Add property pressureUnit to use as BAR/PSI text.
Added slot to catch when user changes BAR <-> PSI.
Add Backend variables to Planning section.
Signed-off-by: jan Iversen <jan@casacondor.com>
Add surface_segment to plannerShared and then
update desktop-widgets.
Signed-off-by: jan Iversen <jan@casacondor.com>
desktop-widgets: use plannerShared for surface_segment
Change getter/setter for surface_segment to plannerShared, in
order to share the conversion with mobile diveplanner
Signed-off-by: jan Iversen <jan@casacondor.com>
Duplicate deco_mode to DECO_MODE, in order to make it available to QML.
Duplicate enum divemode_t to DIVE_MODE in order to make it
available to QML. Only part of the enum is made available.
Signed-off-by: jan Iversen <jan@casacondor.com>
Add bottompo2, decopo2 and bestmixend to QMLInterface
Bestmixend in gas options changing with
meter/feet
Signed-off-by: jan Iversen <jan@casacondor.com>
The real values are 1.0 to 10.0, but QML needs int so mobile
gets values 10.0 to 100.0
add sacfactor() to QMLInterface and update QML.
Signed-off-by: jan Iversen <jan@casacondor.com>
Move conversion cuft <-> liter from desktop-widget/diveplanner.cpp
to plannerShared, to facilitate the same results in mobile
diveplanner
Use Backend for bottomsac/decosac and update to check
for switch LITER <-> CUFT
Add bottomsac/decosac to QMLinterface.
Signed-off-by: jan Iversen <jan@casacondor.com>
Variables without conversion, do not need to pass plannerShared
(due to the QML interface).
Simple variables do not pass plannerShared, but diveplanner
in desktop-widgets and qmlinterface in mobile-widgets call the
implementation directly.
Signed-off-by: jan Iversen <jan@casacondor.com>
This replaces the C-code XML parsing with a Qt infrastructure.
QXmlStreamReader is used to parse the GPX file.
It also takes into account comments by @neolit123
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Catch when volume type is changed and update bottomsac/decosac.
Also update text l/min <-> cuft/min and add a space between value and unit.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Drop_stone_mode, when set, affect the descent rate, so place it alongside the
descent rate.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add simple variables, where getter uses prefs. and setters call directly to set
function (without using plannerShared).
rename last_stop --> last_stop6m
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Length variables are updated from the QML and desktop directly.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make notes rates available to QML through the Backend interface.
Remove the corresponding variables from plannerShared.
Getters are from prefs. while setters are linked to diveplan model.
Remark: signals from qPrefDivePlanner is used, because the diveplanner model
sets qPrefDivePlanner but do not issue special signals.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add option "-src-dir <source directory>" to build options.
When calling build.sh without -src-dir it uses src/subsurface as usual, but when called
with -src-dir <source directory>, it uses src/<source directory> as source basis.
This is a needed option, when working with "git worktree", which is used when working on
different branches in parallel (e.g. master and my-feature-branch), because it allows a
build directory in each worktree, and thus much faster when switching work.
Signed-off-by: jan Iversen <jan@casacondor.com>
For METRIC and IMPERIAL, show the radiobuttons disabled
For PERSONALIZED, allow user to select individual units.
Signed-off-by: jan Iversen <jan@casacondor.com>
This shouldn't be part of the desktop UI code; there's still the issue that we
really shouldn't hand code XML parsing, but I'll leave that for later.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows Subsurface to obtain the coordinates of a dive directly
from a GPS track. It parses a GPX file (GPX V1.0 or V1.1) from
a GPS to locate the trackpoint immediatedly after the start of a
dive. There is an additional "Use GPS file" button in the Edit Dive
Site panel that is selected from the Notes tab. Image:
This allows one to select a GPX file, bringing up the Import GPS
dialog.
There is extensive provision for cross-checking that the dive track
synchronises with the dive start and end. If the Save button in the
dialog is pressed the dive coordinates are copied into the Dive
Coordinates text box in the Edit Dive Site panel. The map moves
to indicate the location of the dive site.
The bulk of the work is done in importgps.cpp. The code is
pretty intergrated: I tried to break it up in smaller commits but that
was not feasible.
The code includes responses to the comments by @neolit123 and
@bstoeger. The C-based file input was replaced with Qt-based
code using QChar, QString and QFile.
[Dirk Hohndel: fixed several small issues in the .ui file, removed
various headers includes that weren't needed and
fixed printing of minutes as zero padded]
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Ascent/Descent rate functions are fully implemented in diveplannermodel,
therefore remove these functions.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use Backend instead of Planner for ascent/descent variables.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make ascent/descent rates available to QML through the Backend interface.
Remark signals from qPrefDivePlanner is used because the diveplanner model
sets qPrefDivePlanner but does not issue its own signals.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Change ascent/descent setter function names to set_<name>Display
to show the value is prepared for displaying (common for desktop and QML).
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The spinboxes are already connected to diveplannermodel set_ functions, remove
second connect to plannerShared.
Change get functions to use diveplannermodel.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
diveplannermodel already contains set_<asc/desc> function that convert from
screen value to real value; this adds get functions that convert real value to
screen value, so now all conversions are done in one place.
Use prefix Display to identify this is values prepared for the UI (both desktop
and QML).
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
prefs.unit_system is set at the top, so no need to set it again.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
prefs.unit = x needs to be after the setters are called, otherwise the setter
will not do anything, and result in an inconsistency between the values stored
on disk and in prefs.units.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove string version of unit_system, duration_units, length, pressure,
temperature, vertical_speed_time, and volume, including tests and make signals
strongly typed in C++
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Register enums to allow them to be used in signal handlers instead of int.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Change Settings and DivePlannerSetup to use the strongly typed enums
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add qPrefUnit Q_PROPERTY but using QMLInterface enums, that way
all variables become strongly typed in QML.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Create section advanced around the remaining gridlayouts, and adjust.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move gridlayout unit_settings to TemplateSection units, without changing
anything (apart from adding a visible: attribute).
Removed first label in units_settings, since it is the title of the section
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move gridlayout themesetting to TemplateSection theme and use the
TemplateTitle. Also switch from using PrefDisplay.mobile_scale to
subsurfaceTheme.currentScale
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
move gridlayout divecomputers to TemplateSection general, without changing
anything (apart from adding a visible: attribute and replacing the Rectangle
used to draw a line at the bottom with a TemplateLine on top.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
move gridlayout defaultCylinder to TemplateSection general, without changing
anything (apart from adding a visible: attribute and replacing the Rectangle
used to draw a line at the end with a TemplateLine at the top).
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
move gridlayout cloudSettings to TemplateSection general, without changing
anything (apart from adding a visible: attribute and removing the rectangle
used to create a line).
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
ColumnLayout does not work well with TemplateSection,
so change to Column
Add TemplateSection "General Settings"
"General Settings" are open when visiting page first time.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
bump import versions to reflect Qt 5.12
and remove unused imports
remark QtQuick 1 and QtQuick.Controls 1 are depreciated since Qt 5.12
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace Control.TextEdit with TemplateTextEdit, in order to use
common font/color scheme.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace Control.ComboBox with TemplateComboBox, in order to use
common font/color scheme.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
