descent speed and
the maximum speed with the maximum ascent speed.
Signed-off-by: Alexandre Belloni <alexandre.belloni@piout.net>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Don't calculate pressure-track for depth above SURFACE_THRESHOLD,
because then we would guess that were actually at surface breathing.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use get_cylinder_index that handles SAMPLE_EVENT_GASCHANGE and
SAMPLE_EVENT_GASCHANGE2.
This also removes the need for a special case where get_gasidx returns
-1, because get_cylinder_index always returns the "closest" gas that it
finds.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the Gtk version there were no option to disable the showing of time
in the mouse over, so this removes that option to limit the amount of
clutter in the settings panel.
This also renames the time and temperature to match the names they used
to have. T -> @, Temp -> T
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When reordering the info overlay content to make it jump around less,
somehow the SAC data got printed twice.
[Dirk Hohndel: rewrote incorrect commit message]
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Store the calculated values in separate variables in the plot_data
struct, and display them separate. This makes sure we don't confuse the
calculated values with the ones from a dc, and now we can compare the
two.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Break the huge calculate_deco_information into three different functions.
One for the current deco calculations, one for the ndl/tts/deco stop and
one for the gas calculations.
This makes it easier to disable/enable different functionality.
This also gets rid if the ccrdive state variable, and keeps that state
in the plot_data struct. Now we calculate the deco before we calculate
the gas properties, so if we have a po2, we're in ccr-mode, and if we
don't, we're in oc mode.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When moving along the plot, it's hard to look at a certain value when its
place in the info box moves due to values being added or removed above it.
This commit moves the "stable" values up top in the info box and the
values that come and go further down, so that the box expands downwards.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This changes the special handling of ndl calculations when we deem that we
are too shallow for doing them. Previously we just set ndl to -1 and
printed a "-", now we return and print max_ndl, just as how most
divecomputers work.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Let the user choose if the calculation of ndl and tts is worth the time
it takes.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will fill out the gaps of temperature data between all the points
so we always have a temperature to show in the info box.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Ruler was hard-coded to use seconds as speed unit. This makes it use
get_vertical_speed_units to switch between seconds and minutes.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is really nice to have when looking at specific parts of a dive.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
D as in depth, T as in time and not another T as in temp.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This may seem like a really odd change - but with this change the Qt tools
can correctly parse the C files (and qt-gui.cpp) and get the context for
the translatable strings right.
It's not super-pretty (I'll admit that _("string literal") is much easier
on the eye than translate("gettextFromC", "string literal") ) but I think
this will be the price of success.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I am not removing this but leaving it around as this is useful for a
feature that we still need to enable - the ability to filter out which
events to display. This existed in 3.1 but is missing in the Qt version.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- remove the build flags and libraries from the Makefile / Configure.mk
- remove the glib types (gboolean, gchar, gint64, gint)
- comment out / hack around gettext
- replace the glib file helper functions
- replace g_ascii_strtod
- replace g_build_filename
- use environment variables instead of g_get_home_dir() & g_get_user_name()
- comment out GPS string parsing (uses glib utf8 macros)
This needs massive cleanup, but it's a snapshot of what I have right now, in
case people want to look at it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some people (free divers) are loving ft/s or m/s units for vertical speeds.
Now they can choose between /min or /s in the configuration (only Qt UI).
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I ran subsurface with valgrind and it found a few errors.
[Dirk Hohndel: split this out from a much bigger patch that is still under
review]
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There is debate on this one, as free divers WANT the xx/sec values.
This needs to become flexible depending on whether you are in freedive
mode or not.
Fixes#202
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a ruler QGraphicsItem which can be dragged
along the profile. The ruler displays minimum, maximum and
average for depth and speed (ascent/descent rate). Also, all used
gas will be displayed.
This also adds a new attribute to struct plot_data to store the
speed (not just as velocity_t).
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
plot_data.o2 and plot_data.he was wrong for all dives, due to that
cylinderindex was set right first in populate_pressure_information, and
thus those two contained bogus information.
This makes the plot-text use cylinderindex-lookup as everything else.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is really nice to have when looking at specific coutures of a dive
or events.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Old gasswitch events only contains O2, so don't look at he part when
the event doesn't contain a He part.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Calculate TTS and NDL, and Deco stops when they don't already exist in
the samle and show them in the mouse-over.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When seeing that you have 0 min left, it looks kinda wierd, so rather
round up instead of down.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In calculate_deco_information we compute the ppo2 so we can graph it,
but if we send that ppo2 on to add_segment it will just reverse the
computation and introduce errors.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a feature that had been requested a few times in the past and when
debugging my "show only used gases" commit I realized that this would have
been extremely useful to have...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I think that displaying tissue loadings either as pressure or as
percentages is not very intuitive but that it makes much more sense when
translated to ceiling depths.
This change enables just that for the 16 tissues in our calculated ceiling
and visualizes this in the profile graph.
There is a checkbox in the preferences to turn this on. If enabled, all
tissues having non-trivial ceilings are also shown in the info box.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
After the 3.1 release it is time to shift the focus on the Qt effort - and
the best way to do this is to merge the changes in the Qt branch into
master.
Linus was extremely nice and did a merge for me. I decided to do my own
merge instead (which by accident actually based on a different version of
the Qt branch) and then used his merge to double check what I was doing.
I resolved a few things differently but overall what we did was very much
the same (and I say this with pride since Linus is a professional git
merger)
Here's his merge commit message:
This is a rough and tumble merge of the Qt branch into 'master',
trying to sort out the conflicts as best as I could.
There were two major kinds of conflicts:
- the Makefile changes, in particular the split of the single
Makefile into Rules.mk and Configure.mk, along with the obvious Qt
build changes themselves.
Those changes conflicted with some of the updates done in mainline
wrt "release" targets and some helper macros ($(NAME) etc).
Resolved by largely taking the Qt branch versions, and then editing
in the most obvious parts of the Makefile updates from mainline.
NOTE! The script/get_version shell script was made to just fail
silently on not finding a git repository, which avoided having to
take some particularly ugly Makefile changes.
- Various random updates in mainline to support things like dive tags.
The conflicts were mainly to the gtk GUI parts, which obviously
looked different afterwards. I fixed things up to look like the
newer code, but since the gtk files themselves are actually dead in
the Qt branch, this is largely irrelevant.
NOTE! This does *NOT* introduce the equivalent Qt functionality.
The fields are there in the code now, but there's no Qt UI for the
whole dive tag stuff etc.
This seems to compile for me (although I have to force
"QMAKE=qmake-qt4" on f19), and results in a Linux binary that seems to
work, but it is otherwise largely untested.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The selected dive was being set to zero when the program
started, but zero is actually the first dive. There
were workarounds on the gtk code for that probably
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The value of 0 that we used is actually a valid value and could cause
confusion.
Suggested-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Align statistics tab labels as per infotab.
Amend helper function to show degree symbol for temp measurements.
Change order of member initialisation list to match order of decl
(ProfileGraphicsView::ProfileGraphicsView)
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Plot the numbers on the left of the profile.
It seems that everythign is being plotted -
But I can see that there are coordinate-errors on the
code. ( the GTK one plots some curves below of the
dive, but the Qt one is overlapping - probably the
way that I'm using the gc information)
Need to investigate a bit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
a few code was moved around, a macro that contained
the form of x ? : y; had to be rewritten to x ? x : y
since c++ doesn't allow ternarys without the middle operator.
The color-choosing for the Cylinder Pressure broke
on the Qt port - but it's a small issue.
I'm painting everyone as 'dark green' now, will
fix that later.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Make the graphics_context part of the ProfileGraphicsView and remember
that the plot info is already a part of the graphics_context (we kept
passing around both of them in the Gtk code... pointless but a leftover
from before adding the pi to the gc...)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There are subtle differences, the Cairo version looks
prettier - but that's fixable. I did a small triangle
and a exclamation mark on it. maybe a gradient would
make a good difference there.
this item has a ItemIgnoresTransformation tag, so
scalling, rotating or zooming will not change it's
size.
The tooltips are not yet ported.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The plot_text function from the cairo-methods are now ported
on the qt version. this patch moves around some code since
quite defines are already used and I didn't want to reinvent
the whell.
Original code used varargs, but I prefered to change it
, so now it receives just a reference to a QString object
and the string must be constructed before sending,
using the .arg methods.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The mean depth now is plotted correctly.
I wanted to do more stuff on this commit, but since
it required that a few things on profile.c got moved
to profile.h, commited to not have a huge blob for review.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The first plotting method was removed from profile.c
to profilegraphics.cpp and some conversion ( almost 1 to 1 )
was made so that the code could work.
Since the code is big - this commit has just a part of it
working - it plots the grid. but already works for testing
the resizing of the window and Zooming ( unimplemented )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Started working on the Qt version of the Plot, initially
nothing is printed - but this is not a bad thing,
the program doesn't explodes too. :)
some work had to be done about the 'bool/gboolean' stuff
so I removed all gbooleans in the code that I'v encountered.
A new file was created ( profile.h ) so I could put the
signatures of helper methods that cairo used to call.
till now the code computes the max limits.
Next patch the first drawing will be made.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The colors on colors.h were done to fill a special
struct by Subsurface - I removed that structure and
replaced the code that generated the map of colors
to a QMap. I know that this changes are not very
'welcomed', but C++ has issues on creating & initializing
complex static members, this was the best way that I could
think of.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Doing this on Arch Linux with gcc 4.8.0 helped find one real bug.
The rest are simply changes to make static functions externally visible
(as they are kept around to eventually become helpers used by Qt) which
for now avoids the warnings.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- rip all Gtk code from qt-gui.cpp
- don't compile Gtk specific files
- don't link against Gtk libraries
- don't compile modules we don't use at all (yet)
- use #if USE_GTK_UI on the remaining files to disable Gtk related parts
- disable the non-functional Cochran support while I'm at it
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The pressure interpolation code mostly worked for the simple cases, but
got terminally confused for some more complex gas change situations,
resulting in nonsensical interpolations.
This simplifies and clarifies the code a bit, and in the process fixes a
few special cases where the gas interpolation segments didn't end up
having the end conditions set.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
They do the "02=0 means air" thing autmatically, and make for less
typing. So use them more widely in places that looked up the o2 and he
permille values of a gasmix.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
get_cylinder_index() looks up which cylinder to use based on the
gaschange event that describes the mix. However, it was both buggy and
not very good.
It was buggy because it didn't understand about our air rules, and it
was not very good because it required an exact match (after rounding our
permille-based numbers to percent).
So fix it to use the right permille values, and look for a closest match
(using the normal sum-of-squares distance function - although I wonder
if we should consider helium percentages to be "more important" and give
them a stronger weight).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
.. so that different computers that have different ordering of the same
cylinders will see the end result the same way.
This also fixes up the sample sensor index and generates special initial
tank change events for the dive computers that had their cylinder
indexes renamed on them.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some colors such as the ones for ceiling were still green on B/W
print. This patch makes all colors in the second row
of profile.c:profile_color monochrome.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also make the profile border color the same as the depth grid color.
Fixes#97
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This replaces the hardcoded sizes all over the sources.
Make the size in the text_render_options_t a double - With this you can
compile Subsurface with
make CLCFLAGS=-DTEXT_SCALE=1.5
and the fonts in the profile are 50% bigger. Very nice on a high-pixel
density display.
Also remove the unused text_render_options for event text.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As logical extension of the ability to add bookmarks and gas changes this
adds the ability to remove (any arbitrary) event that happens at the mouse
position (specifically, that is within +/- six (scaled) pixels around the
x-position (time) of the mouse). That's the same width that the triangle
marker occupies which was moved to be centered around the event time in
commit 5752e9742e86 ("Finetune event triangle position to have the top
point at the event time").
Fixes#60
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is completely bogus as all it does is print out the corresponding
time for the spot we right-clicked on the profile. But that at least shows
that the infrastructure is working as intended...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- Add a button and callback to the print dialog to let the user select
color printing.
- Add a state variable to the options struct to track the users choice.
- Use a darker color for the grid on dive plot; that way we can see it.
- Default to use color printing.
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A couple of these could clearly cause a crash just like the one fixed by
commit 00865f5a1e1a ("equipment.c: Fix potential buffer overflow in
size_data_funct()").
One would append user input to fixed length buffer without checking.
We were hardcoding the (correct) max path length in macos.c - replaced by
the actual OS constant.
But the vast majority are just extremely generous guesses how long
localized strings could possibly be.
Yes, this commit is likely leaning towards overkill. But we have now been
bitten by buffer overflow crashes twice that were caused by localization,
so I tried to go through all of the code and identify every possible
buffer that could be affected by this.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
this patch adds a 3rd column to the media array of rgba so we now have one
each for screen, b/w & color printing. I have defaulted to using the
same color printing & screen, but this can be altered anytime.
I have checked that the application still compiles and prints. The print
out (colour option selected) shows the deco ceiling steps in pink but
everything else appears grey scale. Further work will be required to apply
the colours to the print out, although I'm not yet sure what that involves.
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We create a fake divecomputer in order to draw a reasonable profile, but
when setting that up we used an empty divecomputer instead of starting
with the one that we have. This lost data (e.g., the model name of the
dc).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This creates a helper function called "gas_volume()" that takes the
cylinder and a particular pressure, and returns the estimated volume of
the gas at surface pressure, including proper approximation of the
incompressibility of gas.
It very much is an approximation, but it's closer to reality than
assuming a pure ideal gas. See for example compressibility at
http://en.wikipedia.org/wiki/Compressibility_factor
Suggested-by: Jukka Lind <jukka.lind@iki.fi>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Uses profile.c:evn_foreach() to retrieve the number of events, which
if zero, no table is added in the dialog and the label is added instead.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
GET_LOCAL_SAC did not check if the two entries had different time stamps
and could therefore cause a divide-by-zero. x86 doesn't fault on that -
it's still wrong. This now calls a function that does proper checking of
all the values involved in the calculation.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While the profile switched between different divecomputers, the Dive Info
notebook always showed either information from the first divecomputer or
(with some of the recent changes) information that had been collected from
all divecomputers and somehow consolidated for the dive.
With this commit we now show the data from the same divecomputer that is
also shown in the profile (which means if some data is available from one
of the divecomputers and not from another that will be correctly reflected
in the Dive Info notebook as the user cycles through the divecomputers.
This does beg the question if we should have some kind of "best data
available, considering all divecomputers" mode - but that's definitely not
something I'll tackle prior to 3.0.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Populate during dive fixup as the maximum depth shown by all the
divecomputers. Use this value (instead of the one in the first
divecomputer) in printing, statistics, etc.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit b6c9301e58 ("Move more dive computer filled data to the
divecomputer structure") we moved the fields that get filled in by the
dive computers to be per-divecomputer data structures.
This patch re-creates some of those fields back in the "struct dive",
but now the fields are initialized to be a reasonable average from the
dive computer data. We already did some of this for the temperature
min/max fields for the statistics, so this just continues that trend.
The goal is to make it easy to look at "dive values" without having to
iterate over dive computers every time you do. Just do it once in
"fixup_dive()" instead.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There are two ways to look at surface pressure. One is to say "what was
the surface pressure during that dive?" - in that case we now return an
average over the pressure reported by the different divecomputers (or the
standard 1013mbar if none reported any).
Or you want to do specific calculations for a specific divecomputer - in
which case we access only the pressure reported by THAT divecomputer, if
present (and fall back to the previous case, otherwise).
We still have lots of places in Subsurface that only act on the first
divecomputer. As a side effect of this change we now make this more
obvious as we in those cases pass a pointer to the first divecomputer
explicitly to the calculations.
Either way, this commit should prevent us from ever mistakenly basing our
calculations on a surface pressure of 0 (which is the initial bug in
deco.c that triggered all this).
Similar changes need to be made for other elements that we currently only
use from the first divecomputer, i.e., salinity.
Reported-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The temperature plot line was drawn to the end of the dive, but the last
temperature plot text was printed near the last temperature *sample*.
This was most visible on dives/test27.xml where two "20˚C" were
printed on top of each other at the start of the dive, while nothing
was printed at the end.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We had this special logic to not show the end of a dive when a dive
computer shows a series of very shallow samples (basically snorkeling
back to shore after the dive ended). However, that logic ended up being
global per dive, which is very annoying when you have two or more dive
computers, and it decides to cut off the second one because the first
one surfaces.
So get rid of this per-dive state, and just use the plot-info 'maxtime'
field for this (we never used the 'start' case anyway). That way we
will properly cut off boring surface entries only when they are past the
end of the interesting entries of *all* dive computers, and we won't be
cutting things short.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It seemed so smart to just base the coordinates on what's already in the
graphics context. Except that we apparently got a 0 to 0 range for y
coordinates if there are no pressure samples for a dive.
This fixes the problem and GF values are shown even for dives without
pressure samples.
Reported-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This moves some double/floating handling for po2 to plain integer. There
are still non int values around (also for phe and po2) in the plot area.
Signed-off-by: Jan Schubert <Jan.Schubert@GMX.li>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fixing the SP change event and introducing a bailout scenario.
I decided not to use a event showing SP=0.0 nor using a gaschange event as
is in fact there is no gas change related to bailing out itself. If there
is also a gaschange for the event it will be displayed anyway.
Signed-off-by: Jan Schubert <Jan.Schubert@GMX.li>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When the data file is closed we should reset the events that we offer for
filtering.
Reported-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit a52b0aa5ea8d ("Show Gradient Factors in plot when showing
calculated ceilings") incorrectly modified the gc which caused the mouse
position no longer correctly being correlated to the time on the plot.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we create the event names, the name itself does not include the
information about whether the event is the beginning or end of some
state, so we end up having things like events named "deco" and then in
the event flags it says whether this is the *beginning* of deco, or the
end.
And when we show the event, we only used to show the name. This patch
makes us show whether it's the begin or end event for events that have
those flags. So now you see "deco begin" and "deco end" instead of just
two events both called "deco".
It would perhaps be nice if we somehow showed the range between the
events too, and paired them up visually some way, but that's a separate
and much more difficult thing to do.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Mostly coding style and whitespace changes plus making lots of functions
static that have no need to be extern. This also helped find a bit of code
that is actually no longer used.
This should have absolutely no functional impact - all changes should be
purely cosmetic. But it removes a bunch of lines of code and makes the
rest easier to read.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds the GFlow/high values used to calculate the ceiling (if any).
Right now it shows those numbers even if at no point of the dive there was
an actual ceiling (but only if showing the ceiling itself is enabled).
This should make it easier to for the user to make sense of the calculated
ceiling, especially if posting screen shots.
As an aside - for some dive computers like the OSTC and the Shearwaters we
should be able to also plot the GF used by its calculation which might be
interesting for comparison purposes, as both of them also give us the
ceiling (lowest deco stop) calculated during the dive..
See #13
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This made sense briefly when libdivecomputer reported ceiling data through
events with those flags, but it actually made us hide valid events from
some divecomputers that give us only very limited information (e.g., deco
events from some Suunto divecomputers).
Reported-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Analyzed-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The plot-info per-event 'same_cylinder' logic was fragile, and caused
us to not print the beginning pressure of the first cylinder.
In particular, there was a nasty interaction with not all plot entries
having pressures, and the whole logic that avoid some of the early
plot entries because they are fake entries that are just there to make
sure that we don't step off the edge of the world. When we then only
do certain things on the particular entries that don't have the same
cylinder as the last plot entry, things don't always happen like they
should.
Fix this by:
- get rid of the computed "same_cylinder" state entirely. All the
cases where we use it, we might as well just look at what the last
cylinder we used was, and thus "same_cylinder" is just about testing
the current cylinder index against that last index.
- get rid of some of the edge conditions by just writing the loops
more clearly, so that they simply don't have special cases. For
example, instead of setting some "last_pressure" for a cylinder at
cylinder changes, just set the damn thing on every single sample. The
last pressure will automatically be the pressure we set last! The code
is simpler and more straightforward.
So this simplifies the code and just makes it less fragile - it
doesn't matter if the cylinder change happens to happen at a sample
that doesn't have a pressure reading, for example, because we no
longer care so deeply about exactly which sample the cylinder change
happens at. As a result, the bug Mika noticed just goes away.
Reported-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
