Add support for tracking the gas usage across multiple tanks to the 'bar
used' and SAC values shown for the profile ruler.
The following rules are implemented:
- a tank is considered 'used' if at least one bar has been consumed;
- only used tanks are taken into account for calculations;
- 'bar used' is only shown if all tanks used have the same (or unknown)
volume;
- SAC is only shown if all tanks used have a known volume.
Fixes#3902.
Reported-by: @pabdakine
Signed-off-by: Michael Keller <github@ike.ch>
It's possible for the first sensor to start with a pressure
significantly lower than other sensors.
Signed-off-by: Michael Andreen <michael@andreen.dev>
This tries to encapsulate the management of the current dive and
divecomputer in the selection code. The current dive is alreay
set by setSelection(). Add a new parameter to also set the
current divecomputer. If -1 is passed, then the current
computer number is remained. This will allow us to audit the code.
Because for now, the whole "current dive computer" thing seems
to be ill-defined.
This fixes a bug: the dive-computer number wasn't validated
when making a new dive the current dive. The new code has some
drawbacks though: when selecting a whole trip, the validation
will be called for all dives in the trip and thus the dive computer
number will depend on the dive with the lowest amount of dive
computers in the trip. This will need to be fixed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When collecting the data for the infobox, we have
already computed the current partial pressures of the
breathing gas taking into accoutn the divemode. Use
those rather than fractions (which for CCR mode are
those of diluent) to compute the gas density.
Reported-by: Pietro Tranquillini <p.tranquillini@gmail.com>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The calculation of the deco steps shown in the profile
infobox is somewhat independent of the planner. When
set to imperial units, the distance between deco stops
should be 10ft rather than 3m as 15m is only 49ft.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
If the current dive computer doesn't have a sensor for the cylinder then
check if another dive computer has sensor data available and use that
for the plot.
Signed-off-by: Michael Andreen <michael@andreen.dev>
The only things in display.h were profile related, so the
split between these two files is not comprehensible.
In fact profile.h includes display.h, because it needs the
struct defined therein. Let's just merge these two files.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The only caller misused this function to get access to the
current divecomputer. Remove it, since selection of the
current divecomputer is handled by the MainWindow.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This prevented calculation of the pressure data when dragging
planner handles. However, this lead to weird artifacts.
As an alternative, if this turns out to be too slow, we might
disable the plotting of the pressure curves instead.
That said, even on my super-slow fanless laptop, this performs
reasonably.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old get_maxdepth() function in profile.c was accounting for
two things:
- the partial pressure graphs
- rounding to sane value
Both are now taken care of by the profile itself. This leads to
excessive max-depths. Remove the code from profile.c.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
free_plot_info_data() frees the sample and pressure arrays
and accordingly sets the corresponding pointers to NULL.
However, it doesn't clear the element-count and thus leaves
the structure in an inconsistent state.
Clear the whole structure with memset(). I am not a fan of
doing so, but there are existing memset() calls in the
same source file, so let's keep it like that for consistency.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These were the minimum and maximum of a 9-min window.
The profile now uses an adaptive peak-search, so this is not
used anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This function has accumulated quite some cruft. It seems to add
additional space to make place for certain chart features
(e.g. the average depth text item).
However, it makes no sense to solve this here, as only the
profile knows how much place is needed to display these
features.
Therefore, basically revert this to the original version,
which simply returns the maximum time for long dives
and a threshhold for short dives that depends on the
zoomed_plot setting.
The result looks more reasonable to me, as there is no
(varying!) empty space to the right of the profile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The D in MOD, EAD, END, and EADD stands for "depth" and
as such these should be mm in int rather than double.
The intermediate fn2 and fhe2, however, as intermediate
value should not be rounded to an integer.
The upshot of this is a litle more numerical stability.
It should lead to more stable values in TestProfile
when run on architectures with different floating
point precision.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
In commit 4724c88 get_plot_details_new was updated to pass an index
instead of the entry into plot_string. This means we are passing "i" to
plot_string after the final increment of the for loop, instead of
getting the entry[i] within the loop before the final increment. This
means if we are mousing over the far right of the graph, where the time
based break is not hit, we will end up passing an index equal to nr-2
instead of nr-3, which is intended to shave off the final two rows
containing data not useful to the display.
There are a handful of ways to fix this. This commit intends to be
consistent with stylistic choices made elsewhere in the project.
Signed-off-by: Josh Torres <torres.josh.j@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The sensor member of sample refers to a cylinder from which
the pressure was read. However, some dives don't even have
a cylinder. Therefore, introduce a special NO_SENSOR value
for these dives. Since the cylinder is given as a uint8_t,
0xff seems to be a sensible choice.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In 9bfc6d252, testing of the planner was changed to use the
planner_ds parameter instead of a global variable.
Unfortunately, two conditionals were inverted, leading to
an erroneous ceiling calculation when in the planner.
Restore the proper conditions. Moreover, instead of testing
the planner_ds parameter, use the already existing in_planner
flag, which is derived from said parameter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We used to round the ceilings for the individual tissues with
%.1f but the maximal (and thus effective) ceiling only with
%.0f. This makes no sense or be rounded up (to the conservative
side).
This commit shows also the maximal ceiling with higher accuracy.
Reported-by: Peter Hübner
Signed-off-by: Robert C. Helling <helling@atdotde.de>
To remove reliance on global state, pass an "in_planner" argument
to decoMode(). Thus, calls to in_planner() can be removed.
This is a more-or-less automated change. Ultimately it would
probably be better to pass the current deco-mode to the affected
functions instead of calling decoMode() with an in_planner
parameter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To remove reliance on global state, pass an "in_planner" argument
to vpmb_next_gradient(). Thus, calls to in_planner() can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To remove reliance on global state, pass an "in_planner" argument
to add_segment(). Thus, calls to in_planner() can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This only read accesses the dive and constructs a plot-info
structure. Make the dive parameter const.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When setting a CCR setpoint, the profile code(!) would turn
the dive into a CCR dive. Not only should the display layer
not alter dives, this also means that the action is not
undoable.
Move that to the appropriate undo command, where it makes
more sense, but obviously also makes things more complicated.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of accessing the global displayed_dive variable
in RulerItem, pass the dive. This is a step in making the
profile reentrant.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The profile item that shows the ceilings adds a warning event
if the ceiling is violated. This is very unfortunate.
Improve this situation by adding the event up to the function
that calculates the ceiling. This is still not how it should
be - the display layer should not modify the dive that it
displays.
To make this clear, add a comment that details that this
is a contract between planner and display layer: The planner
uses a dive that can be trampled upon by the profile.
Still, this should be solved differently.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The in_planner() function is incompatible with a reentrant
profile, since it accesses a global variable. In
create_plot_info_new() it is essentially redundant, because
there is a planner_ds (ds = deco_state) parameter that
is used only when in the planner. Therefore use that as
the in_planner indicator: when non-null, the profile is
showing a planned dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since dive.c is so huge, split out divecomputer-related functions
into divecomputer.[c|h], sample.[c|h] and extradata.[c|h].
This does not give huge compile time improvements, since
struct dive contains a struct divecomputer and therefore
dive.h has to include divecomputer.h. However, it make things
distinctly more clear.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In an effort to reduce the size of dive.h and dive.c, break out
the event related functions. Moreover event-names were handled
by the profile-code, collect that also in the new source files.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
No external caller of this function exists. Moreover, turn the return
type to void, as it only returned the passed-in plot_info and no
caller used that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It make debugging much easier if the function signature tells you
that a parameter is not altered.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When plotting profiles with surface segments, there were strange
artifacts. As we found out with Robert, these were due to the fact
that the calculated maxtime was set to the last event which is just one
second inside the surface segment. This terribly confused the profile
code. For example, it didn't properly allocate samples for the surface
segment.
Thus, when calculating maxtime, consider the last sample beyond the
last event.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since we removed MAX_CYLINDERS, we have the possibility of dives
with no cylinders. In such a case, setup_gas_sensor_pressure()
would do invalid read- and write-accesses. Therefore, return
early in such a case.
Reported-by: Chirana Gheorghita Eugeniu Theodor <office@adaptcom.ro>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
I would have bet money that Android used to send stderr to the logcat
log, but apparently it doesn't (anymore?). So in order to be able to
have a chance to debug weird cloud storage issues on Android, let's do
some wholesale replacement of fprintf(stderr,...) with our own version
of the INFO macro that we long ago borrowed from libdivecomputer (and
rename it to ensure we don't have a conflict there).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
free_plot_info_data() freed the pressure-data, but didn't set the
value to NULL. Thus, when the plot_info was reused, a double-free()
could ensue.
Crash condition: export the profiles of multiple dives with pressure
data.
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Apparently this was used to hide events in pre-Qt times. However,
that has already been reimplemented in different ways. Let's remove
that commented-out code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Grammar-nazi ran
git grep -l 'indexes' | xargs sed -i '' -e 's/indexes/indices/g'
to prevent future wincing when reading the source code.
Unfortunatly, Qt itself is infected as in
QModelIndexList QItemSelection::indexes() const
Signed-off-by: Robert C. Helling <helling@atdotde.de>
As per request from users on scubaforum.com, this adds
the current gradient factor to the deco information of
the infobox. Up to now, this information was only
graphically represented in the pressure bar graph
and the heatmap. This gives a numerical value.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Coverty found that in the export functions, we initialize
the planner deco state with NULL and then possibly later
access its content. This makes sure, we don't do that.
Let's see if this makes Coverty happy or I missed somehting
else.
Fixes CID 350736
Fixes CID 350735
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The determination of minimum pressure in calculate_max_limits_new()
in profile.c was wrong for a long time. Since the loop went over all
cylinders (even unused ones), the minimum pressure was always zero.
Since we loop only over used cylinders, the minimum pressure was
initialized to the lowest starting pressure of any cylinder.
If there were no events with pressure change, the minimum pressure
stayed unchanged, resulting in a funky scaling.
Instead, let's initialize the minimum pressure to the lowest ending
pressure.
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of accessing the cylinder table directly, use the get_cylinder()
function. This gives less unwieldy expressions. But more importantly,
the function does bound checking. This is crucial for now as the code
hasn't be properly audited since the change to arbitrarily sized
cylinder tables. Accesses of invalid cylinder indexes may lead to
silent data-corruption that is sometimes not even noticed by
valgrind. Returning NULL instead of an invalid pointer will make
debugging much easier.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of using fixed size arrays, use a new cylinder_table structure.
The code copies the weightsystem code, but is significantly more complex
because cylinders are such an integral part of the core.
Two functions to access the cylinders were added:
get_cylinder() and get_or_create_cylinder()
The former does a simple array access and supposes that the cylinder
exists. The latter is used by the parser(s) and if a cylinder with
the given id does not exist, cylinders up to that id are generated.
One point will make C programmers cringe: the cylinder structure is
passed by value. This is due to the way the table-macros work. A
refactoring of the table macros is planned. It has to be noted that
the size of a cylinder_t is 64 bytes, i.e. 8 long words on a 64-bit
architecture, so passing on the stack is probably not even significantly
slower than passing as reference.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To calculate sac rates, an array of used gases for every point on the
profile was used. This was implemented using unsigned int bitfields.
While nobody sane will ever use 32 or even 64 cylinders, for consistency
with the rest of the code, also change this to use dynamically
allocated arrays.
But allocate only once per shown profile, not once per sample.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
All accesses to the pressure data were converted to use functions.
Therefore it is now rather trivial to dynamically allocate the
pressure array and just change the functions.
The only thing to take care of is the idiosyncratic memory
management. Make sure to free and copy the buffer in the
appropriate places.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
