When initializing the fulltext-cache and the dive-list, every
100 dives a notification was shown. I had a feeling that this
made startup significantly slower, but that could have been
purely psychological.
Therefore I measured and indeed, removing the fine-grained
notification, it becomes *significantly* faster. For a 3500
dives test log with mobile-on-desktop:
Initialization of the fulltext: 1350 ms -> 730 ms (-46%)
Initialization of the divelistmodel: 689 ms -> 113 ms (-83%)
Let's remove the fine-grained notification. There *is* a visual
indication of work-in-progress anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The compiler complained about this and it seems the
function does not need it.
Additional-test-suggested-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The planner does not know about events except gas
changes. But if the dive comes from the log, we
should preserve the dive computer events. At least
those that happend before we started to delete
waypoints to let the planner take over.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
When creating a TankInfoDelegate editor, reploting of the profile
was disabled to avoid replotting when the user scrolls through
the tank-info list. Since the code was changed to only set the
tank-info when the editor is closed, this became unnecessary
(hopefully). Indeed the clearing of the flag was removed in a
previous commit. This means that we also have to remove the setting
of the flag. Since this is all the TankInfoDelegate::createEditor()
function was doing, we can remove the whole function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
MainWindow::on_actionAddDive_triggered() updated the profile after
calling Command::addDive(). However, that is redundant because the
undo-machinery does the profile reload. Remove the call.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This fixes a bug: when deleting a picture when multiple dives
were selected, possibly the wrong dive was invalidated.
Thus, the dive wouldn't have been saved to the git repository.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DivePictureModel kept a pointer to picture for each entry.
Firstly, this is dangerous from a data-consistency point of view.
Secondly, the entry wasn't even used anywhere. Remove it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This isn't really a useful performance improvement, but it's still better,
IMHO, because we don't have a less specific match later on potentially change
an already executed match.
Because of our coding style the comment covering multiple cases of Pelagic dive
computers now is associated just with the first of those entries. I don't see a
way to do this differently without being in violation of our coding style, so
I'll just keep it like this.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Both Shearwater Petrel and Petrel 2 identify as 'Petrel' as their BT and BLE
names. But only the Petrel 2 supports BLE, thus only the Petrel 2 shows up in
the list of known dive computers on iOS (which supports only BLE but not
BT-only). By switching this around to always pick Petrel 2 we now correctly
detect such a dive computer on iOS.
Fixes#2739
Reported-by: Rick Holcombe <wrh@nc.rr.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt hates empty ranges, and even for a non-empty range, this is better
implemented as a reset than a remove.
This fixes a crash that I have been able to create on iOS by rescanning
for devices on the download page.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of assigning to a QVariant ret and returning at the end,
return directly in the various switch-cases. This makes the code
more readable, and is more idiomatic C++, as it avoids unnecessary
copies.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There is the free_picture() function with the same functionality.
The compiler/linker should recognize that and remove the duplicate
code, but still...
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This never made sense and I think I just forgot to complete this code
when I first worked on it. Now we can see which version of Subsurface or
Subsurface-mobile created a merge.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When pasting cylinders, the destination dive got a verbatim copy
of the cylinders of the source dive. This is not what users want:
for example, the start and stop pressures from the dive computer
as well as the gas mix may be overwritten.
There seems to be no perfect solution, since some times users may
want to paste the gas-mix.
Therefore, let's choose a heuristic approach for now (in the future
we might implement a UI-flag):
When copying over existing cylinders, only copy type and maximum
pressure.
When adding new cylinders (i.e. from-dive has more cylinders than
to-dive), copy everything, but reset start- and top-pressure to 0,
which represents unkown.
Moroever, in the latter case, set "manually added" to true, since
obviously this wasn't added by a dive computer.
Fixes#2676
Reported-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
While having the local user information in the repo on Linux seemed
clever when we implemented it, it's inconsistent with all the other
platforms. Let's just not do that unless the user has indeed set
a global name/email pair for git.
Instead indicate if this was Subsurface or Subsurface-mobile.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This function was not meant to be called with already existing data.
However, if it was, it cleared the words without clearing the fulltext
caches of the dives. This lead to crashes.
Be more resilient by not clearing the words: Already existing dives
are unregistered during the process of populating anyway. So this
now *should* work if new dives are added to the dive list and then
this function is called.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This function was named improperly: it was only used on freshly
loaded data. Indeed, attempts to use it to actually reload lead
to crashes.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
parse_file() refused to load from a git repository if we already
had that repository and there were no changes. However, this only
checked the global divelist_changed flag, which does not track
undo-commands. Thus, after editing dives the user couldn't reload
from git.
Remove this check. It is somewhat questionable that the io layer
refuses to load from a repository anyway. Let the caller decide.
There appears to be a check_git_sha function for that purpose(?).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The comment states that Qt treats TAB as cancel when in the combobox.
However, testing shows that this use-case works without this hack.
Since it caused weird behavior (the data was set *after* the editor
was closed, leading to inconsistent state), remove it.
Note: this overrides the previous commit, which is therefore redundant
from a history point of view. However, I'll leave the previous commit
in so that if something turns out to break, we can figure out which
of the two changes it was.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
fixTabBehavior() set the editor text *after* closing the editor.
This left us in an inconsistent state where we thought that the
editor is active. By reversing two connects, this problem is resolved.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Parts of the code were not compiled on mobile, because they used
the undo-command infrastructure. However, since mobile now also
compiles that, we might as well remove the conditional compilation.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
All combobox-delegates shared a number of static status fields.
In a quest to make the code more reentrant, move that to the
actual object. The fields have to be defined as mutable, since
they are set in const member functions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Update of the profile is now done by the undo-commands. If the
planner needs this, it is probably better to connect directly
to the model, not the delegate.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When editing cylinders or weights directly in the table widgets,
no warning was shown if multiple dives were affected. To solve this,
emit signals from the respective models and catch them in dive
equipment tab. Not very nice, but it works for now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Don't overwrite the full cylinder when editing a single field.
Implement three "modes": editing of type, pressure and gasmix.
Don't consider individual fields, because some of them are
related. E.g. you can change the gasmix by setting the MOD.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We stored only one cylinder in EditCylinderBase, which is the
base class of RemoveCylinder and EditCylinder. This turns out
to be too crude: when removing the "same" cylinder from
multiple dives, there are some "hidden variables" such as
bestmix_o2 or manually_added, which might actually be different.
We don't want to overwrite those on undo of delete.
Moreover, the cylinder edit is way too crude at the moment,
as it overwrites the whole cylinder even when the user edited
only a single field. To enable a more refined edit, we have
to store each changed cylinder.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently we use the same_cylinder() function to determine
which cylinders should be edited in a multi-dive edit. Make
this more flexible by introducing a flag-set, such that
the undo-command can select which cylinders are considered
as equal:
- same type
- same pressure
- same gas mix
- same size
Currently both undo commands use same type, pressure and
gas so that the behavior stays unchanged.
The future goal is to split the cylinder-edit undo command
into different commands so that when, for example, editing
the type only the type is considered by not the gas mix.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There was only one editMode left (MANUALLY_ADDED_DIVE).
Therefore replace by a flag. This makes the code more consistent,
because the conditions "editMode != NONE" and "editMode ==
MANUALLY_ADDED_DIVE) actually meant the same thing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The editMode was set to IGNORE_MODE when programatically setting
fields so that we can ignore changed-signals.
That seems to be orthogonal to whether we are in edit mode
and indeed when setting IGNORE_MODE the edit mode was
saved and restored.
Therefore, replace the IGNORE_MODE by an independent ignoreInput
flag.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For reasons that I don't understand, we keep track of the
current combo-box text for our model-delegates. However,
that text was not initialized when the editor was generated,
leading to a UI bug in the cylinder and weight widgets:
Activate a field, click somewhere else -> either the empty
string or the previous string was set.
Reported-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Use the user-editable MOD-pO2 preferences value when creating
a default cylinder. It is not clear to me, when that even has
a consequence, but it looks like the right thing to do.
Reported-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If a gas-switch is removed we have to perform the same action
as if a gas-switch is added: fixup the dive and signal the
changed cylinder and stats.
Adapt the RemoveEvent command accordingly. Copy the code of
the AddGasSwitch command and simplify for the fact that
only ony cylinder can be affected.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Select and make current the affected dive. And also switch
to the divecomputer that was affected.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Apparently this was used to hide events in pre-Qt times. However,
that has already been reimplemented in different ways. Let's remove
that commented-out code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
