This is much friendlier than just showing an empty profile. I picked a
nice and simple three level dive. 25 minutes at 18m, 15 minutes at 9m, and
a safety stop.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This gets things mostly right.
It creates a dive and uses the planner widget to create samples which are
copied into the dive. It fills in some reasonable defaults (DC model,
timestamp), but doesn't allow editing the timestamp (or the temperatures
and air pressure).
On accept the planner gets reset and the dive appears correctly in the
dive list.
Cancel still needs to be handled.
And I bet there are many subtle bugs lurking here and there. But it's a
start.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This looks like it might work, but since we keep recreating the dive, the
info entered in the info pane is actually lost. But it's a step in the
right direction.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Right now this is just calling the same code and setting a flag whether we
are planning or adding a dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is really nice to have when looking at specific coutures of a dive
or events.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fixes a crash in the current Qt subsurface code that can happen
after downloading dives from a dive computer, and the new dives merge
with old dives, causing the old dives to be re-allocated into the
merged one.
In that case, the list widgets don't get fully updated, and contain
stale pointers to old dives that no longer exists. Doing anything that
refreshes the display will hide this problem, and you do need to have
multiple dive computers on the same dive to trigger it in the first
place, so it's reasonably hard to hit, but very annoying when you do.
This patch just makes us reload all the dive UI tables, which may be
overkill. It also doesn't actually fix the fact that we seem to do
"process_dives()" within the context of the downloader thread, which
looks like a possible source of races. The "process_dives()" should
also be moved to the main thread, but needs the preferDownloaded()
information that is part of the download window, so it doesn't fit
here. Somebody else (Tomaz?) will hopefully fix that part.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Plug the cancel action on the dive planner ( before that, only by
hitting the 'ESC' button things worked, so now you can also click
on the Cancel box that's on the right of the planner profile window.
Also, the beginning of the 'ok' code is also at place.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The code to initialize the weight systems from the last datafile loaded
had not been brought over from the Gtk version.
We now correctly update the data structure when loading file (but not yet
when editing values).
Most likely the same needs to be done for the tanks as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The Command line execution of Subsurface happened before the
GUI was created, this leaded to various bugs by me(tm) over
time. This patch seems to fix all of those, by reusing the
same code for GUI interaction and CommandLine interaction.
I had to rework how the main.c worked, it used to be C code
calling C++ code, and this is non desirable, since C doesn't
really understand C++.
I Moved all of C-related code to 'subsurfacestartup.c/h' and
created a tiny wrapper to call it, so all of the C code is still
C code, and the new main.cpp calls the mainwindow->loadFiles and
mainWindow->importFiles to get rid of the bugs that happened before.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Merged the shared code for the three table views into
one code, this way less code is needed if we need to
construct another tableview in the future.
I still need to clean some of the models too.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added a new widget to control the DivePlanner, now we
have two widgets, a graphics one and a qt sidget based one.
the Technical divers will most likely use the QtWidget one
while the hobbists will most likely use the QGraphicsView
one. there's not a option to choose one, they both will
appear at the same time.
Next step: make the screens to work.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Looks like the QTextBrowser can't render the manual correctly.
Also, QWebView provides a better way to find contents on a webpage,
which is an important feature for an user manual (to be implemented).
Signed-off-by: Danilo Cesar Lemes de Paula <danilo.eu@gmail.com>
PrintOptions is a QWidget class to be used as an
addition to a future print dialog (possibly based on
QPrintDialog). Currently only contains a couple of
radio buttons.
PrintDialog (printdialog.cpp/h) which is a basic QDialog
is currently added for testing only and it holds
an instance of PrintOptions.
Calling File->Print opens this test dialog for now.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
While in zoomed mode and when resizing the splitters or
switching views the profile tooltip can end up being at the
wrong location and also the zoom state becomes corrupt,
so perhaps the entire transformation needs to be reset.
To prevent the bug we listen for relevent to the profile
splitter resize event, view changes and clear()/plot() the
entire profile graphics.
This is an slow/expensive solution and perhaps there are
cheaper alternatives e.g. updating only the scene rectangle
and tooltip, somehow.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the left / right shortcuts for moving the handlers around in time,
this also made me wonder why we have the 'previous dc' on the menu, it
got actually to broke my code on the shortcuts for the planner because
they are active everytime - should they be active only when the profile's
visible or they serve any other purpose?
If they serve only for the profile, I'll get them out of the menu and
put them in their proper place - the profile view.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Most child windows should be closed with the main application
window otherwise if left open and if making specific
modifictions could potentially cause a SIGSEGV.
To solve that we mark all custom windows/dialogs with
the Qt::WA_QuitOnClose attribute on instance creation.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now, activating the dive planner will hide the profile
and show the planner on the same place. we still need
a way to 'cancel' or 'accept' the profile created.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
1) Make a call mark_divelist_changed(TRUE) when the user adds new
cylinder or weight entries.
2) Call mark_divelist_changed(FALSE) in
MainWindow::on_actionClose_triggered() so that each time after
a file is closed or a new one is created it does not ask immediately
the user for a save confirmation for the blank file/divelist.
3) Call mark_divelist_changed(TRUE) once a dive's geo location
has changed in GlobeGPS::changeDiveGeoPosition().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There are a couple of problems with said icons:
- When the Equip. tab is first seen, no relative event is monitored
so that the correct position is updated and the icons are positioned.
To solve that we connect the signal MainTab::currentChanged(int)
and call MainTab::equipmentPlusUpdate().
- When the info-profile QSplitter resizes with a snap towards/from
the edges of the main window, no resize handler is called such as
MainTab::resizeEvent().
A solution is to monitor the resize of the info-profile splitter
with MainWindow::on_infoProfileSplitter_splitterMoved() and again
call MainTab::equipmentPlusUpdate()
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If a file has been opened from the command line or via the File
menu the main window title becomes "Subsurface: filename.ext".
Title also updates if 'File->Save As' is called. "Subsurface" only
is displayed when no active file is present or post 'File->New'
or 'File->Close'.
To make this work a new public method is added - MainWindow::setTitle()
and also an enum type MainWindowTitleFormat, which should allow
more complicated formatting, such as showing the selected dives
or the total number of dives (e.g. MWTF_FILENAME_N_DIVES).
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For viewing the Globe section (pane) we need to collapse
both the 'list' and the 'main' splitters.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
File->New in the GTK version performed the same as File->Close.
Creating a new file may also ask the user if the current file has
to be saved.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Similar to File->Open but for multiple files and without
calling on_actionClose_triggered().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The dialog is similar to the one in the GTK version
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the first files and skeleton code for the visual
dive planner. now I need to fill things. The code is
using the print action borrowed, this will need to move
to a better choice in the future.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This data structure was quite fragile and made 'undo' when editing
rather hard to implement. So instead I decided to turn this into a
QMultiMap which seemed like the ideal data structure for it.
This map holds all the dive computer related data indexed by the model. As
QMultiMap it allows multiple entries per key (model string) and
disambiguates between them with the deviceId.
This commit turned out much larger than I wanted. But I didn't manage to
find a clean way to break it up and make the pieces make sense.
So this brings back the Ok / Cancel button for the dive computer edit
dialog. And it makes those two buttons actually do the right thing (which
is what started this whole process). For this to work we simply copy the
map to a working copy and do all edits on that one - and then copy that
over the 'real' map when we accept the changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Yearly stats are being displayed. the code is similar to the GTK one,
but I advise the reader that it's a bit risky ( I got an unreproducible
crash but it seems to be fixed now. ). The selection behavior is *weird*
and I have no idea why, but I'm very sleepy - will try to look at
it again tomorrow.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This simply creates a view to show the model, while doing that
I noticed that the model header wasn't showing, so I fixed it too.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
So, I changed a lot of code to reduce boilerplate on models in the
future. Currently we do not have a lot of models, but this can increase
quite rapdly. There's a second TreeModel in the works, the Yearly
Statistics, this patch will save around 250 LOC for this new model,
and more and more models will give us a greater saving.
Iwll do that for the table models in the future too - I did the tree
models now because they are the most complex case and I didn't wanted
to create a second tree model without this.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This code adds a Renumber Dialog, that's most a copy & paste
of the GTK visual, I didn't tried to do anything fance with it,
but I still dont like how it looks like. a better management
form is needed. :)
( Well, actually my dislike is mostly because it's on a menu
and it's on a popup, I think a 'toolbox' should exist to hold
all of those widgets that don't belong to the menu - will try
that later )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Fixed the show / hide dialog shortcuts to take the splitter into consideration,
So, here's the deal.
We have a few QSplitters that takes care of helping us with the
size of a few widgets, they are ok, and we should continue using them
to manage the visibility of them too. But the way that we did before was to
widget->hide(); something, and if you hided something using the splitter,
by holding it's handle and collapsing the widget, then you used the 'ctrl+number'
shortcut to show it, it whould only show a gray panel.
This patch makes everything behave using the splitters.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
For consistency I didn't change the meaning of Ctrl-1/2/3/4 and added
this as Ctrl-5 - but one could just as easily make the argument that
"ViewGlobe" should be Ctrl-4 and "ViewAll" should be Ctrl-5.
This ensures that only one of the four widgets is shown in the
individual modes, but it doesn't address the drawing issues with the
profile.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added a simple TextEditor in the graph for the 'Dive Plan' mode,
this text editor is very simple, so the user can double click on
'depth' or 'duration' to set the depth or duration of the dive.
Since this was a test, only 'duration' was done, and I'll add
duration on the next commit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch adds a dive from the menu, it's the dive that will
be used to add a new dive plan. so, I also removed the option
'add imput plan' from the menu.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Ticket 127 mention that context menu is fixed on imperial mode, which is
partial true. Context menu only not have the changes on header model updated
when preferences are chenges during execution. Hard to note because if
program is closed and opened again, the context is initialized properly.
Since actions aren't bound to the header model, we need iteract of current
items and change the title.
Signed-off-by: Helio Chissini de Castro <helio@kde.org>
Last open dives directory is stored in settings, so no need to walk through all
subdirectories all the time.
Signed-off-by: Helio Chissini de Castro <helio@kde.org>
Created a new dialog, Edit Divecomputer, it will currently only lists
the divecomputers that are used on the xml file. I used the same method
that the gtk version used, but only 2 divecomputers got visualized in the
dirk dive data. I'll assume that it's correct and will fix it in the next
couple of commits.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added initial support for download dive info from subsurface web service,
the current code only downloads and output the xml downloaded in the debug
area. Now I need to parse things up and plug the unplugged stuff.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Don't call refreshDisplay() after preferences change. This strangely
somehow leads to a situation where I need to move the mouse over the dive
list before changes to the units are reflected.
When calling reload() do not force layout change / resort unless that is
the intention.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These changes should be correct - but they still don't fix the problem
that after we click 'OK' on the preferences (regardless of whether any
changes were made), the first dive is set as current dive and shown in the
map window.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The check to only update the dive if there were already dives selected
before seems bogus. I'm sure I put it there for a reason but it seems
flat out wrong.
This gets triggered when you select a trip by clicking on the trip
header. In that case all dives get unselected (amount_selected = 0) and
then we try to select the first dive in the trip - which fails because
of this check.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This function was supposed to take the default_prefs into account but
clearly wasn't.
Now it should be much more readable and maintainable.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Things got broken. Again. We no longer kept track of the selected dives in
our structures which broke statistics.
This attempts to fix that, but appears to still have a bug when selecting
trips. Sometimes this results in 0 dives being selected according to our
data structures, while Qt happily shows all dives of the trip as seected.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code so far had completely ignored Metric / Imperial. Turning this
into a three way radio box seemed to make much more sense.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a helper function to determine the Subsurface data directory
(are we running from build directory? installed on Linux? installed on
Mac? - still need to add support for Windows). This same function is
then used by both the setup for Marble and for the help browser.
This assumes that the user-manual.html file has actually been built and
installed (which we don't do by default with the current Makefile).
Right now there are rendering issues with our manual in the help browser
widget - I'm sure this can be fixed...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added a preliminary support for a manual display widget,
it's a very basic HTML text-browser, so it can have
hyperlinks, images and everything that a 1995 browser
has.
The long term plan is to subsittute this manual by
a more modern 'help' using QGraphicsView, that will
interact on the application level.
See #121
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
I think that displaying tissue loadings either as pressure or as
percentages is not very intuitive but that it makes much more sense when
translated to ceiling depths.
This change enables just that for the 16 tissues in our calculated ceiling
and visualizes this in the profile graph.
There is a checkbox in the preferences to turn this on. If enabled, all
tissues having non-trivial ceilings are also shown in the info box.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The download already worked, but we didn't display the new dives. This
introduces a new slot for MainWindow that updates what is displayed in
Subsurface after files were imported.
With this change we can successfully download ONCE - but when trying to
download a second dive the dialog doesn't appear to get refreshed the
right way - the OK button doesn't appear to work anymore (Cancel however
does).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the red dc ceiling as preference option.
Hooked them all up together so the sub-preferences are enabled when the
master preference is set (for 3m and red ceiling).
Use the options in the profile plotting functions.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The biggest problem here was that bool has different sizes in C and C++
code. So using this in a structure shared between the two sides wasn't a
smart idea.
Instead I went with 'short', but that caused problems with Qt being to
smart for its own good and not doing the right thing when dealing with
'boolean' settings and a short value. This may be something in the way I
implemented things (as I doubt that something this fundamental would be
broken) but the workaround implemented here (explicitly using 0 or 1
depending on the value of the boolean) seems to work.
I also decided to get rid of the confusion of where gflow/gfhigh are
floating point (0..1) and when they are integers (0..100). We now use
integers anywhere outside of deco.c.
I also applied some serious spelling corrections to the preferences
dialog's ui file.
Finally, this enables the code that selects which partial pressure graph
to show.
Still to do: font size, metric/imperial logic
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The imperial/metric super setting doesn't have any effect. But changing
the individual units now works and is tracked. And causes the display to
change after clicking "OK" (but not yet when clicking "Apply").
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Several changes:
- split the reload of the DiveListView from the reload of the header
- don't include the column title in the name of the setting; the title
will change depending on the units and localization chosen by the user
- rename the slot that toggles visibility to make the code more readable
- use setCollumHidden() method to simplify the code
- don't save the width of hidden columns (as they would be saved as zero
width and can then no longer be enabled)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The "no dive location" message box was displayed above the marble
widget, which made the layout splitter move horizontally.
Made the message box as an overlay on the map instead.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Dirk asked me to try to make it more modern, so I
used as a base, the Firefox preferences. currently
it saves / loads the preferences, and also smits
a signal 'preferencesChanged' that should be connected
to anything that uses preferenes, via the PreferencesDialog::intance()
object. In the future, I plan to make it have a signal / slot for each
member that changes.
I also moved the icons to a new folder this time, because the
amount of icons is now more than just two, and it was
becoming messy.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Don't Save/Cancel/Save is less ambiguous than OK/Cancel/Save. Also
being slightly more verbose when creating the QMessageBox.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of passing pointers to GError around we pass just pointers to
error message texts around and use kMessageWidget to show those. Problem
is that right now the close button on that doesn't do a thing - so the
error stays around indefinitely. Oops.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This also changed a bit the behavior on how the QSettings are managed,
till now, we used the QSettings constructor passing the name of the
software and the 'company', but this is now default - so there's no
need to pass anything by the QSettings contructor.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Ordering here is important - we can't resize the columns before they are
created. On the other hand this now means that we explicitly need to
expand to the first dive shown.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the skeleton code for a non-blocking ui-thread
It already creates the first-thread ( 'do not block the ui' )
and the second thread ('download from the dive computer')
We can in the future merge both in the same place - I didn't
want to do that now because the download function is written
in the libdivecomputer.c code, and I cant just transform that
to a QThread and use signals, so I used two threads for that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This allows us to do the right thing at exit (and also connects to more of
the menu actions to actually do something).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We want to give the user the option to 'cancel' and not exit the program,
to 'save' the file, or to say I'm 'OK' with losing the unsaved data.
This does NOT implement the actual save / save-as, yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is to prevent loss of data, so if the user is editing something,
either cancel the edition or save it, to continue moving around on
the Dive List. - Only the dive list is affected, user can still
play with the globe and the profile.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Borrowed the code from KMessageWidget from Aurelian Gateau, Kdelibs,
to better show passive information and notifications. instead of a
popup blowing in the user's face, a nice, animated and well designed
widget will gracefully fade-in, show the notes, and fade out when
not needed anymore.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The marble widget now shows the dive locations
and also will center on the dive that the user clicked
in the dive list.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch fixes loading a second dive-file after the first
one had been loaded. it simply clears some information and
makes sure that the current selected dive is invalid when
the file closes. I also did a bit of code cleanup on this one
to make things simpler in the future.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The selected dive was being set to zero when the program
started, but zero is actually the first dive. There
were workarounds on the gtk code for that probably
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
And rip out all the code that Dirk put there to do that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Figure out what is our first selected element (in case we start out from a
multiple selection) and then move to the next logical element. So the code
traverses an expanded tree (from a trip 'down' to its first dive or 'up'
to the last dive of the previous trip - and similar from a first dive in a
trip 'up' to its trip and from a last dive in a trip 'down' to the next
trip.
This does not take 'shift-cursor-up/down' into account (i.e. manual
selection extension). Instead with just cursor up and down a single dive
(or single trip) is selected.
My guess is that the code will make someone's eyes bleed. Be warned.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If a user clicks on a trip, all the dives in a trip should be selected.
But if a user selects a range of dives that happens to have a trip header
in it, then only the range of dives should be selected (the trip header is
marked as 'selected' for visual consistency, even though not all dives in
this trip are selected).
This also changes the code to scrollTo the first selected dive instead of
just expanding the parent. This seems to give us a more pleasant visual
appearance (trying to keep the selected dive centered in the dive list)
and as a side effect no longer hides the first dive trip at program start
(before this change the first dive in the first trip would be the top
entry in the dive list, with its trip just out of sight above).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't have a UI to set it, yet, so you have to manually set it in the
config file, but once you do that it works...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Establish some useful helpers and use them when updating the values.
One of the helpers (from statistics.c) puzzlingly doesn't link - so that's
ifdefed out.
Also had to re-arrange the settings reading code (it came too late) and to
extract the expanding code of the top dive from the settings reading code
(as it had no business being there to begin with).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So, this is what happens now:
Every tab should be populated from updateDiveInfo method, it will be
called whenever a new dive is selected
I'm already populating the 'notes' box to show how it can be done.
If you are unsure what's the name of anything, open the file maintab.ui on
the designer, click on the item and check its objectName, the access is
ui->objectName from here on.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add shortcuts to match GTK version for view menu items and the log menu
so that e.g. Ctrl+1 selects the list view.
Remove debug statements from the view functions. Leave in place for
functions with no obvious actions yet coded.
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is missing the char * based settings (as I have no idea how to do
those) plus the map provider. Everything else should work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This small patch adds a new class - ProfileGraphicsView
it's a QGraphicsView based class that will holds all
graphics-items for the plotting.
The setup is simple, just call ui->ListView->plot( dive ) ( that's
already a ProfileGraphicsView and magic will happen.
Since Im using a QGraphicsView , the size of the canvas doesn't
matter and I'm fixing it at 0,0,100,100. when a resize is done,
the resizeEvent will be called, fitting the scene's rectangle on
the view.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now it correctly uses the existing helper functions and keeps our idea of
the selection consistent.
There is a small behavioral change compared to the Gtk code. Range
selections no longer have the last dive clicked on as selected_dive but
instead the dive with the highest index that was selected. I don't think
that is a major issue for anyone.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
