* Initialize variable members in DiveCartesianAxis class.
Note: Initialized values I put needs to be doublechecked.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* Initialize DivelogsDeWebServices::uploadMode in initialize list, instead
of constructor body expression.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* Change 'searchBox' member type from 'QLineEdit *' to 'QLineEdit'
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
All of these are now set from the toolbar next to the new profile. This
removes functionality for people using the old profile, but as we will rip
that out and switch to the new profile, soon, that seems an acceptable
side effect.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Load all the settings in the PreferenceDialog constructor. Previously
all the settings were overwritten with default values the first time
PreferencesDialog::syncSettings() was called.
Signed-off-by: Michael Andreen <harv@ruin.nu>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Main change is that now SubsurfaceAbout doesn't have instance object, but
it constructs and destructs dynamically.
* Remove the static SubsurfaceAbout::instance() class member
* construct/destruct about dialog on demand
* Other small aboutbox cleanups.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
ACK-ed-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Ancient code that was unused and only adding complexity to the
DiveCartesianAxis.
Also remove the spacing between the text and the lines of the Axis.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch re-enables a few items on the profile, most notably, the
profile itself.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Comment out most of the items on the profile since they are
currently completely broken ( positioning, etc ).
Also, remove the settingsChanged stuff from the DepthAxis because it
doesn't have the shrinked / expanded size on it ( it sits on the profile
code ) so I'll most probably move that to the profile settingsChanged in
the future - or if anyone knows of a better place to have this, I'm all
ears.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The setup of the item positions for the profile state should be done here.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Show a nice poster that Luisa did for Subsurface ( we have a few other
options that I'm waiting her to send. )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Change the 'namespace ItemPos' declared on the commit before this one to a
struct that will have all the 'on canvas' and 'off canvas' positions and
representations of all items, so we know where to change.
Also remove the remaining stuff from planer that was going to exist on
this profile.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This addItem was being called twice, and a warning that the item was
already in the scene was annoying me.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit breaks the whole new profile. <3
The problem with the old code is that I was using the QStateMachine
and I just got tired of it. I will implement a much-simpler state
machine to do what I want instead of hitting my head on the wall
to understand how that was supposed to work.
This commit also adds a few helper methods to simplify the understanding
of the constructor and tries to make the logic a bit better. No graphics
are being show right now. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch starts the cleanup that will take a few iterations to finish.
The current profile code uses QStateMachine, and it's much too verbose
for something we can do with less than a third of its lines of code.
I also added on the beginning of the redesign of the profile code for
planner, edit and a few other things that are going to be ported to
the new profile in the future, but not currently - I just lack the time
to make that work for the next release.
This commit basically:
- moves all 'new' calls to the initializer-list
- create a new 'setupItem' private method to concentrate the calls
that any item will do
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is needed because of a braindead issue on the Qt event
loop:
http://stackoverflow.com/questions/10059721/qt-qstatemachine-sync-problems-initial-state-not-set-on-started-signali
For the "event 1" to be received, the machine must already be
in a state that react to that signal. Even it was a queued
connection, the slot would be queued but only after the signal
was received, which it isn't since there is no connection
yet at that point.
To solve your problem, you can wait for the machine is in
"state A" before emitting the signal:
machine->start();
qApp->processEvents();
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will probably be added back in the future, but for now
they have no use and it was making me nauseaus.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Populate the status of the profile tool box as soon as the program
starts.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we have now a mix of old / new prefs, remember
to change both when we alter something.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I had a few very strange bugs regarding to preferences (like clicking on
apply twice so things worked), because the code that moved from
"QSettings" to 'Internal Settings Struct' was being triggered on the
mainwindow, *after* the settingsChanged signal was emmited. This should
fix the problem.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds an entry to the dive list context menu to load images. The user
can select image files and set a time offset to align camera and dive
computer clocks.
Using the exif time stamp the images are tried to match to the times of
the selected dives (with a grace period of an hour before and after the
dive). Upon success an event of type 123 is created per image with the
string value being the path to the image. Those images are displayed as
thumbnails in the profile. If the matching dive does not yet have a geo
location specified but the image provides one it is copied to the dive
(making the camera a poor man's companion app).
This patch includes easyexif https://code.google.com/p/easyexif/ which is
originally under a New BSD License to parse the image meta data.
This commit includes a new test dive dives/test31.xml with a matching
image wreck.jpg to try out the functionallity.
Obvious to do's:
Have images on the map
Have the images clickable
Have a proper picture viewer
Give visual reference for image time shifting.
Use the new profile
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For quick acess of preferences the show / hide stuff from the Settings
dialog is now in that toolbox and in the future we can put a few more,
like 'Show Notifications Panel' and 'Enable Legend'
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds an event filter to hide normal tooltips on the new
profile. All tooltips should be displayed in the Notification Area.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes use of a cache variable instead of creating / accessing a
new one via operator[], because for some reason QGraphicsPolygonItem
doesn't return a reference for polygon and a copy is always made.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With this patch the tooltip is ready to work on the new profile, we just
need to actually use it.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The functionality is not there yet - just the item hovering
the screen.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is needed so we can share the dive tooltip item with the
new and old profile at the same time. Next few commits will be
setting the functionality of the tooltip item on the new one.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Set showWithPPGraph so that animateChangeLine() is always called the
first time settingsChanged() is called.
Signed-off-by: Michael Andreen <harv@ruin.nu>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This works in a different way compared to the old widget.
To make it work we use vieport()'s height() and width()
and simplify the scroll position to:
scrollPosition = (mousePosition / totalLength) * scrollMaximum
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch uses the same code that lubomir used on the
old profile. It strangely didn't worked - most probably
because the scene has a fixed width() and height() of
100. the zoom works, and the movement works, but only
on the 100 first pixels of the profile.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch optimizes a few items when hitting the
'save preferences' dialog, since when a preference is
modified, all the items try to reload their visual
based on wether a preference changed or not, the correct
code for 'hey, my pref changed, let's update' needed
to be done.
now the axis will only set a new maximum if it's different
from the old one ( and thus, going to a new dive with
the same maxdepth or maxtime as the old one will not touch
their axis, not triggering gratuitous animations. )
also, the 'incr by 3m' was not being called - it seems
that our 'syncsettings' method is not storing things on
the 'prefs' global var. I added just for the incr by 3m
case, but it's something that we need to check later.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Created a method to check if calculations should take place
taking into consideration what changed on the model. if the
model changes *everything*, them, all calculations should
be done, but if just some of the columns of the model are
changed, only those columns should trigger an visual update
on the items.
In theory this patch looks right, but something is wrong (
calculations are not being made. ), so I'll commit this any
how, and fix on the next commit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The gradient factor is shown with this patch, but the correct position
should still be adjusted.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch only adds preference-awareness for the ceiling.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The last commit made the time and all other axis behave like the time
axis. Not cool.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit adds the same behavior for the old time markers on the new
ones.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Do not create a text label if the returned string is empty.
Also, fixed a potential crash after not creating a label and adding it to
the list of created labels.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes the color of the cylinder pressure use the sac colors.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit is rather big, and I forgot to cut it in pieces.
The first part creates a new 'calculate_gas_information' that will not
fill the profile_info->maxpp member ( that should be removed from it as
soon as the new dialog is finished ). The reason for that is that all of
the profile data will be calculated and the graph needs to update
dynamically, so whenever the settings changes, I ask for the model which
is the biggest graph and replot only the ones we need.
The second part adds a new animation function 'animdelete' to fade-out and
delete the item when it's done. the old function 'hide' did just that but
a hide shouldn't delete anything.
The third part is preferenes awareness for the PP graphs. I created two
new functions that receive the settings key for visibility and use the
QSettings to show / hide them. This also works quite well for the axis;
if no graph is visible, the axis will also hide itself.
The fourth part is colors. The pp graphs now have the correct colors.
And a bit of code cleanup too.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Strangely enough, on the system I build this, I don't see the crash. But
when I create a DMG and run it on a different Mac, it crashes if
updateTicks() is called but scene() still returns 0.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code sets up the C++ part for importing manually kept CSV log.
That includes setting up the field separator selection and calling
C-code for parsing the log file.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Important to note that no Partial Pressure Graph handles
settings yet.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Using the PartialPressureGasItem the addition of a new partial plot
is very easy.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes the beginning of the partial gas pressures, there's
two more. but this code uses a good part of the Model View system,
and it's way clearer than the old one. Luckly the other 2
missing items will be even more clear ( the diffs ) to do,
because I just need to create a new PartialPressureGasItem and
set the properties. <3
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch prevents memory leak by adding the text on the list of
'delete me when model changes' items. it also makes things a bit more
snappy because the scene doesn't have to deal with all of the
texts bounding rectangles eveytime.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
the profile item should also use the model to know when to
change something, this makes it happen.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch moves the temperature item as a cache that will
be updated as the model updates, instead of deleting / recreating
it everytime the dive changes.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The last patch correctly moved the GasPressure item to use
a cache-based system, but ignored the fact that the Gas
pressure text was not being removed from the scene. this fixed
it.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes the Gas Pressure Item a 'cached' item, when the dive
changes, the item will regenerate the drawing based on it's model.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes the Tissues be used as a 'cache', it will not
be deleted untill the program closes, but whenever a new dive is
selected, the old drawings of the tissues will be regenerated,
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a new class DiveCalculatedTissue that's preferences aware.
It knows when to show or hide itself.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way we will always have this object on screen, and as soon as the
model changes, it's contents will change.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The reported ceiling now behaves better by not being deleted / recreated,
instead it uses the same object and connects to the model to know when to
regenerate its plot.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes the cartesian axis of the profile depth shrink and
(together with it) the Profile Depth and the grid lines. There will
probabla bey a lot of things that didn't have their correct position
fixed, so I'll fix them in the later commits.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Almost all of the items on the new profile were being painted
on the same ZLevel, so the level of awesomeness was a bit random.
This puts things on the correct spots, events on top of everything,
profile at the bottom, things in the middle.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Dirk's implementation of the MeanDepth item was correct, but in order to
add the 2 strings to it ( one at the begin, one at the end ) I had to put
more stuff inside the ProfileWidget that's already packed with graphics
items.
So I created a new class MeanDepthItem that contains these 2 strings and
will get updated whenever the value changes.
I also fixed a math inconsistency where I changed RIGHT to LEFT.
(wich fixed a few text-placements, and broke others.)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When the preferences changed signal is fired, the items that can change
their visual based on the preferences now have to reimplement the
preferencesChanged method, so they know if they need to be replotted on
screen. I already implemented that for two of the items ( ProfileDepth and
Ceiling ) but others might need that too.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code actually uses the preferences for something. It will show and
hide the calculated ceiling in red if the prefrerences are changed for
that. One bad thing that I did in this commit ( so it was easy to try ) is
that a preference change will redraw the whole graph - not optimized. I'll
make this better in a later commit so that only the affected items will be
redrawn.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is an attempt to speed up painting a bit. Since we will draw the red
ceiling on top of the profile, I don't see a reason to dig a hole in it,
creating an more complex shape to be passed to the painter. Easier shapes
are easier to draw. ( I think )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds dive computer calculated ceiling on the profile graph as a
'hole' on it. There's an item that paints it in red - maybe we shouldn't
offer an option here and show that only in red?
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Test for max_temp == min_temp to prevent math overflow when calculating
temperature axis in new profile
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This item plots the DiveCalculatedCeiling over the profile. I still need
to add the Calc All Tissues version.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This just adds the texts for the gas profile. I've also added a method on
the dataModel() to return the diveId of the last used dive in a way that
the other methods can use it.
This code is almost 1-to-1 with the old one, a bit of thinkering can be
used to merge this loop with the upper one.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of asking the data as we do on the generic models, use the
internal knowledge of the class.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the dive computer text on the bottom left side of the new Profile.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Changes the ZValue of the event items so they are plotted
on top of the profile, instead of being hidden on some.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch just cleans a bit the Cartesian Axis, we never used
ticks on it, just the grid lines ( that I need to animate a bit. )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fixes temperature text replacing the old code
with the new DiveTextItem.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This uses a combination of items on the canvas which makes it easier to
position it where I want.
This also broke the other texts because I forgot about them. I will
fix that on the next commit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Removed the plotText function and replaced it with the
DiveTextItem class - this way there's just one way to add
text on screen, and it also makes it easy to fix positioning
of stuff there. Which is what I'll try to fix on the next commit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Split divemaster field value using comma and populate completion list.
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we use tags widget for several input fields (tags, buddy,
divemaster), it makes sense to keep focus policy setting in one place.
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This prevents tags widgets (dive tags and buddy) from grabbing
focus on mouse wheel events but allows entering dive edit mode
on mouse click.
It was attempted earlier by Dirk (commit d117beca), but edit mode
did not work properly.
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With massive hand-holding by Tomaz.
Writing for the new profile code is slightly different. You don't draw
anything, you just tell the widget where things are supposed to end up and
how they are supposed to look. Really nice.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The gasPressureItem needs to be initialized to null in the constructor.
Signed-off-by: Michael Andreen <harv@ruin.nu>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I Moved the 'plot text' method of the Old Graphics to the new
layout - this one was mostly unchanged as it was already good
as is.
And used the TemperatureProfileItem to also display texts.
This was the first implementation of the new system that uses
*less* code than the original one, wich makes me happy.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the Gas Pressure Graph with the related Model Changes
to access the cylinder index, pressure, interpolated pressure
and SAC.
The plot does not correctly plot its color right now but it's not hard to
do.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This version of the create plot info is the same as before, with the
difference that it doesn't depends on the gc.
Also fixed a crash.
The Pressure Index, Information and interpolated seems wrong,
I'm getting only zeroes.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added missing information about the pressure to the model; this shows that
I didn't do something right, as the model has 0 pressure information. Need
to fix that on the next commit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The cylinder pressure axis is the 'Y' axis for the Cylinder plot.
I positioned it in around 20% to 60% of the screen state.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since I didn't add a pixmap to be the background of the new profile, yet,
things got wrong on mac and crashed. This should fix it.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes a warning about the QGraphicsItems not being on the
QGraphicsScene, and thus, cannot be removed from it.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old graph didn't display the time axis, so this will
also not display it. By not calling updateTicks the labels
and ticks of the Axis are not created.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now we can create an axis that's topToBottom, BottomToTop, LeftToRight and
RightToLeft.
This was needed for the Temperature Plot, because it should be inverted
(starting on the bottom).
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the Temperature Graph with its related classes. A Temperature Axis
is also created so the item is plotted on the right place.
Currently the Temperature Axis is just like the depth axis - top is
zero, wich means that the graph is inverted.
Also, the Temperature axis is being displayed as this helps debugging.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The DiveProfileItem contained much of the complexity and
algorithms for almost all line-based items on the canvas,
so I transformed that to a general abstraction and implemented
a new DiveProfileItem that uses it. this should reduce a
bit of code since the implementation of the PP Graphs, Temperature
Cylinder Pressure and maybe a few others will only need to
reimplement the paint() and the modelDataChanged() methods.
The rest is ready.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Simply pass a event to the item and it will know what
to do. The sad part is that this isn't true yet - there's
quite a bit of boilerplate that a lot of the items are needing,
but the good part is that the boolerplate is the same in
all of the items, which means that I can create a tiny bit
of abstraction to encapsulate it and the code will be
way smaller to setup the items on the canvas.
Right now the items are being correctly placed on the
right places. It doesn't supports hidding / showing yet.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code for this item is a bit too big to be just the grid
of the dives and I know that, don't bully me. :)
The main idea of this grid is that it knows when it should be
updated. this is a bit different than the old code where all
the painting happened on the same method. This is bad because
it's more code, but it's better because if I break the grid,
only the grid will be broken, and it's easyer to spot the breakage.
in the old code if I did the wrong thing with the graphics context,
the whole graph gots messed out.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There was a bug in the old implementation where we needed to
trigger a repaint of the profile almost everywhere. this isn't
needed anymore on the new one, so do not use the same method
that will be killed when I finish this.e
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This method gathers information about the max and minimum sizes of
the cartesian axis that we should plot. It's still a bit cumberstone
for my taste, but this shouldn't be a problem. I think we need to
rework the 'Zoomed' version of it, since zoom or without zoom,
we should be good to go using the QGraphicsView.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As Sensus import needs a specific XSLT and user specified parameters are
not used nor needed, tune the GUI accordingly (disable options and add
Sensus in the list of known imports).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is just to make it more obvious when new issues get introduced. The
build should always be free of warnings...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Another futile attempt to cleanup the code and make coding style and
whitespace consistent. I tried to add a file that describes the key points
of our coding style. I have no illusions that this will help the least
bit...
This commit should ONLY change whitespace
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Tomaz code had us start on the depth model tab (when built in debug mode).
It seems to make much more sense to still show the fully featured profile
by default.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Created a new version of calculate_max_limits that doesn't have a
graphics_context and returns a plot_info. The code is basically the same
as the old calculate_max_limits, so there's not much to talk about.
The rest of the code is just boilerplate to plug the Profile
code with the axis and model stuff, to be plotted on screen.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit adds a QTableView if built in debug mode. This is very userful
to understand the Profile that will be drawn by the graphics classes and
fix the possible errors.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The state machine needs to be started before it works; now the animations
are working. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There's a Qt visual debug / helper tool made by KDAB named GammaRay that
uses QObject instrospection to understand what's happening on a QProject.
This tool uses the Object Name to display the items on a list, so I've
added the QState's names to their objects, which greatly helps debugging
with Gamma Ray the states of the StateMachine.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The context menu added here should only be temporary, it's an easy and
simple way to test the transitions of the items on screen.
They seem a bit broken atm, I'll try to fix that. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code creates the animations that will be triggered when an state
changes. Things like hiding items and such should be handled this way.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Just removed some code that I tougth to use, but it looks
like it's just a waste of lines.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It seems that I forgot to add the background pixmap, but this is being
done right now by luisa. This patch fixes the size of the scene by
scaling everything to the size of the viewport as soon as a resize is
done, and it also fixes the size of the - to be included - background
pixmap.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code adds all state transitions for the items on screen; they do not
animate yet, but already move to the correct location (the location seems
wrong on the screen, because I'v not correctly zoomed out the canvas yet).
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Those constants will be used later on to setup all transitions of
the Graphics Items on the canvas. They are the correct positions
of each item inside and outside of the scene, in a way that the
state machine can animate them smootly.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a start of the work on the States for the Profile. All setup is
done, all connections are done. Maybe there's something missing because I
never worked with QStateMachine before, but it seems to work correctly.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The background should be a Pixmap and thus it cannot zoom in or
out; this keeps it the same size always, the full height of the
scene.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Setup the default item sizes and locations inside of the QGraphicsScene.
Also added every item to the scene so that it's correctly displayed on
screen.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Beginning of the code for the constructor, just constructing
some of the items and preparing for the State Machine to come.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Created a Time Axis based on the CartesianAxis that knows
how to plot the minutes. This is needed because the CartesianAxis
donesn't knows about minutes at all, and would plot the
seconds instead.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The CartesianAxis used a simple method to put things on screen
which is wrong for almost any case besides the 'current value here'
since we store things in milimeters on the axis, we need to convert those
to meters before showing on the profile.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This call just passes the selected dive to the new profile widget. No
drawing is performed, I still have to setup the constructors and the rest
of the initialization of the new Profile.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I've used the paint() method on it ( even if it's not necessary
on a QGraphicsView ) to reduce absurdely the number of items that are
inserted on the QGraphicsScene ( each small line of the profile should
be an item if it was not for this, it's like that on the old profile. )
and thus reducing the memory consumption, speed and so on.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This model encapsulates the plot_info struct and provides
a consistent way to show it using the Qt Model view system
in the C++ and QML way. For a QGraphicsItem that should show
a Profile, this is the start.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
