To do this a few things needed to move into the os specific files, but the
overall change is fairly small and the difference on the Mac is amazing.
Subsurface now becomes a Mac app with Mac toolbar and useful default
fonts.
Changed the CFBundleIdentifier to be the reverse DNS of the subsurface
site (sadly, 'torvalds' is not yet a TLD).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far we hard coded /dev/ttyUSB0 - which is a good starting point in
Linux but not so useful on Windows or MacOS. This was now moved into one
of our OS helper functions with (somewhat) reasonable defaults.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Right now the options are "Save" and "Cancel". I wrote that code and it
always bugged me - "Cancel" could mean that I want to cancel the the whole
operation, i.e. that I don't want to quit after all. Showing "Save" and
"No" seems much more logical.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
They were never intended to be sortable, but using common code with the
dive list picked up that "sort by index" thing by mistake.
If we really want to be able to sort cylinders by O2 percentage (which
really doesn't seem to make much sense, considering that you usually
have just one or two cylinders) we will need to also handle the case of
editing the (differently sorted) cylinder table. Which we don't do now.
Reported-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested by Henrik Aronsen, and seems much more natural. Especially
with lots of keyboards having function keys oddly mapped.
Suggested-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently just tied to F1-F4 (for divelist, profile, info, and "all
three" respectively), which is just crazy. But using "ctrl-P" for
"Profile" isn't sane either, that's the standard printer keyboard
shortcut. So what would be good keyboard shortcuts for these things?
I also wonder how I can get gtk to shut up about the fact that a pane
becomes too small for the contents of that pane? We very much want to do
that, and it's very intentional. Gtk does the right thing apart from
the whining (and apart from the visually ugly part of a widget that
doesn't fit, but making it pretty doesn't really seem possible).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The profile colors were defined all over the place, so I put them all in one spot. I'm unsure if this is the best solution to that problem, but I guess it's a step in the right direction.
Signed-Off-By: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
It doesn't make sense with the new three-pane layout, and I don't think
we're reviving it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds tested code for Linux and Mac OS, implementing the api that
Linus suggested.
The Windows code was moved into its own file, but hasn't even been compile
tested, yet.
In order to have just one interface to set or get a preference value we
encode TRUE as (void *) 1 and FALSE as NULL. This works consistently on
all platforms and regardless of whether we have 32 or 64 bit.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I'm not happy with it, but it looks good and works better than the
alternatives I've looked at so far.
So why not happy? It's not configurable, and gtk really doesn't do a
great job with the case of notebook widgets that are shrunk to be
smaller than the contents (the cut-off gets ugly, and is outside the
notebook page!)
But committing as a way to keep track of this, and let Dirk use it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus noted an odd "CRITICAL" warning when ripping off a page of the
notebook and then dropping it within the same notebook.
Turns out we need to simply accept a drop on ourselves and gtk does the
rest correctly.
I also fixed the fact that we incorrectly declared the callback as 'void'.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* 'add-info-stats-page' of git://github.com/dirkhh/subsurface:
Add Info & Stats page to the notebook
Even more places with pressure and volume conversions
Further cleanup of pressure and volume conversions
Use unit functions to get column headers, add unit function for pressure
More consistency improvements
Add new helper function to get temperature and unit
This provides the relevant information for the currently selected dive
plus a bunch of statistics over all dives in the dive_table.
The visual design has lots of room for improvement
- right now the different fields change size
- it might be nice to have a more modern look for the entries
- the O2/He field is odd - for most divers the He value will
always be 0, so maybe we should only show He if there's at least one
dive that uses He? Also, we simply do a comma separated list of gases
for all the tanks used
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
That's what gtk_init() does with gtk-specific arguments. IOW, if you do
things like
subsurface --g-fatal-warnings dives.xml
to get a real abort on gtk warnings, gtk_init needs to be able to
actually change argc/argv.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Provides compatibility with winxp-32bit in gtk-gui.c,
since RegGetValue is only available on the 64bit build of the OS.
Fixed whitespace issues, fixed obvious typo (this patch clearly wasn't
even compile tested)
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With this we are able to include both a separate .ico file that the
program can load at runtime and a .res file (that is created from the .rc
file, both in the packaging/windows directory) that is linked into the
executable and makes the Windows Explorer show the correct icon for
subsurface.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
No change at all to non-Windows builds.
Everything seems to work with preferences - but only tested on Win7
Remaining issue: displaying an icon (or the logo in the About dialog)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far this just removes the gconf code - so no preferences for Windows.
It also removes the unsused gconf references in main.c
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Create a table with four rows of toggle events and resize it as needed.
This may not create the most beautiful layout, but it works.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Right now they are displayed in one hbox which doesn't work if you have
many events - but the code itself works and correctly toggles the events
on and off.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Not being careful enough doing copy and paste and then making manual
changes... this inconsistency caused subsurface to always store the
opposite of what you wanted in the preferences for SAC and O2%.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Turns out I used the wrong function to keep the size of notebook pages
that were ripped off. Using gtk_widget_set_size_request on the new
notebook creates a hard minimum size for this window.
Instead we should use gtk_window_set_default_size on the new window that
is the parent of the notebook. This has the desired effect of creating the
new window with the same size as the one the page was ripped off from -
without making that the minimum size for this window.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
From a usecase point of view - if we call with multiple file names then
most likely it's
subsurface MyDives.xml new_dive1.xml new_dive2.xml
and therefore the existing "database" is the first filename, not the last
one (as the current implementation assumes).
Frankly, this is a bit arbitrary - but this one seems to make more sense.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used to set a fixed size instead of just copying the size that the
existing notebook has - which didn't really feel right when resizing and
then ripping of a page.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I'm trying to get subsurface to get closer to becoming a "regular desktop
application"; so far this is based on the recommendations and guidelines
on OpenSUSE and Fedora.
The icon is now named subsurface.svg and make install installs it in the
correct location. At runtime subsurface first checks if an icon is
installed and if it is it uses that - otherwise it falls back to the old
code that tries to read the svg file from the current directory.
We also install a subsurface.desktop file
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove casts from/to void*. They are unneeded in C, can hide problems
in the future, and are far too C++ish. Furthermore, they were
inconsistent with the rest of the code and even with regards to
themselves (at least in terms of whether or not to have space after the
cast).
In this case, we temporarily lose const specifiers in libdivecomputer.c
due to the unneeded cast, so it seems better to avoid the cast at all,
so you get warned about a const->non-const cast if you ever change it to
do something like this.
The casts in gtk-gui.c are just useless semantically, although they
might be useful as a hint to the reader that the void pointers are char
arrays.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If we choose a file in the import dialog then this should imply clicking
OK in that dialog - no reason for a two step process.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
That's a gtk limitation.
So you have to import XML files one at a time. If this is too big of a
restriction then we need to redesign the import dialog.
Sgned-off-by: Dirk Hohndel <dirk@hohndel.org>
Open (or adding a file name on the command line) means that this is just
one of the files that you consider part of your dive history. So dives
don't get automagically numbered and the dive_list is not considered
"changed" just because another file was opened.
Import (or adding a file on the command line after --import) means that
you are importing the content of this file to your dive history. So if the
imported file has un-numbered dives that are newer than everything else,
those get correctly renumbered. And importing marks the dive_list as
changed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If renumbering a list of dives, default the start number to the existing
first dive number. That way, if you do need to renumber (overlapping
import or whatever), but your at least had your really old dives already
numbered, we start off with a sane default.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All the callers were always calling report_dives first, followed by
dive_list_update_dives(). And there really was no reason to have the
callers call two separate functions for the "I've added new dives" case.
So just call dive_list_update_dives() directly from report_dives(), and
remove it from the callers.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We draw a little red triangle (of hardcoded size - not sure if this SHOULD
scale with the size of the plot... I like it better if it doesn't) to the
left of an event.
We then maintain an array of rectangles that each circumscribe one of
those event triangles and if the mouse pointer enters one of these
rectangles then we display (after a short delay) a tooltip with the event
text.
Manually creating these rectangles, maintaining the coordinate offset,
checking if we are inside one of these rectangles and then showing a
tooltip... this all seems like there should be gtk functions to do this by
default... but if there are then I failed to find them. So instead I
manually implemented the necessary logic.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previously we passed in width and height and the routine itself decided to
keep 5% margin around each edge - oddly doing this with double precision,
even though this is all integer coordinates.
Instead we are now passing in a drawing_area. We are kind of abusing the
cairo_rectangle_int_t data type here - but it seemed silly to redefine a
new data type for this.
Width and height give the size of the TOTAL drawing area (as before).
x and y give the offset from the edges - so the EFFECTIVE drawing area is
width-2x and height-2y
This is in preparation for adding tooltips - those need to know the
coordinate offsets from the edges - so having this hard coded inside the
plot function didn't make sense anymore.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* 'uemis-integration' of git://github.com/dirkhh/subsurface:
Remove the ability to 'Import' .SDA files
Integrate loading of uemis SDA files into the regular xml parsing
First steps towards integrating SDA files into the default XML loading
We can instead 'Open' these files as they are just bastardized XML files.
This gets us back to a more consistent point where 'Import' gets data
directly from the dive computer (and hopefully soon we will add the
ability to load a dive directly from a uemis SDA to libdivecomputer),
and 'Open' loads a file from the filesystem of the computer we are
running on (this last sentence phrased so awkwardly as the uemis Zurich
SDA is a computer and presents a file system when connected via USB - it
just doesn't have the dive data in an accessible format in that file
system).
As a bonus we get to throw away quite a bit of code (the uemis specific
file handling, mini-XML parser with helper functions, the file open dialog
in the importer). Yay!
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used to do this just for the dive list, but the new cylinder view
will want to do a lot of the same boilerplate gtk stuff, so make it a
bit more generic and move it to gtk-gui.c.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Disable the secondary notebooks that are created when ripping off a page
(dive_list or dive_profile) as drop targets for other pages.
Also fix the incorrect arguments for the drag callback function.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So we go back to the old interfaces to identify the notebook as part of
one group - the one that was just recently deprecated
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used the wrong signal - "data-drag-received" is intended to check
whether the target will accept the drop. What we want is the "drag-drop"
signal which tells the widget that something was dropped on it.
Also fix an embarrassing lack of NULL pointer checks in my string
comparisons...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Linus had used some deprecated interfcase and didn't correctly untangle
the new window that he created (hiding it the window... very nifty).
I think I'm closer to the real solution with a data structure that keeps
track of the components of the new top level window that I need to be able
to untangle (and eventually, destroy) at the end.
The one error I also can't seem to get rid of is the
Clean up the drag and drop code and allow ripping of the Dive Profile
Gtk-CRITICAL **: IA__gtk_selection_data_set: assertion `length <= 0' failed
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is somewhat hacky, and there is clearly something I still don't
understand about gtk selections and drag-n-drop. Dropping it back
works, but I get a nasty error when I do it:
(subsurface:8512): Gtk-CRITICAL **: IA__gtk_selection_data_set: assertion `length <= 0' failed
even though I actually never set any selection at all directly. So
there must be some internal gtk rule that I am violating, but I can't
see what it is.
I probably shouldn't commit it with a known ugly wart like that, but I
really have no clue. Maybe somebody else can figure out what is up.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
That also makes it always stay in front of the other window, which is
just annoying. I only did it because I wanted to make sure it dies when
the main window does, but since we just kill the main loop when closing
either window, that just isn't an issue.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'otu-tracking-v2' of git://github.com/dirkhh/subsurface:
Store options in gconf
Add preference option to chose if SAC and/or OTU should be in divelist
Fix up trivial conflicts in gtk-gui.c (cleanup in gtk dialog wrt
gtk_dialog_get_content_area() having introduced a new 'vbox' widget)
While it's not the most elegant way to do this I opted to store the
options with "inverted polarity" - i.e., the options that are supposed to
default to "True" are stored inverted since gconf reports an unset option
(first time the user runs the program) as "False".
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I've been wondering how to make 'subsurface' work better on a small
screen (I used to travel with a crappy netbook - I may have upgraded my
laptop since, but it is still a design goal of mine to make sure it all
works fine in that kind of environment).
And ever since the dive list was made much wider and moved below the
notebook, it's annoyed me how much room it all takes if I want to have
both a reasonable plot window and several dives visible at the same
time.
The solution seems to be to just make the dive list be a notebook page.
That makes the default layout very dense.
At the same time, when you have the pixels, it's horrible, because you
would want to see the dive list and move between dives while at the same
time also seeing the dive profile change. But that is solvable by
simply making the dive list notebook page be detachable, so if you have
a nice big screen, just detach the dive list page and now you have
independent windows for the dive list and the dive info.
NOTE! I don't have any way to re-attach the dang thing. I think I'd
need to learn about drag-and-drop targets etc. So once you've detached
the dive list, it stays detached.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Not quite the same format as for the kernel, but I want to do the normal
"edit the makefile before making a release" model that I'm used to.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ok, so some file chooser widget with a popup dialog would have been more
professional, but I'm lazy. Plus I suspect the popup would look
horrible when populated with /dev entries, and I don't think there is
any sane filter function.
So this works, and means that you don't *have* to recompile the whole
program just because you have your dive computer on something else than
a USB serial line.
I suspect I should save the default name as a config variable too.
Maybe a setting in the preferences dialog.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I'll add a widget to allow the user to select the device too, so let's
name things to make them more obvious.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
My home directory is a mess. Don't show all the crap, just the stuff
that might be relevant.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's really just about the logo, but whatever. Dirk tells me I need one
of these in order to call it 1.0. And I'm not going to fall into the
trap of thinking that 1.0 needs to be something polished, it just needs
to be working well enough..
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As reported by Mauro Dreissig, the progress bar doesn't work and causes
a SIGSEGV due to a missing allocation. The code broke when Dirk
separated out the GUI from the core code, and I hadn't tried
divecomputer downloads since.
Reported-by: Mauro Dreissig <mukadr@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
By using the delete-event callback instead of the destroy callback we are
able to display our dialog (and the file-save dialog) while the program
window is still being displayed. Much nicer this way.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As the application shuts down we do one more check to see if the dive that
is currently being displayed has been modified (we previously just checked
as we switch dives)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Track whether things changed in the global dive_list
So far this actually works if changing dive info (but only if dive
selected was changed after the dive info was changed).
We are not tracking changes to the cylinder information, yet.
also remove the duplicate static dive_list
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The following are UI toolkit specific:
gtk-gui.c - overall layout, main window of the UI
divelist.c - list of dives subsurface maintains
equipment.c - equipment / tank information for each dive
info.c - detailed dive info
print.c - printing
The rest is independent of the UI:
main.c i - program frame
dive.c i - creates and maintaines the internal dive list structure
libdivecomputer.c
uemis.c
parse-xml.c
save-xml.c - interface with dive computers and the XML files
profile.c - creates the data for the profile and draws it using cairo
This commit should contain NO functional changes, just moving code around
and a couple of minor abstractions.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
