This patch creates the possibility of viewing the individual sensor
values when the po2 button on the profile toolbar is activated. This
follows exactly the procedure for optionally displaying the setpoint
values while viewing po2. A checkbox in the preferences panel determines
whether sensor information is shown. By default it is set to OFF. When
checked, and the po2 button is activated, sensor1 values are shown in
grey, sensor2 in blue and sensor3 in brown.
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When a CCR dive is viewed and the toolbar button for PO2 is activated,
both the PO2 (green line) and the O2 setpoint (red line) are shown.
This allows evaluation of the PO2 in the CCR loop with respect to the
pre-configured O2 setpoint.
The setpoint graph can be disabled from the Preferences/Graphs tab
by checking the appropriate checkbox.
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
All Facebook related stuff now is on SocialNetworks.h/cpp
this makes it much easier to implement things and looking
for bugs.
working:
- logging in
- getting user id
- getting album id ( or creating it )
*much* more testing is needed, of course.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Calculations for passive semi-closed rebreathers are pretty much like OC
except the pO2 is lower bey a certain (SAC dependent) factor. This patch
introduces the corresponding calculations in case dctype == PSCR which is
so far never set and there is currently no UI for these calculations. As
pO2 is SAC dependent it takes a certain attempt at getting it and drops to
defaults from the prefs otherwise.
As there is no UI at this point and I also don't have any dives, this has
not received much testing, yet, but it compiles. At least.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a toolbox icon to turn on a tissue plot inspired by the bar
graph of the Sherwater Petrel,
It shows the inert gas partial pressures for individual compartments. If
they are below the ambient pressure (grey line) they are shown in units of
the ambient pressure, if they are above, the excess is shown as a
percentage of the allowed overpressure for plain Buehlmann. So it has the
same units as a gradient factor. Thus also the a gradient factor line (for
the current depth) is shown.
The different tissues get different colors, greener for the faster ones and bluer
for the slower ones.
Positioning and on/off icon action still need some tender loving care.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order to get rid of the old default font on Windows (Calibri) we are
going to near ridiculous length. The reason for this is that we in the
past always saved the default font in the settings (how stupid was that!)
and so now even with a new default font in place, since there is an
explicit font in the settings we take that instead of the default.
Instead of requiring our existing users to use a registry cleaner to get
the correct default font on Windows 7 and later (the VAST majority of our
Windows users at this stage), we simply explicitly ignore that old default
font.
There is one very nasty side effect. A user cannot set Calibri as their
font of choice on Windows 7 or later (because we always force them back
onto Segoe). Given how much nicer Segoe looks I think this is an
acceptable flaw - let's hope this doesn't come back to bite me in the
future.
At the same time this changes the default font size handling. We try to
get the default font size of the OS so the app looks "right". This seems
to not give me the expected result on Linux with KDE, but maybe I'm doing
it wrong? Looks good when testing on Windows.
See #712
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This breaks compatibility with old preferences, but it's a single
key and not that very important so I don't think it's a bigger issue
I've renamed prefs.animation to prefs.animation_speed to denote
that it's a value, and not a state.
Also, fixed the places that were treating it as a state (on/off)
to treat it like a correct value.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The values for drop_stone_mode, bottomsac, and decosac are typically the
kind of personal data specific to a diver that is unlikely to change
from one dive plan to the next.
This patch stores/restores them to/from the preferences file. For this,
it adds bottomsac and decosac to the prefs structure; drop_stone_mode
was already there, though not stored/restored.
Signed-off-by: Gaetan Bisson <bisson@archlinux.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added a 'Use default file' button on preferences in a way
that doesn't clutters the interface.
Fixes#630
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This seems to be needed for the correct print of the profile,
What was happening on the print code was that the profile even in print
mode was doing animations, and we were getting a frame of it and trying to
print it.
Also, a bit of code cleanup.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds the toggle picture button and hoocks
it up with the rest of the code. I'v also changed a call
from ProfileWidget because it caused errors on the ui
generated code, where it would try to call an still-to-be
instantiated object.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There is no reason to treat drop_stone_mode different from the rest of
the planner settings, so move it to our prefs structure.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the corresponding checkbox is checked the planner does interrupt
pure O2 deco after 12min for 6min on cylinder 0.
To make this work for air I removed the gasmix_is_null logic.
I guess that makes the planner feature complete for the next release.
[Dirk Hohndel: trivial merge into latest master]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Too much noise on the headers, this commit remove uneeded
headers when they are uneeded.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
That provides some UI elements that were recently introduced with function
of allowing the ascent rates of the planner to be configured by the user.
I tried to make it work both with senisble as well as with imperial units.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Lets just use pO₂ instead of PO2, ppO2, ppO₂, PO₂.
They all mean the same, but it's better to be
consistent
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a preferences setting, it should belong to the preferences
structure.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
-Renaming prefs members for consistency.
-Changing references of QSettings to the prefs structure instead.
-Removing unused functions in pref.h were left over from an old version.
-Changing the data-type of bool members to short for consistency with other members.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adds new push button "HR" to the button bar on the dive profile to
toggle display of heart rate.
TODO: New icon for the heart rate button is needed.
Fixes#485
Signed-off-by: Lakshman Anumolu <acrlakshman@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When doing some changes in the preference window and clicking "Apply", the
'Close without saving' button is supposed to restore the previous values.
However some fields were not restored correctly.
- The Animations Slider was never restored to its initial value.
(A new member in the pref struct was added - pref.animation)
- The 'Font' and 'Font size' were restored correctly to the previous
values but their effects weren't restored to the UI and that required to
open the prefrences window again and press ok.
Fixes#481
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Currently the feature to show temperature units while adding dive is
provided through checkbox in preferences->units section. This patch
disables this checkbox and always enables this feature.
Signed-off-by: Lakshman Anumolu <acrlakshman@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add additional check box in "preferences->graph" section that allows
users to hide average depth on dive profile.
By default this option is checked to show average depth.
Fixes#475
Signed-off-by: Lakshman Anumolu <acrlakshman@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We didn't care about system default fonts and sizes, we just used the Qt
default font.
Due to how QFont is constructed, there was need to split font and font
size.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Currently when user wants to add a new dive information,
the ways to know what unit system is being used are
- Through preferences panel.
- Save the dive information, which displays units in
the text field.
This patch provides an option to the user to show current
unit system by displaying the unit on the side of the label
when the user is editing the fields.
This feature can be enabled or disabled by using the new
checkbox option i.e. `Show units in text labels` included
in `preferences->units` section.
Signed-off-by: Lakshman Anumolu <acrlakshman@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I know everyone will hate it.
Go ahead. Complain. Call me names.
At least now things are consistent and reproducible.
If you want changes, have your complaint come with a patch to
scripts/whitespace.pl so that we can automate it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes the 'Zoomed Plot' a preference that can be stored and
retrieved, this way if the user sets the plot to be 'zoomed', this
information will persist even if they closed or opened subsurface again.
Also, added the 'Scale' button on the new profile, but didn't did the glue
code yet.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* ensure include guard to every header
* comment endif guard block
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some dive computers will always download all tanks that they store, not
just the ones used in a dive. Most people only want to see the tanks that
they actually used during the dive (and for the others there's an option
to go back to the old behavior, just in case).
All this is only in memory / during runtime. If the dive computer provided
the extra data we will not throw it away.
Fixes#373
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't do anything with this just yet.
And frankly, a drop down of the cylinders that we know of would be even
better. But hey, it's a start.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the Gtk version there were no option to disable the showing of time
in the mouse over, so this removes that option to limit the amount of
clutter in the settings panel.
This also renames the time and temperature to match the names they used
to have. T -> @, Temp -> T
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Let the user choose if the calculation of ndl and tts is worth the time
it takes.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is really nice to have when looking at specific parts of a dive.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Those preferences removed ( basically the ones about visibility of
the List View of the Table ) are now managed by the Qt Settings
system, and thus there's no need to have them there. wich gave us
a pretty good cleanup.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This is really nice to have when looking at specific coutures of a dive
or events.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I think that displaying tissue loadings either as pressure or as
percentages is not very intuitive but that it makes much more sense when
translated to ceiling depths.
This change enables just that for the 16 tissues in our calculated ceiling
and visualizes this in the profile graph.
There is a checkbox in the preferences to turn this on. If enabled, all
tissues having non-trivial ceilings are also shown in the info box.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The biggest problem here was that bool has different sizes in C and C++
code. So using this in a structure shared between the two sides wasn't a
smart idea.
Instead I went with 'short', but that caused problems with Qt being to
smart for its own good and not doing the right thing when dealing with
'boolean' settings and a short value. This may be something in the way I
implemented things (as I doubt that something this fundamental would be
broken) but the workaround implemented here (explicitly using 0 or 1
depending on the value of the boolean) seems to work.
I also decided to get rid of the confusion of where gflow/gfhigh are
floating point (0..1) and when they are integers (0..100). We now use
integers anywhere outside of deco.c.
I also applied some serious spelling corrections to the preferences
dialog's ui file.
Finally, this enables the code that selects which partial pressure graph
to show.
Still to do: font size, metric/imperial logic
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
After the 3.1 release it is time to shift the focus on the Qt effort - and
the best way to do this is to merge the changes in the Qt branch into
master.
Linus was extremely nice and did a merge for me. I decided to do my own
merge instead (which by accident actually based on a different version of
the Qt branch) and then used his merge to double check what I was doing.
I resolved a few things differently but overall what we did was very much
the same (and I say this with pride since Linus is a professional git
merger)
Here's his merge commit message:
This is a rough and tumble merge of the Qt branch into 'master',
trying to sort out the conflicts as best as I could.
There were two major kinds of conflicts:
- the Makefile changes, in particular the split of the single
Makefile into Rules.mk and Configure.mk, along with the obvious Qt
build changes themselves.
Those changes conflicted with some of the updates done in mainline
wrt "release" targets and some helper macros ($(NAME) etc).
Resolved by largely taking the Qt branch versions, and then editing
in the most obvious parts of the Makefile updates from mainline.
NOTE! The script/get_version shell script was made to just fail
silently on not finding a git repository, which avoided having to
take some particularly ugly Makefile changes.
- Various random updates in mainline to support things like dive tags.
The conflicts were mainly to the gtk GUI parts, which obviously
looked different afterwards. I fixed things up to look like the
newer code, but since the gtk files themselves are actually dead in
the Qt branch, this is largely irrelevant.
NOTE! This does *NOT* introduce the equivalent Qt functionality.
The fields are there in the code now, but there's no Qt UI for the
whole dive tag stuff etc.
This seems to compile for me (although I have to force
"QMAKE=qmake-qt4" on f19), and results in a Linux binary that seems to
work, but it is otherwise largely untested.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This started out as a way to keep dives in the dive list but being able to
mark them as 'invalid' so they wouldn't be visible (with an option to
disable that feature).
Now it supports an (at this point, fixed) set of tags that can be assigned
to a dive with 'invalid' being just one of them (but one that is special
as it gets some additional support for hiding such dive and marking dives
as (in)valid from the divelist).
[Dirk Hohndel: merged with the latest code and minor changes for coding
style and consistency. Ensure divelist is marked as
modified when changing 'invalid' tag]
Signed-Off-By: Jozef Ivanecký (dodo.sk@gmail.com)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Rename gtk-gui.c to qt-gui.cpp, and make the necessary changes so that
the project still builds.
Signed-off-by: Alberto Mardegan <mardy@users.sourceforge.net>
Not all of the providers seem to work for me (Yahoo Satellite doesn't
appear to give me any data), but for now I'll leave most of them in.
We can later decide to offer only some of them.
It might be more fun to be able to pick the provider directly from the map
widget. But for now I kept this in the preferences which seemed to be a
good place for it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit has gone through a few iterations and I trimmed it down to
what I consider the "conservative minimum" - so this only stores window
size, not window position. And in my mind that's the more relevant part,
anyway. Have your window manager position the window at a "smart" spot on
your screen...
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
