Now that we have defined addition and subtraction on unit
classes, let's use them in a few examples.
Yes, some of these are a bit pointless, because they are
of the kind
a.mbar - b.mbar => (a-b).mbar
However, these probably should be further simplified
by storing the result in a unit type.
This commit is mostly a proof-of-concept.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was quite ominous: a 60-element fixed size table was
passed as argument to plan(). But there was no check for 60
anywhere? Use a dynamic vector instead.
The whole thing is weird, as the depth of the decostop table
doesn't seem to be used.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Improve the event loop architecture by making it set the divecomputer in
the constructor - using the same loop for multiple dive computers is not
intended to work.
Also change `next()` in `divemode_loop` to `at()` to make the name more
aligned with its function.
Signed-off-by: Michael Keller <github@ike.ch>
Fix an interger overflow warning when parsing setpoints.
@bstoeger: In the end it turned out that this parser was only used in
one place in the planner UI, and it was simplest to switch this to
using `QVariant.toFloat()` in the model itself, which is consistent how
the rest of the input values is parsed and validated.
Signed-off-by: Michael Keller <github@ike.ch>
This has become a bit of a catch-all overhaul of a large portion of the
planner - I started out wanting to improve the CCR mode, but then as I
started pulling all the other threads that needed addressing started to
come with it.
Improve how the gas selection is handled when planning dives in CCR
mode, by making the type (OC / CCR) of segments dependent on the gas use
type that was set for the selected gas.
Add a preference to allow the user to chose to use OC gases as diluent,
in a similar fashion to the original implementation.
Hide gases that cannot be used in the currently selected dive mode in
all drop downs.
Include usage type in gas names if this is needed.
Hide columns and disable elements in the 'Dive planner points' table if
they can they can not be edited in the curently selected dive mode.
Visually identify gases and usage types that are not appropriate for the
currently selected dive mode.
Move the 'Dive mode' selection to the top of the planner view, to
accommodate the fact that this is a property of the dive and not a
planner setting.
Show a warning instead of the dive plan if the plan contains gases that
are not usable in the selected dive mode.
Fix the data entry for the setpoint in the 'Dive planner points' table.
Fix problems with enabling / disabling planner settings when switching
between dive modes.
Refactor some names to make them more appropriate for their current
usage.
One point that is still open is to hide gas usage graphs in the planner
profile if the gas isn't used for OC, as there is no way to meaningfully
interpolate such usage.
Signed-off-by: Michael Keller <github@ike.ch>
Also, turn it to use std::string instead of writing into a
global(!) buffer. This was not reentrant.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Feels natural in a C++ code base.
This removes a nullptr-check so some care has to be taken.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This function implicitely accessed the global divelog. To make
that explicit make it a member of dive_table, such that the
caller must access it via the global variable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is a humongous commit, because it touches all parts of the
code. It removes the last user of our horrible TABLE macros, which
simulate std::vector<> in a very clumsy way.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This had to be done simultaneously, because the table macros
do not work properly with C++ objects.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since struct divecomputer is now fully C++ (i.e. cleans up
after itself), we can simply turn the list of divecomputers
into an std::vector<>. This makes the code quite a bit simpler,
because the first divecomputer was actually a subobject.
Yes, this makes the common case of a single divecomputer a
little bit less efficient, but it really shouldn't matter.
If it does, we can still write a special std::vector<>-
like container that keeps the first element inline.
This change makes pointers-to-divecomputers not stable.
So always access the divecomputer via its index. As
far as I can tell, most of the code already does this.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is a rather long commit, because it refactors lots of the event
code from pointer to value semantics: pointers to entries in an
std::vector<> are not stable, so better use indexes.
To step through the event-list at diven time stamps, add *_loop classes,
which encapsulate state that had to be manually handled before by
the caller. I'm not happy about the interface, but it tries to
mirror the one we had before.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is a hairy one, because the sample code is rather tricky.
There was a pattern of looping through pairs of adjacent samples,
for interpolation purposes. Add an range adapter to generalize
such loops.
Removes the finish_sample() function: The code would call
prepare_sample() to start parsing of samples and then
finish_sample() to actuall add it. I.e. a kind of commit().
Since, with one exception, all users of prepare_sample()
called finish_sample() in all code paths, we might just add
the sample in the first place. The exception was sample_end()
in parse.cpp. This brings a small change: samples are now
added, even if they could only be parsed partially. I doubt
that this makes any difference, since it will only happen
for broken divelogs anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Makes the code much nicer to read.
Default initialize cylinder_t to the empty cylinder.
This produces lots of warnings, because most structure are now
not PODs anymore and shouldn't be erased using memset().
These memset()s will be removed one-by-one and replaced by
proper constructors.
The whole ordeal made it necessary to add a constructor to
struct event. To simplify things the whole optimization of
the variable-size event names was removed. In upcoming commits
this will be replaced by std::string anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently editing of planned dives that have been merged with actual
(logged) dives only works if the 'Planned dive' divecomputer is the
first divecomputer, and this divecomputer is selected when clicking
'Edit planned dive'. In other cases the profile of the first
divecomputer is overlaid with the profile of the planned dive, and the
first divecomputer's profile is overwritten when saving the dive plan.
Fix this problem.
Triggered by @SeppoTakalo's comment (https://github.com/subsurface/subsurface/issues/1913#issuecomment-2075562119): Users don't like that planned dives show up as their own entries in the dive list, so being able to merge them with the actual dive after it has been executed is a good feature - but this wasn't working well until now.
Signed-off-by: Michael Keller <github@ike.ch>
Fix some findings in a Coverity scan in `core/planner.cpp` and
`core/profile.cpp`, that were reported as new after the changes
in #4126 (likely because of the rename from .c to .cpp).
Results: https://scan4.scan.coverity.com/#/project-view/60459/13160
Signed-off-by: Michael Keller <mikeller@042.ch>
In C++ files, replace MIN and MAX by std::min and std::max,
respectively. There are still a few C files using these
macros. Convert them in due course.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This used to have multiple values, but is currently only checked for
true/false. Reflect that in the type.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The deco timestep is a parameter to the plan() function. There
seems no need to define this as a global macro. Probably some
code reshuffeling artifact.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
