If there is a local cache, we at least once successfully accessed the cloud, so
this is a valid cloud based git tree.
Without this change we run into a subtle bug: after a fresh install, or when
switching users, when the cloud data is accessed the very first time, we don't
remember that this was indeed loaded from the cloud. So if we then download
from a dive computer or make any other changes to the dive log, we cannot save
those dives to cloud storage - but we fail silently doing so. Which to the user
would look that inexplicable data loss.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When displaying segment or stop times in the planner notes, we always
round to the next full minute. This can mean for example that we
round down more often than rounding up with the result that the sum
of the segment times does not match the total runtime and can for example
lead to stops that are shown with 0min duration.
With this patch, we increase the reference time of the last display only
by the duration time actually shown. This way, the rounding errors don't
accumulate but having rounded down previously makes rounding up the next
time more propable.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
When computing the best mix for a target depth, for helium, one
can either require that the partial pressure of N2 is the same
as at the target depth or the partial pressure of N2 plus O2.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
When clicking "done" on the dive site edit screen, the diveSite
member variable was reset to nullptr in acceptChanges() at the
beginning of the function. This prevented posting an undo-command
as a consequence of the active widget losing focus.
Reset the diveSite variable after exiting dive-site mode, which
causes the active widget to lose focus.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of copying the displayed dive, generate an undo command.
This makes the replanning an undoable action and fixes a bug
where the dive details have not been updated correctly.
Fixes#2280
Reported-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In dive site mode, export selected dive sites, not dive sites
of selected dives.
Fixes#2275.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The application could be crashed by
1) Create dive site
2) Edit dive site
3) Undo until dive site is removed
4) Continue editing now non-existing dive site
Therefore, hook into the dive-site-deleted signal and if the
currently edited dive site is deleted, close the widget.
When closing the widget, make sure that the potentially
dangling pointer is reset to zero so that there is no
other potential use-after-free bug.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To recognize HTML-notes the text was scanned for <div> tags. But
apparently the planner notes do not feature such a thing. Therefore
extend recognition of HTML to <table> tags.
Note we can't use the <html> or <span> tags, because these are
*always* produced by the QTextEdit::toHtml() function.
Fixes#2265
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The create_plot_info_new() function releases old plot data. This
can only work if the plot_info structure was initialized previously.
The ProfileWidget2 did that by a memset, but other parts of the code
did not.
Therefore, introduce a init_plot_info() function and call that when
generating a plot_info struct. Constructors would make this so much
easier - but since this is called from C, we can't use them.
Fixes#2251
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On the main tab, the trip time was not shown when switching to
a trip. Implement showing of the trip date in a function, as the
undo-code will also have to update the trip date in certain
circumstances.
Fixes#2207
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This button only closes the filter panel but doesn't clear it.
Reported-by: Adric Norris <landstander668@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit 0c38754916 introduced a
bug in MapLocationModel::reload() by setting an entry in the
name-to-location map before the location was initialized.
Move the setting of the map entry back where it was before:
after the assignment of the location variable.
Moreover, define the location variable directly on allocation
of the location to avoid thus bugs in the future.
Why did we not get a "might be used unitialized" warning
anyway?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The plotDive() function had a flag to plot pictures asynchronously.
This was used on export. Rename this field to "instant" and disable
animations when set. This should make sure that the axes are properly
exported.
Fixes#2170
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This optionally allows accessing data in /media/ folders, if the user
issues:
snap connect subsurface:removable-media
https://docs.snapcraft.io/removable-media-interface
Signed-off-by: Michał Sawicz <michal@sawicz.net>
A user reports a problem when dives have the same time but different
numbers. The dives appear sorted randomly (effectively they are sorted
by an internal unique-id).
Try to sort by number for dives at the same date in this case.
Fixes#2086
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Adds "Import->Import dive sites" menu to mainwindow.cpp and adds the
on_actionImportDiveSites_triggered() method to prompt for the filename
to import from. The files are parsed and then any dive and trip data is
cleared before opening a dialog box to select which sites are to be
imported.
Signed-off-by: Doug Junkins <junkins@foghead.com>
Fixed bug in the Haversine function in get_distance() based on algorithm
at https://www.movable-type.co.uk/scripts/latlong.html and added bounds
to the 'a' term to avoid floating point errors for antipodal points.
Signed-off-by: Doug Junkins <junkins@foghead.com>
This commit adds an entry to the dive media context
menu which offers to write a subtitle file. This
creates an .ass file for the selected videos.
In an attempt to to clutter the screen too much, don't
show irrelevant entries (zero temperature or
NDL and show TTS only for dives with stops).
VLC is able to show these subtitles directly, they
can be integrated into the video file with ffmpeg.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Selecting "Selected dives" exports the dive sites for the selected
dives. Selecting "All dives" exports all dive sites.
XML format is the subsection of the divelog XML that describes the
sites headed with a <divesites> section like:
<divesites program='subsurface' version='3'>
</divesites>
Signed-off-by: Doug Junkins <junkins@foghead.com>
This introduces a csv file that contains the data from
the structs defined in profile.c, in particular all
deco information computed for the dive profle (including
NDL, TTS, ceilings, surface GFs etc).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
We already do that on mobile and I was certain we used to do this for
desktop as well, but apparently that got lost somewhere...
This should solve the problems we are seeing for people with mixed case
email addresses.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These features where already included there (but that happened on a branch, so
they are still listed in the CHANGELOG on master).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With Facebook support gone, we should offer a way to export
the profile image. This has been part of the TeX support
but this makes it explicit.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The most recent firmware of Shearwater computers shows this.
This is a measure of absolute amout of tissue loadings in an
easy to digest unit. Therefore it is useful to have.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This adds a checkbox for rebreather modes of the planner
that force the ascent to be in OC mode. Before, one had
to add a one minute last segment with the mode change but
this is not practical when manually searching for the
maximal bottom time given gas reserves.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
... otherwise this change is not saved when saving to git.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Implement the protocol in Erik Baker's document
"Oxygen Toxicity Calculations". This code uses a
third-order polynomial approximation of Baker's
equation 2. Provision is made for
PSCR and CCR dive logs and dive plans. In the
case of dive logs, the values of o2 sensors are
used if there are data from such sensors. For CCR
only the data from the first O2 sensor is used even if
there are more than one sensor. This is a potential
weakness, but this function is probably NOT the
place to calculate mean o2 values accross all sensors
and to emulate voting logic to reject info from
aberrant sensors.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Adapt get_trip_date_string() to use the same logic as get_dive_date_string():
Use the static "loc" object to translate date. Before, the trip
date was shown in C locale.
Reported-by: Philippe Massart <philippe@philmassart.net>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This fixes a subtle bug introduced in 5c4569247a which
unified two functions finding the gasmix at a given time
during the dive. There was a slight difference, though:
Does a gaschange exactly at that time count or not? For
the planner to work, the answer has to be in the affirmative.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
When tabbing through the dive-info screen, a dive-master and a
dive-buddy would be added. The reason is that pressing tab would
be interpreted as a text-input. Disable this behavior by calling
setTabChangesFocus(true) in the TagWidget constructor.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
After the previous commits, we now have a preference that nicely
preserves the state of the UI, and we have the well known git_local_only
global, that is used to denote whether we want to use to local repo
only, or we want to interact with the online cloud as well.
This commit gets rid of the now superfluous syncToCloud logic. Instead
we simply set the git_local_only directly.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Nowadays, we edit dives just by starting to enter data for the dive.
There is no need to explicitly ask to start editing the dive, using the
now removed menu option. This was a left-over of a long past history.
This is fallout from PR #1673.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Add a checkbox that triggers replacement of all English characters by
x's in notes, buddy, dive guide and (while we are at it) suit.
This is ment for people sharing logs for debugging that are concious
about privacy issues. It leaves the lenth of strings in tact as well
as special charcters as those might be needed to track down a particular
parsing problem.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Add line about show_developer being saved to disk in the mobile UI
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This also switches us to libzip's new official home on GitHub, and takes into
account that libzip no longer supports autotools and instead now is cmake
based.
Building against that, on my Mac build system, Subsurface once again correctly
opens DLD files downloaded from divelogs.de.
Fixes#1534
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The # and <> characters introduced formatting issues,
for those who wanted to view our changelog in the Github
repository.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Identify segements that fullfill the folllowing criteria for
the leading compartment:
He is off-gasing while N2 is on-gasing
Overall there is on-gasing
Add a line to the info box for those segments
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Add DiveItem::displayTags helper method to return Tags as a QString
New Tags column is
by default inserted before "Photos" column
by default disabled
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
Add a combo box for water types with defaults for fresh water, sea water
and the EN 13319. All values taken from units.h, where EN 13319 was added
beforehand.
Custom values can be entered through a spinbox.
Also changed "Salinity" in TapDiveInformation.ui to "Water type".
Translation required!
Signed-off-by: Oliver Schwaneberg <oliver.schwaneberg@gmail.com>
When adding a dive manually, you might clear the "duration" field and fill
in your value by hand. Unfortunately, commit #1052 produced a bug that
practically limited the dive duration to 6 minutes once the field was cleared.
Signed-off-by: Oliver Schwaneberg <oliver.schwaneberg@gmail.com>
as otherwise there are warning on the descent.
The ICD line in the info box is generated for all
gas switches with decreasing He content.
Also change the presentation in the info box to align it
with the notes.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This fixes a bug reported by Willem that removing waypoints
using the right click context menu makes the cylinder
pressure lines partly disappear.
The reason was that clicking a dive handler disables the
pressure interpolation (and other things, controlled by
shouldCalculateMaxdepth). This is turned on again upon
the mouse release event. This event is not triggered when
selecting in item from the context menu (like remove
waypoint or gas selection) so we need to send it manually.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Before, we did not look at the path of the filename to export
to but we should write the images there and not in pwd.
Fixes#931
Signed-off-by: Robert C. Helling <helling@atdotde.de>
- Minor formatting changes
- Added a couple of missing notes
- Make the ReleaseNotes.txt format to indicate the latest
version on top
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Otherwise the divecomputer has to be in pairing mode
at app start time.
Unfortunately, this leaves less space for the progress message.
My time/qml knowledge does not suffice to move that to the next line
(when moving that out of the RowLayout it overlaps with
the buttons).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Add a file CHANGELOG.md in the root Subsurface directory
and track this file with the `-text merge=union` attribute.
This prevents merge conflicts if release notes are added
on top of the file by different commits.
Also, make ReleaseNotes/ReleaseNotes.txt point to that file.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
