We don't need to toggle visibility, toggling height is sufficient. This
dramatically simplifies the transitions. But as a result we need to use the
'enabled' property to reset the filter.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QML's logic for who gets focus is a bit complicated. But forceActiveFocus()
cuts through the confusion and makes sure that your field does indeed get
focus.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a usability / performance tradeoff. I like it better when it filters as
I type, but on mobile this may make things feel sluggish.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
[Dirk Hohndel: this is the starting point of my following commits, I decided to
leave it in place to give Jan credit for the work he did on
figuring out some of the plumbing needed to get things to work]
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add 2 icons for filter and sort capabilities. And as before, these
icons are coming from the Google Material design set.
[Dirk Hohndel: Jan's commit forgot to add the actual icons, I added
those so the commit matched its message]
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Back in 8ab8a67f the checkbox where made resizable.
This applies the same functionality to the selector switch and makes the
two objects match in vertical size.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Instead of having people treat latitude and longitude as separate
things, just add a 'location_t' data structure that contains both.
Almost all cases want to always act on them together.
This is really just prep-work for adding a few more locations that we
track: I want to add a entry/exit location to each dive (independent of
the dive site) because of how the Garmin Descent gives us the
information (and hopefully, some day, other dive computers too).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is no reason (any more?) to have a property defined
that basically renames the global pageStack into a local
pageView. Just cleanup.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
AddDivesToTrip, CreateTrip, AutogroupDives, RemoveAutogenTrips
and MergeTrips basically all did the same thing as RemoveDivesFromTrip,
which was already implemented. Thus, factor our the common functionality
and hook it up to make all these functions undo-able.
Don't do the autogroup-call everytime the dive-list is rebuilt
(that would create innumberable undo-actions), but only on dive-load /
import or if expressly asked by the user [by switching the autogroup
flag].
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Disable the Download button when one of the fields vendor, product,
connection is not filled in. The app will crash when trying.
In addition, make the underlying core code to actual download
more safe by checking this, and silently fail instead of crash.
And, yes, this is a double fix in this scenario, but the core code
is used in more places, so better safe than sorry.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The code to disable a quick button has moved to the DC matching logic,
in order to inactivate the correct button also for USB DCs.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
After the previous commits, we now have a preference that nicely
preserves the state of the UI, and we have the well known git_local_only
global, that is used to denote whether we want to use to local repo
only, or we want to interact with the online cloud as well.
This commit gets rid of the now superfluous syncToCloud logic. Instead
we simply set the git_local_only directly.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Hook up the new preference to the UI. So now, an earlier choice
if automatic or manual download to the cloud is preserved in
between sessions. Strictly speaking this fixes issue 1725.
Notice that there is also a higly related syncToCloud thing
present. As factoring out that seemingly duplicate piece
of code is non-trivial, this will be done in a seperate
commit.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
We disabled the drawer menu button to switch between auto/manual
sync when in no cloud mode. Unfortunately, disabeling does not
give a visual cue to the user (like greyed out). Instead, just
make this button invisable in no cloud mode.
In conjunction a question. The manual sync to cloud menu item
takes you to the Cloud Credetials page in case pressed in
no cloud mode. While valid, this seems strange. This is not
changed in this commit.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This simple one-liner fixes an actual bug. On switching from
a no-cloud account to a actual cloud account, the dives from
the no-cloud are added to the actual cloud account. And indeed
the dives appear correctly. However, when exiting the app
right away, these added dives are not commited to the local
storage. Simply, the divelist needs to be marked dirty.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The background color was plain white, where we use a slightly different
color in other places. In addition, the background when clicking on a row
did not follow the theme setting. Consistency fix.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Something I only see on mobile-on-desktop, so at this point in time
not very relevant to the device apps. When hovering on the action
button, a toast message shows a hint box. These where empty in some
cases. So, just give the actions a text attribute where it was
missing.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
process_imported_dives() is more efficient for downloaded than for
imported (from a file) dives, because it checks only the divecomputer
of the first dive.
This condition is checked via the "downloaded" flag of the first
dive. Instead, pass an argument to process_imported_dives().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Dives are now in all cases imported via distinct dive_tables.
Therefore the "preexisting" marker is useless. Remove.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When starting the mobile app, I noticed a short display of an empty
page with title "Cloud creditials" just before showing the
divelist. Simply a not nice visual effect.
This commit simplifies some logic and resolves this. As the code
in this part is fragile, this is tested for normal and clean
startup of the app, switching credentials, from no cloud to
valid account (which even nicely imports the no cloud dives:
this surprised me as I have never seen this working).
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
We need to delete all related data when forgetting dive computers or we will
have an issue if we connect a DC from the same vendor but of a different model.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Improve the logic when auto selecting a DC for download.
Some USB cables only supply vendor information but we can select the correct
model if we have downloaded from it before.
For BT/BLE our discovery process adds the device name to the address, so we need to keep that in mind when we try to match against what we seen before.
When we have a positive match for a DC we have seen before we deactivate the
corresponding button of our saved DCs.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
A technically trival commit, but one with long story. This commit
basically reverts dd1d90b529 (1.5 year ago). While upgrading
Kirigami after Kirigami commit 26b8bdea24c39, we suddenly have
overlapping divelist and details pages in case they are both
on the pageStack (this occurrs when navigating from divedetails
to the divelist using breadcrumb navigation). At this point, its
not clear (to me) if this the by design of Kirigami, or an unintended
effect of the mentioned Kirigami commit.
This all said. Simply clipping resolves our issue of overlapping
pages, and it does not harm.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Something that I simply overlooked earlier with respect to scaling the
divelist. The trip databox did scale a bit, but it was not nicely
related to the hight of the trip header. So there was a tiny
overflow on the small scale on a small device. Fixed here.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Partially cosmetic and partially a bug fix. 1) the seperator line
between trips and dives that are not in a trip was drawn in the
background color => the line was invisible. 2) When looking very
closely, there was a 1-2 pixel wide error between the seperator line
between trips and dives that are not in a trip. 3) there was a comment
that the trip separator needed to be extra thick. IMHO, this
looks ugly, and is superfluous as there is a nice sidebar along
the dives that belong to the trip. Finally, the line shall not
be displayed when not in a trip.
So, basically, the line (the QML rectangle) is completely rewritten,
to take care of all issues. There is 1 hack: the line color is
taken from the dive separator line. But its fully unclear to me
where that color is defined in Qt/QML or Kirigami, so I hardcoded
the proper color. That just works.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
A small cosmetic change. The delete from divelist button was "glued"
to the top of the line. Not nice, so just center it vertically, and
make the button a tiny bit smaller, so that it fits nicely on the line.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Fully usure why the code was as it was. The trip header had 2
overlapping mouse areas, to expand the trip and vise versa. Simply
remove the smallest one.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
A very unimportant change, but found when looking through the code
for places where size of icons where used. The one changed here
has nothing to do with icon related placement of a string, so
its replaced by a way more logical placement of the affected string.
Simply center the "no dives in the dive list" for an empty logbook
on the screen, instead of at some random place in the upper left
corner. Like I said: very unimportant, but it just looks nicer
in the UI.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
A relatively big change for such a simple page. Most relevant
changes are:
1) Do not use Kirigami.Header anymore. It appears that this header
has word wrapping on (and we cannot override that). This is
annoying on this page, as headings seems randomly be split over
2 lines, even in cases where there is more than enhough room to
display it on one line. And as the Kirigami.Header is just a
trivial wrapper of a Text field, we can simple replace it.
2) A lot of the toplevel GridLayouts had width properties set. These
are not needed (and confused my debugging code), so they are removed
withput any visual change. As a general rule, do not try to set
properties that are not needed. In general, it can only lead to
binding loops or undefined behavior.
3) Add a font size to our Theme. The step from regular to title size
was a little too big.
4) And, obviously, numerous font.pointSize lines are added to actually
resize the font.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
There was a strange big margin at the top of the the dive details
page. Just make it a bit more "normal".
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
There was a significant of not needed whitespace on the download from
DC page. Most importantly, the bottom buttons where not on the bottom,
so we had to truncate the downloaded dives early (to prevent overflowing
the buttons). Further, a tiny bit of padding is removed between the
3 top pull down items.
All this, results in the diplay of more dives without scrolling.
For example, previously, only 1 dive (with 1 stored DC) was shown
on my 5.5" device, and now 3 (scale: regular).
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Changed some hard coded size and positioning of the SsrfCheckBox,
in such a way that is scales nicely to the current setting of the
mobile_scale.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The select buttons in the downloaded dives delegate overlapped
the dive data. Simple margin change fixes this.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Make the ssrfButton and the pull down menu's on the download page
resizable. Notice that also the contents of the pulldown
menu's is scaled based on the font size.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
A user reported problems with editing the Suit and DiveMaster fields.
Apparently, editing does not change the currentText. Without doing
a deeper analysis, simply use editText (a more proper fix might be
changing the currentIndex on editing).
(Parially?) fixes#1694
Reported-by: Mark Powell <mcpowell123@gmail.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Changing the scale, it seems that the header of trips is not rescaled.
The reason for this is simple. That string does not use our manipulated
font but a different one. In fact, this is the only ocurrence on the
divelist that did not scale. However, other screens hardly rescaled at
all. All these will be fixed in seperate commits.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
After the work in the previous commit, it gets very simple to implement
font scaling. Just assign a the new desired font scale to the used
font metrics. The QML engine does all the work.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
By manipulation the used font pointSize property, we can dynamically
scale fonts and derived UI objects. At the same time, we have
some logic to determine the default font, its size, etc, for example
depending on screen properties. The scaling of the UI (and its font)
does not need to interfere with those defaults.
However, when we want to reset the pointSize, we alter the default, so
a backup of the default is needed. Ok, not al full backup, as the only
thing we like to manipulate is the pointSize, to which we want to be
able to return.
All this leads to this commit. A basePointSize property is added, that
is initialized from the default. Due to the binding logic of the QML
engine, it is not a classic initialization, but a binding between the
2 properties. We need to break that binding explicitly, so that
the original PointSize is always preserved.
In addition, a display of the new font property is added to the
developers theme test.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This theme test display created a new local FontMetrics object, that
does not per definition correspond with the "global" font metric
as defined in main.qml. The fix is simple. Display the font theme
data based on the one and only font metric from main.qml
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
It seems the documentation is incorrect - unless you explicitly set the
ApplicationWindow font to the the Application Font (just writing this
down sounds so silly...), it doesn't actually work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Disable the button for the currently selected DC.
This gives an extra visual hint of which DC is currently selected.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
To prevent stale data in the download DC path we need to clear the entire
qPrefDiveComputer.vendor() object when the user purges the used DCs.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Since we now store the last used DCs in out preferences we can use the information
to pre-populate the DC selector.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
process_dives() is used to post-process the dive table after loading
or importing. The first parameter states whether this was after
load or import.
Especially in the light of undo, load and import are fundamentally
different things. Notably, that latter should be undo-able, whereas
the former is not. Therefore, as a first step to make import undo-able,
split the function in two versions and remove the first parameter.
It turns out the the load-version is very light. It only sets the
DC nicknames and sorts the dive-table. There seems to be no reason
to merge dives.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We only store the address part of the connection name, so don't try to find an
exact match, try to find the sub-string.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to explicitly refresh the divelist when switching between
metric and imperial unit systems. Or the changes will not be visible until
we restart the app or scroll outside of what's in the current cache.
This will update both the divelist view and the dive profiles to show the new units.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
The unit types are set from system locale when the app starts.
We need to explicitly set the units to match the unit system that is saved in
the git repo. Or we end up with situations where the preferences and git say
"metric" but the units are "imperial".
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When starting the app in "No cloud mode" we need to make sure that the units
and unit_system match.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add the option for the user to set the desired unit system for
Subsurface-mobile regardless of system locale
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Trivial rename of a UI string. The string "Subsurface GPS data webservice"
reminds me too much of the legacy webservice.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Use qPrefLocationService::set_time_threshold and remove from
qmlprefs.cpp and qmlmanager.cpp
Remark: mobile UI shows time in minutes, while it is stored (and calculated)
in seconds. Therefore a /60 when reading and *60 when setting.
Signed-off-by: Jan Iversen <jani@apache.org>
Remove distanceThreshold from qmlprefs and use qPref instead
update qml
no user experience change
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove developer from qmlprefs and use qPref instead
Update qml
show_developer is saved on disk, and thus remembered between starts.
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order to address the C++ object directy in qml, a different
registration is needed.
qmlRegisterType, registers the C++ class, allowing qml code to inherit
from it and make qml objects. This is needed for graphical elemnets
like profile and map
setContentProperty, registers the C++ object, thus allowing signals to be
catched.
Signed-off-by: Jan Iversen <jani@apache.org>
Despite the fast that this code is sitting in core, its used mainly
from mobile. In 987e221f8e, the buttons to interact with the GPS
webservice were deleted from the UI. Now, delete all the code that
was used under these buttons.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is the first commit related to the removal of the GPS
webservice. It is nothing more then removing 2 buttons from the
menu to upload and download from the server, so technically
a trivial change.
As with the desktop application: Be very careful here as this
forces our users to use Subsurface-mobile, and a online cloud
account as that is the way to transfer GPS data from a mobile
device to the desktop.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
When installing for the first time cloudCredentials needs to be added,
this commit a problem with updating them correctly
this problem was caused by
da6e8a4cd5
Signed-off-by: Jan Iversen <jani@apache.org>
Add the UI components to let the user set the default cylinder and select
the chosen cylinder when adding a new dive.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
To enable undo of divelog-importing it is crucial that parse_file()
can parse into arbitrary dive tables.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
A trivial cleanup: replace void by properly typed pointers in
cylinder_none() and weightsystem_none(). Moreover, remove the
unused function no_weightsystems().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
remove use of SettingsObjectWrapper::
remove include of SettingsObjectWrapper.h
use qPrefFoo:: for setters and getters
replace prefs.foo with qPrefXYZ::foo() where feasible
(this expands to the same code, but gives us more control
over the variable).
Signed-off-by: Jan Iversen <jani@apache.org>
remove General from SettingsObjectWrapper and reference qPrefGeneral
update files using SettingsObjectWrapper/General to use qPrefGeneral
this activated qPrefGeneral and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
remove LocationService from SettingsObjectWrapper and reference qPrefLocationService
update files using SettingsObjectWrapper/LocationService to use qPrefLocationService
this activated qPrefLocationService and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
With the new setup we need to know which state we are coming from
when we are saving cylinder related info. When we are adding
a new dive we explicitly should save cylinder data to the first cylinder.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Same as for cylinder info, we need to make sure that the gasmixes gets saved to the correct cylinder.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Save the edited cylinder in the correct slot.
Since the cylinder number and the used cylinder number need not be
the same we first need to test if the cylinder are used.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
This displays the used cylinders in a dive so that they can be edited.
Currently limited to 5 as a POC.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
If we don't know the vendor or product, let's not overwrite information
that we may have remembered from the last time the user downloaded from
this dive computer.
Note that this doesn't try to associate a specific cable with the
information used last time. We could be smarter here for people who have
multiple dive computers, but for the most typical user with just one
dive computer, this does seem like a good solution.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We do strip the user friendly name from BT addresses and this mistakenly
mangled 'USB device' to 'device'.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Parse the device string and try to figure out what was plugged in.
In some cases we know exactly which vendor and product was plugged in,
in other cases we only know which vendor it was, in some cases we don't
even know that (if all we see is a generic FTDI cable).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This only works if the USB device contains enough information to do so.
We need to collect more information to understand what information we
get if those get plugged in. Maybe we'll get only the vendor and need to
leave it to the user to set the product (which we can do by passing an
index of -1 for product).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Unless, of course, the user was editing or adding a dive - that would
be annoying to have interrupted (even though, of course, it's the user
plugging in the device which would trigger this in the first place).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And try to guess which one from the device string we get from the Intent.
The function is named to indicate its future use (because once the user
plugs in such a device, we should show the download page).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user plugs in a device on Android we get a device string that
should allow us to figure out which dive computer was plugged in. Make
that string available to the QML UI.
Right now all we do is log it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
add enum to qPref and remove elsewhere
update source core to reference qPref.
the enum cannot be in pref.h because it is to be used in qml and Q_ENUM
need the enum to be defined as part of the class
Signed-off-by: Jan Iversen <jani@apache.org>
Use Q_ENUM instad of Q_ENUMS (which is depreciated) since it does the
meta registration for all Qt platforms.
Q_ENUM require the enum to be defined in the class and cannot refer to
a global class, therefore copied enum to class.
This commit is made to get the release to work, with minimal changes,
this class will be moved to qPref and the double definition solved
Signed-off-by: Jan Iversen <jani@apache.org>
Remove cloud_storage_status from qmlprefs.h.
usage to qPref::
enum cloud_storage_status is not used from C, but only from C++, and
having the same structure defined multiple times is a maintenance
challenge.
Signed-off-by: Jan Iversen <jani@apache.org>
The clipboard fails if we attempt to copy more than 1MB of data. But the
data buffer used is shared between all transactions 'in flight' and we
cannot tell what else is currently using that buffer. Limiting ourselves
to 500k of text for the logfiles seems reasonable and hopefully makes it
more likely that the transaction will succeed (sadly, Qt doesn't tell us
if it failed).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On some devices (e.g., a Sony Xperia phone) the GenericDataLocation is
not app writeable. Instead of just giving app, try a few other default
locations as well (and since all of these are actually string lists,
try all of the options that Qt gives us).
Reasonably, we should only set the libdivecomputer logfile name if we
found a writeable location.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The info text from the download process wasn't rendered correctly.
maximumWidth ended being a recursive reference and as a result the text
would render as very narrow and super-tall field.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt 5.11 adds useful warnings when code attempts to use anchors within
Layouts and even tells you how to fix things.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
remove MapWidget entries from mobile-resources.qrc, and
reference map-widget.qrc in Subsurface-mobile.pro for iOS
Signed-off-by: Jan Iversen <jani@apache.org>
This way the user doesn't inadvertantly end up with information from a previous
run of Subsurface-mobile when they copy the logs to the clipboard.
Not sure we should do the same when building for desktop, so right now it's
only when building for a device.
Reported-by: Thomas Fänge <thomas.fange@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is based on something that Anton Ludin sent to the mailing list.
Reading through the code it seemed that there were scenarios in which
DC_vendor and DC_product were not updated correctly. That's one of the
problems of the declarative approach in QML - it can be very hard to
figure out which code is run when in certain situations.
This may help address the issue with FTDI downloads no longer working on
Android.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The asynchronous load seemed to be (at least one of) the culprit(s) of
the banner occasionally not showing up.
Making the font for the cloud ID smaller looks better (and works much
better for long email addresses).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We want to allow people to keep dives they collected without a cloud
account. The code was mostly there, we just got confused about the
existing status because we ran through this twice (no cloud -> unknown
-> verified). This way we explicitly remember this kind of transition.
Fixes#1404
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
That change clearly would have benefited from better code review.
This is a superset of a change proposed by Jan Iversen.
Closes#1406
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For some reason Kirigami.Icon mess up icon display when filename
extension is omitted. Because of this a perfectly good, scalable svg
show up as a low resolution scaled up icon.
Signed-off-by: Murillo Bernardes <mfbernardes@gmail.com>
calls to savePreferences was moved to prefs. in
b8eb348f54, but the corresponding
C++ code was not merged.
Revert call to savePreferences to manager.
Signed-off-by: Jan Iversen <jani@apache.org>
The commit secured that plotDive was not called before actually being used.
However our (rather fragile) C++ qml interface did not work correctly (ony sometimes).
Revert the previous commit.
Signed-off-by: Jan Iversen <jani@apache.org>
Kirigami appears to have a bug that makes it fail to show our icon.
With this we can be much more flexible in what we show in the top area
of the global drawer.
Fixes#1331
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit b8eb348f moved credentialStatus but missed one spot.
When starting from a fresh install, clicking "No cloud mode” fails because of this.
Signed-off-by: Murillo Bernardes <mfbernardes@gmail.com>
Looks like commit 807571a588 ("core: update deviceData default from
qml") never actually was tested with dive computer download. This looks
rather like an automatic renaming gone wrong.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
add settings variables/functions to qmlprefs
remove settings variables/functions from qmlmanager
change manager. to prefs. in qml files for setting variables/functions
Signed-off-by: Jan Iversen <jani@apache.org>
Remove Q_OBJECT and qml properties from DCDeviceData class
Remove DCDeviceData register from mobile-helper.cpp
Change DCDeviceData constructor to be without parameters
Signed-off-by: Jan Iversen <jani@apache.org>
Set index of comboboxes in Download screen when the page
becomes visible instead of when it is created.
The pages is created before QBluetoothDeviceDiscoveryAgent on iOS and desktop,
therefore combobox indexes cannot be set during page creation.
Signed-off-by: Jan Iversen <jani@apache.org>
helpers.h included qthelper.h and all functions declared in helpers.h
were defined in qthelper.h. Therefore fold the former into the latter,
since the split seems completely arbitrary.
While doing so, change the return-type of get_dc_nichname from
"const QString" to "QString".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Subsurface-mobile has a long startup time; in order to isolate the problem(s) a
timer is added to see where time is "lost".
The collected startup times are added to the clipboard together with the other
logs, allowing test users to report back.
All this is only enabled when compiling with -DENABLE_STARTUP_TIMING
Closes#1340
[Dirk Hohndel: collapsed multiple commits and minor white space cleanups, added
missing QMutex variable]
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Dive list: on holding an item, the delete button
was not showing the icon.
Show GPS fixes: when swiping an item icons were
not being shown.
Partial for bug #1267
Signed-off-by: Murillo Bernardes <mfbernardes@gmail.com>
Adjust size of image and text to ensure that
the clipboard buttom is (nearly) always visible
The buttom is not directly visible in landscape
mode on a small device.
Signed-off-by: Jan Iversen <jani@apache.org>
The actual profile object was destroyed with deleteLater() in the
destructor of QMLProfile. This is ominous, because the subobject
shouldn't survive the parent object.
Therefore, automatically destroy the profile by using a QScopedPointer.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The reply member variable was used to access the reply in the
handleSslErrors, handleError and retrieveUserid slots. This is a
very scary proposition in the light of multi-threading. Instead,
the reply can be accessed by using the QObject::sender() function.
Thus, we can remove the member variable.
The request member was just downright weird. This was only used
locally to describe a network request. Since QNetworkAccessManager::get()
copies the request, it can be destructed right away. Nevertheless,
the data was kept as a subobject. Remove member and make it function-local.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Reactivate printMode true for ssrf-mobile to avoid font problems,
do not discard events if ssrf-mobile (even though printMode is true)
Signed-off-by: Jan Iversen <jani@apache.org>
print mode was used to limit the functionality of the profile,
when used in ssrf-mobile.
The effect is that DC events are displayed, but not selectable
Signed-off-by: Jan Iversen <jani@apache.org>
Read libdivecomputer.log file and append to clipboard
Remark, subsurface_open is not available in iOS so using
QFile instead.
Signed-off-by: Jan Iversen <jani@apache.org>
Users need a simple way to report download problems. Asking them
to go into settings, activate logging, and repeat the download
is too much.
libdivecomputer.log will always be generated, but overwritten, with every
download, so the latest log is ready.
The download is very slow due to BT, so there are no impact of having the log
active, neither in terms of size (a concern on small mobiles) or write time.
Signed-off-by: Jan Iversen <jani@apache.org>
When downloading with bluetooth, changing connection did not work.
The new selection was not passed to the download thread.
Fixes#1274
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
on iOS it is practically impossible to copy the App log
to e.g. a mail! in iOS 11 the log file is stored within
the subsurface container and you first need to copy (actually
using the clipboard) out from there to the "normal" document
shared space, before it can be used.
At least iOS users (and I believe Android users) are not really
used to work with files, so the process is not easy to document
in an understandable way.
The alternative is to provide a button, which simply puts the
log on the general clipboard, allowing it to be pasted in a
multitud of applications.
Signed-off-by: Jan Iversen <jani@apache.org>
Icons used directly by Kirigami use /org/kde/kirigami
as prefix. Ex: previous and next icons on header.
Signed-off-by: Murillo Bernardes <mfbernardes@gmail.com>
Icons used directly by Kirigami use /org/kde/kirigami
as prefix. Ex: previous button on the GlobalDrawer.
Signed-off-by: Murillo Bernardes <mfbernardes@gmail.com>
fake_dc() used to return a statically allocated dc with statically
allocated samples. This is of course a questionable practice in
the light of multi-threading / resource ownership. Once these
problems were recognized, the parameter "alloc" was added. If set
to true, the function would still return a statically allocated
dc, but heap-allocated samples, which could then be copied in
a different dc.
All in all an ownership nightmare and a recipie for disaster.
The returned static dc was only used as a pointer to the samples
anyway. There are four callers of fake_dc() and they all have access
to a dc-structure without samples. Therefore, change the semantics
of fake_dc() to fill out the passed in dc. If the caller does
not care about the samples, it can simply reset the sample number
to zero after work.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We had turned this off since it caused rendering issues, but that
appears to be fixed now - and it should help to get us smoother
rendering of the dive list.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And maybe this will make it faster as well? Depends on how the binding
is implemented, I guess.
But at least it's less confusing to read now.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way the menu items describe what happens when you tap on that menu
item. That seems more consistent and intuitive.
See #1204
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In older versions of Kirigami this caused all kinds of problems so we
eventually gave up on it in commit 13c49276d1 (Revert "QML UI: make
dive list fold dive trips").
Now this seems to work much better, so let's bring back trip folding!
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far we only wrote messages to subsurface.log on Android (since we couldn't
figure out how to make that file user accessible on iOS). Now that that's
fixed, we also need to actually write to the file in the first place.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
By creating it in the Documents path and setting the two magic keys,
iOS will make the log file available to the user.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of showing the map zoomed over London by default,
initialize the center at [0,0] and show the whole globe.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
centerOnLocationHard() is added in MapPage.qml so that
on `firstRun` the map is hard panned to the desired location
without animation.
This affects the selection of a new "Dive details" -> "Map it" or
when opening a GPS location in the map.
The idea behind this change is to avoid starting the map animation
from an arbitrary location such as [0,0] or London. Also, to not
start the map zoomed out completely and then zoom in on a selected
dive.
For this change to work, add the helper getCoordinatesForUUID()
to qmlmapwidgethelper.cpp/.h and use it to obtain the
QGeoCoordinates for a dive site UUID.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The background color in our own checkbox should match the page background.
Also includes some whitespace cleanup.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
In the initial move to comboboxes the correct location model
was not used. This uses the correct model and makes it behave
like the other comboboxes.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
When a dive has multiple buddies, pick the index of the first
to prevent the user from hanving to scroll through the entire
list when editing.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Removing the comparison of currentText vs editText when saving buddies
fixes the issue of data loss when dive has more than one buddy.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
The HintsTextEdit just doesn't feel natural and intuitive.
Edit, fixed rebase issues.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
strdup(qPrintable(s)) and copy_string(qPrintable(s)) were such common
occurrences that they seem worthy of a short helper-function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace constructs of the kind
s.toUtf8().data(),
s.toUtf8().constData(),
s.toLocal8Bit().data(),
s.toLocal8Bit.constData() or
qUtf8Printable(s)
by
qPrintable(s).
This is concise, consistent and - in principle - more performant than
the .data() versions.
Sadly, owing to a suboptimal implementation, qPrintable(s) currently
is a pessimization compared to s.toUtf8().data(). A fix is scheduled for
new Qt versions: https://codereview.qt-project.org/#/c/221331/
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
registerError() may be called from a different thread context. Passing
the message as a const-reference may lead to a dangling reference.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When the slot pageStack.onCurrentItemChanged() is reached
make sure that the stackView becomes non-interactive.
This prevents swiping left on the map to "go back".
Also, always reload the map markers when the map becomes visible.
This is not optimal and instead something in the lines of:
DiveList.model.onChanged()
is a much better solution.
Ideally the map reload should happen on dive removal, dive addition,
dive edits and sync from cloud.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
showMap() uses a location to open Google Maps in a browser.
Make showMap() a generic function to push the mapPage on the view
stack.
Update the calls to this function from child widgets and pages.
Also either call mapPage.centerOnLocation()
or mapPage.centerOnDiveSiteUUID() depending if the caller
wants the map to center on a dive site or on map coordinates.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The Page object has the following functionality:
- reloadMap(): reload all map markers.
- centerOnDiveSiteUUID(): center the map on a dive site uuid.
- centerOnLocation(): the map on a latitude, longitude in decimal.
- Select a dive list entry based on a marker selected on the map via
diveList.setCurrentDiveListIndex()
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Add the setCurrentDiveListIndex() wrapper for:
diveListView.currentIndex = idx
wich also makes it possible to disable the scroll animation when
selecting dive list indexes which are too far apart.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Also a developer likes to see a nicely formatted page, so correct
some bugs in margin handling on the log page. There was a strange
multi-line whitespace on the top of the list, and the total width
of the page was (initially) a little smaller than full page, so
showing a small strip of the page left on the pageStack. This
just looks weird. So again, cosmetics only.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
See also 15cdcdbc6. There, we introduced the wideScreen (set to true)
to evade a (cosmetic) bug in (most likely) Kirigami. The top dive
was partially obscured on the start of the app. And by setting the
wideScreen to true, the application header became of a fixed height.
Numerous changes further in Kirigami, we can now set this property to
false. This results in a correctly displayed divelist at the start of
the app, and *also* an application header that correcly hides itself
when scrolling up, and displays itself again when scrolling down. So,
a behavior that is common to, for example, mobile brouwsers.
This all said. I still believe this is a workround for strange behavior.
In fact, we should not need to set this wideScreen property at all,
and Kirigami should behave correct in all cases (true, false, unset
at our end). It behaves correctly when set to true or false, but
still displays a partially hidden top item in the dive list when
unset.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This worked correctly while compiled against Qt 5.10.0, but after
installing Qt 5.10.1 the behavior was just wrong. And as there
seems no way to color the background of a Kirigami SwipeListItem,
just revert this, and accept the (slightly) inconsistent coloring
of the page (for now).
This reverts commit 6700715b5d.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Trivial and cosmetics only fix. The width of the rescan button
was forgotten, and this pushed the right margin to the right,
causing the combo menus to overflow the right margin.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
And another one. The SwipeListItem also needs to have a set
background color. Unfortunately, the lines between the
individual SwipeListItem disappeared, so, set the
smallest possible border on these items.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Also, this got broken after the Kirigami to verion 2.2 in main.qml.
So, set the header background color according to our theme setting.
Notice, that there is a remaining issue here. We could color the
text color in the header, but now, this seems impossible (or I
do not understand how and where to set this).
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
For some reason, after the update of the main.qml to version 2.2,
all Kirigami Pages and scrollablePages show up plain white.
So now, set a proper background for these pages.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is subtle one. With the changing of the theme color, it
appeared that the hover and selected colors in the divelist
where wrong (as in, always blue-ish). This is easily solved
by setting the activeBackgroundColor to our theme color, and
Kirigami does the rest (tint and opaque settings for the
different states a selected dive can be in).
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is a long standing issue. I wish to keep up with Kirigami developments
including new versions of their controls, but this is not always easy.
While we upgraded to Kirigmi 2.2 for most of our QML earlier, using this
new version of main.qml breaks numerous stuff. In fact, so much that
we just needed to wait.
With the progress in Kirigmi, it is now possible to upgrade, with still
some issues on our side to be fixed, but this is manageble now.
The main show-stopper was a construct to set our theme colors, for example:
Kirigami.Theme.highlightColor = Qt.binding(...)
This is not posssible any more, as the Kirigami.Theme has made these
readonly on their end.
This commit just removes the assignments to the now readonly theme
items. And the setting of a correct theme color for the action button.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Trivial removal of 2 unused Kirigami actions. These were leftovers
from the time we had a very different style of cloud account
management.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Commits fed2c5b6a1 and 572fc4707 erroneously deleted two
aliases. That is corrected here. Yes, QML with only runtime
errors can be a pain.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
As we need to update our new stringlist models on multiple
locations, just refactor them into a new function.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
See also e6e1473e6. The construction of the locationlist
was not the same as the 3 previous lists, and it needs
the inclusion of a new model file (divelocationmodel.cpp)
in the mobile app. In addition, as the mobile app is mainly
interested in a simple stringList (model) to populate a HintsText
field (or maybe later a combobox), this stringlist is added
to the model, to easy interfacing with QML.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
See e6e1473e6. Exact same commit but here for the
list of divemaster. The careful reader will spot a
small addition to the clearDetailsEdit() QML function.
Two more field are cleared.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is the first of a set of commits that are (very) similar.
It appeared that a number of more or less static lists, which are
constructed by a loop over all dives in the logbook, were executed
when changing focus to a next dive. For example, the in this
commit addressed list of used dive suits.
What was wrong was that the suitList was linked to a dive. There
is only a need to construct the list of used suits when data is
changed (and obviously, once on startup of the app). Further, it
appeared that a lot of code was duplicated and that we can use
(in this case) the same code from the desktop completionmodels.cpp.
Basically, this commit involves the following changes:
- include completionmodels.cpp in mobile and desktop (so move
it from the desktop only category to the generic category).
- remove double code from DiveObjectHelper.cpp
- Do not differentiate in the init phase and the normal refresh
of the list
- the per dive logic is now only the getting of a previously
constructed list (in init or update of the divelist).
There are no visible changes in the UI, other than a better
performance when scrolling over dive details.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
