I guess the Dive list item will be accessed more often
than the preferences item, so put it to to. Also remove
the "back to" prefix.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a multi-part message in MIME format.
After fixing the regression (commit 9e9d220c98) strange double dashes
appeared in the Divelist headers for trips. Just suppress it.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If one browses the application more than one step (e.g. details, gps fix
list and preferences), we need to pop the stack a bit more to get back
to the dive list. This will clear the whole stackView as I saw no harm
in discarding the history when one jumps back to the dive list.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Pressing of buttons were difficult to see mainly due to small buttons
and small color distance between pressed and un-pressed state. This fix
enlarges the buttons a little, and choses a different color for
the pressed state.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As asked for on the mailinglisrt, a menu item is added to return
to the Divelist the easy way. In addition to the standard Android
back button.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit 6540e95425 ("dive details navigation") the change to access the gps
variable was only partially implemented.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With this edit seems to work again. The edit page can be scrolled around on
smaller screens to allow editing every part of it and to allow the user to
press the "save" button.
This is mainly intended to make sure testing can continue - it's unclear if
this will be the final design.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We keep losing the time when people move code around. date really is just the
date and doesn't include the time component.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We were comparing apples to oranges on a few items and therefore more or less
always assumed that a dive had been modified.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If unit_system is set to imperial, we need to set the units explicitly
on mobile application.
Fixes#993
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's not recommended to set the height explicitly of an item in a layout. Use
Layout.preferredHeight instead
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit f3f7930 introduced a more attractive button style to the start page.
This patch turns it into its own type so it can easily be used everywhere.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It is not recommended to set the width explicitly of items in a layout. This
caused some issues in DiveDetailsView, which were fixed by commit 1030cb2.
See http://doc.qt.io/qt-5/qml-qtquick-layouts-layout.html#details
Set 'Layout.preferredWidth' instead of 'width' for GpsList and Preferences
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I want a prettier visual for those, anyway, but artificially making them
shorter than that text they display seems silly - and causes the text to be
trunkated for no good reason on some devices.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is based on post by Ben Laud
https://medium.com/@benlaud/complete-guide-to-make-a-splash-screen-for-your-qml-android-application-567ca3bc70af
It creates a theme that uses a splash drawable that Android will show
immediately when the application is launched. And then starts the QML
application with visibility set to false adn only makes it visible (and replace
the splash screen) once initialization is finished.
We still get a little flicker with the switch from splash to start page to dive
list, but over all the experience is hugely improved. And the bug that the
splash screen stays around when starting Subsurface-mobile in landscape also
appears to be fixed.
Fixes#994
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In dive details view, shifting the dive number to the right of the top row
means it won't be cut short if the dive duration is 1 hr or longer
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This one appears to work in my testing so far. And reading the code it
seems to make sense. We look at the size that the widget thinks it is. And
we scale the scene to fill that size (including a margin). And then let Qt
and QML deal with the rest of it. Assuming this works it shows that we
have been trying too hard all this time.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Different approach here:
- profile gets a bit higher, this was requested on the mailinglist, and
seems to behave much better with the painted profile, we'd otherwise
get it magically clipped on the right hand side.
- Make the scaling dpi aware, this fixes scaling for me on the Nexus7, I
haven't been able to test it properly on other devices, so this needs
some more testing. The result is visually quite close to what we can
do, although I'm still getting a somewhat larger margin on the right.
To get at the devicePixelRatio without too much custom code, I've
added a property to the QMLProfile to retrieve it from the theme engine.
Signed-off-by: Sebastian Kügler <sebas@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- Apparently, QMLProfile doesn't like being painted without being
visible, when flicking quickly through the dives I would get empty
rendered profiles. Setting the cachebuffer to zero fixes it, and saves
some memory.
It still has some unfortunate timing, the profile gets rendered
mid-flick, which leads to a delay in the flicking motion, quite
annoying. We will have to somehow make sure that new profiles are
rendered after flicking, not during
- Smallish cleanups
Signed-off-by: Sebastian Kügler <sebas@kde.org>
- stop at bounds, this is in line with other flickables. I really
don't like Flickables floppy default behavior to allow dragging and
scrolling over the bounds.
Signed-off-by: Sebastian Kügler <sebas@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- As the list may get reset on save, the dive_id effectively changes
since currentItem isn't updated. So after editing, we end up with a
different currentItem than visible. This is very unintuitive, but
has to do with the model resetting. It would result in the edit view not
showing the current dive when opened the second time. Let's make sure
that out currentItem is always the visible one before we're filling
the data into the edit page.
- Close the drawer when we're navigating away from the dive item, for
example when hitting the back button.
Signed-off-by: Sebastian Kügler <sebas@kde.org>
This patch reworks the navigation of the dive details.
- The detailsview is now a list view with page-sized delegates. This
allows horizontal swiping to the next and previous dive.
- The central button now allows to open the edit mode for the dive.
Original patch was done by Marco Martin, but needed to be reapplied by
hand.
Signed-off-by: Sebastian Kügler <sebas@kde.org>
In commit 25aa80846b ("Move Dive class from qthelper.h/cpp to it's own file")
the meaning of getting the "date" of a dive was changed to just be the date and
not the date and time. That's not what the QML code expected.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While it makes sense to have the concept of "what's in memory" and "what's on
disk" in a desktop application, on a mobile device that seems like the wrong
approach. If the user edits a dive and taps on "save", they reasonably expect
this to be saved to storage (so our local cache of the remote git repository).
And "Upload to cloud" then pushes the data to the cloud server. It may even be
reasonable to do that automagically, but that I'm not so sure about.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Otherwise, if the device is offline we would not be able to store changes in
the local cache, completely defeating the purpose.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Small error was introduced in commit 25aa80846b. The dive.location was
shown in the DiveList instead of the intended dive.number
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This only deletes the fix on the mobile device, not on the server.
And it is really really slow. Re-reading the data from the settings just isn't
a smart way to do this.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Just having the string means we lost the unique value that we can use as key to
indentify a specific GPS fix.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is just the UI, the actual deletion is not yet implemented.
I really like this interaction with the list items. Slide them to the left and
you see icons for actions. Right now we have just one and that may seem like
overkill (hey, we could just have the delete icon instead of the application
menu icon, right?) but once we allow the ability to show the GPS location on a
map we'll have two operations and this will make more sense.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
and rename it to DiveObjectHelper, since it should be an QObject
based class to make it easier on the QML, grantlee and widgets
side to display the dive's internal data.
each Q_PROPERTY defined in the DiveObjectHelper.h file
can be acessed directly via it's name.
So, if you are on a model that returns a dive, acess it's name
by dive.name
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
with the adittion of gpslistmodel/location, the libraries
qt-models had a direct dependency on subsurface-core, and
subsurface-core had a direct dependency on qt-models, this is
bad.
Moving a bit of code around I'v managed to clean this out, and
also to clear a bit of uneeded code (GpsTracker and gpsTracker where
basically the same thing.)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When starting ssrf-mobile, and the local divelist is identical to the
cloud version (so same sha1), a save of local modifications to the
cloud should be possible. This fix enables this by pretending
that a suppressed load from cloud on start is still a valid load
from cloud.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This had been broken by mistake in commit e5f95daee8 ("QML UI: reimplement
context menu for dive details").
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far the user can't interact with these. We should implement an ability to
visualize the GPS fix and to delete it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
