The intent of the code was to check that there is a string and it has at least
two characters. Since iter is the result of a strchr(iter, '|') call, we
know that if iter isn't NULL, iter[0] is '|', so we only need to check the next
character.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
try_to_xslt_open_csv() re-allocates the memory passed in (not really great as
far as design goes, maybe something that should be reimplemented). Doing
pointer arithmatic with the returned base pointer results in garbage, unless
one gets super lucky and the realloc manages to not move the memory.
It's a wonder this ever worked.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Before making the cylinder-table dynamic, dives always
had at least one cylinger. When such a dive is displayed,
the TabDiveInformation class calls per_cylinder_mean_depth().
If there are no samples, this function generates a "fake
profile" with fake_dc(). Thus, effectively dives always
had samples once the user was displaying them.
When the cylinder-table was made dynamic, dives without
cylinders were supported. This can notably happen, when
importing from CSV (this could actually be a bug).
per_cylinder_mean_depth() exits early in that case and
doesn't create a fake profile. This lead to crashes
of the profile-widget, which were fixed in 6b2e56e513.
Non-sample dives were now shown with the Subsurface-logo.
To restore the previous behavior, genarate a fake profile
for sample-less dives in fixup_dive(), which is called
anytime a dive is loaded or imported. This seems to
have been the intention anyway and this worked only
"by chance". This will make a few fake_dc() calls obsolete,
but so be it.
Since fake profiles are now generated on loading,
the parse-tests need to be fixed to account for that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Otherwise we end up with nonsensical values which lead to a division by zero,
which in return leads to different results, depending on platform.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When merging two dives, the higher CNS value was taken. This could
result in inconsistent CNS values if two dives were merged where
one dive's CNS was calculated from a "fake profile", i.e. a dive
without dive-computer profile. In that case, the most conservative
value (all time spent at the bottom) was assumed. The merged dive
then consisted of the dive-computer profile and the conservative
CNS estimate.
This is fixed by setting the CNS value to "0" after merging,
which means "unknown". The correct value will then be recalculated
in "fixup_dive" from the actual sample data.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The data of the membuffer is passed as a data/length pair
to xmlReadMemory(). There is no point in NUL-terminating it.
Moreover, pass the data directly to xmlReadMemory()
instead of via variables. These variables are reused
later with a different meaning, making this super-confusing.
The membuf variable is turned from "const char *" to "char *"
to signal that we own the buffer.
Amazingly, zip_source_buffer() frees the buffer, even though
a "const void *" is passed in. This API is pure madness. Add
a comment.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There is a function to format QString with C-format strings. Let's
use it instead of doing a detour via membuffer.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Thus, the membuffer data is automatically freed when going
out of scope - one thing less to worry about.
This fixes one use-after-free bug in uploadDiveLogsDE.cpp
and one extremely questionable practice in divetooltipitem.cpp:
The membuffer was a shared instance across all instances
of the DiveToolTipItem.
Remves unnecessary #include directives in files that didn't
even use membuffer.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
C-style memory management is a pain and nearly nobody seems to get
it right. Add a C++-version of membuffer that frees the buffer
when it gets out-of-scope. Originally, I was thinking about
conditionally adding a constructor/destructor pair when compiling
with C++. But then decided to create a derived class membufferpp,
because it would be extremely confusing to have behavioral change
when changing a source from from C to C++ or vice-versa.
Also add a comment about the dangers of returned pointer: They
become dangling on changes to the membuffer.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The sensor-id in the sample struct was a uint8_t, with all
the known problems of unsigned integers. In the rest of the
code cylinder ids are signed integers. To avoid confusion,
make it a signed int. int8_t should be enough (max. 127
cylinders). To allow for degenerate cases, use an int16_t.
16k cylinders should be enough for everyone.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The changes in commit 4daf687876 ("profile: remove [disable|enable]Shortcuts()
signals") resulted in us no longer enabling the shortcuts on the desktop (at
least on macOS where I debugged this). This placement of the call feels like a
bit of overkill, but at least it shouldn't be wrong.
Fixes#3293
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There were two function-static variables in ToolTipItem::refresh(),
which is a very scary proposition. Curently, there is only
one ToolTipItem, but this may change on mobile, where there
are multiple profiles at the same time.
Remove this timebomb and make the two objects subobjects.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The code will happily perform out-of-bound accesses if
pressure-sensors refer to non-existing cylinders. Therefore,
sanitize these values in fixup_dive(), which is called
everytime a dive is loaded or imported.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
By default, the parser would create samples with cylinder
ids 0 and 1. This creates out-of-bound accesses for the
common one-cylinder (or even no-cylinder) dives. These
were harmless when the cylinder-table was of a fixed size.
Since changing to a dynamic cylinder-table, these became
actual out-of-bound accesses. Don't create such samples
in the parser.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The sensor member of sample refers to a cylinder from which
the pressure was read. However, some dives don't even have
a cylinder. Therefore, introduce a special NO_SENSOR value
for these dives. Since the cylinder is given as a uint8_t,
0xff seems to be a sensible choice.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When user has selected to show unused cylinders in equipment tab,
respect this setting when exporting to divelogs.de.
Fixes#3277
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
It appears that this well intended change in commit 52aa7d83b6 ("Increase event
icon size in print mode") actually causes the scaling of the event icons to be
generally wrong. This removes the hard 4* scaling and also adds some debugging
output in verbose mode.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This variable is not used outside a single function, where it
is reset every time the function runs. This can be realized by
a function-local variable just as well.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We simply don't use release candidates in Subsurface these days, and no one
then moves these builds to stable after testing, so stable has been getting
stale while the builds that people SHOULD use have been sitting in candidate.
Of course, this will only become the default after our next release (as I don't
want four digit versions in a release build, so I can't simply add this to our
snap-stable branch).
Oh well - 5.0.3 will happen soon, given the print resolution issue for icons.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When printing with low DPI, the dive event items become comically
large, because they are not resized like the fonts. Therefore,
scale using the fontPrintScale.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This occurs upon importing dives for example via CSV.
Make sure the profile display is cleared when selecting
such a dive rather than showing a different dive.
Allow editing the profile for such a dive.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This enum was an artifact from the primordial days of the profile
widget. As far as I can see it was never used.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The ADD state is not used for adding dives since adding dives
was made undoable. Therefore, rename it to EDIT state, since
that is what it is used for.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Clearly, this comment got lost in code reshuffling, as it comments
about ADD and PLAN mode, but is in front of picture declarations.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The code was downcasting the QGraphicsScene to ProfileWidget2,
but then didn't use the result. *shrug*
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The axes of the profile are setup when switching into
the "ProfileState" and also when the preferences are
changed. The same code existed twice for both cases.
Let's factor it out into a single function to avoid
future divergence and confusion.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveEventItem had an internal copy of the event. It passed
that copy to the undo-machinery, which of course didn't work.
Simply keep a pointer to the event. All changes to a dive no
pass via the undo-machinery, which causes a reload of the profile,
so this should be safe.
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Firstly, there is no point in supporting DiveEventItems without
model and axis. Secondly, this avoid pointless position-
recalculations.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There is no point in having a dive event without an event.
Let's pass the event at construction time to avoid having
to handle "invalid" events.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add numerus translation lookup for the right-click context menu in the dive
list to show proper singular/plural text.
Fixes#3256
Signed-off-by: Mark Stiebel <mark@aretha.stiebel.me>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Asciidoc appears to insert './images' references when using the admonitionblock.
Clean that up in the post processing of the user manual for HTML.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
