Don't just pop the top page off the stack, but pop the download page.
Also explicitly switch to the dive list afterwards.
Additionally, fix a typo in the code that attempts to deal with the
shortcut buttons. I believe that right now this code is completely
broken, but while I contemplate how this should work, let's at least fix
the stupid typo.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We no longer have a dive role - on the plus side, we also don't use this
variable, so I guess this isn't a big deal.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While this is disabled and is unlikely to be completed, the typo caused
confusion with translators.
This shows one of the weaknesses of the way we set up our translations, in that
always both desktop and mobile are translated together, and disabled code is
also included in those translations, causing unnecessary work for the
translators.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The number of dives was updated when the model of the list was
changed. Since we removed the multi-threading, the model is
not disconnected/connected anymore and therefore we don't get
the appropriate signal. Instead of introducing a different
signal, make the shown-value a Q_PROPERTY. Thus, we can easily
send a changed signal if we have to.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
I experienced weird crashes that seemed timing-related when
using the filter. Therefore, remove the multi-threading thing.
So far no more crashes, but keep a close eye on that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a combo-box where the user can switch between "fulltext",
"people" and "tags" filtering. Connect the combobox to the
already existing filter-code.
Dirk: make combo-box smaller by using a smaller font and restricting
the width. Setting both maximum and preferred widths gives more
consistent results.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use the TemplateRadioButton to get the default styling - and by switching to the
RadioButton from Controls.2 we also get exclusivity by default.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When running mobile on desktop there are some odd jumps in the mouse position while in
drag mode (press and hold, then move). They make the user interface seem jerky.
But I haven't observed the same behavior on the mobile device when testing. So
I'm not sure what to do with that.
Using opacity to indicate that the user is able to pan the profile seems reasonably
obvious; not sure if it's the best possible way to do this.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should never have been merged as it was. The UI was atrocious and the
functionality was by and large untested.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There is no native file dialog, access to the file system is highly restricted
and will be much more so in Android 11. Let's not even start with this.
This should never have been merged as it was.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A tablet or phone is not a computer. What would you do with a CSV or TeX/LaTeX
file on a phone. Yeah, I get it, feature parity.
This should never have been merged.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This changes the 'GPS' entry to be called 'Location', moves the 'Map' entry
below that, and reuses the map icon for both the map inside this submenu and
for the main menu item.
It moves the 'About' entry under 'Help' and both 'Export' and 'Dive summary'
under 'Dive management'.
This way we have only five (or with 'Developer' enabled, six) entries in the
main menu making it much more appropriate for really tiny screens.
Additionally, the entrieis moved into sub-menus are ones that are not all that
commonly used.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Buttons ignore the width of the enclosed label and base their width on the
illogically named implicitWidth instead.
Also translate the button text.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Creating more space for the header column and a little visual separation for
the different sections.
The commit is much smaller than it looks - try 'git show -w'.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The 'Map it' button could overlap with the dive number below, depending on font
size. This fixes the issue.
Reported-by: Peter Reinold <mcc.nash@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Corrected typo of the word celsius in three files:
core/import-csv.c
core/divefileter.h
mobile-widgets/qml/Settings.qml
These were spelled as celcius but corrected these to celsius.
The 'core files were just comments but the mobile-widgets file would be
'active' code.
Reported by: tormento <turment@gmail.com>
Signed-off-by: Jason Bramwell <jb2cool@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This also deals with a bug we had before where we didn't re-start the calculation
for the various sizes from the assumption of 'at least 21 grid units'. Now you can
rotate the device and the right thing will happen.
Small warning - this checks the orientation of the screen, which is exactly what
you want it to do on your device. When running mobile on desktop this may not be
what you expect. Even if the window has a portrait aspect ratio, your screen is
likely still landscape... so testing this feature in mobile on desktop mode is a
bit harder...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
No one will ask you about your dives in the last seven months (and the
existing code actually provided the past 210 days in that case). Instead
do more intuitive periods. Last month, quarter, half year, year.
Use Qt's ability to make sane date calculations easy.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use more idiomatic ways to indent the rows, replace the TemplateLabel with a
simple Label since drawing the extra rectangle for the background of the
TemplateLabel is obviously redundant and using it doesn't change the number
of properties we need to set.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I keep forgetting that the verticalAlignment is only within the current object,
which means that in a single line label it has no meaning at all.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On tablet devices, the summary page stays open and therefore
the summary is not refreshed. For now, add a button. Later, this
should be connected to signals when dives are edited, added or
deleted.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add section headers to the dive summaries on mobile by adding
a section-property. Of course, this will not work on desktop.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we now use a model to calculate the dive summary, there
is no need to export recalculation of the dive summary via
QMLInterface.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Implements the ListView and its delegate to use the dynamic data
provided by the DiveSummaryModel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Recalcluate not only the statistics for the given period, but also
the global first and last dive date.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of transporting the global first and last dive date
in the dive summary, calculate it in an external function.
Since we already have time and date functions in qthelper.cpp
implement those functions there. Provide a stub in QMLInterface
so that QML can access these standalone functions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This seems to work much more reliably as it specifically compares the cursor
position to the visible bottom and top of the screen.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The GridLayout isn't part of a Layout, so set its width and
have the combo box fill it's part of the grid.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This still is way to fragile. Ordering of object completion doesn't appear
consistent. Hopefully bringing the properties all into one (now reasonably
named) object will help.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I don't expect this to be complieted. I'll keep it in the tree
for the moment, but expect to remove all of the related code
eventually.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With the columnSpan 3 (in a grid with only two columns) they were drawn
on top of the drop down for the theme.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In a color swatch the color of the body of the swatch is the one that
matters. And we need to ensure readability. So for each pair of colors,
use the combination in the regular order (color/textcolor) for the
background swatch, and inverted for the text swatch.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The TemplateLabel comes with a set background color which creates a very odd
effect and makes the text generally unreadable in the color swatches.
Fix this by matching the color of the parent rectangle.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These are not color swatches like the rest, these are the column titles, so
don't draw them the same way as the color swatches.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
move initialWidth/initialHeight out of subsurfaceTheme to placeHolder,
this secures no change in behaviour.
Signed-off-by: jan Iversen <jan@casacondor.com>
Show all colors in a theme, allowing user to change theme.
This is preparation for allowing users to click on the individual
colors and change them.
Signed-off-by: jan Iversen <jan@casacondor.com>
Use the TemplatePage and TemplateButton in the converted pages.
In order to avoid a bigger search/replace all other pages are left
untouched (for now).
Signed-off-by: jan Iversen <jan@casacondor.com>
Do "git mv SsrfButton TemplateButton", and search/replace
all uses.
The general idea of the templates are to secure common layout,
but also to isolate the Kirigami parts (slowly) in the templates.
Signed-off-by: Jan Iversen <jani@apache.org>
When either length or volume unit is changed, the text needs to be
changed.
Let signal lengthChanged and volumeChanged cause a recalcation and therefore
new text.
Signed-off-by: jan Iversen <jan@casacondor.com>
fontMetrics is no longer used in production code, but still in the theme test
page.
Isolate fontMetrics in ThemeTest page.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order to remove fontMetrics from QML, replace references (height)
in DownloadFromDiveComputer and Settings
Add include kirigami as needed
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move setting of font properties used throughout to themeInterface.
Add new settings "currentScale".
The properties are kept in main (subsurfaceTheme) in order not to do
a big search/replace.
Update settings to use currectScale and signal changes in themeinterface.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Check defaultfont and calculate basepointsize in themeinterface instead
of in QML.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There were quite a few issues with the code - clearly a complete failure of
code review.
- all values were '??' if a period contained no dives
- imperial units were not calculated at all
- significant truncation and data loss in the way totals were added as meters
and minutes instead of the higher precision data that is available
- several issues in striing conversion methodology, e.g. missing zero padding
for minutes
- missing maxSac
- incorrectly calculated avgSac
- incorrectly claculated number of EANx dives
- hard to read code with most variables named 'temp'
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Solve kirigami error:
INFO: qrc:/org/kde/kirigami/ScrollablePage.qml:187: TypeError: Cannot assign to read-only property "parent".
Kirigami.scrollPage does not allow a ListModel be defined, even though it is allowed in QtQuick.
Signed-off-by: jan Iversen <jan@casacondor.com>
Replace subsurfaceTheme with ThemeNew, since there are still 2 objects
subsurfaceTheme in main.qml and ThemeNew in themeinterface.*
Replace theme color references with ThemeNew, as they are no longer available
in main.qml (subsurfaceTheme).
Signed-off-by: jan Iversen <jan@casacondor.com>
Add DivePlannerSummary, a page to show in dive centers.
Allow user to select period for the 2 colums in DiveSummary.
Default is "Total" and "3 month", but allowing the user to change
these, make it a very simple tool to view how the user progresses.
Variables are taken from Backend.
[Dirk Hohndel: adjusted text strings as these aren't really months]
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add property "colorBackground" to allow instances of templateLabel to have
background color overwritten.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Update Settings to use ThemeNew (for theme change)
Reduce subsurfaceTheme in main
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Update size and colors.
Changing the TemplateSection, automatically changes all sections
in the system, converted to the new layout.
The styling would be better in a style/theme class, but
subsurfaceTheme is in main.qml and not in a C++ class, so for now
use primitive styling.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The standard SpinBox uses far too much real estate.
The new SpinBox have a smaller footprint, and more visual effect.
Changing the TemplateSpinBox, automatically changes all spinboxes
in the system, converted to the new layout.
The styling would be better in a style/theme class, but
subsurfaceTheme is in main.qml and not in a C++ class, so for now
use primitive styling.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add property pressureUnit to use as BAR/PSI text.
Added slot to catch when user changes BAR <-> PSI.
Add Backend variables to Planning section.
Signed-off-by: jan Iversen <jan@casacondor.com>
Add bottompo2, decopo2 and bestmixend to QMLInterface
Bestmixend in gas options changing with
meter/feet
Signed-off-by: jan Iversen <jan@casacondor.com>
The real values are 1.0 to 10.0, but QML needs int so mobile
gets values 10.0 to 100.0
add sacfactor() to QMLInterface and update QML.
Signed-off-by: jan Iversen <jan@casacondor.com>
Move conversion cuft <-> liter from desktop-widget/diveplanner.cpp
to plannerShared, to facilitate the same results in mobile
diveplanner
Use Backend for bottomsac/decosac and update to check
for switch LITER <-> CUFT
Add bottomsac/decosac to QMLinterface.
Signed-off-by: jan Iversen <jan@casacondor.com>
Variables without conversion, do not need to pass plannerShared
(due to the QML interface).
Simple variables do not pass plannerShared, but diveplanner
in desktop-widgets and qmlinterface in mobile-widgets call the
implementation directly.
Signed-off-by: jan Iversen <jan@casacondor.com>
Catch when volume type is changed and update bottomsac/decosac.
Also update text l/min <-> cuft/min and add a space between value and unit.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Drop_stone_mode, when set, affect the descent rate, so place it alongside the
descent rate.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make notes rates available to QML through the Backend interface.
Remove the corresponding variables from plannerShared.
Getters are from prefs. while setters are linked to diveplan model.
Remark: signals from qPrefDivePlanner is used, because the diveplanner model
sets qPrefDivePlanner but do not issue special signals.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For METRIC and IMPERIAL, show the radiobuttons disabled
For PERSONALIZED, allow user to select individual units.
Signed-off-by: jan Iversen <jan@casacondor.com>
Use Backend instead of Planner for ascent/descent variables.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Change Settings and DivePlannerSetup to use the strongly typed enums
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Create section advanced around the remaining gridlayouts, and adjust.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move gridlayout unit_settings to TemplateSection units, without changing
anything (apart from adding a visible: attribute).
Removed first label in units_settings, since it is the title of the section
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move gridlayout themesetting to TemplateSection theme and use the
TemplateTitle. Also switch from using PrefDisplay.mobile_scale to
subsurfaceTheme.currentScale
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
move gridlayout divecomputers to TemplateSection general, without changing
anything (apart from adding a visible: attribute and replacing the Rectangle
used to draw a line at the bottom with a TemplateLine on top.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
move gridlayout defaultCylinder to TemplateSection general, without changing
anything (apart from adding a visible: attribute and replacing the Rectangle
used to draw a line at the end with a TemplateLine at the top).
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
move gridlayout cloudSettings to TemplateSection general, without changing
anything (apart from adding a visible: attribute and removing the rectangle
used to create a line).
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
ColumnLayout does not work well with TemplateSection,
so change to Column
Add TemplateSection "General Settings"
"General Settings" are open when visiting page first time.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
bump import versions to reflect Qt 5.12
and remove unused imports
remark QtQuick 1 and QtQuick.Controls 1 are depreciated since Qt 5.12
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace Control.TextEdit with TemplateTextEdit, in order to use
common font/color scheme.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace Control.ComboBox with TemplateComboBox, in order to use
common font/color scheme.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace Control.label with TemplateLabel, in order to use
common font/color scheme.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace CloudStatus.<value> with backend.<value> as part
of making enum sharing between C/C++ and QML more robust.
Replace PrefCloudStorage.verification_status with
backend.verification_status to use the strongly typed function.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
add missing colors so that dark theme contains the
same colors as "colors in use".
Update the darkTheme() to correctly copy colors from
pink theme
Signed-off-by: jan Iversen <jan@casacondor.com>
add missing colors so that pink theme contains the
same colors as "colors in use".
Update the pinkTheme() to correctly copy colors from
pink theme
Signed-off-by: jan Iversen <jan@casacondor.com>
add missing colors so that blue theme contains the
same colors as "colors in use".
Update the blueTheme() to correctly copy colors from
blue theme
Signed-off-by: jan Iversen <jan@casacondor.com>
move contrastAccentColor, lightDrawerColor
to block of used colors in order to avoid confusion.
move darkDrawerColor to dark theme.
Signed-off-by: jan Iversen <jan@casacondor.com>
default_cylinder was moved from PrefGeneral to PrefEquipment,
but Settings was not updated
update Settings.
Signed-off-by: jan Iversen <jan@casacondor.com>
When changing METERS <-> FEET, the text change automatically
between "m/min" and "ft/min".
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Do not use a.set_b(value); it works, but it introduces yet another way of using
the QML/C++ interface, furthermore the function might not be called set_b in
some future, which is the reason the function is define in Q_PROPERTY
Use a.b = value, that respects Q_PROPERTY, and is slightly more performant,
most importantly it's like all the other settings so noone starts wondering why
this is special.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Set the text of ascent/descent rates.
This shows the correct speed units when the user switches between metric and imperial.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
but the proper way, as a direct check on
PrefCloudStorage.
This secures PrefCloudStorage is only tested once and not
n times. As a sideeffect it saves typing and control.
Signed-off-by: Jan Iversen <jan@casacondor.com>
(planning is excluded, due to not finished UI).
Connect all spinboxes with plannerShared.
This change allows live testing and compare with the desktop version.
Signed-off-by: Jan Iversen <jan@casacondor.com>
(planning is excluded, due to not finished UI).
Connect all checkboxes with plannerShared.
This change allows live testing and compare with the desktop version.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Switch oldStatus from qmlprefs to qmlmanager
This is the last use of QMLPrefs, which can later be safely removed.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
prefs.showpin is the same as
PrefCloudStorage.cloud_verification_status === CloudStatus.CS_NEED_TO_VERIFY
but is actually implemented as a separate variable.
Removing showPin in order to limit use of QMLPrefs, which is the overall goal.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace all credentialStatus() with cloud_verification_status()
Where both prefs.credentialStatus and
PrefCloudStorage.cloud_verification_status are being set, remove
prefs.credentialStatus.
These replacements are valid since credentialStatus() is a simple
envelope over cloud_verification_status().
Also remove qmlPrefs::credentialStatus() from qmlPrefs (mostly to ensure no
replacements was forgotten).
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove use of prefs. (apart from instanciating the object) in
main.qml
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the divelist is only visible if online/offline (CS_VERIFIED/CS_NOCLOUD),
there is no need to check that to enable "Add dive manually".
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Manual sync was enabled both for CS_VERIFIED (online) and CS_NOCLOUD (offline)
and then in the trigger CS_NOCLOUD lead to a login screen, potentially
confusing the user.
Only enable manual sync with verified cloud credentials.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
prefs. is only important during the signin process, so use the standard
PrefCloudStorage variable
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add pin parameter to saveCredentials() thereby having all info about
credentials in one function call.
Add "" as pin in saveCredentials() - main.qml, when verifying
credentials.
replace verifyCredentials() with saveCredentials() in the register
button on the pin page.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Copy functionality from cancelCredentialsPinSetup() into Cancel in
CloudCredentials.qml, this is part of the general qmlprefs cleanup.
Remove rootItem.returnTopPage() since the user stays on this page
(sees credentials again).
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For now just copy the functionality into Settings.qml, this is part
of the qmlprefs cleanup.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These were again copied from the material design icon set and will be used to
differentiate the various help topics.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The global drawer already has a name that can be referenced. This was adding
confusion as now both names were used in the menu structure.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The user is most likely to find out, that he does not remember
the password, when asked for it.
Add "forgot password" button in the signin dialog
(both credentials and pin dialog).
Signed-off-by: Jan Iversen <jan@casacondor.com>
rightPadding seems defined in Kirigami and the default value
causes a binding loop.
set rightPadding directly.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Add "Dive planner" menu entry in GlobalDrawer/Developer
with 4 subitems one for each diveplanner pages.
Developer is chosen in order to allow interested access to
pages, without raising expectations for the normal user.
That allow a step-by-step implementation
Signed-off-by: Jan Iversen <jan@casacondor.com>
Diveplanner consist of 3 pages:
- Edit, creation of the plan
- View, view the plan
- Manager, list/delete/select stored diveplans
With the current navigation system (pageStack)
View needs to be split in multiple pages.
Signed-off-by: Jan Iversen <jan@casacondor.com>
standard font-size as well as color are set
in the template (but can be overwritten in
the object)
Using TemplateComboBox allows central change of how
labels are presented in the UI.
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
standard font-size as well as color are set
in the template (but can be overwritten in
the object)
Using TemplateCheckBox allows central change of how
labels are presented in the UI.
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
standard font-size as well as color are set
in the template (but can be overwritten in
the object)
Using TemplateRadioButton allows central change of how
labels are presented in the UI.
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
standard font-size are set in the template (but can
be overwritten in the object)
Using TemplateSpinBox allows central change of how
spinBoxes are presented in the UI.
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
standard font-size as well as color are set
in the template (but can be overwritten in
the object)
Using TemplateLabel allows central change of how
labels are presented in the UI.
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
TempleSection is a clickable rectangle that contains
information.
It is used to
- group information
- hide/unhide details
And are an important building block in decluttering small
screen, while showing all information on bigger screens
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit a4d299e01e ("mobile-widgets/qml: use showPin/oldStatus consistently")
one instance of rootItem.showPin wasn't replaced with prefs.showPin and as a
result we had a very strange password entry line in the middle of the PIN entry
screen.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
StartPage does not belong in divelist.
Remove startPage from diveList and anchor in main.
Make needed functional changes.
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
DiveList should not depend on StartPage, so remove references to
startPage.
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instanciate DiveList like all the other pages.
Move DiveList properties set in main to DiveList.qml
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
setupActions() in StartPage contained a mixture of StartPage
actions and DiveList actions.
Split setupActions to be pure.
However currently StartPage is embedded inside DiveList so the
action onVisibleChanged must be simulated.
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
manager.finishSetup() have nothing to do with startpage/divelist,
but belong in main (seeing main as responsible for setup and window layout).
Move onCompleted functionality to main.
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace prefs.cloudPassword with PrefCloudStorage.cloud_storage_password in QML
Replace QMLPrefs.....cloudPassword with PrefCloudStorage::cloud_storage_password in C++
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace prefs.cloudUserName with PrefCloudStorage.cloud_storage_email in QML
Replace QMLPrefs.....cloudUserName with PrefCloudStorage::cloud_storage_email in C++
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user asked to change credentials it is equivalent to a signout,
so no need to store old credentials. This simplification allows removal
of the temporary credentials in qmlPrefs.
this commits secures the user is locked in the login page, until one
of 3 things happen:
- enter verified credentials (divelist is loaded from cloud)
- select no-cloud mode (divelist is loaded from local)
- enter new credentials, PIN page shows, enter PIN or
cancel (back to enter credentials).
This is consistent even if the program is restarted.
Old version had a non consistent way:
A user enters new credentials,
sees the PIN screen,
but does not receive the email immediately,
so works with other applications (causing the mobile app to close)
Having received the email with the PiN,
the user starts mobile again,
BUT does not see the PIN screen, instead the old credentials are used.
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Call saveCredentials with username/password to avoid first
setting the two and then calling.
Change saveCredentials() to use newUser, newPassword.
Signed-off-by: Jan Iversen <jani@apache.org>
Remove aliases for showPin/oldStatus and reference prefs.showPin/oldStatus directly.
showPin/oldStatus are "temporary" variables, that are not saved in settings,
so they easily be replaced
Signed-off-by: Jan Iversen <jani@apache.org>
change prefs.cloudUserName to PrefCloudStage.cloud_storage_email.
This is slightly more effective (direct instead of indirect), and
reduces the use of prefs.
This is part of limiting the use of prefs. (which is a precessor to
qPref) to the login process, and ultimately remove it.
Signed-off-by: Jan Iversen <jani@apache.org>
set_default_cylinder is accepted, because it is defined in Qt Meta system,
however the call is never carried out, because the Q_INVOKE macro is missing
Change PrefGeneral.set_default_cylinder(...) which is a function call
to PrefGeneral.default_cylinder = ... which is a builtin assignment
Signed-off-by: Jan Iversen <jani@apache.org>
When opening the saveAsDialog a second time, it contains
the last status from first time.
Clear statusText before calling saveAsDialog
Signed-off-by: Jan Iversen <jan@casacondor.com>
When using Connect, the context is switched, so close()
might or might not work.
Change unqualified close() to qualified uploadDialog.close()
Signed-off-by: Jan Iversen <jan@casacondor.com>
Handle reading/writing of userid/password settings in the
saveAsDialog and set field to visible when needed.
Activate divelogsde radio button
Signed-off-by: Jan Iversen <jan@casacondor.com>
The current png generation is intertangled with the desktop
UI, and a shared Webservice needs to be developed.
Block Radiobutton
Signed-off-by: Jan Iversen <jan@casacondor.com>
The current Webservice implementation is intertangled with the desktop
UI, and a shared Webservice needs to be developed.
Block Radiobutton
Signed-off-by: Jan Iversen <jan@casacondor.com>
DiveFilter have 2 implementation on or desktop and one for mobile,
the common export function uses DiveFilter (desktop version).
Block Radiobutton
Signed-off-by: Jan Iversen <jan@casacondor.com>
All exports are to file except 2 which are upload to web.
Integrate standard qml filedialog for all exports (minus 2).
Signed-off-by: Jan Iversen <jan@casacondor.com>
Prepare page for exporting the diveLog (feature currently
only in the desktop version).
Add Radiobuttons to select type of export
also add "anonymize button"
and a "explain" text field
Subsurface-mobile does not allow selection of dives, therefore
export will always be all dives
Signed-off-by: Jan Iversen <jan@casacondor.com>
qml demands all qml files to be in 1 directory, but allows
a "qmldir" file to reference qml files in other directories.
Add qmldir to reference map-widget.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Making this persistant creates a very unpleasant user experience.
And if a dive computer needs this setting, we really want people
to report this to us so we can fix it.
Fixes: #2358
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
default parameter values is not supported as this syntax was introduced
in ECMA-262 6th edition while QML only implements the fifth edition
(as of Qt 5.11).
remove default parameter and check for undefined instead.
Signed-off-by: Jan Iversen <jan@casacondor.com>
This is even easier and more obvious than copying the logs on the About page
and then manually creating an email and pasting those logs.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we change the filter string, we need to make sure that the collapsed model is
also aware of the change.
Similarly, instead of just calling resetFilter and directly changing the core
data structures, we need to set the filter to the empty string which ensures
that all three models get notified and the view updates correctly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The previous code assumes that both the vertical dive list and the list of dive
details which allows the horizontal swiping from dive to dive are based on the
same model.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Running Subsurface-mobile on iOS, the notification texts are sometimes very
hard to read, and in some situations the busy indicator isn't showing up at
all.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the dive list is connected to the model while the model is updated
with the downloaded dives, sometimes the UI hangs completely.
Disconnecting the model and then reconnecting it does add a fairly
noticeable delay on longer dive lists, so there are tradeoffs here.
Of course the obvious solution is to make reconnecting the model
faster...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This helps tremendously when tracking down some problems. We should
never use console.log.
In the process this also updates a couple of the messages to be clearer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Due to some recent changes processing the downloaded dives and
re-displaying the dive list can take quite a while. So show a small
message and the busy spinner to warn the user.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old code was ill named - this way the busy spinner itself
becomes reusable with a reasonable set of function names.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way new fixes are actually shown when the user looks at the dive
list after applying the GPS fixes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a couple more roles and remove the dive role that allows accesss to
the DiveObjectHelper in the first place.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
By getting a DiveObjectHelper and then dereferencing that we ended up
creating hundres and hundreds of these objects, only to immediately
destroy them after using a tiny part of the data.
Instead make those data available directly from the model, without
having to create a DiveObjectHelper forst.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When the user taps on a TextField to enter text, usually the virtual
keyboard will pop up. This code tries to ensure that the keyboard
doesn't cover the entry field that the user was trying to work on.
In order to centralize these changes, this introduces a new
SsrfTextField type which we use to also remove a few redundant default
settings that we previously had for every field. The one TextArea for
the Notes field didn't seem worth creating yet another type for, so
there the changes are done directly in DiveDetailsEdit.
The awkward timer mechanism is necessary as the keyboard pops up
asynchronously and then triggers a change of height for the app, so we
need to wait a little bit before doing the adjustment.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QML has ways to style icons - and we use that for the main theme color,
but it doesn't seem to work (anymore?) for the edit and save icons.
Instead of tracking down what changed there, simply switch between icons
with different foreground color, depending on theme.
All the other icons seem to work well in all three themes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When switching to the global tool bar this was lost, and then it turned
out to be broken and required more patches to fix.
Commented out because it doesn't work at all.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way we'll get a working back icon on Android and also correct font
size for the (translated) Back text.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previously if the dive was in a different trip, we'd scroll to that trip
but not expand the trip, which was a confusing user experience.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While pageStack.push() can handle pushing a page that's already there,
that creates an unfortunate sequence of currentItemChanged signal which
leads us to do the wrong thing with our map hack.
This commit changes things around to first look for the page in the page
stack and just switch to it, and only pushing the page as new if it
cannoot be found oon the page stack.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QML enums are a bit painful to use, so this uses poor man's emums
instead.
Basically what this changes is that a forced switch to the map doesn't
count as picking the map. That seems obviously correct, as otherwise you
could end up in a situation where a legitimate switch away from the map
is ignored.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes no sense and seems crazy. But it also seems to work,
For some reason with the current Kirigami version and Qt 5.13.1
selecting the map page makes the pageStack jump back to the previous
page right away. I cannot find what triggers this behavior.
Since I cannot fix the root cause, I am working around the bug. When we
select the map page we remember that fact and when a different page is
picked with the mapPage being the last page on the stack, we force the
page selection back to the map page. I can imagine countless ways in
which this could go horribly wrong - but right now I can't figure out a
better solution.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There doesn't appear to be a reason to pop all of the existing pages from the stack.
Just on principle, only close the drawer if it was open.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This had very strange results with the current Kirigami.
Instead set the width of those pages based on our overall column width.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old calculation was clearly bogus, we'd also get zero columns here.
Instead do a correct calculation of the number of columns and make the
resulting column width a property of the rootItem so we can refer to it
elsewhere.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There was a sad typo in commit eecca6aab0 ("Mobile: replace model-reset
by row-addition in DiveListModel::reload()").
Additionally, we need to also refresh the dive list so that the new
dives are shown.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We get incorrect changes to a new screen width that causes us to try
draw to a much larger screen than we actually have. Ignore those
changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Different Android devices seem to have different patterns of throwing
incorrect width information at us. This seems like a really bad hack,
but for the ones I've seen so far this should give us the right width
information.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
