If a merge mishap creates inconsistent data for a dive in git storage,
where the dive references a dive site that no longer exists, the app
would crash when trying to open the cloud storage.
I don't think a NULL dive could ever happen, but this seems fairly cheap
insurance.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Merge Jef's upstream into the Subsurface branch:
- support for new dive computers: Mares Pick Pro+, Deep Six Excursion,
Crest CR-4, Genesis Centauri and Tusa TC1.
- support freedive mode on Mares Smart Air
- work with Oceanic dive computers regardless of whether they need the
BLE handshake or not
- OSTC updates: support bigger BLE packets in newer versions, fix
setpoint in SCR mode
- Shearwater updates: full dive mode parsing, correct timezone handling
on Teric, support up to four transmitters on newer log versions.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When in the planner, ESC should cancel the plan.
However, when the user manipulates the dive-handles in the
profile and presses ESC, first nothing happens, then an obscure
message appears.
The reason is that ESC "shortcuts" are introduced in two places.
To fix this, remove the ESC shortcut in the profile (the planner
widget cancels the plan anyway) and replace all the shortcuts in
the profile with a simple override of the keyPressEvent().
The latter is not strictly necessary, but hopefully avoids further
complications with multiple shortcuts. And the code is easier
to follow too.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The formatting of the tooltips describing the columns
was repeated in two functions. Infuriatingly, there were
to minor differences: "Max. CNS" vs. "Max CNS" and
one version understood "Country".
Break that out into a single function to avoid these
inconsistencies and to save a few lines of code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In general, replace "dive master" by "dive guide".
However, do not change written dive logs for now. On reading,
accept both versions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
User report: when switching focus between windows, the
cursor position gets lost. This is due to a note-edit
command being fired, which then overwrites the notes tab.
To prevent this, don't update the notes field when placing
a command. Moreover, generally don't update the dive
selection when placing a command as that also rewrites all
the values.
Should this be extended to other fields?
Fixes#3365
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In multiple places we have the problem that when an undo command
is executed, the corresponding value-changed signals are emitted,
which in turn updates the UI. This can have nasty UI effects, such
as the cursor position in the notes field being reset.
To avoid this, add a flag that indicates whether a newly placed
command is currently executed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When the file system of the Zurich gets full, the only way to continue to
download from it, is to disconnect and reconnect the dive computer (which
resets the FAT file system that it emulates to 'empty').
This solution is rather hacky and weird because it does a hard count down in a
busy loop, but given the narrow use case, this may be acceptable.
This also adds support for the UEMIS_DIVE_OFFSET environment variable that
allows the user to skip dives on the device.
[refactored by Dirk Hohndel]
Signed-off-by: Oliver Schwaneberg <oliver.schwaneberg@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Coverity warning: divedatapoint::minimum_gas was not initialized
in DivePlannerPointsModel::addStop.
I don't know the meaning of that member variable and therefore
cannot tell if this was a real issue.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Two pointers were checked against NULL and then both were
dereferenced if at least one was not NULL. Of course, this
should have been an and, not an or expression.
That said, this is a semi-false positive, since both pointers
are set in the constructor and therefore never can be NULL.
In principle, one could remove the whole check. Of course,
realizing that would require a global analysis by Coverity,
which I reckon it doesn't do.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This cleans up the script a little and makes it more flexible to add other
output formats; and adds Markdown as one such format.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This removes a block of redundant code that was already broken
out into a helper function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the latest OSTC hardware, the Telit/Stollman bluetooth module has
been replaced with a u-Blox Nina B2 bluetooth module. The BLE
communication protocol remains roughly the same, except for a few minor
differences:
- New UUIDs for services and characteristics
- Only one common characteristic for Rx and Tx
- Credit based flow control is optional
- Credit value of 255 corresponds to a disconnect
[Dirk Hohndel: small edit to a comment]
Signed-off-by: Jef Driesen <jef@libdivecomputer.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The signature of draw() was changed to include "keepPlotData"
as an optimization.
The caller in draw() was not changed and now the plot data
is not recalculated, which means no plot data at all in
prints and exports.
The various boolean parameters should be replaced by flags.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In a40b40a the cylinder-hiding functionality was changed,
which made it necessary to keep track of the number of
cylinders. Ironically, that code was removed previously,
as it was redundant. The count was not readded to the
functions called by the planner, making editing of cylinders
in the planner impossible.
I wonder more and more if the models for planner and the
equipment tab should be changed. They are too different.
Fixes#3375
Reported-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The logic has just been completely broken when implementing
zooming.
Fixes#3376
Reported-by: Anton Lundin glance@acc.umu.se
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
- Restore the original standard gravity factor for Uwatec/Scubapro dive computers
- Garmin: Fix gas change event parsing
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This GitHub Action started failing. Groovy was EOL'ed six months ago and
downloads from the Ubuntu servers of Groovy components are no longer
supported.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Builds were failing because gradle tried to download libraries from
bintray. JCenter is shutting down in a few weeks.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was a user request: Sort bar charts by height of the bars.
Obviously, this can only work for categorical charts, not for
histograms.
The UI is a break from the old concept: the sorting is chosen
based on the chart, whereas for the rest of the features, the
viable charts are presented based on the binning, etc.
I found it confusing to have the possible charts be selected
based on sorting. I.e. if a non-bin sort mode is selected,
the histogram charts disappear. On the flip side, this would
be more consistent. We can change it later.
For value-based bar charts, there are three sort modes: by
bin, by count (i.e. number of dives in that bar) and by
value (i.e. length of the bar). This hopefully satisfies all
needs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In TestUnitConversion we used casts instead of the more common suffix
designations to indicate the type of those integer constants.
Worse, in commit efab955d85 ("cleanup: make feet_to_mm signed") the
return type of feet_to_mm() changed, but the value it is compared to
wasn't adjusted in the test which caused some builds with more
aggressive compiler flags to fail.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Depths are pretty much universally stored using signed integers
(e.g. depth_t is signed int). For consistency, make feet_to_mm()
likewise return a signed value.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The prev_time variable was defined as unsigned and mixed
with signed variables. gcc rightfully complains with -Wextra.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since these are std::strings anyway, there seems to be no point
in using the C-lib functions. YMMV, but to me that code is
distinctly more easy to parse.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
With -Wextra, gcc/g++ complains that compound initialization
of weightsystem_t misses the auto_filled parameter. Add it.
For C++ code we might think about writing a constructor. However,
we use two versions: with and without copied string.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In pscr_o2() the result of a double calculation was implicitly
converted to int, which resulted in a gcc warning.
Part of the expression was explicitly converted to int, but then
subtracted from a double.
Instead, do all the calculations in double and cast the final
expression to int. This is probably the prudent thing to do.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Pure bike-shedding:
The DiveTextItems of the DiveProfileItems were stored as raw
pointers. Instead, store them as unique_ptrs, so that they
don't have to be explicitly deleted.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The temperature graph connected directly to whatever was below.
Thus, the lowest temperature often was not clearly seen.
Add a general "bottom border" space to the main chart features
and set it to two pixels for the temperature and zero pixels
for the rest. Might need some fine-tuning.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The timestamp labels may change their format on zoom from
"mm" to "mm:ss", depending on the zoom level. Since the
animation kept old labels, this meant that one can end up
with a mix of labels.
Therefore, always reformat the labels. Of course, this
means that the labels switch instantaneously from one format
to the other. This is in conflict with the whole idea of
"smooth" animation. Such a smooth animation could be realized
by adding a "format" flag to the Label structure and keeping
thus fading in/out labels if the format changes. Do we want
that?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This prevented calculation of the pressure data when dragging
planner handles. However, this lead to weird artifacts.
As an alternative, if this turns out to be too slow, we might
disable the plotting of the pressure curves instead.
That said, even on my super-slow fanless laptop, this performs
reasonably.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In planner and edit mode, the cursor position is indicated using
crosshairs. They broke when changing to absolute scaling.
To fix them, remember the plot-area in the profile scene and
draw the crosshairs only inside this area (not on top of axes).
However, limit the position of the horizontal line to the
actual profile (dont paint inside the partial pressure, etc
graphs). The vertical line is painted above those graphs, so
that a timestamp can be related to partial pressure, tissue
loading, etc.
Also, set the z-value of the crosshairs. It was painted
inconsistently above some and below other chart features.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The axes are implemented by a line, which determines the
position. For axes without labels/grids this looks ominous.
For now, make the line invisible. But really, this should
be changed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old profile code didn't show the 0m label, because that
was cut off. This was lost when redoing the axis code.
Reimplement this. The code is very ugly: it recognizes the
depth axis by the fact that is the only "inverted" axis.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old get_maxdepth() function in profile.c was accounting for
two things:
- the partial pressure graphs
- rounding to sane value
Both are now taken care of by the profile itself. This leads to
excessive max-depths. Remove the code from profile.c.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
