Open dive file. Click Location-manage. Pick a site. Click close. Click
Location-manage again. BOOM.
This seems to make sense, but since not a lot of the code is hooked up
yet, I'm not sure this is what we want in the end. But for now it prevents
an easily reproduced crash.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The SimpleWidgets file was getting too big, and location information will
also need a new model - a good way to do not mix everything is to put
things in a new file.
[Dirk Hohndel: added missing include of stdint.h]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a few interface items to handle location editiing, a combobox to show
everything, and three buttons: add, edit, delete.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The layout was just plain ugly; this fixes that and also adds the
possibility to insert new controls that will be userfull for managing the
Locations.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The maintab should be disabled when the geolocation thread is
running - but if you changed the dive, it would reenabled it.
(actually this should be only on the location widget, I'll send
another path later)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I don't know what happened to me, I connected to some signals that didn't
exist at all.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For free dives (corresponding to dive mode or duration shorter than
15min), the display format for duration is changed to display minutes
and seconds.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Divesoft Freedom records the dive time in count of seconds since
1.1.2000 00:00:00, not noon.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While this worked on Linux, on the Mac we didn't have an input field to
enter the file name. With this we explicitly declare that this is a file
save dialog and that the user can specify a non-existing file name.
Fixes#872
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So just like tags do "differential editing". Figure out what (or in this
case, who) was added / removed from the displayed dive and do the same for
all other selected dives.
This does seem a bit over top for divemaster, but this is more consistent
and therefore should make more sense to the user - assuming we ever have
one who runs into this.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As a side effect this changes the signature of plan(): Before it
returned an int that was supposed to be possibly an error but
we never bothered to check it. So now it's bool indicating if the
planner did add stops.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The initial selection change signal seems to potentially be sent
before the listview is even visible when we do the first "scrollTo()"
to the currently selected dive.
That, in turn, seems to result in that when the listview is actually
shown, it will be scroll the trip description off the visible area,
and force the current dive to be shown at the very top of the
divelist. Which is not very nice: we do want to scroll to the current
dive, but we don't want to hide the current trip in the process.
Ignoring the selection change if the listview isn't even visible seems
to fix things for me.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes Collapse All only visible when its needed, and it
also fixes a crash when invocking collapse all when there was
nothing to collapse.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch unclutter the menu by hidding collapse all
when all dives are collapsed, and expand all when all
dives are expanded.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes Subsurface usable faster for those without a good internet
connection when they are opening an older data file.
While parsing, we are only feeding an vector of locations, after the
parsing is done, we traverse the vector searching for the information on
the web.
I need to also add a way to stop if there`s no internet connection - but
this will be another patch.
Also, fixed two small memory leaks from the old imp.
[Dirk Hohndel: cleaned up the whitespace mess]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
... but discard an old disclaimer and runtime table if present.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is to avoid visual clutter when replanning logged dives.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If there are more than 100 samples, average some of them so we end up with no more than 100.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As the gas changes can be parsed more reliably from the gases list, we
just ignore the gas_change events as redundant information.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Gas change events can be parsed properly from the gases list with clear
information on what the gas mixture was.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This includes all the data computer related data within the divecomputer
tag. All the extra noise is just indentation (apart from moving the
divecomputer end tag).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Next commit will do indentation so this one will keep it clear of what
actually occurs.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This includes all the data computer related data within the divecomputer
tag. All the extra noise is just indentation (apart from moving the
divecomputer end tag).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Next commit will do indentation so this one will keep it clear of what
actually occurs.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Rounding always up should give us sensible sample interval as EON Steel
adds extra samples.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The logic to select samples from EON Steel for divelogs.de export is the
following:
- Ignore sample at time zero, as that is surface, and the second "odd"
sample contains information we are interested in
- Grab the second sample, first sample with pressure and temperature
readings
- Grab the third sample - "grand parent" is 0, thus our first interval
sample
- Grab the samples when the predecessor (or grand parent) is at least 10
seconds away
This logic seems to produce reasonable results when exporting EON Steel
logs to divelogs.de. Naturally there might be corner cases, that are not
taken into account, but this basic logic seems reasonable in normal
cases. (Unfortunately analysis is done based on a single dive.)
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This sets the Suunto EON Steel sample interval to 10 seconds when
exporting to divelogs.de.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old behavior was kind of crude. Just smack the tags that were on the
displayed dive on all selected dives.
This seems to make more sense. We figure out which tags were added to the
displayed dive and add them to all selected dives. And we remove all tags
that were removed from the displayed dive from all selected dives.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
taglist_added() simply figures out the tags that are in the new list but
not in the original list.
taglist_dump() makes debugging things easier.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
