This is an attempt to fix issue #1896. While this seems a Qt issue in
combination with very specific Android devices, this might be a fix. Do
not check for a very specific state of the local BT controller, but just
check if it is powered on.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
In commit 6bf4120dbb the trip-flags
were replaced by a simple boolean. This made the was_autogen
parameter to the remove_dive_from_trip() and unregister_dive_from_trip()
functions unused. Remove these parameters.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Make it easier for new contributors to get going by making the
Signed-off-by line more clearly explained.
Signed-off-by: John Plaxco <john@johnplaxco.com>
Capitalize the first letter of error message sentences in this
file to be consistent with other error messages in this file
and across the project.
[Dirk Hohndel: edit to remove the changes to the .ts files]
Signed-off-by: John Plaxco <john@johnplaxco.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should make our mac builds on Travis faster.
This also switches to the latest xcode / VM image which helps speed things up
(less to update for Homebrew). It turned out that that app directories that we
were creating here didn't run for people, anyway, so why even bother with an
old image.
We still create / upload that image (simply in order to be able to peek into it
in case something goes wrong).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If no dives are selected when trying to export a selection, a message
is shown that no dives were selected, but it's immediately hidden
behind a message saying that a temporary file could not be created.
In fact, the creation of the temporary file wasn't never attempted,
so the message that the user actually sees is misleading.
The solution chosen here is to duplicate the check that at least some
dives are selected, and abort early if that case is detected, rather
than continuing on to show the additional misleading message. Not
elegant, but it gets the job done.
Better solutions to this include refactoring prepare_dives_for_divelogs
to return something more descriptive than a bool, remove that check
from prepare_dives_for_divelogs entirely since it doesn't seem to be
a good fit there, or switch to exceptions for handling these problems
rather than return values. I don't have sufficient familiarity with
the codebase to attempt these more invasive changes, but they
should be considered in the future.
On a final note, some of the other error messages in this file start
with a capital letter, but the one relevant to this particular PR
does not. Again, I'm not familiar enough with the codebase (or
translations) to know if that's safe to change, so I'll leave that
for another time or another developer.
Reported-by: John Plaxco
Signed-off-by: John Plaxco <john@johnplaxco.com>
Updates to the user manual for Subsurface-mobile. Many new
figures have been brought in. The text has been overhauled
to include latest features and some features that do not
exist any more have been removed. Text has been added,
explaining the copy-and-paste operation (Thanks, Miika).
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Instead of trying to update this whenever the connection text changes,
instead deal with it right before it actually gets used.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For some devices the BT device name is different from the product name.
Make sure that name is available to the mobile UI. This helper fills it
in from the scan data (based on the device address).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Just like with the Aqualung i770R in 7697003498 this name follows the
pattern of a model number in ASCII encoding, followed by the serial
number of the device.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Apparently this does the trick of updating the dive list when pasting
data on mobile. Tnx janmulder.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Unsure where this bug got introduced, but when asking for the dive
time to be shifted 1 hour later, the divelist and the dive details
showed 1 our earlier.
Fixes: #1893
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
To make data flow more clear, unglobalize the downloadTable object.
Make it a subobject of DownloadThread. The difficult part was making
this compatible with QML, because somehow the pointer to the
download-table has to be passed to the DiveImportedModel. Desktop would
simply pass it to the constructor. But with objects generated in QML
this is not possible. Instead, pass the table in the repopulate()
function. This seems to make sense, but for this to work, we have to
declare pointer-to-dive-table as a Q_METATYPE. And this only works
if we use a typedef, because MOC removes the "struct" from "struct
dive_table". This leads to compilation errors, because dive_table is
the symbol-name of the global dive table! Sigh.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To not have to bother with memory-management. Moreover, the
old code was in principle wrong, since it assumed that
sizeof(bool) == 1. Of course, this is true for all supported
platforms, but let's not depend on such implementation-defined
behavior anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This function resets the DiveImportedModel. It takes two
arguments: first and last index. All callers passed in 0
and number-of dives anyway, so remove the arguments.
Since this now does the same as repopulate(), merge the
two functions.
Moreover, implement Qt-model semantics by using a
beginResetModel()/endResetModel() pair. This simplifies the
code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
DCDeviceData was using that weird pattern where the instance
variable was set in the constructor. There is no apparent
reason to do so, therefore convert to a "normal" singleton.
Access that directly in QMLManager instead of saving it in
a member variable first.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The simplified filter-widget doesn't present lists of existing values
with counts. Thus, a whole slew of count_dives_with_*() functions
can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
- Enable BLE support for the Oceanic Pro Plus X
- Add support for the Aqualung i300C
- Fix the Pro Plus X gas mixes
- Add a workaround for invalid ringbuffer begin pointers
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Wire up the needed code to filter the data in the myInvalidate
call. The data comes from the Struct FilterData and if any
of the test conditions on the filter function are false, the
filter will assume that the specific dive shouldn't be shown
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The idea is that this struct will have all the needed data
that will be passed to the filter model. Everything that happens
on the filterwidget will fill out this struct, then forward it
to the model, that in turn will activate the filter hiding
some of the dives that matches on your divelist.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Register the new FilterDive widget on the mainwindow
so we can trigger a shortcut to display it.
The shortcut currently doesn't exists.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The idea of this new widget is to be able to filter more
types of data, while keeping it simple and extending the
feature set to something that was impossible with the old
implementation.
While the old implementation had 4 panels that you could
use to filter specific tags / people / types of dives
the new one will let you filter by visibility, temperature
people, name, equipment, etc, in a more natural way
than the old one.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
These two functions were called in different contexts:
- unregister_dive(): from the undo-commands to remove the dive
from the global dive table, but not delete it. The dive was
already removed from its trip.
- delete_single_dive(): from non-undo code. Most of it not in
use and removed in a sibling-commit. Here, the dive is supposed
to be removed from its trip and a new selection is calculated.
delete_single_dive() calls unregister_dive(), which removes the
dive from its trip. Move remove_dive_from_trip() from the former
to the latter and make both functions independent. Instead
of deleting the dive explicitly in delete_single_dive(), call
the delete_dive_from_table() function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
All callers of add_dive_to_trip() work on freshly generated dives,
with one exception, that was redundant anyway. Therefore it is not
necessary to remove the dive from a potential previous trip. Move the
responsibility of removing the dive from a trip to the caller,
respectively remove the redundant call. Add a warning message in the
case that trip is set.
Background: On import (either download or file-import) we might not
want to add trips to the global trip-list. For example to enable undo
of import but more generally to detangle that data flow. Thus,
add_dive_to_trip() should not mingle with the global trip-list,
which it has to do if a trip is deleted because the old dive was
removed.
Analysis of the add_dive_to_trip() callers:
1) core/dive.c
pick_trip():
called on freshly generated merged dive.
finish_split():
called on two freshly generated split dives.
2) core/divelist.c
create_and_hookup_trip_from_dive():
called on freshly downloaded dive in dive_cb().
called on freshly downloaded dive in record_uemis_dive().
autogroup_dives():
called on dive from get_dives_to_autogroup(), which only
finds dives that are outside of trips.
combine_trips():
unused - removed in sibling commit.
try_to_merge_into():
this call was actually erroneous - dive was already added
to trip in try_to_merge(). Remove call.
3) core/libdivecomputer.c
dive_cb():
called on freshly downloaded dive.
4) core/uemis_downloader.c
record_uemis_dive():
called on freshly downloaded dive.
5) core/load_git.c
create_new_dive():
called on freshly allocated dive.
6) core/parse.c
dive_end():
called on freshly parsed dive.
7) desktop-widgets/command_divelist.cpp
DiveListBase::addDive():
called on dive which is newly added to core.
moveDiveToTrip():
called on dive that was removed from trip a few lines above.
8) mobile-widgets/qmlmanager.cpp
QMLManager::undoDelete():
called on dive where divetrip was reset in the previous line.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In 302f6adb79 dive-splitting was made
undo-able. To this goal, the dive-splitting functions were split in
two types: Those that operate directly on the divelist and those that
only allocate the dives. The former are not in use anymore, therefore
remove them. Since only the latter remain, remove the "_dont_insert"
appendix of the name.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In 014c04f8bd merging dives was included
in the undo-system. This made the merge_two_dives() function caller-less.
Remove it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In f427226b3b autogrouping / removal
of autogrouping was moved into the undo-machinery. This made the
remove_autogen_trips() function caller-less. Remove it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In f427226b3b a combine_trips_create()
function was introduced that combined trips without deleting the old
trips. This was necessary for making combine-trips function undo-able.
The old combine_trips() function is not used anymore. Therefore remove
it. Rename the combine_trips_create() function to combine_trips() as
no differentiation is needed anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In moveDivesBetweenTrips() a the model is informed of dives
that are moved between trips. A flag tells the model to delete
empty trips. If dives were removed in batches [use case: split
a big trip into multiple smaller trips] the flag would be sent
for every batch. This was handled gracefully by the model code,
but it gave a warning message.
Set the flag only for the last batch, when the trip is *really*
empty.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, when selecting "Load media files even if time does not
match the dive time", the media are added to *all* selected dives.
Instead add it to the closest dive.
This seems like the less surprising behavior. Of course now if the
user really wants to add a media file to multiple dives, they will
have to do it manually.
To avoid a messy interface, this is solved by moving the iterate-
over-selected-dives loop to the core. Thus, a helper-function can
be made local to its translation unit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
At this point in time there seems something wrong with jcenter that
is used to download all Android build artifacts from. It simply does
not find the needed stuff on there and our build fails. Its unclear
if this is a temporary issue at jcenter, or its just an intended change.
This fix is a bit of a hack. It provides our own gradle build spec
instead of the one that is provided from Qt (which is pulled in using
androiddeployqt). Added is a working download link to maven, and a
newer com.android.tools.build:gradle is used compared to Qt.
All this makes Travis happy again.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
dive_create_picture() is called from DiveListView::matchImagesToDives()
with a copy of the picture-filename. But:
- On error the filename is not freed
- On success the filename is strdup()ed
Thus, in all cases the memory is lost. Instead, pass in a temporary
buffer using qPrintable().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
... otherwise this change is not saved when saving to git.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Commit 911edfca71 changed the dive list
on desktop to update positions of trips when adding/removing dives.
A very unlikely case, but necessary for consistency.
For a trip to be moveable down, its index has to be one-less than
the maximum index, which is "items - 1". The code was doubly wrong:
it forget the "1" and checked for less-or-equal instead less-than.
Thus this was effectively an off-by-two error. Fix it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Make sure all required Android SDK components are explicitly installed
before starting the actual build.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
