for some reason the next selected dive is NULL after cancelling the
plan. I'm investigating.
This patch fixes the show of the empty profile and it also untangles
some parts of the code, keeping the mainwindow where it should belong
: the mainwindow.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This only partially works. If I start from an empty dive list, plan a
dive, then abort, there are still leftovers in the profile widget.
Hitting Ctrl-W clears that out. But it just runs the same cleanUpEmpty()
again...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On an empty dive list we would remember the new dive (which gets
auto-selected since it's the only dive) and then crash when we try to
restore that selection after cancel (in which case that new dive is gone).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to reset the editMode right away, otherwise all the changes to the
input field (when resetting the data after the user cancels) will cause
Subsurface to crash as current_dive will temporarily be NULL.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old way manually implemented a parser, where it could simply call a
regexp (or, in my case, a QChar) that will split the QString into many, to
find the beginning and end of the strings on the tags.
This patch also fixes a Qt5 off-by-one bug on the tag Visualization.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I'm sure canceling the plan when saving an added dive made sense at some
point for some reason. Right now it makes things crash, so let's not do
it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We were making things way too hard (and were doing things that don't need
doing, like clearing the DivePlanPointModel).
Currently we still crash after manually adding a dive or when canceling
a plan.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This still crashes when canceling the plan.
And doesn't display the correct dive profile until you switch to a
different dive and back.
And Keyboard focus is wrong.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As Tomaz suggested, I don't need to pass the information whether we are on
the planner into the function - it's part of the DivePlannerPointsModel
and therefore already knows.
Also, we want to make sure we actually use the gas that's in the first
cylidner of the staging dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This still crashes when you abort the plan.
And when you accept the plan, the profile stays stuck in PLAN mode.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The existing code had no chance of every working - on so many levels.
First unselect all dives, then extract data from a selected dive?
Set up the cylinder data (which didn't work), and then clear the data
again?
What the heck.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch paints the dive red if the user is breaking ceiling
on the planner - it's quite fast, it analizes the depth over the
max(tissue_1 .. tissue_16) and changes the color of the profile.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes the movements from the lines when added / removed
SO much better.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added a flag to only recalculate the axis when needed.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On the cleanup dirk forgot to set the plan tipe to PLAN instead of ADD
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Allow to both create the full default dive or ownly the descent and bottom
part (so the planner can deal with the ascent).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is working in the wrong way, mostly because I'm setting the
plannermodel to ADD state ( and the planner graphic to the
correct PLAN state ), but I don't know why - when on PLAN state
on the model, things just don't work.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This function should likely to move to C in the future, I'm only
adding this here because I'm changing this file so much ( already
4 rewrites of the function )
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The disableDcShortcuts is called inside of the ProfileGraphics
( I actually think that this method should be moved to there )
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This correctly enables the planner on the new profile,
but it doesn't triggers the correct paint on the canvas.
[Dirk Hohndel: remove other remnants of the disabled planner as well]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Gas consumption calculation fixed. Pressure difference still needs cylinder size to be set.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt5 got confused about this slot. This does the same as previously but
gets Qt5 happy.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When removing o2 from a gas, eg setting it to "", air, this code would
raise a nice fpe. Fix that by using gas_mod instead.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's a testament to how much I mess around with things that I hadn't
noticed that saving the column width doesn't actually work. Or actually,
saving them worked, loading them back failed as it was done too early and
the setColumnWidth() calls had no effect - and so the next time we quit
subsurface, the default width of 100 was written over all the saved
values.
This seems like an incredible hack but it has the advantage of actually
working. I look forward to someone with better insides into the inner
workings of Qt to properly fix this.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We set the column width in the dive list widget when we create that
widget, based on what is in the settings. And we save the current column
width back to the settings when we destroy that widget (so if Subsurface
is shut down correctly and Qt actually gets to run the destructor but not
when someone kills the program).
That means that if we recreate the dive list at any point while Subsurface
is running (and we do that a lot when you manipulate your dive list in any
way shape or form), any changes to the column widths are lost.
DiveListView::reload() explicitly calls setupUi() which reads the column
widths back from the settings - but changes made to the columns aren't
saved to the settings until we destroy the widget...
I see no reason why reload() should call setupUi(), so I'm removing that
call. Let's hope this doesn't break anything else.
Fixes#518
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We use mod calculations on multiple places, so make a separate helper
from it with proper types.
The "clumsiness" of defining a local variable to pass into the function
and out from it comes from the discrepancies in how c and c++ handles
initializations of variables in a struct.
Thanks goes to Tiago and Linus for pointing me in the right direction.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Call the translation functions for text strings when exporting the
worldmap to allow localized exports.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We should use the temperature units preferred by the user when exporting
dive info on Worldmap.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
User supplied text fields must be quoted on worldmap export. Without
quoting the HTML is broken e.g. with location "Angel's Window"
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Only a tiny bit of poke around the contextMenuEvent - the events
of the planner are dealt by the QGraphicsItem, and this makes the
logic pretty easy to follow. :)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
