add enum to qPref and remove elsewhere
update source core to reference qPref.
the enum cannot be in pref.h because it is to be used in qml and Q_ENUM
need the enum to be defined as part of the class
Signed-off-by: Jan Iversen <jani@apache.org>
The info text from the download process wasn't rendered correctly.
maximumWidth ended being a recursive reference and as a result the text
would render as very narrow and super-tall field.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt 5.11 adds useful warnings when code attempts to use anchors within
Layouts and even tells you how to fix things.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
remove MapWidget entries from mobile-resources.qrc, and
reference map-widget.qrc in Subsurface-mobile.pro for iOS
Signed-off-by: Jan Iversen <jani@apache.org>
This is based on something that Anton Ludin sent to the mailing list.
Reading through the code it seemed that there were scenarios in which
DC_vendor and DC_product were not updated correctly. That's one of the
problems of the declarative approach in QML - it can be very hard to
figure out which code is run when in certain situations.
This may help address the issue with FTDI downloads no longer working on
Android.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The asynchronous load seemed to be (at least one of) the culprit(s) of
the banner occasionally not showing up.
Making the font for the cloud ID smaller looks better (and works much
better for long email addresses).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
That change clearly would have benefited from better code review.
This is a superset of a change proposed by Jan Iversen.
Closes#1406
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For some reason Kirigami.Icon mess up icon display when filename
extension is omitted. Because of this a perfectly good, scalable svg
show up as a low resolution scaled up icon.
Signed-off-by: Murillo Bernardes <mfbernardes@gmail.com>
calls to savePreferences was moved to prefs. in
b8eb348f54, but the corresponding
C++ code was not merged.
Revert call to savePreferences to manager.
Signed-off-by: Jan Iversen <jani@apache.org>
The commit secured that plotDive was not called before actually being used.
However our (rather fragile) C++ qml interface did not work correctly (ony sometimes).
Revert the previous commit.
Signed-off-by: Jan Iversen <jani@apache.org>
Kirigami appears to have a bug that makes it fail to show our icon.
With this we can be much more flexible in what we show in the top area
of the global drawer.
Fixes#1331
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit b8eb348f moved credentialStatus but missed one spot.
When starting from a fresh install, clicking "No cloud mode” fails because of this.
Signed-off-by: Murillo Bernardes <mfbernardes@gmail.com>
Looks like commit 807571a588 ("core: update deviceData default from
qml") never actually was tested with dive computer download. This looks
rather like an automatic renaming gone wrong.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
add settings variables/functions to qmlprefs
remove settings variables/functions from qmlmanager
change manager. to prefs. in qml files for setting variables/functions
Signed-off-by: Jan Iversen <jani@apache.org>
Set index of comboboxes in Download screen when the page
becomes visible instead of when it is created.
The pages is created before QBluetoothDeviceDiscoveryAgent on iOS and desktop,
therefore combobox indexes cannot be set during page creation.
Signed-off-by: Jan Iversen <jani@apache.org>
Dive list: on holding an item, the delete button
was not showing the icon.
Show GPS fixes: when swiping an item icons were
not being shown.
Partial for bug #1267
Signed-off-by: Murillo Bernardes <mfbernardes@gmail.com>
Adjust size of image and text to ensure that
the clipboard buttom is (nearly) always visible
The buttom is not directly visible in landscape
mode on a small device.
Signed-off-by: Jan Iversen <jani@apache.org>
Users need a simple way to report download problems. Asking them
to go into settings, activate logging, and repeat the download
is too much.
libdivecomputer.log will always be generated, but overwritten, with every
download, so the latest log is ready.
The download is very slow due to BT, so there are no impact of having the log
active, neither in terms of size (a concern on small mobiles) or write time.
Signed-off-by: Jan Iversen <jani@apache.org>
When downloading with bluetooth, changing connection did not work.
The new selection was not passed to the download thread.
Fixes#1274
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
on iOS it is practically impossible to copy the App log
to e.g. a mail! in iOS 11 the log file is stored within
the subsurface container and you first need to copy (actually
using the clipboard) out from there to the "normal" document
shared space, before it can be used.
At least iOS users (and I believe Android users) are not really
used to work with files, so the process is not easy to document
in an understandable way.
The alternative is to provide a button, which simply puts the
log on the general clipboard, allowing it to be pasted in a
multitud of applications.
Signed-off-by: Jan Iversen <jani@apache.org>
Icons used directly by Kirigami use /org/kde/kirigami
as prefix. Ex: previous and next icons on header.
Signed-off-by: Murillo Bernardes <mfbernardes@gmail.com>
Icons used directly by Kirigami use /org/kde/kirigami
as prefix. Ex: previous button on the GlobalDrawer.
Signed-off-by: Murillo Bernardes <mfbernardes@gmail.com>
We had turned this off since it caused rendering issues, but that
appears to be fixed now - and it should help to get us smoother
rendering of the dive list.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And maybe this will make it faster as well? Depends on how the binding
is implemented, I guess.
But at least it's less confusing to read now.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way the menu items describe what happens when you tap on that menu
item. That seems more consistent and intuitive.
See #1204
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In older versions of Kirigami this caused all kinds of problems so we
eventually gave up on it in commit 13c49276d1 (Revert "QML UI: make
dive list fold dive trips").
Now this seems to work much better, so let's bring back trip folding!
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of showing the map zoomed over London by default,
initialize the center at [0,0] and show the whole globe.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
centerOnLocationHard() is added in MapPage.qml so that
on `firstRun` the map is hard panned to the desired location
without animation.
This affects the selection of a new "Dive details" -> "Map it" or
when opening a GPS location in the map.
The idea behind this change is to avoid starting the map animation
from an arbitrary location such as [0,0] or London. Also, to not
start the map zoomed out completely and then zoom in on a selected
dive.
For this change to work, add the helper getCoordinatesForUUID()
to qmlmapwidgethelper.cpp/.h and use it to obtain the
QGeoCoordinates for a dive site UUID.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The background color in our own checkbox should match the page background.
Also includes some whitespace cleanup.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
In the initial move to comboboxes the correct location model
was not used. This uses the correct model and makes it behave
like the other comboboxes.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
When a dive has multiple buddies, pick the index of the first
to prevent the user from hanving to scroll through the entire
list when editing.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Removing the comparison of currentText vs editText when saving buddies
fixes the issue of data loss when dive has more than one buddy.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
The HintsTextEdit just doesn't feel natural and intuitive.
Edit, fixed rebase issues.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
When the slot pageStack.onCurrentItemChanged() is reached
make sure that the stackView becomes non-interactive.
This prevents swiping left on the map to "go back".
Also, always reload the map markers when the map becomes visible.
This is not optimal and instead something in the lines of:
DiveList.model.onChanged()
is a much better solution.
Ideally the map reload should happen on dive removal, dive addition,
dive edits and sync from cloud.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
showMap() uses a location to open Google Maps in a browser.
Make showMap() a generic function to push the mapPage on the view
stack.
Update the calls to this function from child widgets and pages.
Also either call mapPage.centerOnLocation()
or mapPage.centerOnDiveSiteUUID() depending if the caller
wants the map to center on a dive site or on map coordinates.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The Page object has the following functionality:
- reloadMap(): reload all map markers.
- centerOnDiveSiteUUID(): center the map on a dive site uuid.
- centerOnLocation(): the map on a latitude, longitude in decimal.
- Select a dive list entry based on a marker selected on the map via
diveList.setCurrentDiveListIndex()
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Add the setCurrentDiveListIndex() wrapper for:
diveListView.currentIndex = idx
wich also makes it possible to disable the scroll animation when
selecting dive list indexes which are too far apart.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Also a developer likes to see a nicely formatted page, so correct
some bugs in margin handling on the log page. There was a strange
multi-line whitespace on the top of the list, and the total width
of the page was (initially) a little smaller than full page, so
showing a small strip of the page left on the pageStack. This
just looks weird. So again, cosmetics only.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
See also 15cdcdbc6. There, we introduced the wideScreen (set to true)
to evade a (cosmetic) bug in (most likely) Kirigami. The top dive
was partially obscured on the start of the app. And by setting the
wideScreen to true, the application header became of a fixed height.
Numerous changes further in Kirigami, we can now set this property to
false. This results in a correctly displayed divelist at the start of
the app, and *also* an application header that correcly hides itself
when scrolling up, and displays itself again when scrolling down. So,
a behavior that is common to, for example, mobile brouwsers.
This all said. I still believe this is a workround for strange behavior.
In fact, we should not need to set this wideScreen property at all,
and Kirigami should behave correct in all cases (true, false, unset
at our end). It behaves correctly when set to true or false, but
still displays a partially hidden top item in the dive list when
unset.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This worked correctly while compiled against Qt 5.10.0, but after
installing Qt 5.10.1 the behavior was just wrong. And as there
seems no way to color the background of a Kirigami SwipeListItem,
just revert this, and accept the (slightly) inconsistent coloring
of the page (for now).
This reverts commit 6700715b5d.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Trivial and cosmetics only fix. The width of the rescan button
was forgotten, and this pushed the right margin to the right,
causing the combo menus to overflow the right margin.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
And another one. The SwipeListItem also needs to have a set
background color. Unfortunately, the lines between the
individual SwipeListItem disappeared, so, set the
smallest possible border on these items.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Also, this got broken after the Kirigami to verion 2.2 in main.qml.
So, set the header background color according to our theme setting.
Notice, that there is a remaining issue here. We could color the
text color in the header, but now, this seems impossible (or I
do not understand how and where to set this).
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
For some reason, after the update of the main.qml to version 2.2,
all Kirigami Pages and scrollablePages show up plain white.
So now, set a proper background for these pages.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is subtle one. With the changing of the theme color, it
appeared that the hover and selected colors in the divelist
where wrong (as in, always blue-ish). This is easily solved
by setting the activeBackgroundColor to our theme color, and
Kirigami does the rest (tint and opaque settings for the
different states a selected dive can be in).
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is a long standing issue. I wish to keep up with Kirigami developments
including new versions of their controls, but this is not always easy.
While we upgraded to Kirigmi 2.2 for most of our QML earlier, using this
new version of main.qml breaks numerous stuff. In fact, so much that
we just needed to wait.
With the progress in Kirigmi, it is now possible to upgrade, with still
some issues on our side to be fixed, but this is manageble now.
The main show-stopper was a construct to set our theme colors, for example:
Kirigami.Theme.highlightColor = Qt.binding(...)
This is not posssible any more, as the Kirigami.Theme has made these
readonly on their end.
This commit just removes the assignments to the now readonly theme
items. And the setting of a correct theme color for the action button.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Trivial removal of 2 unused Kirigami actions. These were leftovers
from the time we had a very different style of cloud account
management.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Commits fed2c5b6a1 and 572fc4707 erroneously deleted two
aliases. That is corrected here. Yes, QML with only runtime
errors can be a pain.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
See also e6e1473e6. The construction of the locationlist
was not the same as the 3 previous lists, and it needs
the inclusion of a new model file (divelocationmodel.cpp)
in the mobile app. In addition, as the mobile app is mainly
interested in a simple stringList (model) to populate a HintsText
field (or maybe later a combobox), this stringlist is added
to the model, to easy interfacing with QML.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
See e6e1473e6. Exact same commit but here for the
list of divemaster. The careful reader will spot a
small addition to the clearDetailsEdit() QML function.
Two more field are cleared.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is the first of a set of commits that are (very) similar.
It appeared that a number of more or less static lists, which are
constructed by a loop over all dives in the logbook, were executed
when changing focus to a next dive. For example, the in this
commit addressed list of used dive suits.
What was wrong was that the suitList was linked to a dive. There
is only a need to construct the list of used suits when data is
changed (and obviously, once on startup of the app). Further, it
appeared that a lot of code was duplicated and that we can use
(in this case) the same code from the desktop completionmodels.cpp.
Basically, this commit involves the following changes:
- include completionmodels.cpp in mobile and desktop (so move
it from the desktop only category to the generic category).
- remove double code from DiveObjectHelper.cpp
- Do not differentiate in the init phase and the normal refresh
of the list
- the per dive logic is now only the getting of a previously
constructed list (in init or update of the divelist).
There are no visible changes in the UI, other than a better
performance when scrolling over dive details.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is a somewhat hacky commit. For a very long time, the delete
from the divelist on mobile crashed. That is, not always for anyone,
but for me almost consistently. This commit tries to solve it.
I found that trying to save the delete immediately after removing
data from the underlying model seemed to cause the crash. Hacking
around, I found that a simple beginResetModel/endResetModel between
the delete of the underlying model data and actual save is
sufficient to solve the crash.
The big question is, why does this all work? I suspect some of race
condition between deleting model data, and giving the QML engine
the opportunity to do its thing.
This is also related to issue #311, but that is not implemented
here.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The new SHA mysteriously caused more than 300 extra warnings in the
app log. It was caused by a code change in Kirigami. The way to
suppress it is, in hindsight, after some hours of searching, trivial.
A Kirigami.BasicListItem shall have an icon defined. And as we do
not care about any icon here, just define it empty.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This commit consists of the following 3 parts:
1. There are 2 source files added, adapt our build process
accordingly.
2. Due to a change in icon and kirigami QML prefixes, we need to
adapt for this as well. Changed mobile-resources.qrc for that.
When this would not be changed, the icons will not be found.
3. To further prepare for the future, abandon the iconName
property in favour of the new icon grouped property, which
can have more attributes than only the name. But currently
it is only a syntactic change.
Tested on Android device, and no visible changes.
Signedoff-by: Jan Mulder <jlmulder@xs4all.nl
This is mainly a cosmetic improvement. The GPS menu stayed
visible, when selecting most of the options. This looks weird,
as the close of the menu is also an indication of the selected
action carried out. So, just close it
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Navigating using the breadcrumb in the header did leave the
dive detail edit (and add) mode in such a way that (for example)
navigation in the dive list was suspended. Obviously, it is
debatable what should be done. Saving the edits/add, or
cancelling them. For now, this commit cancels them
silently. This is the exact same thing that is happening when
the user selects the dive list from the drawer menu.
Fixes: #932
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
When editing (or adding) a dive, the internal data containing the
attributes on the edit page was not cleared when editing was
finished (in any way, by saving the edit or by cancelling it).
As long as the user only edits existing dives, all this poses
no problem, as at the start of a dive edit, the data is filled
from the dive to be edited. However, when adding a dive, data
coming from previous edits shows up. This not clearing data
also causes the strange effect as written in issue #950: adding
a dive, deleting it, and adding a dive again, added the first
added dive data, without the edit screen being shown.
All this can be solved by clearing the data from the edit when
editing is done.
Fixes: #950
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Trivial fix. Show the message "Turning off automatic
sync to cloud ..." when turning automatic sync to offline. Just
a more logical moment to show this message. Also rephrase the
message "Enable auto sync" to "Auto sync enabled". It shows
a status, and not an action.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Set download srceen in a sane state after a previous download
session using this screen. The erroneous behavior was very
similar to the one fixed in commit 7fe9bbe295dcf92. For example,
download some dives, quit the screen, go back, and the bottom
buttons are still selectable.
This commit resets some values when leaving the download screen
(ie. not only swiping it away), so that it looks sane at a next
visit.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Reset the Retry button on exit of the Download from divecomputer
page. So, it it not reset wehen swiping this page away, or
cancelling a running download, but resetting it on accepting
downloaded dives.
As we do not have real error reporting (from download failures),
this all is a little arbitrary. Another "fix" could be, not
changing the button text at all.
Further notice, this is not specific iOS, but also Android.
Fixes: #895
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
While the autocomplete function only works for the first entry
adding multiple comma separated buddies can still be done.
Fixes#608
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
I consider it more natural for example for the GPS menu
to stay open when an action is clicked. So this turns off
the general close but has to trigger it on individual items.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Otherwise the divecomputer has to be in pairing mode
at app start time.
Unfortunately, this leaves less space for the progress message.
My time/qml knowledge does not suffice to move that to the next line
(when moving that out of the RowLayout it overlaps with
the buttons).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
on iOS the address we display on Connection is an UUID, not
a physical address.
This change the pattern (on iOS) used to enable bluetooth_mode.
Signed-off-by: Murillo Bernardes <mfbernardes@gmail.com>
When the user entered a dive site using autocompletion, it
is a known site, of which we might have a GPS location already.
Just fill the known site coordinates.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Add the capability to select the location name from a list, constructed
from the known dive sites in the logbook.
Fixes: #546
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Upgrade QtQuick to 2.6. Seeing a small artifact in the application
header, lets see what happens when upgrading more includes.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
When first tested this commit, especially the dive list was looking
terrible. However, after including newer SHA's from libkirigami, and
correcting lots of spacing/margin issue, a retest of this commit shows
no strange artifact any more, and the amount of warnings in the log
output is reduced significantly. So now, it appears save to
upgrade.
Notice that main.qml still uses Kirigami 2.0. and is not updated in
this commit. With version 2.2, there is a new way of theming, that
is not (yet) compatible with our current code. Blindly upgrading to
2.2 leads to a almost black dive list, wrong button colors, and
runtime errors in the log, due to the fact the direct setting from
QML Kirigami's Theme colors is not allowed any more.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Move all the map widget platform agnostic files to the
<subsurface-root>/map-widget folder.
This avoids the confusion about the desktop version of subsurface
using mobile components. The map widget is planned as a shared
component between the mobile and desktop versions.
desktop-widgets/mapwidget[.h/.cpp] still remain as those are specific
to the desktop version.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
In commit bdf6dc7828, we pulled in some changes from Kirigami.
I checked all the new commits and they seemed just fine, and a
test (on desktop) on both Qt 5.9.1. and 5.9.2 showed no obvious
problems.
However, some time later, working on something else, I compiled
from Android to test, and saw some strange behavior in the dive
list. The topmost dive is partially hidden behind the application
header on startup of the app, but can be pulled down. Not a big
deal, but is does not look right.
After tedious testing, bisecting, etc, I found commit
d0f3941a4d7f4d4c6 in Kirigami (obviosuly, it was not clear from
the start that it was in Kirigami, as I could well have been
some error in Subsurface, or even Qt). Mentioned commit is
trivial, and handles with the wideScreen property of the
application window. With wideScreen = false, the bug is
visible, when true the bug is gone.
This all said. Just set the wideScreen to true, which can
definitely be considered a workaround. I exspect that this
commit can be reverted later on when Kirigami is fixed.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
While testing the mobile app on Qt 5.9.2, I encounted a show stopping
issue. Select a dive in the dive list, go back to the dive list (as
selecting a dive opens the details), now scroll down to a different
dive, and select one. The app starts enumerating (moved smoothly
according to the specs) all the dives between the old and the new
selected dive. So, depending on the distance, this could take forever.
Explicitly: on 5.9.2. only.
From the Qt docs:
highlightFollowsCurrentItem : bool
If this property is true (the default value), the highlight is moved
smoothly to follow the current item. Otherwise, the highlight is not
moved by the view, and any movement must be implemented by the highlight.
End Qt docs.
Setting this property to false solves the issue. Tested on both Qt 5.9.1
and 5.9.2.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The 'isReady' boolean flag is now set to 'true' only
once the Component.onCompleted slot is reached.
The flag is then used as a safe-guard in the
onZoomLevelChanged slot. Calculate the small circle radius
(mapHelper.calculateSmallCircleRadius()) only if 'isReady'
is set to true.
Prevents a crash if the Map widget is not ready, yet a zoom
level is set via the 'zoomLevel' property. The crash happens
because mapHelper.calculateSmallCircleRadius() has a callback
to the Map component to estimate some points and distances of the
small circle.
Reported-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Commit 344d976593 resulted in the start of Subsurface with a map of
the whole world. The user has to zoom in (assuming the case that the
first selected dive has a position), in evenry session. This is solved
by setting the zoomlevel at startup at the default value. Ok, this
results in a map of central London, UK, when starting Subsurface with
a dive without location, but is this as good as any map.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
A not perfect improvement, but way better IMHO. Prevent the list of
downloaded dives to grow over the buttons at the bottom. Just a simple
change by adding a bottomMargin to the list.
Notice that there is still some overlap, but for now I consider this a
trade-off between the scarce screen real-estate and the wish to present
and much as possible dowloaded dives.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Trip headers spanning more than one line where broken at incorrect
locations in the string. Not exactly sure, but I think this came with
the newest Kirigami SHA, and especially the Label change.
Carefully reading the code for the trip heading shows a "strange"
negative margin. So the margin is on the outside. This margin was
used to split the string, allowing for a small invisible part of
the string to present as trip header.
This is solved by this commit.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This does two main things to the map widget:
- if there are no coordinates, do *not* zoom out to the whole-world
view. Just leave the map alone.
- when zooming out to move to a new dive site, zoom back in to the same
zoom level it was before.
These two changes make it much more pleasant to move between dives,
particularly as you move back-and-forth without losing the zoom level.
NOTE! The zoom level gets reset if you move dives _while_ zooming is
happening, and so moving quickly between dives will still end up losing
the original zoom level, replacing it with a bigger zoom-out that was
active _during_ a previous zoom.
That could be seen as a feature (moving incrementally to an "overview"
zoom when moving quickly between dive sites), but honestly it smells
more like a bug to me. But regardless of that feature/bug, this new
zoom behavior is more pleasant than our older "always reset when
moving".
But it might be a matter of taste, so people should try this out and
comment.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation,org>
Cc: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Again, mostly related to label change. First, the top button was "glued"
to the top of the screen, so added a little margin there. It
appeared that all the other items on the screen (progressbar,
2 button rows, and the downloaded dive list) where not moving down
due to the add of that little top margin. This was solved by
anchor-ing the items together. Finally, the text of a downloaded
dive was on the top of the delegate lines. Not sure where that came
from, but easily solved by centering it explicitly.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
As in a525fff112, also the dive details top data was not nicely positioned
any more due to the deprecated and removed Kirigami.Label.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The new SHA for Kirigami did all kinds of nasty things to our DiveList.
This commit tries to repair most of the damage. Nothing more than
some margins, anchors, and even a font that changed.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Commit 8f6827ab12 brought a new SHA for Kirigami, but that introduces
a very noisy logging of "Kirigami.Label is deprecated. Use
QtQuickControls2.Label instead".
So, thats what done here.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Before this change, there was only one way to create the local
no cloud repo on the device. The user needed to add at least
one dive to the no cloud account (so that there is something
to save). While this worked in some scenarios, it could also
get things in an inconsistent state: credential status = CS_NOCLOUD
but no local repo. This was a dead end.
In this commit, the creation of the no cloud repo is made more
explicit. When asking for no cloud mode, just create an (empty)
repo for it when it does not yet exist, and otherwise, just
open the existing (possibly empty) repo.
Now, a user can have no cloud repo, next to (any number of)
cloud accounts.
This leaves one functional aspect left: how does a user abandon
the no cloud repo, by merging his data into a true cloud
account. This is code for this, that tries to do this merge in
a smart way. This seems to be broken (too). To be clear: this
is no part of this commit.
Fixes: #667
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
It can be difficult to distinguish the new marker
which is added on the map and has to be dragged
when editing a new dive location.
By adding a new grayed-out marker it becomes
possible to gray out all other markers, while
the current marker which is being edited is still
bright red.
Suggested-by: Dietrich Meyer <dietrich@sunnynames.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The QML map uses MapItemView. MapItemView needs a delagate
in the form of a MapQuickItem. The MapQuickItem needs a
'sourceItem' which would be used as the visual (e.g. marker)
on the map.
If the root sourceItem is of type Item, the marker becomes
non-clickable. If the root sourceItem is an Image, the clicks
work.
This patch removes the root Item, which makes the code
less organized, but at the same time it fixes the bug.
Bug reproduced on the following Qt versions on Ubuntu:
5.5.x, 5.7.x
Bug cannot be reproduced on Qt 5.9.x on Windows.
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This commit implements possible switching BT on and off during a session,
so not needing a restart of the app when the user forgot to switch
it on when starting the app.
For this, the following needed to be done: 1) create a handler that
reacts on local BT device status changes. 2) repopulate the connection
list in the download screen when a BT status change is detected.
Notice the subtile change of the Q_INVOKABLE btEnabled() function
to a Q_PROPERTY. This gives a nice dynamic behaviour when
switching BT on/off with the app open.
Fixes: #556
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
If the QML modules for QtLocation and QtPositioning are
missing the QML in mapwidget.cpp will fail to load,
which can lead to crashes.
To solve the issue check if the QML has loaded and set
a flag 'isReady' to true. If the loading has failed
load another QML which is for showing a red error text
in the lines of `MapWidget.qml failed to load!`.
If the map QML has failed, use a macro in all relevant
MapWidget members to turn them into a NOP. This approach
leaves the rest of the codebase intact - e.g. no checks
in classes which connect to the MapWidget class.
Fixes#596
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This commit is empty when shown with '-w' - it just updates the
indentation after commit c00804eff6 ("QML UI: always start edit at top
of page").
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When starting to edit / add a dive, the Flickable needs to be positioned
at the top of the page, not the last position shown.
For clarity I'll do the re-indentation in the next commit.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The hard switch was not ideal. This isn't perfect, yet, but a step in
the right direction. The 'transitions' to change the visibility
properties are a bit odd, but that's how it's done in the examples as
well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need a white path drawn on the dark action button, but a black path
drawn for the main menu.
(looks like a white space change snuck in here)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This addresses some review comment on whitespace and translated
string formatting.
In the string formatting, a tiny additional change is made.
I wanted the email address in the explanation text in a bold
font. Using the HTML <b> for this, removed the /n newline
characters in the output. Apparantly, mixing these two
formatting styles does not work. No problem, replaced the
/n to HTML style too.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This commit tries to implement most of issue #515. It reworks the
one credential page, which its dynamic PIN part, into two pages.
Main driver of selecting one of the two pages is the showPin
boolean. Page 1 contains the email/passwd field (and the
option to use a no cloud setup). Page 2 only contains the PIN
part (and the option to cancel the process).
The Kirigami central button does not seem very handy here. We
need, for example, a cancel, sign-in and register, only register,
etc. buttons, which are not easy to handle in specific icons.
Therefore, normal pushbuttons are chosen to deal with user
interaction, and the Kirigami button is removed from these
pages.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Previously, we could edit the cloud credentials in basically two
places. At startup of the app from a fresh install (and no previous
data on the device), and from the settings. Issue #515 proposes
only one way.
However, we need a way to access the new credential UI pages, so
that the pages at a fresh install of the app can be reused,
for example for account switching.
This commit replaces the settings cloud credentials block by
a simple (not editable) display of the current credentials, and
a button to access the initial pages, for all management tasks
on the credentials.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
It appears that the onCompleted of the StartPage item is triggered
before the onCompleted of the rootItem. This is logical as the
Startpage is a child of the rootItem. And, yes, this does matter.
As the divelist also contains the logic for initial cloud
registration (and is the default page shown in a state where
the cloud credentials are valid (CS_VERIFIED state)), we need to
know the correct credential state at start of the app.
The move of this one line of code makes sure of that, in addition
to setting the credential state from the preferences. Now, the
setupActions function can reference correct credential data.
This is further preparation for a better cloud creation
process from mobile.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Following on beb0d5703a, the context menu seems to work fine
with a much older QtQuick import - version 2.0.
The 2.7 import is technically a development leftover
and a minimal version should have been considered earlier.
On older Qt setups (e.g. 5.5.x) this might throw a:
'module "QtQuick" version 2.6 is not installed'
Reported-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Having two different enums around with more or less the same
definition has lead to unclear code. After removing two not needed
states on the mobile end, the remaining step to one enum for the
credential state becomes almost is simple rename operation.
Unfortunately, I do not know a way to embed a plain C enum
from pref.h into the QMLManager object. So after this, there
are still 2 enums around, but now identical.
This commit is not changing any functionality.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is a no-brainer removal of the VALID_EMAIL state used in QMLManager.
All current usage of this state is "if state is VALID or VALID_EMAIL",
so there is no distinction between the two states.
It is even a little different. The comment suggests "when we can open
a local cloud storage, tied to a cloud account (so explicitly not
the no-cloud status), we have at least a valid email". While this
is formally true, this implies that there is also a cloud account
on the cloud server (ie. the cloud account is in a VERIFIED state).
In other words: currently, there can't exist a valid local storage
that is tied to a valid email adress, without valid cloud account
on the server.
Notice that this touches the discussion on GitHub for commit
e76f527fe5 (pull request #520). Can we implement the creation
of a valid cloud account without data link to the cloud server?
Currently, we need the server to confirm the email address (for
example for uniqueness reasons on server side). Obviously, we could
hack our way out of this, but we have a perfect solution already
in place. Create a no-cloud account, and transfer that later to
a true and valid cloud account.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The googlemaps plugin is about to support tile language
via the PluginParameter 'googlemaps.maps.language'.
To be able to pass the subsurface UI language (obtained
from the uiLanguage() helper) the Plugin has to be created
dynamically, only *after* the MapWidgetHelper is created.
MapWidgetHelper::pluginObject() now provides a QString which
contains the Plugin object and also include the uiLanguage
ISO value.
This string is used in mapwidget.qml as:
map.plugin = Qt.createQmlObject(pluginObject, rootItem)
This creates the Plugin object dynamically with the proper
UI language string, but also requires a couple of small changes:
- move the declaration of map.mapType after the
Qt.createQmlObject() call
- assign map.activeMapType after map.mapType has a value
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The QML Map has a couple of methods - toCoordinate(someQPointF) and
fromCoordinate(someQGeoCoordinate). Ideally, if one passes a point to
toCoordinate() and then attempts to convert the resulted coordinates
back to the point, the same point in the Map view port with minimal error
should be retrieved. That's not always the case - e.g. near
47.400200 -123.142066, which means that the methods are not exactly
*reliable* and there might be Map class bugs at hand.
The new zoom-in and zoom-out improvements try to work around the above:
- for both centerOnRectangle() and centerOnCoordinate(), if no good
zoom-out level is found (newZoomOut), the zoom-out is set to the default
value of defaultZoomOut. In practice, this prevents the case where the map
does not zoom-out at all when going from one place to another
- centerOnRectangle() now uses rectangle diagonals to estimate a fit,
instead of checking if 2 points (top-left and bottom-right) are visible
in the viewport. The usage of fromCoordinate() was giving bad results
in this case and comparing distances (diagonals) is more reliable
but more expensive on the CPU.
Due to the inconsistencies of toCoordinate() and fromCoordinate()
the dynamic zoom-in and zoom-out are still not ideal, but the current
implementation is somewhat usable with decent accuracy.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This appears to fix the mystery crashes that can occur when deleting a dive
from the dive list.
Fixes: #497
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
This gets rid of TypeError messages, but does not appear to affect behaviour
qrc:///qml/DiveDetailsEdit.qml:254: TypeError: Cannot read property 'dive' of null
qrc:///qml/DiveDetailsEdit.qml:228: TypeError: Cannot read property 'dive' of null
qrc:///qml/DiveDetailsEdit.qml:216: TypeError: Cannot read property 'dive' of null
qrc:///qml/DiveDetailsEdit.qml:204: TypeError: Cannot read property 'dive' of null
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
MapWidgetContextMenu now has a new action (SELECT_VISIBLE_LOCATIONS),
that will invoke the MapWidgetHelper method selectVisibleLocations().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
First, this function calculates the zoom out effect until both the
current Map center and the target rectangle are visible - see the
"calculate zoom out" part.
Then it calculates a zoom level, so that the target rectangle
fits the viewport, but also so that the zoom is not too much (clamped).
see the "calculate zoom in" part.
NOTE: "centerStored" (the variable used to store the current map center)
is created using QtPositioning.coordinate(), because the code needs a new
object and not a reference of the map.center QGeoCoordinate object.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Add stopZoomAnimations(), which is really just a precaution
function to make sure we have stopped all animation of the
map before doing calculations! Since the animation *should*
be running in a separate thread, this would make sure the Map "center"
and "zoomLevel" properties do not change.
Add pointIsVisible(), which is a helper to determine
if a point created by map.fromCoordinate() method is inside
the viewport. fromCoordinate() has to be called without the
"false" (clip) flag for this to work.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
MapWidgetHelper::centerOnDiveSite() now checks if more than
one dive sites are selected and finds the most top-left and
bottom-right ones in the coordinate system to form
a rectangle.
It also supports the special cases where a selected dive site
does not have coordinates or the case where only a single dive site
with GPS coordinates are selected.
TODO: implement mapwidget.qml::centerOnRectangle()
This QML function will receive a QGeoCoordinate based rectangle which
has to be centered in the viewport with animation.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
For instance, if the 'googlemaps' geoservices plugin is missing
a new message is now shown:
"qml: MapWidget.qml: cannot find a plugin with the name 'googlemaps'"
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Do so until the following issue is resolved:
https://github.com/vladest/googlemaps/issues/9
With the satellite map ([1]), the black tiles at relatively high
zoom levels over the Red Sea cannot be seen. Instead it shows white
tiles at the ultra-maximum zoom level at places.
As a side note, the "satellite" map does not have the country labels
which the "hybrid" map has.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
No idea why this was restricted to be so narrow. Also, making
the font of the label smaller and lighter seems visually more
pleasing.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes sure that the autocompleting comboboxes never displays the scroll list where the user can pick an entry, and as such forces the view of a autocompleting textfield from the users point of view. The reasoning is that when scrolling in the drop down list it it possible to scroll to far and thus abort the ongoing edit by flicking away the edit page.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Mobile devices hare rather limited when it comes to screen size,
there is no point in reducing the availabel space more than neccecary.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
This handles a cornercase where a user starts editing and then cances the divedit followed by a return to edit mode. The previously acive textfield would then be active again even though all changes are lost.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
For some reason the textfields on dive edit page did not loose focus when editing ended by press on the return key.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
When the user makes a selection using the autocomplete function while editing a dive the keyboard should close and the selection list should disappear.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Add star icons from the material repository.
https://material.io/icons/
The icons are under Apache License Version 2.0
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
This patch makes use of the geolocation plugin "googlemaps"
for Qt Location with source code from here:
https://github.com/vladest/googlemaps
The change from the ESRI plugin is that it requires new indexes
for the Hybrid ([3]) and Street ([0]) map types.
There are more zoom levels in this plugins, but our default zoom-in
settings seem to transition well to it.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The C++ side for the desktop version already does that. Add a slot
for that in QML, for later use in the mobile version.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The editing support is added via dragging. It is handled via the
MouseArea's drag.target of the MapQuickItem. The drag target changes
with the model selectedUuid.
"mapAnimationZoomIn" now also does an initial zoom-out before moving
to a new location.
centerOnCoordinate() now pefroms calculations to determine how much
the animation needs to zoom out. What it does is it reduces the Map
zoomLevel util both the current and the new target coordinates are visible.
It then restores the zoomLevel and performs animation based on newZoomOut.
animateMapZoomIn() is now obsolete.
The patch also includes the following smaller changes:
- remove the setSelectedUuid() call in deselectMapLocation()
This is now handled in C++
- sets "defaultZoomIn" to 12.0
- use ">=" when determining if a mapItem text should be visible
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The MapWidgetHelper QML instance now has the slot onEditModeChanged()
which toggles the visiblity of a newly added message box that
notifies the user if editing mode is enabled.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Call setSelectedUuid() from C++ also center on coodinates instead
on a MapLocation, as there is no point to pass the MapLocation object
back to QML.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The MapItemView delegate now includes a white Text element.
It uses the MapLocation "name" property as text.
This text is only visible if the map zoom is above "textVisibleZoom".
For hundreds of dives, using the DropShadow effect for the text
makes it laggy. Instead, using a fake drop shadow (duplicate black
Text under the default text) makes it much better.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The buttons are positioned bellow the "toggle map type" button
and increment / decrement the zoom by "zoomStep" (2 for now).
Also clamp the zoom-in level to "map.maximumZoomLevel".
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Double clicking a marker or the newly added MouseArea now performs
a +2 zoom-in over a period of 500ms and centers on that clicked
coordinate.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Different actions might be performed depending on the count of selected
dives - e.g. deep zoom only for a single selected dive.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The signal emits a QList<int> filled with dive idexes from the
main backend dive table.
The MapWidgetHelper QML instance handles that in onSelectedDivesChanged().
This will only be needed for the mobile version, as the desktop version
should connect it's own slot in MapWidget.cpp.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The idea of this flag is to be able to only to emit the
selectedLocationChanged() signal when the user clicked on the map
(fromClick == true).
MapWidgetHelper::selectedLocationChanged() listens for this signal
and only then it will select nearby dives based on a "small-cicle".
If "fromClick" is false, it's the backend or the dive list that
updated the selection and MapWidgetHelper::selectedLocationChanged()
should no be called.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Each time the zoom changes MapWidgetHelper::calculateSmallCircleRadius()
is called, and the "small circle" radius is stored in both C++ and QML.
On the C++ side this radius will be used to select multiple nearby
dives.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
openLocationInGoogleMaps() now can be used to open a URL in an
external browser, triggered by the context menu. Use the same
Google Maps URL formating as in main.qml showMap().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The actionSelected() signal is now dispatched when the user selects
an action from the menu (see the "actions" object). Then the declaration
of the MapWidgetContextMenu object in mapwidget.qml can catch that
signal in the onActionSelected() slot and obtain the action via
switch() branching.
The actions enumeration is kept in QML for now, with the idea that
specific C++ methods from the mapwidgethelper class will be called
directly (if marked as Q_INVOCABLE), instead of a generic
onMapAction(action) C++ method in the helper. But if the actions
are possible from QML (like copying to clipboard) and are also
small and non-expensive, it might be better to keep them
in mapwidget.qml.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
- move the readonly properties near the top of the root Item
- move the rest of the properties bellow the readonly properties
- make the ListView Timer as a child of the ListView
- slight rename of the timer ID
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
NOTES:
- the ListView object uses lsitItemDelagate to display all elements from
the model listModel
- onCountChanged() is used to adjust the x position based on the
maxItemWidth property which is calculated when the items are populated
with text
- onVisibleChanged() is used to deselect the last selected item by
calling listModel.selectedIdx = -1
- onOpacityChanged() i sued to make sure that the View is hidden if the
opacity becomes 0.0
- inside the View there is a MouseAre which obtains the selected item via
indexAt(x,y)
- there is a Timer with id listViewVisibleTimer, which is called each
time the user selects an item from the list and the timer performs a
"delayed hide"
- a couple of State and a Transition objects are used to preform smooth
fade-in / out animation when the ListView is hidden or becomes visible
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This property would act like a state flag. If -1 (default) no QML State
animation will be pefromed, otherwise the ListView will either fade in
(1), or fade out (0) when the user clicks the context menu button
(Image) or selects an item from the list.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The ListView delegate is a simple Component with a parent Rectangle.
It contains a text field with the ListView action.
This patch also defines some properties for the delegate animations
and looks. The property maxItemWidth tracks the width of all item
text, and makes the width of all items be of that value.
The above prevents potential issues when a fixed width item is used
and some translated language string cannot be fit inside of it.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Menu item indexes are enumerated in the object menuItemIndex, while
menuItemData, holds an array of objects which will define the number
of items, with indexes (idx) and text (itemText).
When the ListModel is created, it's dynamically populated from
from menuItemData.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The anchor of the menu itself will be positioned near the edge of the
map widget, while the menu contents will have negative coordinates.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This QML component will be used to provide a context menu for the
QML map widget. Include the file in QRC and test it's creation
in MapWidget.qml.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Make the "enumeration" local to the Map object for now.
This will possibly break if another plugin is used in place of the
ESRI plugin, but it will simplify the map toggle button which is about
to be implemented next.
If support for multiple plugins is added on runtime a simple
helper function will be needed that will check the current plugin "name".
And return the appropriate supportedMapTypes[X] for e.g. STREET of that
plugin.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The QML based map will have a toggle in the top left corner to toggle
between the satellite and steet tiles.
The images are created specifically for use in this Qt Location widget
and are free for use in Subsurface.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The animation sequence when deselecting a zoomed in map location, should
be:
- zoom out completely
- pan to center
To achieve that a new animation object is created - "mapAnimationZoomOut"
The previous zoom in animation is renamed to "mapAnimationZoomIn".
The map functions centerOnMapLocation() and deselectMapLocation()
now call the helper functions animateMapZoomIn() and animateMapZoomOut().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
It's best to only animate the flags when clicked, thus play the animation
in the onClicked() slot from the MouseArea.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
To be used to center the map on a dive location or reset the map
if a dive from the dive list doesn't have GPS coordinates.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
When centering on a map location, use the predefined zoom
map.defaultZoomIn.
Later the map should be able to center on (0, 0) and zoom-out
if a dive doesn't have GPS data.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The rest of the QML code in subsurface doesn't use the ';' to
end a line of code or a declaration. Remove all the redundant ';'.
Also clean extra blank lines.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
If a marker is clicked it's source image changes, which will
call the onSourceChanged() slot. If a marker is selected
play the newly added sourceItemAnimation which is a short scale
animation for the image.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
These properties will be used when zooming-in on a map location
or when zooming out if no map location is selected.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The function in QML centerOnCoordinate() is now renamed
centerOnMapLocation() and accepts a MapLocation object, so that
a marker is selected (based on UUID).
In MapWidgetHelper::centerOnDiveSite(), the pointer to a MapLocation
is retrieved via MapLocationModel::getMapLocationForUuid(). Added in the
previous commit.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Add a MouseArea to the MapItemView delagate and onClick set
the "mapHelper.model.selectedUuid" to the uuid of the clicked marker.
This updates the "selectedUuid" property inside MapLocationModel.
Based on "mapHelper.model.selectedUuid" it is now possible to
show two seprate images for selected / deselected markers.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The image for the unselected marker is now a slightly darker flag.
Same behaviour as the current Marble implementation.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Rename the QML function "centerOnCoordinates" to "centerOnCoordinate"
and pass a QGeoCoordinate to it in ::centerOnDiveSite().
This will prevent the creation of a QGeoCoordinate object on the
QML side and instead it will be created in C++.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Instead of maintaining a seperate latitude/longitude values
in C++ and passing them to QML separatelly, pass them as a QGeoCoordinate.
This reduces the number of model "roles" and also prevents the creations
of extra objects in QML (e.g. via QtPositioning.coordinate(..)).
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
MapItemView is the QML class that handles the "create map markers based
on a model". In this case the model is created as part of the
MapWidgetHelper, so here passing "mapHelper.model" to the "model"
property is enough.
The delegate receives coordinates from the model as "model.latitude",
"model.logitude" and converts them to QGeoCoordinate.
The "sourceItem" image for the delagete is just an image ATM and is
fetched from QRC.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
When calling centerOnCoordinates() the map will now animate over a
period of 3 seconds the zoom level and over 2 seconds the center
of the map.
Can be tweaked and improved later on.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This function can be called to center the map on a specific coordinates.
For the C++ version call it via QMetaObject::invokeMethod() in
centerOnDiveSite().
TODO: add QML property animations.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The idea here is that the Map object can be controlled from C++ via
the "m_map" private member. Also, for the mobile version, QML code can
call the same C++ methods (if marked as Q_INVOCABLE).
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This instance in the QML code itself will be accessed by both the
mobile and desktop version. That way, the map code between
the two Subsurface versions will be shared.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Add a local "enumeration" (object) for the two possibly map types
of interest: SATELLITE and STREET.
Use SATELLITE by default.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The root element is now an Item and also doesn't have explicit
anchors and dimensions as these will be handled by the parent:
- on desktop: a QQuickWidget
- on mobile: any QML based QQuickItem
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Like the subject says. We do not want the password to be made
visible, so a switch to show it, is useless and is therefore
removed. Futher, the entry mode is set to PasswordEchoOnEdit,
which causes the passwd to be visible (for easy entry), but
can't be made visible again after save/end edit.
Fixes: #512
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Kirigami prevents us from altering the color of the gps icon in the action menu. So let's display an gps fix icon in the lower left corner of the drawer when the location services is running, colored to match the themes primary accent color.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Not the lsit is much more compact and shows a lot more dives even on
smaller screens. And it's similar in style to the dive list.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace the theme checkboxes on the settings page
so that we get a unified UI.
These switches are linked and as such can only be activated
deactivation occurs when the user selects another theme.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Move the location services switch to the GPS menu, indicate both with icon and text if the service is active or not.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Strangely, a click/tap anywhere else worked as expected, but if you hit
exactly on the checkbox, the status change wasn't propagated.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In stead of using the fixed 4 column code introduced in f2fcad89b0db9b164d8fd3f89218ad27ca362bd3 use percentages of page width to allow for a more flexible layout since no block really has 4 columns.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Automatically save changes made on the settings page on completion of text fields or theme checkboxes.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Put all GPS settings in one block and revert to a 2 column layout while maintaing the 4 column widh.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Addresses: #492
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Had a bit of rebase issue with this one.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
New icons for the dive management sub-menu
ttps://material.io/icons/
The icons are under Apache License Version 2.0
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Add a couple of icons from the material repository.
https://material.io/icons/
The icons are under Apache License Version 2.0
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Add a checkbox to the preferences page to facilitate selective visibility of the developer menu. With the coresponding function in qmlmanager.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Fixes: #490 items 1) and 2).
1) Reference to isBluetooth.leftPadding is removed as the isBooltooth
checkbox is gone.
2) Do not set background color of downloaded dives. The checkbox is used
to denote "selected or not".
In addition, incorrect references to subsurfaceTheme.PrimaryColor (which
does not exist) are replaced by the correct subsurfaceTheme.primaryColor.
Finally, an obvious copy/paste error width: childrenRect.height. that
is supposed to be width: childrenRect.width.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This commit adds the capability to cancel a running download from DC.
The actual cancel is fully handled in the underlying libdivecomputer
code. As the user may be interested in the dives downloaded up to
the moment of cancel, do not just close the download screen (as
it was before this commit). Now, the <quit> button changes to
<cancel> when the download is started, and pressing cancel, only
cancels the download and does not close the download screen, but
presents the so far downloaded data. When no download is running,
the <quit> button just quits the screen as before.
Fixes: #485
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The connection already clearly defines whether this is Bluetooth or not.
No reason for the separate checkbox.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I wonder if we even need this anymore at all as the connection
clearly determines whether this is a BT download or not.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we can't find a match, just leave it unchanged. This way, if we
mis-recognize a device, the user can correct the product (or even
vendor) without losing the correct connection.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add styling to the GPS fixes page.
The background color of the swipe list objects is wrong and also the icon overlay. This is a Kirigami issue.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
The built in theme in Kirigami has special variables for sertain objects, this sets the correct color for each object to match our themes.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
THe editable textboxes rely on the material theme to set the correct colors. This sets the appropriate colors for each theme.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
This hides the text for the map it button if ther are no coordinates for a dive. Needed as for the dark theme the map it text was still visible.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
This adds the right handle icon that is needed for the swipe list items not to report an error when activated.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Right now we need to restart Subsurface-mobile in order to detect
Bluetooth devices - so simply turning on BT after Subsurface-mobile was
started is not sufficient.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit only has the actual changes, the next commit will clean up
the white space in order to make it more obvious what was done.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These buttons only work when we successfully downloaded a dive. Also, don't
show a list of dives when there are no dives.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Latest Kirigami master allows us to turn off reachability mode. In
general this had been rather confusing to our users and it seems to
somewhat conflict with the pull down to refresh of the dive list.
Latest Kirigami also changes the behavior of refresh slightly, you now
need to pull "down" for at least 500ms before it triggers. So, with this
change and the latest Kirigami, hopefully the user experience for
refresh is good enough that we can consider keeping it enabled and use
it as an equivalent to manual sync (even in offline mode).
See #454
See #456
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fast flicking to the top of the divelist triggers almost certainly a
pull down sync, as the default boundBehavior is DragAndOvershootBounds.
Despite being the default QML action, this leads to unwanted pull
down syncs (even in offline mode).
Setting the boundBehavior to DragOverBounds solves this issue. Now,
the user has to explicitly drag the top down to force a pull down
sync, and a accidental fast flick is stopped at the upper bound.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Now that we support this for many dive computers, that seem reasonable.
I'm not happy with the icon, but couldn't figure out a better one in the
breeze icon set.
See #426
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For now just do an indeterminate busy indicator - we can get more fancy
and use the libdivecomputer progress event, later.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Restyle construction of toast message and enable translation for it.
Further, removed newline characters as they break the lines at
non-logical positions.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Let's have names for the colors in each theme and assign those
named values to the theme colors when switching themes. This
way other pages can access the colors that are not in the current
theme (for example for a theme switcher).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code is based on code from Marco Martin from the Kirigami Android
sample app. In order to simplify the QML code the QMLManager function is
there for all OSs, but it's a no-op on anything but Android.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way the user can scroll up the page to see all of the notes without
having them covered by the action button.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Occasionally I see errors in the log where we would access modelData.dive
with modelData = null. This patch addresses a couple of the spaces where
this happens, but also simplifies the code by using the existing alias.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This isn't great, yet, but a first step to show that this is possible
(and in doing so I found quite a few spots where the colors weren't
correctly propagating, yet).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
By making the assignments to the Kirigami Theme colors Qt bindings
things get correctly updated when switching.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now that we have distinct colors for trip header and selected dive, this
is actually counter productive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make the accent color much lighter, don't have a solid bar on the left
for dives that are part of a trip.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Implementing another suggestion from Davide. A button to get the map
(as well as just tapping on the location name).
Fixes#431
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove the grid layout and replace it with code that is derived from the delegate
that we use in the dive list. In order to look proportional I ended up using a
larger font for the location and therefore decided to allow that text to wrap
instead of forcing single line.
This implements a good chunk of another one of Davide's great
suggestions.
See #431
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This removes fairly redundant text (yes, we know those are the Dive Details) and
makes the label for the Notes consistent with all the other labels.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Davide points out that this is not a commonly understood way in an app
to indicate that a text is also a link. So let's just remove that (but
tapping on the location will still work to get you to the map if there
is GPS information available).
See #431
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This shows that we are, indeed, using Roboto on Android. Which means I
can close the first of Davide's design issues:
Fixes#427
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order to make it easier to see the changes, the code hasn't been re-indented.
This will be in the next commit.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way it will render in the same font as the location of a dive.
This will look like crap until the next commit adds a rectangle with
color around it, but this way it's much easier to see the individual
changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Based on Davide's ideas, but with a few tweaks:
I really like the dive number on the far right; that gives a clean
consistent look. I tried it with date on the left and depth/duration in
the middle and liked the result.
This doesn't change the font, just addresses the layout and bold heading
vs smaller sub-heading.
See #427
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old system of cloud access updates with fake percentages just wasn't
helpful. Even worse, it hid a lot important information from the user.
This should be more useful (but it will require that we localize the
messages sent from the git progress notifications and make them more
'user ready').
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When you start a new session with Download from DC, clear out the table
from the last attempt before adding the page.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Major functional change in this commit is the addition of found static BT devices
to the internal administration (on Android), in a way that is equivalent to
mobile-on-desktop. So, in both cases, the list of devices in the app are
as in the list of devices on the host OS (Linux or Android). To minimize code
duplication, the btDeviceDiscovered slot is split in two parts, the part to
act as slot for the Qt BT discovery agent (Linux, so mobile-on-desktop), and
the part only needed for Android.
Remaining to be fixed: the correct handling of the QML UI selection of
vendor/product. The first default dive computer is correctly detected,
all paired devices from the virtual vendow can be selected, but clicking
through vendors results in non logical selections. It is obvious why
this is, but a fix is not straigforward at this point.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a central function to convert a BT name to a vendor/product pair
known to Subsurface. This allows interfacing from a paired BT dive
computer, without actively selecting its type, but by selecting it
from the list of paired BT devices. So, after this, downloading from
multiple (paired) DCs is also possible.
And not the niced piece of code ...
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added a list of paired BT devices for the "Paired BT Devices" vendor. The
devices under this vendor represent all BT devces that can be found
from the local BT interface. Some special processing is required, as
the BT provided data is (obviously) missing the specific data needed
to open a BT device using libdc code. This processing is not in
this commit, but will follow. This commit is preparation for that.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
After the recent refactoring of QMLManager to btdiscovery, the
manager.getBtAddress() got superseeded by
downloadThread.data().getDetectedDeviceAddress(). Corrected this
here.
Futher some debug output is modified, so that it report the proper
function names.
This corrects the download from an automatically detected OSTC 3.
Manul selection of the same device from the fake vendor "Paired
BT Devices" does not work, however. Still work to be done in
that area.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This shouldn't be part of the UI (qmlmanager), but part of our
overall handling of dive computers and BT devices.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
all qDebug / qCDebug and friends now will be properly
logged into developer -> log, on QML.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QML and C++ model don't interact too much, a new Rule
should be created and used on the QML
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we detected a BT dive computer, we can already set up the vendor and
product for it (as well as the new BT checkbox).
Oddly, in my tests this doesn't set up the product correctly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A delegate to display the dives in a better way,
based on the code from DiveList.qml
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This already takes into account which of those dives were selected.
Right now all we have is select all or none - this needs actual support
in the UI, but once that's there, it will just work (famous last words).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Still to do:
- select the dives to save
- record the downloaded dives
but download is already working. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For this I had to also make the DCDeviceData accessible,
and for that it needed to be a pointer.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a new action on the drawer to display the
Download from Dive Computer options. Nothing works yet.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Trying to close the non-existing context drawer caused the function
to abort (and consequently not to delete the dive).
Fixes#309
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There was an extra BasicListItem inside the SwipeListItem.
This commit just removes 5 lines, the rest is indentation change.
Fixes#312
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Prior to Qt Quick Components 2.1 there was no onPressed signal for a
TextField; in order to be able to build against Qt 5.7 (which comes with
Qt Quick Components 2.0) we need to work around the lack of this signal.
This code seems to do a pretty good job at simulating it.
My attempt in commit 73c66e1d7d ("QML UI: make run with Qt 5.7 again")
didn't work so well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Assigning actions in an imperative way on component complete,
seems to cause a crash on some devices, assign declaratively
the whole list instead, hiding the gps related actions on
iOS as they are not supported on that platform.
Signed-off-by: Marco Martin <notmart@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a different take that seems to deal much better with different
width and font size combinations.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The editText property is not there anymore, we need text
Signed-off-by: Marco Martin <notmart@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fixes scrolling of the cloud credentials and simplifies code
Signed-off-by: Marco Martin <notmart@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Completely adapt to the api changes of OverlaySheet in Kirigami2
in order to achieve the same look and behavior for the dive
edits that had with kirigami1
Port most components to QtQuickContrls2, except comboboxes
in the dive edit sheet that will need a new control type
Signed-off-by: Marco Martin <notmart@gmail.com>
Sending nicely readable formatted coordinates to Google Maps does not
result in a correctly positioned map. Google likes unreadable
decimal format.
Little hacky solution. Added a gps_decimal attribute, populate that
with the standard function for format a coordinate to string, but
reset the preferences value temporarly so that it always converts it
to decimal style.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This fix seems to fix the enumerate problem: the problem that on a
seemingly non-determinstic way, all the profiles get enumerated
and rendered, causing freeze of the app, or even crash due
to out of memory.
Only 3 lines of code change, but this fix did not come easy. The
enumerate problem seems some kind of race condition between QML,
Kiragami and most definitely, the Subsurface QML code itself.
The breakthrough in my debugging was the setting of
highlightRangeMode: ListView.StrictlyEnforceRange based on
the QML documentation on snapMode: enumeration.
This fix deserves proper testing in multiple environments. As
could be seen on the developpers mailing list, I was (easily)
able to reproduce the enumerate problem, but Rick was not. So
I definitely do not claim to understand why this fix solves
the issue for me.
And as a sidenote: fixes#263 for me as well.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
It's unclear why this code was added in the first place - removing it
makes the highlight of the selected dive in the dive list work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows the user to enter multiple buddies as a comma separated list,
the "Multiple Buddies" entry is still a special case as we can only populate
the combobox with a single name for each entry.
fixes#168
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
The JS string function search returns the position of the string you
search for and -1 if that string isn't found. Also, search allows
regular expression, indexOf does just a string match. So let's use
that as it is much faster.
See issue #168
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
"Multiple Buddies" is magic in that it means "do not change the buddies
set for this dive". Allowing the user to edit that magic phrase defeats
the purpose.
This deals with part of issue #168 - but of course that magic phrase
shouldn't be fixed as English text.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When editing adive in Subsurface-mobile we can only handle one buddy
due to the limitations of the combobox. To prevent loss of data when editing
a dive with more than one buddy we display "Multiple Buddies" in the buddy
field. This creates a special case where no changes are written to the buddy field
unless the user changes buddy for that dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds the option to select a cylinder when adding or editing a dive.
Due to limited screen size we restrict the editing to the first cylinder only.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now kirigami needs to be built with a C++ plugin.
In cases of mobile operating systems such as iOS (and in a lesser measuse,
Android) having a proper plugin loaded at runtime may be difficult, so
statically link it together with all of its qml files compiled as a
qresource inside the static library.
Signed-off-by: Marco Martin <notmart@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
since the contentItem is the default property of
ScrollablePage, putting another Item after it will change
contentItem with that one, in this case the Label
Signed-off-by: Marco Martin <notmart@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There was a column of whitespace in the divelist that looked strange.
It was there so a trash can icon can appear. Now the trashcan overlaps
with the item.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This sets the list models for autocompleting suit, buddy and
divemaster.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Hide the handles for the comboboxes, making the text input fields
look like the normal text fields.
This is left as a separate patch as there currently seems to be issues with autocomplete
on Android.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds autocompleting text input fields for suit, buddy and
divemaster.
[Dirk Hohndel: some whitespace cleanup]
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Splitting the bottomlayout in two leads to columns in the grid not lining up.
It was a workaround that hopefully isn't needed any longer.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The QML manual advises against setting width property of gridLayout children
directly, and recommends setting preferred, min and/or max width instead,
letting QML do the work to determine the optimum width. But we've found
letting QML determine gridLayout widths leads to infinite loops in too many
situations, so we're forcing a width. It's better to force a width by setting
it directly, rather than setting minimum = maximum.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I did this semi-automatically: I used the script from
the previous patch and then did some manual corrections.
This marks only title: and text: tags, there might be others
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The ApplicationWindow has the backRequested signal and if we don't accept
that event, Kirigami will exit the app which is never what we want.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While this seemed to work fine on iOS and when compiling the QML UI on
a desktop, on Android the nocloud button wasn't shown at app start.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The grid layout had each column fixed to a width
taken as a portion of the grid width, but since
the grid has a columnSpacing defined as well,
the computation doesn't add up, helping in causing
an infinite recursion problem in the attempt of
sizing and positioning all the children of the layout
[Dirk Hohndel: heavily modified, but the basic idea remains]
Signed-off-by: Marco Martin <notmart@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
if the text in every column can wrap anywhre,
we don't have a stable way to know how large the columns
themselves may be. This can cause an infinite recursion
while trying to figure out the width of the items, as
the sizeHint(Qt::ImplicitSize) of those labels
(Buddy, Cylinder etc) will not be stable as it will once
return the size of the text wrapped and once the size of
the text not wrapped.
Signed-off-by: Marco Martin <notmart@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the big layout causes an infinite recursion in the Qt/QML layout
engine.
Also remove a no longer accurate comment.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>