We needed to prevent updates when we messed with the
diveplannerpointsmodel as those would trigger
starting planning from scratch causing infinite loops.
Now, the variations calculation operates on a copy of
the diveplan, so the model is no longer involved and
we should not block recalculations (as those might be
triggered by the UI).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This reenables the computation of plan variations but now in a separate
thread. Once finieshed, a signal is sent to update the notes.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Icon aliases were complete mess.
Some icons had alias some didn't.
Named with underscores vs. hyphens vs. camelCase.
Lower vs. upper case.
"ICON" prefix vs. suffix vs. nothing.
With vs. without filename suffix.
Some didn't make sence. Eg. mapwidget-marker-gray
(I can see, it's grey, but what does it represent?)
Some were duplicated, eg warning vs. warning-icon.
Some were name after widget, which is wrong.
Do not reinvent wheel. Use widely used naming scheme
close to Freedesktop Icon Naming Specification. This
will enable usage of common icons from current set in
the future. Thus Subsurface will fit nicely to GUI.
This changes icon aliases to one, easy grep-able style.
Signed-off-by: Martin Měřinský <mermar@centrum.cz>
Icon aliases were inconsistent mess. Underscores vs. hyphens vs. camelCase.
With vs. without filename suffix. Lower vs. upper case. "icon" suffix vs.
prefix vs. nothing. Some were duplicated, eg warning vs. warning-icon. Some
icons didn't have alias at all.
This changes all icon aliases to one, easy grep-able style which complies
to Freedesktop Icon Naming Specification (Guidelines).
Signed-off-by: Martin Měřinský <mermar@centrum.cz>
If the user implicitly adds a dive site by editing a dive, and
a location filter is active, check the new dive site in the
location filter.
This is done by informing the LocationFilterModel of the new
dive site name prior to repopulation. The LocationFilterModel
then adds a corresponding entry and marks it as checked.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since commit 01d961086c, the location filter
list is updated if a dive site is edited. The problem is that if the
name of a selected dive site is changed, the selection is lost.
Therefore, before repopulating, inform the location filter that a dive
site changed its name. The location filter then internally changes the
name and can properly transfer the old selection on repopulate. This is
performed via the new LocationInformationWidget::nameChanged signal,
which is connected to the new LocationFilterModel::changeName slot.
A special case to be handled is the following:
[ ] Site 1
[x] Site 2
and "Site 2" being renamed to "Site 1", i.e. both sites being merged.
Here, the merging is detected and "Site 1" will likewise be checked:
[x] Site 1
[x] Site 1
No merging is performed, as the list will be repopulated anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The function dive_site_less_than() in qt-models/divelocationmodel.cpp
does not what it promises: it uses less-or-equal instead of less-than
comparison.
Note that, even though this may sound pedantic, this is an actual bug.
Usually, sorting functions suppose that they are provided with
strict weak ordering, which <= does *not* provide.
This is the actual reason for the crash mentioned in commit
f8a3a85210.
While touching this function, make it of static linkage, since
its usage is local to this translation unit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This commit is a continuation of commit 739b27427c,
in which a substring comparison was replaced by equality comparison to
avoid confusing UI behavior of the filter interface.
The suit and buddy filters were plagued by the same problem, so change
their code in analogy.
Fixes#551 (in conjunction with commit dd2466f518).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Pass the planner state struct to the profile computation so it can use
deco_time and first ceiling to display VPM-B ceiling.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
For UI responsiveness, we need to be able to run the planner in the background. This needs the
planner state to be localized (and we need to pass a pointer around).
In order to not let too many lines overrun (and to save typing in the future)
I have renamed instances of struct deco_state to ds. Yes this should have gone
to a separate commit but I accidentally commit --amend'ed it.
Computing of planner variations is temporarily disabled.
Unlock the planner when returning early
So we don't deadlock in add dive and recreational mode (which
use the planner without actually planning).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Update the filters if the list of dives is updated by calling
MultiFilterSortModel::instance()->myInvalidate();
This had the side effect of clearing all selections. Thus, in
the repopulate() methods of the FilterModels, check those
entries that were checked previously. Since all the filter
models use the same code, introduce a base class FilterModelBase.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This replaces a dynamically allocated array of bool by std::vector<char>.
1) This makes the code shorter and less error prone, because memory
management has not to be done by hand.
2) It fixes a bug in the old code:
memset(checkState, false, list.count()) is wrong, because bool is
not guaranteed to be the same size as char!
Two notes:
1) QMap<>, QVector<>, etc. are used numerous times in the code, so
this doesn't introduce a new C++ concept. Here, the std:: version
is used, because there is no need for reference counting, COW
semantics, etc.
2) std::vector<char> is used instead of std::vector<bool>, because
the latter does a pessimization where a bitfield is used!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The location filter used a substring comparison, which had
the side effect that dives with the location "Test 1" were
shown when filtering for "Test 12".
Moreover, avoid a deep copy of the location list. This is
done by looping over one item less than rowCount() instead
of removing the last item. While doing this, remove an
unnecessary if-statement.
This commit partially fixes#675.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Fix an indentation issue in qt-models/diveplannermodel.cpp.
An if was indented as if it were part of an outer if.
Correct indentation confirmed by Stefan Fuchs <sfuchs@gmx.de>.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This patch allows updating the location of map markers
while editing a dive site and updating the text in the
LocationInformationWidget in real-time.
Currently it is only possible to see the marker changes by
clicking 'Apply'.
The modification required the following changes:
- add the MapWidget::updateCurrentDiveSiteCoordinatesToMap() slot
and call it each time the GPS text updates
- separate the updateCurrentDiveSiteCoordinates(FromMap/ToMap) logic
by having the FromMap/ToMap suffix to method names
- make MapWidgetHelper::updateCurrentDiveSiteCoordinatesToMap()
call a new MapLocationModel::updateMapLocationCoordinates()
method, which updates selected location coordinates and the model
- add MapLocation::setCoordinateNoEmit() that does not emit
a signal when updating a coordinate
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
After we download new dives we need to try to autogroup them.
In Subsurface this is done when we refresh the dive list. Here
we might be better off doing it right after processing the new
dives.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When deleting a cylinder the mapping was not filled with all
necessary values. Values for cylinders before deleted cylinder were
missing.
Plus do the endRemoveRows at the right time.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
This is a amendment to 24bd5a8dce
Move the cylinder also to first position if first planner datapoint
cylinder change because a row is added or deleted to the dive datapoints.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
When changing the date/time of a dive in the planner the dive may end
up in a totaly new position in respect to date/time of other dives in
dive list table. It can be moved to the past or the future before or after
other existing dives. It also could overlap with an existing dive.
This change enables identification of a new "virtual" dive list position
and based on this starts looking for previous dives.
Then it (as before the change) does init the deco calculation with any
applicable previous dive and surface interval.
If some of these applicable dives overlap it returns a neg. surface time
which is then used in the planner notes to prohibit display of results.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
To compute the heatmap value, we need the current gasmix but
the current cylinderindex is no longer available.
Fixes#562
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
In the planner it is best practise to start the dive with the first
gas in the gaslist. Otherwise one would get a gaschange event at the
very beginning of a dive.
This change implements the following feature:
Automatically move a gas to position 0 in the gaslist if the user selects
this gas for the first dive data point.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
In the planner if one adds two or more cylinders with the same gasmix
(e.g. back gas and bottom stage 18/45) the drop down and data in the
used gas column of the planner points table will be filled with a more
verbose string mentioning also the cyl number and the cyl type
description.
Makes it easier in such a case to select the right cylinder.
Introduces also a helper function which tells you if there is another
cylinder with the same gasmix as the provided cylinder.
This also has an option if it should consider unused cylinders or not.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Be even more restrictive regarding which cylinders can be removed from
the cylinder table in the planner.
Only if a cyliner is not used in the planned part of the dive
it can be removed.
It doesn't matter if there is another cylinder with same gasmix.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Wire up the UI elements (QSpinBoxes) for ascend rates (4x) and descend rate
(1x) correctly so that the profile and calculation is updated immediately
after the value is changed (e.g. increased/decresed by 1) by clicking
the QSpinBox arrows.
Until now one had to click into the profile or change another planner
preference first before the change became effective.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
The `static int defaultWidth[]` definition in divelistview.cpp
could potentially end up missing an element which can later result
in out-of-bounds access when iterating through the list of
columns and updating their widths.
Add a couple of methods in DiveTripModel for setting and getting
the widths and use those. The default values are now pre-set in a
QVector in the DiveTripModel() constructor.
Throw warnings if out-of-bounds columns are requested.
Reported-by: Gaetan Bisson <bisson@archlinux.org>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Calculating dive.when + dive.duration doesn't always give the correct
endtime of a dive especially when a dive has surface interval(s) in
the middle.
Using the helper function dive_endtime() fixes this issue.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
This option should have never been there. This is not how
gradient factors are supposed to work. It would only trick
users to use the wrong value..
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Print out partial derivatives of stop times with respect to
variation of depth and duratin of last manual segment.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
...rather than use a global variable and a macro.
This should be a no-op in preparation to allow planning
several versions of a dive.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This is really unrelated to my recent "multiple gas pressures" work, but
the test case from Gaetan Bisson showed that the logic for which
cylinders to show in the equipment tab was less than optimal.
We basically used to show only cylinders that were actively used, unless
you had the "display_unused_tanks" preference option set. That comes
from some dive computers reporting a *lot* of cylinders that the diver
really doesn't even have with him on the dive. And showing those extra
dummy cylinders gets pretty annoying after a time, which is why we
default to not showing unused tanks.
However, in Gaetan's case, he had a total of four cylinders on the dive:
the O2 and diluent bottle for the rebreather dive, and then bailout
bottles (both air and deco). And while the bailout bottles weren't
actually used, Gaetan had actually filled in all the pressure details
etc for them, and so you'd really expect them to show up. These were
*not* just some extraneous default cylinder filled in by an over-eager
dive computer.
But because the bailout wasn't used, the manual pressures at the end
were the same as at the beginning, and the "unused cylinder" logic
triggered anyway.
So tweak the logic a bit, and say that you show cylinder equipment not
only if it has been used on the dive, but also if it has any pressure
information for it.
So the o nly cylinders we don't show are the ones that really have no
interesting information at all, except for possibly the cylinder tank
type itself (which is exactly what the over-eager dive computer case
might fill in, usually in the form of a default cylinder type).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I thought we had this automated, but Lubomirs commits introduced a few
files with dos line endings. This is purely a change of line endings, no
other changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
getRole() returns a QVariant and the cast is a small overhead.
Using these helpers will reduce the overhead.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The MapLocation QObject now has a QString property "name", which is
translating the dive_site->name member.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The idea of this flag is to be able to only to emit the
selectedLocationChanged() signal when the user clicked on the map
(fromClick == true).
MapWidgetHelper::selectedLocationChanged() listens for this signal
and only then it will select nearby dives based on a "small-cicle".
If "fromClick" is false, it's the backend or the dive list that
updated the selection and MapWidgetHelper::selectedLocationChanged()
should no be called.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
getMapLocationForUuid() accepts a UUID, searches the MapLocation table
and returns a pointer.
Make use of the new method in setSelectedUuid().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Inside the QML Map class there is a MapItemView item.
This item uses a delegate that receive a "model" property from
the MapLocationModel, but infact that's a QObject with the MapLocation
defined properties. That's how MapItemView works.
The problem here is that "model" QObject cannot be cast back
to a MapLocation as the meta data in there does not include
a MapLocation sub-class, for some reason.
Even if using propery() on that QObject to fetch data like coordinates
works, instead of storing this strange object pointer, store the
MapLocation UUID (from dive_site) which is a uint32_t.
setSelectedUuid() deals with this oddity and finds the correct
MapLocation pointer in the table and dispatches a selectedLocationChanged()
signal for it.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The "uuid" property will be the one from the dive_site. At first it
will also be used to track the active marker/flag selection.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This method should be used if many markers are added at once.
It's main purpose is to reduces the number of beingInsertRows()
calls.
Make MapWidgetHelper::reloadMapLocations() use it.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Instead of maintaining a seperate latitude/longitude values
in C++ and passing them to QML separatelly, pass them as a QGeoCoordinate.
This reduces the number of model "roles" and also prevents the creations
of extra objects in QML (e.g. via QtPositioning.coordinate(..)).
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
- add() will be used to add a MapLocation to the model with
beginInsertRows()...endInsertRows()
- clear() will be used to clear the model with beginRemoveRows()...
endRemoveRows()
NOTE: emiting dataChanged() does not seem to update the QML view for
this model so calling being<..>Rows() seems to be the "correct Qt
approach" to do this.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The QML Map widget requires a QAbstractListModel based model to operate
with good performance. Technically gpslistmodel.cpp can be used for that
same purpose (e.g. has GPS coordinates), but the way it updates
may complicate the Map widget integration.
Thus, a new model is created - MapLocationModel, with items of type
MapLocation, for an attempt for a clean project structure on the C++ side.
For now it only handles latitude and longitude.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This finally handles multiple cylinder pressures, both overlapping and
consecutive, and it seems to work on the nasty cases I've thrown at it.
Want to just track five different cylinders all at once, without any
pesky gas switch events? Sure, you can do that. It will show five
different gas pressures for your five cylinders, and they will go down
as you breathe down the cylinders.
I obviously don't have any real data for that case, but I do have a test
file with five actual cylinders that all have samples over the whole
course of the dive. The end result looks messy as hell, but what did
you expect?
HOWEVER.
The only way to do this sanely was
- actually make the "struct plot_info" have all the cylinder pressures
(so no "sensor index and pressure" - every cylinder has a pressure for
every plot info entry)
This obviously makes the plot_info much bigger. We used to have
MAX_CYLINDERS be a fairly generous 8, which seems sane. The planning
code made that 8 be 20. That seems questionable. But whatever.
The good news is that the plot-info should hopefully get freed, and
only be allocated one dive at a time, so the fact that it is big and
nasty shouldn't be a scaling issue, though.
- the "populate_pressure_information()" function had to be rewritten
quite a bit. The good news is that it's actually simpler now, although
I would not go so far as to really call it simple. It's still
complicated and suble, but now it explicitly just does one cylinder at
a time.
It *used* to have this insanely complicated "keep track of the pressure
ranges for every cylinder at once". I just couldn't stand that model
and keep my sanity, so it now just tracks one cylinder at a time, and
doesn't have an array of live data, instead the caller will just call
it for each cylinder.
- get rid of some of our hackier stuff, like the code that populates the
plot_info data code with the currently selected cylinder number, and
clears out any other pressures. That obviously does *not* work when you
may not have a single primary cylinder any more.
Now, the above sounds like all good things. Yeah, it mostly is.
BUT.
There's a few big downsides from the above:
- there's no sane way to do this as a series of small changes.
The change to make the plot_info take an array of cylinder pressures
rather than the sensor+pressure model really isn't amenable to "fix up
one use at a time". When you switch over to the new data structure
model, you have to switch over to the new way of populating the
pressure ranges. The two just go hand in hand.
- Some of our code *depended* on the "sensor+pressure" model. I fixed all
the ones I could sanely fix. There was one particular case that I just
couldn't sanely fix, and I didn't care enough about it to do something
insane.
So the only _known_ breakage is the "TankItem" profile widget. That's
the bar at the bottom of the profile that shows which cylinder is in
use right now. You'd think that would be trivial to fix up, and yes it
would be - I could just use the regular model of
firstcyl = explicit_first_cylinder(dive, dc)
.. then iterate over the gas change events to see the others ..
but the problem with the "TankItem" widget is that it does its own
model, and it has thrown away the dive and the dive computer
information. It just doesn't even know. It only knows what cylinders
there are, and the plot_info. And it just used to look at the sensor
number in the plot_info, and be done with that. That number no longer
exists.
- I have tested it, and I think the code is better, but hey, it's a
fairly large patch to some of the more complex code in our code base.
That "interpolate missing pressure fields" code really isn't pretty. It
may be prettier, but..
Anyway, without further ado, here's the patch. No sign-off yet, because I
do think people should look and comment. But I think the patch is fine,
and I'll fix anythign that anybody can find, *except* for that TankItem
thing that I will refuse to touch. That class is ugly. It needs to have
access to the actual dive.
Note how it actually does remove more lines than it adds, and that's
despite added comments etc. The code really is simpler, but there may be
cases in there that need more work.
Known missing pieces that don't currently take advantage of concurrent
cylinder pressure data:
- the momentary SAC rate coloring for dives will need more work
- dive merging (but we expect to generally normally not merge dive
computers, which is the main source of sensor data)
- actually taking advantage of different sensor data from different
dive computers
But most of all: Testing. Lots and lots of testing to find all the
corner cases.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a very timid start at making us actually use multiple sensors
without the magical special case for just CCR oxygen tracking.
It mainly does:
- turn the "sample->sensor" index into an array of two indexes, to
match the pressures themselves.
- get rid of dive->{oxygen_cylinder_index,diluent_cylinder_index},
since a CCR dive should now simply set the sample->sensor[] indices
correctly instead.
- in a couple of places, start actually looping over the sensors rather
than special-case the O2 case (although often the small "loops" are
just unrolled, since it's just two cases.
but in many cases we still end up only covering the zero sensor case,
because the CCR O2 sensor code coverage was fairly limited.
It's entirely possible (even likely) that this migth break some existing
case: it tries to be a fairly direct ("stupid") translation of the old
code, but unlike the preparatory patch this does actually does change
some semantics.
For example, right now the git loader code assumes that if the git save
data contains a o2pressure entry, it just hardcodes the O2 sensor index
to 1.
In fact, one issue is going to simply be that our file formats do not
have that multiple sensor format, but instead had very clearly encoded
things as being the CCR O2 pressure sensor.
But this is hopefully close to usable, and I will need feedback (and
maybe test cases) from people who have existing CCR dives with pressure
data.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We currently carry two pressures around for all the samples and plot
info, but the second pressure is reserved for CCR dives as the O2
cylinder pressure.
That's kind of annoying when we *could* use it for regular sidemount
dives as the secondary pressure.
So start prepping for that instead: don't make it "pressure" and
"o2pressure", make it just be an array of two pressure values.
NOTE! This is purely mindless prepwork. It literally just does a
search-and-replace, keeping the exact same semantics, so "pressure[1]"
is still just O2 pressure.
But at some future date, we can now start using it for a second sensor
value for sidemount instead.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The trick is to pick a path that is accessible from other applications.
In theory QStandardPaths::GenericDataLocation should provide that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user clicks "Accept" when no dives were downloaded we would otherwise
dereference unitialized memory.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I don't know why we are setting lastIndex to -1. That seems odd.
But for now this workaround will have to do.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When you start a new session with Download from DC, clear out the table
from the last attempt before adding the page.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
MAX_TANK_INFO is a new macro in dive.h to define the
maximum number of tank_info_t objects.
TankInfoModel's data() and setData() now check for valid
row indexes before accessing the tank_info[] array directly.
Without this patch TankInfoMode::data() can cause a SIGSEGV.
Reported-by: Pedro Neves <nevesdiver@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The used time format was h:mh: i.e. 1:16h:
This patch gets rid of the colon after the hour indicator.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
all qDebug / qCDebug and friends now will be properly
logged into developer -> log, on QML.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QML and C++ model don't interact too much, a new Rule
should be created and used on the QML
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way they get correctly prepared and derived data fields
get populated. For example, the dive number gets updated if
these are indeed the newest dives.
Fixes#408
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I noticed this in the mobile download code when fixing an unrelated
issue - and then realized that the same was true in the desktop app
as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When (with mobile on desktop) loading from DC is called and the dive computer
to connect to is not in download mode, the repopulate() function is called
with an empty dive table. This trips the assert (obviously, debug compile only) in
DiveImportedModel::setImportedDivesIndexes(). This simple fix makes things just
more robust.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This already takes into account which of those dives were selected.
Right now all we have is select all or none - this needs actual support
in the UI, but once that's there, it will just work (famous last words).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Still to do:
- select the dives to save
- record the downloaded dives
but download is already working. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is important to not duplicate code for the Qml
view. Now the DownloadFromDiveComputer widget is mostly
free from important code (that has been upgraded to the
core folder), and I can start coding the QML interface.
There are still a few functions on the desktop widget
that will die so I can call them via the QML code later.
I also touched the location of a few globals (please, let's
stop using those) - because it was declared on the
desktop code and being used in the core.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Update the function to create the dive duration string in a way that
it can be used also in info and stats tab and added some more flexibility.
Changed layout for <1h freedives to "0:05:35" (w/o units) or "5:35min"
(with units and :) or "5min 35sec" (with units with space).
Add a new function to create the surface interval string.
Completely remove old function get_time_string() and get_time_string_s().
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
We now respect the settings in the preferences and also only show
the duration as minutes and seconds if the dive is a free dive.
Fixes#361Fixes#362
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
See https://github.com/Subsurface-divelog/subsurface/issues/345. The
menues where not translated. The basis of this error is a simple
typo in core/taxonomy.c where the classname was mis-spelled in the
QT_TRANSLATE_NOOP. In addition, to pull and translate the strings
from C code, the normal tr() does not work, and the functionality
from the gettextfromc class is used.
Fixes: #345
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
With current code when re-planning a dive the planner output in the
dive notes is always moved down by one line.
This fix avoids that this additional line break is added.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
This is another attept at the problem if identifying a potentially
user supplied text in the dive notes upon replannig a dive.
It gets rid of the user visable position markers (*!* and ***) and
cirumvents problems with mark-up by first converting the old notes
to plan text (assuming that user only enters plain text in the notes
field as we do in other places as well). Then the automatically added
part is identified by locating the disclaimer in the text (if the user
edited/delted the disclaimer or changed langue in between it is her
problem to manually delete the old plan).
Everything from the disclaimer on is deleted and replaced by the new plan.
If the disclaimer is not found, the new plan is appended to the old notes.
This way we make sure no information gets automatically deleted.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
When replanning a dive, the setpoint information from the profile waypoints
were reset to 0, resulting in a dive that has a dive mode of CCR, but only with
OC legs in the profile. This is just wrong, and is corrected here. Notice
that there is no averaging involved (in the reduction of a replanned real
dive that has more than 100 waypoints) as is done for depth. This is just
fine for setpoint data.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
New strategy to identify old planner output in notes when
replanning a dive: Text anchors ("*!*" and "***") added for planner output
For backwards compatibility: If there is no anchor but an old table
delete everything.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Don't add the last stop with addstop for correcting the lenght
of the dive if planner generated points can be removed when replanning.
Otherwise this will not be deleted when replanning a dive.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Upon replanning a dive, we want to delete the old
dive plan in the notes and replace it with the actual.
This fixes a problem when we failed to detect the old plan due
to the deco model name appearing in the disclaimer that was used
as a marker for the notes.
This patch also adds translation markers for the deco model name strings..
Fixes#285
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Wfloat-conversion enabled for C++ part of the code
Fix warnings raised by the flag using lrint
Original issue reported on the mailing list:
The ascent/descent rates are sometimes not what is expected.
E.g. setting the ascent rate to 10m/min results in an actual
ascent rate of 9m/min.
This is due to truncating the ascent rate preference,
then effectively rounding up the time to reach each stop to 2s intervals.
The result being that setting the ascent rate to 10m/min
results in 20s to ascend 3m (9m/min), when it should be exactly 18s.
Reported-by: John Smith <noseygit@hotmail.com>
Reported-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
Second attempt to do the thing with the red background color for cylinder
start and end pressure correctly. This now should cover all scenarios.
This rewrites and partitially reverts commit b8e044d
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Display the correct trash or trashforbidden icon and tooltip in the cylinder table.
This should fit together with if it is really possible to remove a cylinder.
Search for "same gas" based on used cylinders only. Otherwise one could remove
a used cylinder because there is an unused cylinder with same gas.
ToDo:
In planner update trash icon on change of planner points.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
... for consistency, while we are at it.
There are still some internal depth variables which are ints
somebody might take a go at those.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This is needed in the altitude pressure conversion as there
negative altitudes are possible (for diving in the netherlands
or the Dead Sea).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Add minimum gas calculation to planner output.
Add the two UI parameters prefs.sacfactor and prefs.problemsolvingtime.
Connect UI signals and slots for recalculation of diveplan.
Disable minimum gas calculation if there was already a warning before.
If minimum gas result is larger then cylinder start pressure give warning message instead of result.
Add line break before pO2 warnings but only if warnings exist.
Signed-off-by: Joachim Ritter <jritter@bitsenke.de>
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
In the cylinder table today the cylinder start and end pressure fields
are marked red and the end pressure font is set to italic if cyl->end is 0.
But sometimes with planned dives there is no cyl->end but only cyl->sample_end.
This is taken into account now.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Using gcc option "-Wfloat-conversion" is useful to catch
potential conversion errors (where lrint should be used).
rint returns double and still raises the same warning,
this is why this change updates all rint calls to lrint.
In few places, where input type is a float, corresponding
lrinf is used.
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
The Qt model sorting for the dive date was using a unsigned number,
which doesn't work for dates before 1970.
Also, the dive date parsing got the year 1900 wrong. Not that we really
care, because other parts of date handling will screw up with any date
before the year 1904. So if you claim to be diving before 1904, you get
basically random behavior.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the function in every place instead of once using it and once copying the code again.
No functional change.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
It's not too clever to give 0 a special meaning (as here:
use same gas as for previous leg) when 0 is a legitimate
value.
This should solve Willem's gas disappearance problem when
reediting a dive in the planner.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
In the cylinder table, the last column ("use") always showed
OC-GAS. Editing was enabled, but the user had to guess to enter
a small integer meaning dilluent or CCR oxygen cylingder. I guess,
nobody has ever done that.
This patch makes this column clickable. A click toggles if the cylinder
is used for planning or not. This wait it is much easier to investigate
the consequences of gas loss on a plan.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Gas switches appear as special samples with zero or one second duration.
Those can be confusing when they appear as zero duration in the dive plan
when replanning, so better suppress theose.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This reverts commit adaeb506b7.
commit a8e8d56ec0 ("Tweak cylinder equipment tooltips") does a much
better job allowing the user to know the true volume of the cylinder
(given the gas entered) and clutters the UI a lot less.
While playing around with the current subsurface, I realized that while we
give the gas volume and Z factor for the beginning/end pressures in the
newly added tooltips, there is no way to actually see that same
information for the working pressure.
So if you have filled in cylinder type information, but don't have any
actual gas usage information, there will be no cylinder tooltips at all.
But you might still want to know what the actual volume for a particular
cylinder is, and what the Z value for that working pressure is.
So this tweaks the tool-tips a bit.
When mousing over the pressure fields (ie "working pressure", "start" and
"end"), it now always gives the cylinder gas volume and Z factor for that
pressure, so for example on an AL72 that has a working pressure of 3000
psi and that contains air the tooltip will say:
69 cuft, Z=1.040
when you mouse over the working pressure field (that's obviously with
imperial units, in metric you'll see liters of gas).
When mousing over the type/size field, it gives the used gas amounts, ie
something like this:
37 cuft (82 cuft -> 45 cuft)
but if the cylinder doesn't have starting/ending pressures (and thus no
used gas information), this patch will make subsurface show the working
pressure data instead, so that you at least get something.
This all seems more useful than what my first version gave.
NOTE! This makes commit adaeb506b7 ("Show both the nominal and "real"
size for an imperial cylinder") kind of pointless. You now see the real
size in the tooltip when you mouse over the size, and now it actually
works both for imperial and metric people, so the tooltip is in many ways
the better model.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds tooltips for the equipment tab for each cylinder, showing the
amount of gas used.
When you mouse over the size and working pressure fields, the tooltip will
show the amount of gas used (along with start and end gas volumes). And
when you mouse over the start and end pressures, it will show the start
and end gas volumes, and the Z factor used.
I started doing this because of the gas volume questions in the last day
or two (and a few from a few weeks ago). When even Robert Helling starts
wondering about the effects of compressibility on the SAC calculation, our
numbers are clearly too opaque.
With these tooltips, at least you can see what went into the used gas
calculations, instead of having to add debugging options to print out Z
factors.
[ This patch also adds a "rint()" to get the rounding right in the
gas_volume() function. Although rounding to the nearst milliliter
really doesn't matter, it's the right thing to do after doing FP
calculations ;^]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
By using SettingsObjectWrapper, the planner settings can be saved and restored
correctly
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is to avoid confusion with planner.display_deco_mode.
When accessing the "current deco mode" use the decoMode()
helper function.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Please apply this patch on top of the previous patch with the same title.
1) Provide icons with white margin to look more like photos
2) Optimise code, following Robert's suggestions.
3) Column heading for photos column is now: Photos. This takes up extra
horizontal space but makes the user interface more understandable.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
1) Add an extra column to dive list, just left of Locality field.
2) For each dive, give summary of photos as follows:
i) no photos: no icon in that column
ii) photos taken during dive: show icon of fish
iii) photos taken before/after dive: show icon of sun
iv) photos taken during as well as before/after dive: show
icon with both fish and sun
3) Provide information for the sort operation to work on
this column of the dive list.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This can happen when the user asks to replan a dive that
was imported from CSV.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Call GasSelectionModel::instance()->repopulate() when creating the initial
simple dive. Without this call, the gas selection dropdown list does not work
in the DivePLannerPointsModel table until the cylinders table has been edited.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Separate the VPM-B conservatism preference into diveplan.vpmb_conservatism for
planning dives and prefs.vpmb_conservatism for profile ceiling display of
saved dives.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Subsurface uses "local time" which in particular means we never
display time zone information to the user. The user (and our file
format) only sees times like 5pm or 17:00. A better name than
local time (which could mean "local at the dive spot) would
be "watch time", the time displayed by the diver's watch when
she entered the water.
Internally, we store times as time_t, seconds since Jan 1 1970 0:00
UTC. Our convention for conversion between 5pm and time_t as always
been to treat 5pm as if it were UTC.
Then confusion arose since Qt's QDateTime (which is tied to UI elements
like QTimeEdit and similar) is time zone aware and by default assumes
the system time zone. So when we set a QDateTime to 5pm and then later
convert it to time_t we have to take care about the difference between
UTC and the system time zone.
This patch unifies our solution to this problem: With it, we set all
QDateTime's time zone to UTC. This means we don't have to correct for
a time zone anymore when converting to time_t (note, however, the
signedness issue: Qt's idea of time_t is broken since it assumes it
to be unsigned thus not allowing for dates before 1970. Better use the
millisecont variants).
We only need to be careful about time zones when using the current time.
With this convention, when assigning the current time to a QDateTime, we
need to shift for the time zone since its value in UTC should actually be
the watch time of the user who is most likely used to the system time zone.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit b1ed04a means that DivePlannerPointsModel::rememberTanks() and related
functions and variables are no longer required
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
