This appears to prevent Bluetooth from working.
Fixes: #2370
Suggested-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As per request from users on scubaforum.com, this adds
the current gradient factor to the deco information of
the infobox. Up to now, this information was only
graphically represented in the pressure bar graph
and the heatmap. This gives a numerical value.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
When selecting all dives via CTRL-A or manually and the trips
were not expanded, the QSelectionModel sends a single
selectionChanged signal per trip. We are reloading the map
in every call, making this very slow.
I couldn't figure out how to make QSelectionModel behave more
nicely, therefore I chose the nuclear option: Remove the map
reloading from selectionChanged() and hook into all functions
that do selection changes. In these functions, first call the
original code and then do the selection-changed operations.
This will certainly need some tuning.
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The code seemed to do something really reasonable by picking one of the
supported OSTC versions - except that the one it picked didn't support
BT/BLE and therefore our logic of recognizing dive computers on iOS
failed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If there is a local cache, we at least once successfully accessed the cloud, so
this is a valid cloud based git tree.
Without this change we run into a subtle bug: after a fresh install, or when
switching users, when the cloud data is accessed the very first time, we don't
remember that this was indeed loaded from the cloud. So if we then download
from a dive computer or make any other changes to the dive log, we cannot save
those dives to cloud storage - but we fail silently doing so. Which to the user
would look that inexplicable data loss.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When displaying segment or stop times in the planner notes, we always
round to the next full minute. This can mean for example that we
round down more often than rounding up with the result that the sum
of the segment times does not match the total runtime and can for example
lead to stops that are shown with 0min duration.
With this patch, we increase the reference time of the last display only
by the duration time actually shown. This way, the rounding errors don't
accumulate but having rounded down previously makes rounding up the next
time more propable.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
When computing the best mix for a target depth, for helium, one
can either require that the partial pressure of N2 is the same
as at the target depth or the partial pressure of N2 plus O2.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
When clicking "done" on the dive site edit screen, the diveSite
member variable was reset to nullptr in acceptChanges() at the
beginning of the function. This prevented posting an undo-command
as a consequence of the active widget losing focus.
Reset the diveSite variable after exiting dive-site mode, which
causes the active widget to lose focus.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of copying the displayed dive, generate an undo command.
This makes the replanning an undoable action and fixes a bug
where the dive details have not been updated correctly.
Fixes#2280
Reported-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In dive site mode, export selected dive sites, not dive sites
of selected dives.
Fixes#2275.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The application could be crashed by
1) Create dive site
2) Edit dive site
3) Undo until dive site is removed
4) Continue editing now non-existing dive site
Therefore, hook into the dive-site-deleted signal and if the
currently edited dive site is deleted, close the widget.
When closing the widget, make sure that the potentially
dangling pointer is reset to zero so that there is no
other potential use-after-free bug.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To recognize HTML-notes the text was scanned for <div> tags. But
apparently the planner notes do not feature such a thing. Therefore
extend recognition of HTML to <table> tags.
Note we can't use the <html> or <span> tags, because these are
*always* produced by the QTextEdit::toHtml() function.
Fixes#2265
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The create_plot_info_new() function releases old plot data. This
can only work if the plot_info structure was initialized previously.
The ProfileWidget2 did that by a memset, but other parts of the code
did not.
Therefore, introduce a init_plot_info() function and call that when
generating a plot_info struct. Constructors would make this so much
easier - but since this is called from C, we can't use them.
Fixes#2251
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On the main tab, the trip time was not shown when switching to
a trip. Implement showing of the trip date in a function, as the
undo-code will also have to update the trip date in certain
circumstances.
Fixes#2207
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This button only closes the filter panel but doesn't clear it.
Reported-by: Adric Norris <landstander668@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit 0c38754916 introduced a
bug in MapLocationModel::reload() by setting an entry in the
name-to-location map before the location was initialized.
Move the setting of the map entry back where it was before:
after the assignment of the location variable.
Moreover, define the location variable directly on allocation
of the location to avoid thus bugs in the future.
Why did we not get a "might be used unitialized" warning
anyway?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The plotDive() function had a flag to plot pictures asynchronously.
This was used on export. Rename this field to "instant" and disable
animations when set. This should make sure that the axes are properly
exported.
Fixes#2170
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This optionally allows accessing data in /media/ folders, if the user
issues:
snap connect subsurface:removable-media
https://docs.snapcraft.io/removable-media-interface
Signed-off-by: Michał Sawicz <michal@sawicz.net>
A user reports a problem when dives have the same time but different
numbers. The dives appear sorted randomly (effectively they are sorted
by an internal unique-id).
Try to sort by number for dives at the same date in this case.
Fixes#2086
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Adds "Import->Import dive sites" menu to mainwindow.cpp and adds the
on_actionImportDiveSites_triggered() method to prompt for the filename
to import from. The files are parsed and then any dive and trip data is
cleared before opening a dialog box to select which sites are to be
imported.
Signed-off-by: Doug Junkins <junkins@foghead.com>
Fixed bug in the Haversine function in get_distance() based on algorithm
at https://www.movable-type.co.uk/scripts/latlong.html and added bounds
to the 'a' term to avoid floating point errors for antipodal points.
Signed-off-by: Doug Junkins <junkins@foghead.com>
