This bug manifested itself as too long deco obligation when moving
waypoints to later and then back to earlier times as all intermedite
versions were created as dives in the divelist (and the saturation of
these "previous dives" was taken into account.
It is not entirely clear to me how the dive will be permanently added to
the divelist once ok is pressed: One could in createDecoStops allocate
struct dive from the heap rather than from the stack and return a pointer
to it and which is then added to the dive list upon pressing ok.
[Dirk Hohndel: add include file to make this compile]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Imported the subsurface project into Eclipse to try and pull apart
how it all works together. Added an include for profile.h and some
brackets around a condition, but didn't make any functional changes
(I hope). These 2 changes should be purely cosmetic.
Signed-off-by: Benjamin Fogel <benjaminfogel@yahoo.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The current QTextDocument implementation is slow due to
HTML parsing. By using QTableView with QAbstractTableModel
we boost the performance of the table print drastically.
This patch completely replaces the old solution.
There is a hidden QTableView widget which is populated
with all data and rendered using a QPainter attached to
the printer device.
A couple of new classes are added in models.h/cpp
that handle the table print model and these are then used
in printlayout.h/cpp.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QObject::tr() has source string as first argument and disambiguation as
second argument. Currently the events shows "Starts with space!" instead
of " begin" or " end" after the event name.
Signed-off-by: Michael Andreen <harv@ruin.nu>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the tooltip text was used as key in the map, two events of the
same type, close to eachother, would cause one of them to not be
removed.
Since ToolTip::removeToolTip() isn't used, we don't need a QMap and can
use a QList instead, so all tooltips are properly cleared.
Signed-off-by: Michael Andreen <harv@ruin.nu>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
DiveComputerList::getExact() created a temporary QList with the
DiveComputerNodes matching a specific model. A pointer to a node in the
list was returned, which becomes invalid when the list goes out of scope
and gets destroyed. Causing a crash when the model strings are compared
later.
Instead of using contains() and creating a temporary list, we can just
use an iterator, which should be both faster and safer.
The crash is easy to trigger with DM4 imports, but can probably be
triggered in other cases too.
Similar problem with DiveComputerList::get().
Signed-off-by: Michael Andreen <harv@ruin.nu>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the possibility to choose gases in the planner,
now the user should click on the name of the gas, a
popup window will appear, asking the user to choose
what gas he wants for that ascent / descent.
now we need to hook that up with the createDecoStops
method that calculates the decompression.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added the current gas used on the planner, now it's a matter
of choosing the new gas, that will be done in the next commit.e
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added a button and a method to reduce time on the dive
planner. The dive planner will not reduce below deco-time
and it will also not reduce below TIME_INITIAL_MAX.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added the code to reduce depth on the planner. Depth
cannot be lower than 40m and it also won't let the
user reduce if there's any point on the 'reduced' area.
the icon is ugly - we need an artist.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The Working Press didn't correctly updated when there was a 'bar'
or 'psi' in the string ( and that was defalt behaviour );
The o2 didn't correctly updated when there was a '%' on the string
(and that was default behaviour ),
The He didn't correctly updated when there was a '%' on the string,
and that was also default behavior.
Now all of them correctly updates.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This is a follow up commit to the previous one that
enabled cancel for cylinders, everything in the commit
log for the cylinders also applyes here.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Made the default 'Cancel' action correctly cancel
the cylinder edition. This is needed only because
we bypassed the default behavior on Qt that took
care of this, because we wanted to have more control
on how the view would update the items accordingly
with wich one of the cylinders were selected
on the edition pane - the pressure and size of the
cylinders needed to have it's data set, but the Qt
Model/View system *thinks* that cancel-edition is
simply 'do not commit the edition data, then.' wich
would not work with us, because we passed the strange
data already. So, I created a backup data that serves
us very well. When the user cancels, this backup data
is added back on the cylinder, making everything as
it was before.
[Dirk Hohndel: removed the inadvertendly added boost header]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This causes the Marble widget to use proxies automatically too.
On Mac, this gets the global proxy settings; on Windows, it gets the
IE settings; on Unix, it uses environment variables (set http_proxy
and all_proxy).
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds the getColor() helper function to
ProfileGraphicsView and EventItem so that retrieving
a certain color can depend on a 'isGrayscale' flag.
This flag is private and only set by
ProfileGraphicsView::setPrintMode() at this point.
EventItem also now accepts 'grayscale' as a constructor
argument.
A couple of side modifications are:
- move setBackgroundBrush() to ProfileGraphicsView::plot()
- set the same pen color as brush color for the dot in the
'!' symbol inside EventItem::EventItem().
TODO: look for color issues when printing using the
custom grayscale table
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
We pass the value of 'color_selected' stored in the
print options to ProfileGraphicsView::setPrintMode().
This way the profile can be printed in grayscale
internally instead of converting a QPixmap to
grayscale.
There are a couple of questions here:
1) Are all the 'if/then' checks for all individual
colors faster than the direct QPixmap/QImage grayscale
coversation.
2) The direct grayscale conversation does not give
control of individual colors, but can it look actually
better?
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
(experimental)
Add the method PrintLayout::convertPixmapToGrayscale()
to convert a rendered profile pixmap to grayscale.
It will probably be faster to have
ProfileGraphicsView render in grayscale under certain
conditions (and use a specific color table) instead -
e.g.:
ProfileGraphicsView::setPrintMode(bool printMode,
bool useGrayScale);
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
PrintLayout::printSixDives() goes trough all dives
and prints their profiles on full portrait pages.
This method is based on resizing the ProfileGraphicsView
widget, plotting each dive and then 'grabbing' it using
QPixmap::grabWidget().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
When printing the profile there are certain features which
we want different (or disabled). This includes font scale ignoring
and showing a toolip. To achieve that we check for a printMode flag
in ProfileGraphicsView which can be set using setPrintMode(bool).
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
There is a potential issue when placing a heading on a new
page. If the height of a data row is larger of that of
a heading, a new heading can end up at the bottom of a page
leaving that page with two headings.
To solve that we add line breaks (<br>) until the new
page is reached and add the heading there. Algorithm
assumes that the height of a heading is larger than
a line break. Also it is now obviously even slower.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
QTextDocument uses a separate painting device,
thus we need to pass our QPrinter instance which may
have a resolution different from the screen resolution.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The Working Press didn't correctly updated when there was a 'bar'
or 'psi' in the string ( and that was defalt behaviour );
The o2 didn't correctly updated when there was a '%' on the string
(and that was default behaviour ),
The He didn't correctly updated when there was a '%' on the string,
and that was also default behavior.
Now all of them correctly updates.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This is a follow up commit to the previous one that
enabled cancel for cylinders, everything in the commit
log for the cylinders also applyes here.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Made the default 'Cancel' action correctly cancel
the cylinder edition. This is needed only because
we bypassed the default behavior on Qt that took
care of this, because we wanted to have more control
on how the view would update the items accordingly
with wich one of the cylinders were selected
on the edition pane - the pressure and size of the
cylinders needed to have it's data set, but the Qt
Model/View system *thinks* that cancel-edition is
simply 'do not commit the edition data, then.' wich
would not work with us, because we passed the strange
data already. So, I created a backup data that serves
us very well. When the user cancels, this backup data
is added back on the cylinder, making everything as
it was before.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Don't set the cylinders and weight types if they are
the same than before, this fixes a bad thing that happened
when playing with the values. it could blank out the values
carefully chosen by you.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This is a linus request, adds a Single-click edition
on the tableview to make it more consistent with the
rest of the interface where edition is permitted.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
So, I used the Qt Event Filter strategy to bypass the normal role
of user interaction, the Qt ComboBox needed 2 keypresses to close
and edit. so I grabbed the first one and send together a second one.
Há.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch fixes the combobox behavior on the inline edit
to what it was ( well, similar to ) the GTK version,
up and arrow keys will walk you to the list of choices,
and it will update the other data as soon as you walks over it
one drawback is that you cant ( for now, since I do have a
very big headache at the moment ) cancel, since the cancel
will just forgets the item and do not call 'setData' on the
model, but we already called it while walking on the list.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Adds spport for key_up and key_down in the combobox
delegates, now when you press key_up or down, it will
show the list of choices instead of going one-by-one
in the lineedit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This modifications makes the About dialog spacing more
consitent with different font sizes. Tested on
Ubuntu 12.04 with the 'Universal Access->Text size'
settings.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It might be a good practice to declare certain class
'helper' functions as constant members. But I don't
think there are performance benefits to that other
than the readability ones.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
We use the DiveItem struct from models.h so to ease the
display of date, depth and duration. All columns present
in the GTK build are now displayed.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Add this helper so that we can easily wrap the required
memory release after calling get_dive_date_string()
(fixes a small memory leak).
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Patch does:
- set individual column width and name
(held in tableColumnNames, tableColumnWidths)
- reduce font size in the table
- more small tweaks in the style sheet
TODO: finish printing all dive data
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
We don't really need includes of display.h and dive.h in
printoptions.h and printlayout.h or forward declartions
of 'struct dive' and 'struct options' in there.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
also includes:
- experiment with colored background for headings
- experiment with 'left' alignment for headings
('th' tag CSS does not support 'text-align')
- whitespace fixes
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Currently only for the table print, but now we use the
actual dive table to iterate trough all dives (find only
selected if needed) and print their 'number' element
in table rows.
Also improves the new-page detection algorithm slightly.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
PrintLayout for now only handles the table print,
while the data output itself is work in progress.
For now there is a simple HTML/CSS table logic based
on QTextDocument. There is an iterative algorithm
which listens for a page increase and adds a heading
on top of the new page.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Use a QPrintPreviewDialog, while the print logic is WIP.
This way Qt will show the print output in a window instead
of exporting to a file and opending it manualy.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The setup() method will be called each time to obtain the
current printer settings. Also it calculates required scalling
based on screen agains printer DPI.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
