The tooltip's plotInfo was not cleared when clearing the profile.
With the new cylinder code, this lead to crashes, because the
displayed_dive's cylinder array is now cleared. The old code would
happily read stale data from the fixed-size cylinders array.
Clear the plotInfo explicitly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the future we might want to use undo-commands for mobile as
well (even if not implementing undo).
Therefore, move the undo-command source from desktop-widgets
to their own commands top-level folder.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of accessing the cylinder table directly, use the get_cylinder()
function. This gives less unwieldy expressions. But more importantly,
the function does bound checking. This is crucial for now as the code
hasn't be properly audited since the change to arbitrarily sized
cylinder tables. Accesses of invalid cylinder indexes may lead to
silent data-corruption that is sometimes not even noticed by
valgrind. Returning NULL instead of an invalid pointer will make
debugging much easier.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of using fixed size arrays, use a new cylinder_table structure.
The code copies the weightsystem code, but is significantly more complex
because cylinders are such an integral part of the core.
Two functions to access the cylinders were added:
get_cylinder() and get_or_create_cylinder()
The former does a simple array access and supposes that the cylinder
exists. The latter is used by the parser(s) and if a cylinder with
the given id does not exist, cylinders up to that id are generated.
One point will make C programmers cringe: the cylinder structure is
passed by value. This is due to the way the table-macros work. A
refactoring of the table macros is planned. It has to be noted that
the size of a cylinder_t is 64 bytes, i.e. 8 long words on a 64-bit
architecture, so passing on the stack is probably not even significantly
slower than passing as reference.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Some widgets copy the full plot info. Free these data on exit to
prevent monstrous valgrind reports.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Continue with replacing pointers to struct plot_data entries
by indexes. Thus the pressure data can be kept in its own
array and can by dynamically sized.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The ProfileWidget2::getEntryFromPos() function was only used
by code that was commented out. Thus comment it out as well.
Moreover, turn the accompanying FIXME comments into TODO comments
to avoid a new LGTML alert.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The ProfileWidget2::recalcCeiling() function is used in one place,
namely when an undo-command changes the mode. It recalculates
decompression data and repaints the ceilings and thus avoids a
full profile-redraw.
This is smart, but it becomes problematic when the dive is changed
and the ceiling is recalculated before the profile is redrawn.
The DivePlotDataModel then still has data from the previous dive
but cylinders of the new dive are accessed.
This kind of situation may arise if multiple dive fields are
updated, as for example when replanning a dive.
Currently, this only causes a temporary mis-calculation. When
removing MAX_CYLINDERS this will lead to crashes.
One might attempt to fix the whole data-dependency mess. This
commit goes the cheap route and simply redraws the profile when
the mode is changed. Yes, it is in a way ineffective, but we
do worse things. The ProfileWidget2::recalcCeiling() thus becomes
unused and is removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
I'm a bit confused why this enum has two extra values, NUM_DIVEMODE and
UNDEF_COMP_TYPE. I can see how this could create confusion. This may
benefit from addition review.
Found by Coverity. Fixes CID 350092.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since requiring Qt >= 5.9.1, we can use the pointer-to-member-function
overloads of addAction (introduced in Qt 5.6). This has the advantage
of compile-time checking of the signal/slot parameters.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The create_plot_info_new() function releases old plot data. This
can only work if the plot_info structure was initialized previously.
The ProfileWidget2 did that by a memset, but other parts of the code
did not.
Therefore, introduce a init_plot_info() function and call that when
generating a plot_info struct. Constructors would make this so much
easier - but since this is called from C, we can't use them.
Fixes#2251
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move the declarations of the "report_error()" and "set_error_cb()"
functions and the "verbose" variable to errorhelper.h.
Thus, error-reporting translation units don't have to import the
big dive.h header file.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace the INTERPOLATED_PRESSURE and SENSOR_PRESSURE macros by
inline functions. Generate a common inline function that reads
a pressure value for a dynamic sensor.
Not all SENSOR_PRESSURE macros can be replaced, because the
macro is also used to set the value and C sadly doesn't know
the concept of "return reference from a function".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The plotDive() function had a flag to plot pictures asynchronously.
This was used on export. Rename this field to "instant" and disable
animations when set. This should make sure that the axes are properly
exported.
Fixes#2170
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When exporting dive pictures we don't want animations. Therefore,
store the animation speed in the profile object to avoid nasty
hacks with the preferences.
This actually removes such a hack. Pictures and tooltips for now
still use the values stored in the preferences, because their
animations happen only on user-interactions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The goal here is to slowly make animation speed a variable of the
profile widget, not of the global preferences. Currently the code
does some trickeries with setting / unsetting the global animation
speed.
Start by not taking a bool "instant" but a speed in
DiveEventItem::recalculatePos().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
All callers of create_plot_info_new() called calculate_max_limits_new()
a line before. Thus, simply call the latter in the former.
This allows us to automatically free the plot data in create_plot_info_new().
The old code overwrote the corresponding field with NULL.
As a side-effect, this removes a bogus static variable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There was a global variable last_pi_entry_new, which stored the
recently allocated plot data. This was freed when new plot data
was generated.
A very scary proposition: You can never have two plot datas at
the same time! But exactly that happens when you export for
example subtitles.
The only reason why this didn't lead to very crazy behavior
is that at least on my Linux machine, the calloc() call would
just return the previously freed memory.
Fix this mess by removing the global variable and freeing the
data in the callers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In ProfileWidget2::splitDive() updateDiveInfo was emitted, but the
UndoCommand does this by itself.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, count_divecomputers only works on the current_dive.
Instead, let it take a pointer to an arbitrary dive. This is
in preparation for being smarter in the undo code concerning
which dive computer to show on deletion.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of the elegant solution that just modifies the dive,
keep two copies and add either the old or the new copy. This
is primitive, but it trivially keeps the dives in the right order.
The order might change on renumbering the dive computers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The whole edit logic moved from displayed_dive to current_dive
and it became more and more tedious to keep these in sync.
Therefore, simply always display current_dive. The only exceptions
are the equipment tab and the planner, as these are not yet
integrated in the undo system. Once this is done, displayed_dive
can be removed.
Moreover, remove the clear parameter from updateDiveInfo().
Instead simply clear of there is no current_dive set.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
See https://www.kdab.com/goodbye-q_foreach/
This is reduced to the places where the container is const or can be made const
without the need to always introduce an extra variable. Sadly qAsConst (Qt 5.7)
and std::as_const (C++17) are not available in all supported setups.
Also do some minor cleanups along the way.
Signed-off-by: Rolf Eike Beer <eike@sf-mail.de>
Allow splitting out a dive computer into a distinct dive. This
is realized by generating a base class from SplitDive.
This turned out to be more cumbersome than expected: we don't
know a-priori which of the split dives will come first. Since
the undo-command saves the indices where the dives will be insert,
these have to be calculated. This is an premature optimization,
which makes more pain than necessary. Let's remove it and
simply determine the insertion index when executing the command.
Original code by Linus Torvalds <torvalds@linux-foundation.org>.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of passing a pointer, pass a cons reference. This is more
idiomatic and consistent with RulerNodeItem2::setPlotInfo().
Also make the reference passed to RulerNodeItem2::setPlotInfo()
const, to make clear that the argument is copied.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The pictures of the current dive were plotted on the profile.
In principle OK, as this is what the user is shown. Only on
export this results in all profiles having the same pictures.
Therefore, pass a dive argument to the picture-plotting function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The thumbnails were fetched in the background to achieve a
snappier UI. The problem with that is that on LaTeX etc.
export only placeholder thumbnails were shown.
Therefore, implement a synchronous mode. This only tries
to fetch cached thumbnails or calculate thumbnails for
images. Videos and remote files are not supported.
Fixes#1963
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
With Facebook support gone, we should offer a way to export
the profile image. This has been part of the TeX support
but this makes it explicit.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Update the dive info box when toggling the chosen DC using the
keyboard. The keyboard toggle does not generate a mouse move
event, so this data was not repainted. For this, a
sub-optimization of not repainting when not moving the mouse
had to be removed. This does not impact ant performance
as 99.9999% of the calls of the repaint are caused by mouse
movement anyway.
Fixes: #1802
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Select the proper dives after the add, remove, split and merge
dives commands on undo *and* redo. Generally, select the added
dives. For undo of add, remember the pre-addition selection.
For redo of remove, select the closest dive to the first removed
dive.
The biggest part of the commit is the signal-interface between
the dive commands and the dive-list model and dive-list view.
This is done in two steps:
1) To the DiveTripModel in batches of trips. The dive trip model
transforms the dives into indices.
2) To the DiveListView. The DiveListView has to translate the
DiveTripModel indexes to actual indexes via its QSortFilterProxy-
model.
For code-reuse, derive all divelist-changing commands from a new base-class,
which has a flag that describes whether the divelist changed. The helper
functions which add and remove dives are made members of the base class and
set the flag is a selected dive is added or removed.
To properly detect when the current dive was deleted it
became necessary to turn the current dive from an index
to a pointer, because indices are not stable.
Unfortunately, in some cases an index was expected and these
places now have to transform the dive into an index. These
should be converted in due course.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This refactors the undo-commands (which are now only "commands").
- Move everything in namespace Command. This allows shortening of
names without polluting the global namespace. Moreover, the prefix
Command:: will immediately signal that the undo-machinery is
invoked. This is more terse than UndoCommands::instance()->...
- Remove the Undo in front of the class-names. Creating an "UndoX"
object to do "X" is paradoxical.
- Create a base class for all commands that defines the Qt-translation
functions. Thus all translations end up in the "Command" context.
- Add a workToBeDone() function, which signals whether this should be
added to the UndoStack. Thus the caller doesn't have to check itself
whether this any work will be done. Note: Qt5.9 introduces "setObsolete"
which does the same.
- Split into public and internal header files. In the public header
file only export the function calls, thus hiding all implementation
details from the caller.
- Split in different translation units: One for the stubs, one for
the base classes and one for groups of commands. Currently, there
is only one class of commands: divelist-commands.
- Move the undoStack from the MainWindow class into commands_base.cpp.
If we want to implement MDI, this can easily be moved into an
appropriate Document class.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For this, the core functionality of the split_dive() and
split_dive_at_time() functions were split out into new
split_dive_dont_insert() and split_dive_at_time_dont_insert(),
which do not add the new dives to the log. Thus, the undo-command
can take ownership of these dives, without having to remove them
first.
The split-dive functionality is temporarily made desktop-only
until mobile also supports "UndoObjects".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In commit bd0c99dfb7 (display pO2 and Setpoint for CCR dives)
the choice was made: when CCR than never a temperature graph.
While this seems reasonable, there is small group of mCCR
divers that do not log their po2 digitally, so the only po2
they can display is the setpoint that is reported by the used
DC. As this is a bit of a dull flat line, most of these
divers do not display this. And this leaves room on the
small mobile display for the temperature data.
So effectively: show temperature or po2 graphs.
Suggested-by: Peter Zaal <pzaal@xs4all.nl>
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
These were pointers into the global prefs object. The user must
not use these to modify the settings, therefore make them
pointers-to-const.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add class variable tooltip_position to qPrefDisplay
Add class variable lastDir to qPrefDisplay
qPrefDisplay is updated to use new qPrefPrivate functions
Adjust test cases incl. qml tests
qPrefAnimations only has 1 variable, that really is a display variable
Merge the variable into qPrefDisplay, to simplify setup (and avoid loading
extra page in qml).
correct theme to save in correct place, and make it a static
class variable
Signed-off-by: Jan Iversen <jani@apache.org>
This is another entry in the series to make more things
"const-clean" with the ultimate goal of merge_dive() take
const pointers.
This concerns functions taking pointers to events and
the fallout from making these const.
The somewhat debatable part of this commit might be
that get_next_event() is split in a two distinct
(const and non-const) versions with different names,
since C doesn't allow overloading. The linker should
recognize that these functions are identical and remove
one of them.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In a previous commit, the get_gasmix_* functions were changed to
return by value. For consistency, also pass gasmix by value.
Note that on common 64-bit platforms struct gasmix is the size
of a pointer [2 * 32 bit vs. 64 bit] and therefore uses the
same space on the stack. On 32-bit platforms, the stack use
is probably doubled, but in return a dereference is avoided.
Supporting arbitrary gas-mixes (H2, Ar, ...) will be such an
invasive change that going back to pointers is probably the
least of our worries.
This commit is a step in const-ifying input parameters (passing
by value is the ultimate way of signaling that the input parameter
will not be changed [unless there are references to said parameter]).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There were two functions for getting gas-mixes at a certain timestamp:
- get_gasmix() for repeated queries.
- get_gas_at_time() for a single query.
Since the latter is a special case of the former, simply call
the former in the latter. Moreover, rename to get_gasmix_at_time()
for consistency.
Replace on get_gasmix() call, which was outside of a loop by the
corresponding get_gasmix_at_time() call.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, get_gasmix_from_event() and get_gasmix() return pointers
to either static or to (possibly changing) dive data. This seems like
a dangerous practice and the returned data should be used immediately.
Instead, return the gasmix by value. This is in preparation of
const-ifying input parameters of a number of core functions, which
will ultimately let the merge() function take const-arguments in
preparation of undo of dive-merging.
On common 64-bit systems gasmix (two "int"s) is the size of a pointer
and can be returned in a register.
On 32-bit systems a pointer to the struct to be filled out will be
passed.
Since get_gasmix() now returns a value, the first invocation is
tested by a NULL-initialized "struct event *". Document this in
a comment.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
remove use of SettingsObjectWrapper::
remove include of SettingsObjectWrapper.h
use qPrefFoo:: for setters and getters
replace prefs.foo with qPrefXYZ::foo() where feasible
(this expands to the same code, but gives us more control
over the variable).
Signed-off-by: Jan Iversen <jani@apache.org>
remove PartialPressureGas from SettingsObjectWrapper and reference qPrefPartialPressureGas
update files using SettingsObjectWrapper/PartialPressureGas to use qPrefPartialPressureGas
this activated qPrefPartialPressureGas and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
remove TechnicalDetails from SettingsObjectWrapper and reference qPrefTechnicalDetails
update files using SettingsObjectWrapper/TechnicalDetails to use qPrefTechnicalDetails
this activated qPrefTechnicalDetails and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
SUBSURFACE_MOBILE does not include the single function that uses the variable
add #ifndef SUBSURFACE_MOBILE to avoid warning
Signed-off-by: Jan Iversen <jani@apache.org>
Paint a rectangle on top of thumbnails indicating the run-time
of the video.
Use the z=100.0-101.0 range for painting the thumbnails, whereby
the z-value increases uniformly from first to last thumbnail
(sorted by timestamp). The duration-bars are placed at z-values
midway between those of the thumbnails.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
9efb56e2d4 introduced rather complex
logic for picture drag'n'drop events onto the profile. Among other
things, the code had to check whether the picture actually belongs
to the displayed dive.
This can be simplified by transporting the dive-id in the drag'n'drop
event structure. The flow goes like this:
DivePictureModel--(1)-->DivePictureWidget--(2)-->ProfileWidget
For (1), we can use the Qt::UserRole role. This was used to transport
the picture-offset, but this is not needed anymore since ProfileWidget
was decoupled from DivePictureModel.
For (2), we simply replace the "position" value, which was never used.
Why would the receiver care which pixel was pressed in the media-tab?
This commit also contains a minor cleanup in DivePictureWidget:
QListView::mousePressEvent(event) was called in both branches of an
if and can therefore be removed from the if. This is so trivial,
that it doesn't warrant its own commit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
