This function checked a dive for a search string. Its functionality
was replaced by a fulltext index.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In analogy to the desktop version, use the fulltext index in
DiveFilter. This code is not yet executed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This function did not access any class members and was not used
outside the tranlation unit. Let's make it local (i.e. static)
to the translation unit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There are now three filter modes:
1) Dive site
2) Fulltext
3) Normal
When doing a fulltext search, get the dives that match the
fulltext filter and then apply the other filters on that list.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When loading dive data, populate the fulltext index. When clearing
dive data, free the fulltext index. When deleting a dive, remove it
from the fulltext index.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add code that indexes all words of a dive and provides searching
for words.
A query is represented by the FullTextQuery class, which can be
initialized by assigning a string to it. It is basically a list
of words.
The result of a search is stored in the FullTextResult class,
which is a list of dives.
The actual indexing and searching is implemented in the FullText
class. However, this class is not exported because the interface
is partially accessible to C. Notably, the reloading of the
fulltext index is done from the C core.
Currently, the indexing and searching is totally unoptimized.
In a ~4000 dives test-log searches typically took single-digit
ms times. There is ample room for optimization (e.g. when
searching for multiple words, chose the words with few dives
first and when down to a few dives, check them individually).
The words of each dive are tokenized and uppercased and
cached with the dive. A pointer to these words is stashed
in the dive structure.
For now, compile only on desktop.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The FilterData struct has the enum StringMode, which describes how
strings are searched (substring, startswith, exact). To make it
more generally accessible, remove it from the class. Since it is
an "enum class", the values don't pollute the global namespace anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveFilter class defined the showDive() function to test
whether a dive should be filtered or not. This was used in
DiveTripModel to loop over all dives or all dives affected by
an editing action.
This restricts us in how we do filtering: We can't use indexes
that give us directly the result. To make the filtering more
flexible, move the actual loops that do the filtering to
the DiveFilter class.
The undo-commands likewise called directly the showDive()
function to check whether newly added dives are shown.
Use the new interface here as well.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Because of the multiple string confusion, we'd get the names wrong for
modechange events. If we then made other changes to the dive and saved
the end result back, they'd now be wrong in the git cloud storage too.
Fix it up manually by just noticing that there's a 'divemode' string on
the event line, which can only happen with modechange events.
Maybe we should report the fixup? This just silently fixes it (but only
for the git save format).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We had some fairly obscure rules for how strings were parsed, and it
actually caused bugs when the same line had multiple strings in it.
That normally doesn't happen, and the cases where it was _supposed_ to
happen had special cases for it (divecomputer ID lines, and tag lines).
But by mistake, we had introduced a case of that for the event line
handling in commit b9174332d ("Read and write divemode changes (xml and
git)"), and nobody realized that the divemode string addition meant that
"oops, now it's corrupting the event name". An event line could look
like this:
event 40:00 type=8 divemode="OC" name="modechange"
where we now had both that "OC" and "modechange" strings, and the code
to pick the name just picked the first string. So we'd end up
effectively mis-parsing the above line as
event 40:00 type=8 divemode="OC" name="OC"
which is obviously wrong.
The dive mode didn't really need to be a string in the first place
(there is nothing to quote, and no spaces in it), but hey, here we are.
We can't just magially fix the existing broken saves.
So make it more straightforward to handle strings in the git format line
parser. We still stash the different decoded strings together in one
special memory buffer, but now the parser helpers automatically untangle
it as they traverse the key value pairs.
This is still overly subtle code, and it doesn't fix the cases where
we've saved the wrong data back. That comes later.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If we change the gps location of a dive that didn't have a dive site associated
before (which is the normal case when a dive was just downloaded from a dive
computer), a new dive site is created with that GPS fix and added to the dive.
We need to mark that dive as changed in order for the changes to be saved to
storage.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Currently, we do substring search. Implement starts-with and
exact mode (for example when search for "Cave vs. Cavern" tags).
For each textual search criterion add a combo-box.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Corrected typo of the word celsius in three files:
core/import-csv.c
core/divefileter.h
mobile-widgets/qml/Settings.qml
These were spelled as celcius but corrected these to celsius.
The 'core files were just comments but the mobile-widgets file would be
'active' code.
Reported by: tormento <turment@gmail.com>
Signed-off-by: Jason Bramwell <jb2cool@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These just make no sense. Since the value is copied, it
has no meaning to the caller whether the function can
change the value (and vice versa for return types).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Remove two erroneous comments stating that a function-local
QSettings variable should not be static because it is initialized
too early. Scoped static variables are initialized when execution
first hits the statement.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The idea is that in portrait mode we can force the display to be single column (which
makes sure that the profile in dive display mode is nice and big).
This commit only implements the preference variable that we need for that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of transporting the global first and last dive date
in the dive summary, calculate it in an external function.
Since we already have time and date functions in qthelper.cpp
implement those functions there. Provide a stub in QMLInterface
so that QML can access these standalone functions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Some Wikipedia pages use special (non-ASCII) unicode symbols for
representing the " and ' separators. Before parsing, replace these
by the ASCII symbols to enable copy & paste from Wikipedia (and
other sources?).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
As we do XSLT parsing for the CSV import, ampersand characters need to
be encoded with & for the parsing to succeed.
Fixes#2037
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
When starting / changing the dive-site filter, inform the map of
the changed dive site selection by calling
MapWidget::instance()->selectionChanged();
This fixes a bug, where on clicking dive sites in the dive site
tab the dive sites from the *previous* click were highlighted.
Perhaps the selectionChanged() call should be put into the
setSelected() call. But the data flow between the different
parts of the dive-site and map code are so convoluted that I
don't want to risk anything!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We tend to use lower-case filenames. Let's do it for these files
as well. Simple search & replace.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Windows had it's own direct socket implementation for rfcomm (ie legacy
BT), while all the other platforms used QtBluetooth.
This makes Windows do the same thing. Hopefully modern Qt libraries now
work well enough on the Windows platform for this to work, but I can't
test it.
We can make a test build that Windows people can try, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jef has changed the libdivecomputer iostream layer and extended it in
two different ways:
- iostram's now have a 'poll()' method, which does what the name
implies: waits for data to be available with a timeout.
- iostreams now have a 'ioctl()' method, which can be used to implement
miscellaneous operations. Right now the two ones that you can do are
"set latency" (this replaces the old 'set_latency()' method) and "get
BLE name" (this replaces our 'get_name()' method that was never part
of the upstream libdivecomputer interfaces)
Neither of these is all that complicated, and the transition is fairly
obvious.
HOWEVER.
I have absolutely no idea how to do 'poll()' on Windows sockets, and I
have no intention of figuring it out. We use a direct socket interface
to implement the (non-BLE) RFCOMM bluetooth serial protocol, and I'm not
sure why Windows is so special here. I suspect - but cannot test - that
we should just switch the Windows RFCOMM implementation over to the use
the same QtBluetooth code that we use on other platforms.
I assume that the Windows Bluetooth support was originally not
sufficiently good for that, but these days we depend on Qt doing BLE for
us even on Windows, so presumably FRCOMM works too.
That would be a nice cleanup, and would make 'poll()' work on RFCOMM
under Windows too. However, since I can't test it, I've not done that,
but instead just made the Windows RFCOMM 'poll()' method always return
success. That may or may not get the thing limping along.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Simply replace it with QLatin1String. There is a tiny performance penalty,
but none of that code would care.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This replaces the C-code XML parsing with a Qt infrastructure.
QXmlStreamReader is used to parse the GPX file.
It also takes into account comments by @neolit123
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
This shouldn't be part of the desktop UI code; there's still the issue that we
really shouldn't hand code XML parsing, but I'll leave that for later.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
prefs.unit_system is set at the top, so no need to set it again.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
prefs.unit = x needs to be after the setters are called, otherwise the setter
will not do anything, and result in an inconsistency between the values stored
on disk and in prefs.units.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove string version of unit_system, duration_units, length, pressure,
temperature, vertical_speed_time, and volume, including tests and make signals
strongly typed in C++
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Register enums to allow them to be used in signal handlers instead of int.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add CLOUD_STATUS enum to interface.
Add cloud_verifification_status variable to interface, and make
it strongly typed in QML.
using backend.cloud_verification_status = 1 will fail but
backend.cloud_verification_status = backend.CS_UNKNOWN is correct.
Added note to the original definitions of the enums that they have been
duplicated.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a header file that contains a duplicate of the enums,
that are needed in QML in one class.
the unit enums are added imidiatly, since they are needed
or will be neede shortly in Settings and DivePlannerSettings
This class will also contain Q_PROPERTY and signal/slot for
variables used in QML. This is done to allow e.g.
deco_mode qPrefUnits::planner_deco_mode()
void qPrefUnits::set_planner_deco_mode(deco_mode)
as strongly typed in C++
and
DECO_MODE planner_deco_mode()
void set_planner_deco_mode(DECO_MODE)
as strongly typed in QML
Remark: wrong assignments gives errors in QML
The advantage over using strings or the value directly is that
QML detects typos and flags them as errors/warnings.
It is important to note that the class may only contain
a) a function call to the implementation
b) a reference to a global variable e.g. prefs.
Added note to the original definitions of the enums that they
have been duplicated.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The user may modify the salinity by selecting a water type from the combobox.
The new datum does not replace the existing salinity value but is stored in a
separate variable within the dive structure. If the dc-based salinity is
overwritten, there is an exclamation mark next to the modified salinity value
to indicate that the salinity has been overwritten. The dc-derived salinity can
always be recovered by selecting the "use dc" option in the combobox.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Create a checkbox in the Preferences: General screen that enables or disables
editing of the salinity data. This preference is saved with all the other
preferences.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit dbb504 tried to prevent an uninitialized dc pointer
from being dereferenced. But I screwed up the logic always
setting the event pointer to NULL. This fixes this error.
Reported-by: willemferguson@zoology.up.ac.za
Signed-off-by: Robert C. Helling <helling@atdotde.de>
When using the string setters, the original signal should still be emitted.
Change to call original setter in string setter.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When changing between METRICS <-> IMPERIAL, all type signals are emitted.
This may cause double sending of some signals, but all signals will be emitted
at least once.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When switching between imperial/metric it is important to change the single
measurements as well (e.g. METER <-> FEET).
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
All unit functions have a string version and a normal version, except
unit_system.
Make a non string version of unit_system.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There were several issues with these tests, including checking
the value argument against bool values even if the underlying
preference isn't bool.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use string literals to communicate with QML.
Instead of passing arounds enum/int value, it seems easier to pass string literals to QML and have that code respond to those
Signed-off-by: Jan Iversen <jani@apache.org>
Do not set prefs.locale_lang_locale directly, but do it
indirectly through qPrefLanguage::set_lang_locale(),
to ensure the file plist is consistent with prefs.
the difference (prefs. contra plist) cause surprises
when restarting mobile (and playing with language).
Signed-off-by: Jan Iversen <jani@apache.org>
This commit does some final cleaning up to the code, mostly deleting
white space and comments.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a tab for dive log - related preferences.
A suitable test programs is still required.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a preferences tab for dive download, allowing resetting the
buttons representing download connections in the Download panel.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove the preference settings dealing with thumbnails (currently under
General preferences and Profile preferences) and put them in a newly-created
Media preference tab.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove the "Show unused cylinders" checkbox (Profile tab) and the
"Set default cylinder" qTextEdit box (General tab) and put them in a
separate and new Equipment tab. This sounds like a simple task but,
as can be seen from the files changed, was actually a complex matter.
Adapt the existing test programs (General and TechDetails) for creating
a test program that tests parts of the Equipment tab.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
WARNING: multi directory commit, needed to secure it builds.
move the core/plannerShared.* to backend-shared.
update CMakeLists.txt to include backend-shared lib in link process.
update ios project to reflect new directory
Signed-off-by: Jan Iversen <jan@casacondor.com>
WARNING: multi directory commit, needed to secure it builds.
move the core/exportfuncs.* to backend-shared.
update backend-shared/CMakeLists.txt to generate backend-shared lib
update CMakeLists.txt to include backend-shared lib in link process.
update ios project to reflect new directory
Signed-off-by: Jan Iversen <jan@casacondor.com>
qPrefDiveplanner contains settings for ascent and descent in a neutral format.
diveplanner desktop uses a macro UNIT_FACTOR to convert between UI values and
qPref values.
In order not to dublicate these calculation (in C++ and QML) a set of shared
functions are made. The functions are identical to the calculations in diveplanner
desktop.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Add a plannerShared class, whose purpose is to contain shared
functions between mobile and desktop
This class is the inner workings of the diveplanner not the UI
Signed-off-by: Jan Iversen <jan@casacondor.com>
LOG_STP is on longer providing the data needed, since a lot of the startup
is indirectly in QML, furthermore using the xcode project and running profiler
gives much more detailed information
Signed-off-by: Jan Iversen <jani@apache.org>
Do reply->readAll() before reply-deleteLater()
With UI deleteLater() seems to happen after the function exist,
but with QML it causes problems.
Signed-off-by: Jan Iversen <jan@casacondor.com>
The uploadStatus signal can be used to inform the user about
the process e.g.
- preparing zip file
- starting actual upload
It is a suplement to uploadProgress, that only informs about
the network part.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Secure that the slots/signals in uploadDiveLogsDE, which are without
UI, can be used in DivelogsDeWebServices (to add the UI part).
Signed-off-by: Jan Iversen <jan@casacondor.com>
The difference between slot names and signal names was to insignificant
e.g. uploadFinish (signal) uploadFinished (slot).
Change slot names to slot_<name> should clear any confusion.
Signed-off-by: Jan Iversen <jan@casacondor.com>
prepareDives needs to be public, in order to be used in
subsurfacewebservices.
"friend" is another option, but that gives subsurfacewebservices
too much freedom.
Signed-off-by: Jan Iversen <jan@casacondor.com>
In order to replace DivelogsDeWebServices::prepare_dives_for_divelogs with
uploadDiveLogsDE::prepareDives, first step is to make the functions identical.
amount_selected is not maintained for mobile, add #ifdef SUBSURFACE_MOBILE
Add comment, to make code more readable
add white line to make code more readable
change to use variable ds (created a couple of lines earlier
Avoid "goto" by adding close code
Remove label and close code (it was only called in 1 place)
Signed-off-by: Jan Iversen <jan@casacondor.com>
use report_error directly, instead of making a QString first,
argument syntax are different (%s vs. %1)
Signed-off-by: Jan Iversen <jan@casacondor.com>
The implementation is based on class DivelogsDeWebServices in
desktop-widgets but without the UI entanglement
Signed-off-by: Jan Iversen <jan@casacondor.com>
Add divelogsde_userid and divelogsde_password to
qPrefCloudStorage to be used in Export.qml
Extending qPrefCloudStorage is more logical than adding QSettings
(and securing the same behaviour) outside qPref.
Signed-off-by: Jan Iversen <jan@casacondor.com>
diveshareexport wants to show the HTML received
in a positive response, so signal cannot be
compatible with diveLogsDE
Signed-off-by: Jan Iversen <jan@casacondor.com>
Add DiveShareExportDialog::do_upload() to
uploadDiveShare::do_upload(), while cleaning it from
UI.
Add signal connections as used in uploadDiveLogsDE
Signed-off-by: Jan Iversen <jan@casacondor.com>
Add diveshare/uid and diveshare/private to qPrefCloudStorage
to be used in Export.qml as well as diveshareexportdialog
Extending qPrefCloudStorage is more logical than adding QSettings
(and securing the same behaviour) outside qPref.
Signed-off-by: Jan Iversen <jan@casacondor.com>
This is the framework that mobileExecutable needs, all
prepared to move functionality from desktop-widgets
(current implementation) into a shared version.
Signed-off-by: Jan Iversen <jan@casacondor.com>
The old code called directly into the DiveListModel. Instead,
send a signal and hook into the signal from the model. This
will allow us to remove the DiveListModel::instance() function.
This, in turn, is a step towards supporting multiple models
at the same time. However, currently the model manually
sets the hidden_by_filter flag in the core and therefore
only one active model is supported at a time.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, selecting a single dive or deselecting all dives was
quite awkward: One had to pass in a single-dive vector and the
dive itself (as current dive). Provide a convenience function
that selects a single dive or deselects all dives if null is
passed in.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Q_PROPERTY contains an internal ";", making clang produce a warning
when ending the line with a ;
Remove ; at the end of Q_PROPERTY lines.
Signed-off-by: Jan Iversen <jani@apache.org>
Currently, the caller is responsible for not reusing a freed
weightsystem / cylinder or resetting the description field to
null. This is very unfriendly. Set the description field to null,
because that allows us to call free_* repeatedly on the same
object. Use the new behavior to make the weightsystem model code
a bit cleaner.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Implement the EditWeight undo command. Since there is common code
(storage of the old weight), this creates a common base class for
RemoveWeight and EditWeight. The model calls directly into the undo
command, which is somewhat unfortunate as it feels like a layering
violation. It's the easy thing to do for now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of freeing internal data of the weightsystem structure,
call the free_weightsystem function (which has to be made extern
at first). This makes things more future-proof, should the
weightsystem struct ever be extended.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To make things more future-proof, introduce an empty_weightsystem
constant. Replace explicit aggragate initialization of empty
weightsystems by this constant.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This one is a bit more complicated than weight adding, because the
multiple-dive case is not well defined. If multiple dives are selected,
this implementation will search for weights that are identical to the
weight deleted in the currently shown dive. The position of the weight
in the list is ignored.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Introduce an AddWeight undo command. This is modelled after the
numerous dive-edit undo commands. The redo and undo actions are
connected to the WeightModel via two new signals, weightAdded
and weightRemoved.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
DiveFilter is not available in Mobile, so another solution
is needed.
Use "for_each_dive_site" to loop over dive sites instead.
Signed-off-by: Jan Iversen <jan@casacondor.com>
The DiveListView has a function to select the first dive. Move
this to the core to be able to call it from all parts (not only
desktop) of the code.
Currently, this has a (small?) UI regression: when filtering dives
and no selected dive is visible anymore, the old code would select
the first dive in the list. The new code selects the newest dive,
which might not be the first if some sort-criterion is active.
To revert to the old behavior, it will be necessary to move the
sorting function likewise to the core.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since we now have a selection.c translation unit, put the selection-
related functions there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The file command_private.cpp had functions concerning selections
only. To make these functions accessible from outside the undo
machinery, turn it into a part of the core-library. Currently,
only C++ functions are exported. We might think about also
exporting a C interface.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
desktop-widgets/divelogexportdialog.* contains both the desktop
dialog as well as the "real" export functions.
Create a class to be shared between desktop and mobile
Copy the export functions 1-1 from divelogexportdialog.* of course
changing class names.
saveProfile is highly dependent on the UI, so the implementaion will
be done in each UI directory (desktop-widgets, mobile-widgets).
Remark this commit just add the copied functions, in order to secure
nothing is broken.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Add the export of environmental parameters in star widgets to .html format. The
dive rating is always shown both in the condensed as well as in the expanded
view. The other five environmental variables are only shown in the expanded
view. Only those star widgets with a rating are shown: if a star widget has not
been rated in the UI, then it is assumed unrated and is not indicated in the
expanded view.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Provide file I/O for those star widgets that are enabled. The values of the
widgets can be stored to and read from either xml or git.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Connect the UI to the underlying dive structure. Enable proper initialisation
and management of star widgets while Information tab is active. Enable undo for
the addtional star widgets.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Create a preference setting on the General Settings page. The setting is saved
with the other preferences.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As per request from users on scubaforum.com, this adds
the current gradient factor to the deco information of
the infobox. Up to now, this information was only
graphically represented in the pressure bar graph
and the heatmap. This gives a numerical value.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Add flag to subsurface_mobile (only when compiling for desktop)
to allow using qml files from disk instead of resources.
This allows testing qml changes with just restarting subsurface_mobile.
Signed-off-by: Jan Iversen <jan@casacondor.com>
The code seemed to do something really reasonable by picking one of the
supported OSTC versions - except that the one it picked didn't support
BT/BLE and therefore our logic of recognizing dive computers on iOS
failed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I was reminded to do this when a user in French speaking Switzerland reasonably
suggested that fr_FR would be a much better fallback than en_US in their
situation.
Fixes: #2388
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The way this was accessed via Qt's model semantics was horrible.
This gives arguably more readable code, since we don't have to
shoehorn things through QVariants.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Split out the actual filtering from the MultiFilterSortModel.
Create a DiveFilter class that does the actual filtering.
Currently, mobile and desktop have their own version of this
class, though ultimately we may want to merge them.
The idea here is that the trip-model and undo-commands have
direct access to the filter-function and thus can take care
of keeping track of the number of shown dives, etc.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The filter-model was catching dives-added / dives-deleted signals
from the models to keep track of the number of shown dives.
To simplify the data flow, do this directly in the undo-command.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We mark hidden/shown dives in the core but store the number
of shown dives in the MultiFilterSortModel. Move this datum
to the core for improved locality.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
According to the man page, fopen and fclose return
the error number in the global variable errno.
Fixes CID 350115
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This fixes another thing Coverty found. I am not 100% sure
I understand the semantics of cylinder_t.manually_added
but looking at other instance I guess true is the correct
value for a cylinder from a csv file for a Poseidon
rebreather.
Fixes CID 350734
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Coverty found that in the export functions, we initialize
the planner deco state with NULL and then possibly later
access its content. This makes sure, we don't do that.
Let's see if this makes Coverty happy or I missed somehting
else.
Fixes CID 350736
Fixes CID 350735
Signed-off-by: Robert C. Helling <helling@atdotde.de>
It makes no sense to have a non-NULL current_dive once all dives
have been deleted. Therefore, clear current_dive implicitly in
clear_dive_file_data() and don't depend on the caller performing
this.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In get_gas_used() the use was left uninitialized if there are neither
user- nor computer-supplied values. This gives random SACs in the UI.
Initialize to 0.
Fixes#2376.
Reported-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The determination of minimum pressure in calculate_max_limits_new()
in profile.c was wrong for a long time. Since the loop went over all
cylinders (even unused ones), the minimum pressure was always zero.
Since we loop only over used cylinders, the minimum pressure was
initialized to the lowest starting pressure of any cylinder.
If there were no events with pressure change, the minimum pressure
stayed unchanged, resulting in a funky scaling.
Instead, let's initialize the minimum pressure to the lowest ending
pressure.
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When parsing of a timestamp failed (shouldn't happen) set the
timestamp to zero. This should give less unpredictable results
and silence a compiler warning.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of accessing the cylinder table directly, use the get_cylinder()
function. This gives less unwieldy expressions. But more importantly,
the function does bound checking. This is crucial for now as the code
hasn't be properly audited since the change to arbitrarily sized
cylinder tables. Accesses of invalid cylinder indexes may lead to
silent data-corruption that is sometimes not even noticed by
valgrind. Returning NULL instead of an invalid pointer will make
debugging much easier.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The cylinderList() function collects all cylinder descriptions.
Instead of adding all cylinders, then sort, then removed duplicates,
keep a sorted list and only add non-existing elements. Find
existing elements by a binary search.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The tab was crashing if there were no cylinders because
1) per_cylinder_mean_depth() would access non-existing cylinders.
2) TabDiveInformation::updateProfile() would access a non-existing
mean.
Fix both of these crash conditions by checking whether the dive
actually has cylinders.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In getFormattedWeight() and getFormattedCylinder(), the indexes
were passed as unsigned ints. This makes no sense as the only
callers were using signed ints. Change the parameters to signed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
As a convenience, return the cylinder from add_empty_cylinder()
to spare the caller from the nasty expression to fetch the
last cylinder.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Most callers of this function accessed the newly generated cylinder
immediately after calling this function. Thus, for convenience,
return the added cylinder. This avoids a number of verbose expressions.
On the flip side, cylinder_start() now has to be cast to
function returning void in a the "nesting" function table.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of using fixed size arrays, use a new cylinder_table structure.
The code copies the weightsystem code, but is significantly more complex
because cylinders are such an integral part of the core.
Two functions to access the cylinders were added:
get_cylinder() and get_or_create_cylinder()
The former does a simple array access and supposes that the cylinder
exists. The latter is used by the parser(s) and if a cylinder with
the given id does not exist, cylinders up to that id are generated.
One point will make C programmers cringe: the cylinder structure is
passed by value. This is due to the way the table-macros work. A
refactoring of the table macros is planned. It has to be noted that
the size of a cylinder_t is 64 bytes, i.e. 8 long words on a 64-bit
architecture, so passing on the stack is probably not even significantly
slower than passing as reference.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Thus, future callers will not have to include the monster dive.h
include if they just want to copy cylinders.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move the loop body of copy_cylinder_types() into its own function.
When using variable sized arrays, this loop will have to treat two
cases (overwrite cylinder and add new cylinder), so that makes things
more clear.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
merge_cylinders() used three bitmaps to identify cylinders used in
the first and second dive and matched cylinders. Even though nobody
will use more than 32 (or 64!) cylinders, replace these with
dynamically allocated bool-arrays for consistency with the rest
of the code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When calculating per-cylinder mean depths, bitfields were used to
keep track of "used" and "known" cylinders. Even though no sane
person will use more than 32 cylinders, turn this into dynamically
allocated arrays of bool for consistency with the rest of the code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To calculate sac rates, an array of used gases for every point on the
profile was used. This was implemented using unsigned int bitfields.
While nobody sane will ever use 32 or even 64 cylinders, for consistency
with the rest of the code, also change this to use dynamically
allocated arrays.
But allocate only once per shown profile, not once per sample.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
All accesses to the pressure data were converted to use functions.
Therefore it is now rather trivial to dynamically allocate the
pressure array and just change the functions.
The only thing to take care of is the idiosyncratic memory
management. Make sure to free and copy the buffer in the
appropriate places.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The save_profiles_buffer() function was accessing the pressure
data directly. Instead, use the already existing funcions to
make transition to dynamically allocated pressure data more
seamless.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The pressure data was directly accessed in fill_missing_tank_pressures().
Use the already existing functions so that the structures can be adapted
easily.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The only apparent reason that this was a macro is that it automatically
increased the "index" and "entry" counts. But incrementing these explicitly
seems reasonable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Continue with replacing pointers to struct plot_data entries
by indexes. Thus the pressure data can be kept in its own
array and can by dynamically sized.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The goal here is to make it possible to detach the pressure related
data from the plot_info structure. Thus, the pressure related data
can be allocated independently depending on the number of cylinders
per dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Dynamically allocate cylinder arrays in C code. This is a tiny
step in removing the MAX_CYLINDERS limitation.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
get_gas_used() returns the volume of used gases. Currently,
an array with MAX_CYLINDERS is passed in. If we want to make the
number of cylinders dynamic, the function must use an arbitrarilly
sized array.
Therefore, return a dynamically allocated array and free it
in the caller.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Memory is cheap these days. Still, this was wasteful. On a 64 bit machine we
went from 1620 to 1592 bytes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When displaying segment or stop times in the planner notes, we always
round to the next full minute. This can mean for example that we
round down more often than rounding up with the result that the sum
of the segment times does not match the total runtime and can for example
lead to stops that are shown with 0min duration.
With this patch, we increase the reference time of the last display only
by the duration time actually shown. This way, the rounding errors don't
accumulate but having rounded down previously makes rounding up the next
time more propable.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
When computing the best mix for a target depth, for helium, one
can either require that the partial pressure of N2 is the same
as at the target depth or the partial pressure of N2 plus O2.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
We should call this function with two well defined dive_or_trip structures
which means that exactly one of the two values is set in each argument. But
in order to not have bugs elsewhere leed to crashes here, be more tolerant
of malformed argumnts.
Fixes CID 350100
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should never happen based on the logic in the callers, but just
to be on the safe side.
Should fix CID 350128
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The native buffer of a membuffer is not NUL-terminated, so when you want
to detach it and use it as a C string, you had to first do
'mb_cstring()' that adds the proper termination/
This was all documented in the header files, and all but two users did
it correctly.
But there were those two users, and the exported interface was
unnecessarily hard to use. We do want the "just detach the raw buffer"
internally in the membuffer code, but let's not make the exported
interface be that hard to use.
So this switches the exported interface to be 'detach_cstring()', which
does that 'mb_cstring()' for you, and avoids the possibility that you'd
use a non-terminated memory buffer as a C string.
The old 'detach_buffer()' is now purely the internal membuffer
implementation, and not used by others.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This seems excessively unlikely to actually fail. SEEK_END works, but SEEK_SET
fails? Oh well. Belts and suspenders.
Found by Coverity. Fixes CID 45039
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This prevents a resource leak.
Found by Coverity. Fixes CID 350080
The commit also includes some tiny whitespace/empty line fixes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I missed one file fixing this earlier.
Since we never did anything with the error string, why even ask for it.
And this way we don't have to deal with the memory returned, either.
Found by Coverity. Fixes CID 350082
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we never did anything with the error string, why even ask for it.
And this way we don't have to deal with the memory returned, either.
Found by Coverity. Fixes CIDs 350124, 350113, 350106, 350099, 350091
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Even if there is a valid trip, we should not add a structure that isn't
a dive to it.
Found by Coverity. Fixes CID #350073
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Free resources allocated by alloc_dive() with free_dive().
Don't allocate and re-allocate a fixed two byte buffer on the heap.
Indirectly this fixes CID 216616
Suggested-by; Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While this is debatably correct, free will happily accept (and ignore
the NULL pointer), so let's just always call it and make Coverity happy.
Fixes CID 45163
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The divesEdited signal sends the changed field as a parameter.
Since some undo-commands change multiple fields, this led to
numerous signals for a single command. This in turn would lead
to multiple profile-reloads and statistic recalculations.
Therefore, turn the enum into a bitfield. For simplicity,
provide a constructor that takes classical flags and turns
them into the bitfield. This is necessary because C-style
named initialization is only supported on C++20 onward!
Is this somewhat overengineered? Yes, maybe.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The undo system sets updates individual dive fields on
redo respectively undo. Make salinity such a field, since
it is changed on replanning a dive.
To do this, break out the "update salinity" functionality
into its own function, add an entry to the DiveField enum
and add the corresponding switch-case.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive-computer freeing code was local to dive.c. Implementing
the replan undo-command will need that functionality. Therefore,
export it as a global function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
At least in one of the logs we saw there seemed to be trailing spaces.
It should be enough for the BT name to start with "Mares Genius" in
order to be recognized.
Suggested-by: Jef Driesen <jef@libdivecomputer.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't have the "show all dive computers" logic on mobile, so we need
something like this.
Possibly we should use the libdivecomputer matching code if it exists,
but that's a much bigger change, let's do this incremental one for now.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We'll use them from the model in order to avoid creating this many
DiveObjectHelpers when showing a dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is disabled by default - but when compiled in it makes it a lot
easier to pinpoint why we are creating so many DiveObjectHelpers.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old server certificates where not recognized on some older platform,
so we hardcoded the hex digest of the valid certificate and ignored the
error.
Those certificates have been replaced last week, so there is no point to
this hack anymore - also, we should always show the SSL error, not just
in verbose mode.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit df4fbf7699 ("Android: force different font on OnePlus devices")
inadvertantly added this hunk - let's undo it again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The test if we have to create gas switches wasn't yet aware
of the bailout option.
Reported-by: Dennis Arreborg <dennis@arreborg.eu>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The DiveImportedModel and DownloadThread used the same table
of dives and dive sites. This made it very hard to keep the
model consistent: Every modification of the download thread
would make the model inconsistent and could lead to memory
corruption owing to dangling pointers.
Therefore, keep a copy in the model. When updating the model,
use move-semantics, i.e. move the data and reset the tables
of the thread to zero elements.
Since the DiveImportedModel and the DownloadThread are very
tightly integrated, remove the accessor-functions of the
dive and dive-site tables. They fulfilled no purpose
whatsoever as they gave the same access-rights as a public
field.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Even though the returned dive is not const, the table is not
changed, as it only contains pointers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To allow efficient moving of downloaded dives from the download
thread to the model, implement a general move function that
moves table data. Instantiate that function for the dive and
dive_site tables.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The way we handle singletons in QML, QML insists on allocating the
objects. This leads to a very idiosyncratic way of handling
singletons: The global instance pointer is set in the constructor.
Unify all these by implementing a "SillySingleton" template. All
of the weird singleton-classes can derive from this template and
don't have to bother with reimplementing the instance() function
with all the safety-checks, etc.
This serves firstly as documentation but also improves debugging
as we will now see wanted and unwanted creation and destruction
of these weird singletons.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To make it easier to pass around trips through QML, give each trip
a unique id. The id is generated in alloc_trip() and uses the same
function to generate unique dive ids.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When exporting dive sites, the dive sites to be selected were collected
in the C-core. But that doesn't have access to the selected dive sites
if in dive site mode. Therefore, collect the dive sites in C++ and
pass down to the core. Use a std::vector to avoid memory management
woes.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
is_dive_site_used() had a "selected" parameter. If true it would
return whether the given dive site had a selected dive. Turns
out all callers had this parameter set to true. Therefore, replace
by a simplified function without the "selected" parameter and
give the function an appropriate name.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is working around a Qt Bug https://bugreports.qt.io/browse/QTBUG-69494
which prevents correct rendering of the OnePlus fonts.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The cylindersObject list was only used by grantlee but not by
the mobile code. Since it is quite heavy, split it out and thus
don't generate it for every dive on mobile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of handing a reference-to-dive to QML, prerender all the needed
properties and store them as values in DiveObjectHelper. Exception:
- date(): generated from timestamp
- time(): generated from timestamp
- cylinderList(): does not depend on dive anyway and should be made
static.
This hopefully avoids the random mobile crashes that we are seeing.
Clearly, this code needs to be optimized, but it is a start.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
