.. so that different computers that have different ordering of the same
cylinders will see the end result the same way.
This also fixes up the sample sensor index and generates special initial
tank change events for the dive computers that had their cylinder
indexes renamed on them.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In planning you usually plan lengths of segments rather than runtimes to
leave a level.
This patch superseeds a previous one with a similar name and (even more)
broken spacing.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In save_window_geometry() use gdk_window_get_state() to retrieve
the window maximized state and store it in the user configuration.
Then in restore_window_geometry() restore the maximized state with
gtk_window_maximize(), if needed.
To achieve good results we also need to override "window-state-event"
for the main window and define an extra couple of configuration parameters:
"vpane_position_maximized" and "hpane_position_maximized".
Then store two different pane states for maximized and restored window each
time the user makes a switch.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Valid divelogs.de export might contain non-ascii characters in CDATA
fields as long as these characters are found in iso-8859-1. So we'll
have to test to make sure the content is fully ascii before calling
xmlStringLenDecodeEntities to decode possible character references.
Acked-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some colors such as the ones for ceiling were still green on B/W
print. This patch makes all colors in the second row
of profile.c:profile_color monochrome.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While working on UDDF export I noticed that the grabbing of last
sample pressure was not working properly. This will fix it for DLD
export.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Examples on UDDF specification indicate that pressures are reported in
Pascal. Also prefer the sample data from first dive computer for start
and end tank pressures.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch generates a gases section on UDDF export. The section
consists of all the unique gas mixes sawn on the dive log.
The latter part includes events to the export. Gas change and heading
events are properly translated to respective UDDF naming. Other events
are copied over as is. Some of the events are the same (ascent, deco,
rbt, surface) in UDDF some are not available.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The window which holds the custom print options tab appears to have
unchangeable dimensions on Windows OS (unless hacked in some way).
This makes the sliders in the custom tab not accessible unless
we add the entire dialog into a GtkScrolledWindow and return that
for the "create-custom-widget" event.
The patch also makes the contents of the "Layout Options" frame
packed vertically (with a GtkVBox) instead of horizontally, so that
the entire tab contents are "mostly" scrollable vertically instead
of horizontally.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also make the profile border color the same as the depth grid color.
Fixes#97
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This replaces the hardcoded sizes all over the sources.
Make the size in the text_render_options_t a double - With this you can
compile Subsurface with
make CLCFLAGS=-DTEXT_SCALE=1.5
and the fonts in the profile are 50% bigger. Very nice on a high-pixel
density display.
Also remove the unused text_render_options for event text.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch implements exporting dives from Subsurface to UDDF format.
Events and cylinder info are the most remarkable things still missing
from the export.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While colorButton defaults to "color" in first access to print menu, it seems
preferable to keep the last state selected by the user. At least until exit session.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
close() should be included from unistd.h, instead of fcntl.h for
better portability.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
92.5 is wrong the correct divisor is its inverse number 108.1
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While it makes sense for the program to have a 7.5% fixed header, from a
user perspectice this is just odd. So instead we now have the notes,
profile and tank data sizes add up to 100% and scale the information when
it is combined with the header.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
To make this easier I created a new helper function create_label that
takes printf style arguments. I assumed this would be usable in many
places but ended up finding just one other obvious use for it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds support for UDDF version 3.1 as produced by at least
DiversDiary. Basically we have to include the different name space into
our selections.
This patch also checks if the temperature is zero on all samples and
skips temperature readings if it looks like the dive computer does not
record them.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We can trim the printout with only profile and tanks sliders, so add an
insensitive scale for notes which report the percentage that it's is
getting while changing the others, for informative purposes.
Initialize default values for print_options struct.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Gtk complains if there is no GCallback to connect.
Fixes too a bug with gtk_toggle_button_set_active for radio5.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Define a new frame wich will englobe the layout options.
1.- Move to this frame the color profile printing by Amit
2.- Add an option which switches the position of the profile and a
predefined block comprensive of header, tanks data and notes.
- Divide print() in two macros PROFILE_BLOCK and NOTES_BLOCK
- Add a gboolean to print_options. If unselected (default) we
get the actual disposition. If selected, switches blocks.
3.- Add two buttons with labels to set the height of the profile, and tanks.
We select the percentage of layout occupied by each option, reserving
7% for the header (non adjustable), and assign the rest to notes.
- Values in % have got hardcoded min/max (e.g. being the
profile a major feature of subsurface, would be meaningless
make it < 37%)
- The values are initialised to the actual ones, so leaving
them untouched defaults to the old printout.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As logical extension of the ability to add bookmarks and gas changes this
adds the ability to remove (any arbitrary) event that happens at the mouse
position (specifically, that is within +/- six (scaled) pixels around the
x-position (time) of the mouse). That's the same width that the triangle
marker occupies which was moved to be centered around the event time in
commit 5752e9742e86 ("Finetune event triangle position to have the top
point at the event time").
Fixes#60
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use the infrastructure created for manually adding gas change events to
also be able to add bookmarks.
[Dirk Hohndel: This combines two commits for clarity. I also cleaned up
the indentation and changed the code to no longer print the
exact same text twice.]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previously the heading information was on bookmark event, but now we
trigger a heading event when direction info is available.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Gas with index 0 is assumed to be the first gas only if there is no
gaschage event in the first 30 seconds of the dive.
[Dirk Hohndel: minor formatting change in a logical expression]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Here is a patch that restricts the gases listed in the divelist to those
that are actually used. I seem to have the indentation now under control
but I am not sure about the logic:
1) First gas (with index 0) is always used.
2) If there is a gas switch event, the new gas is also used (determined by
walking the list of dive computers and then the list of events).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Create a little widget that lists all the gases / tanks we know about and
allow the user to pick one of them.
Turns out that add_event only added events at the end of the list - but we
treat that list as chronologically sorted. So I fixed that little
mis-feature as well.
This does raise the question whether we need the inverse operation
(removing a gas change). And if there are other things that we should be
able to manually edit, now that we have the infrastructure for this neat
little context menu...
See #60 -- this doesn't address all of the issues mentioned there, but at
least deals with the 'headline' of the feature request...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is completely bogus as all it does is print out the corresponding
time for the spot we right-clicked on the profile. But that at least shows
that the infrastructure is working as intended...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Seems that we have to NULL terminate the buffer for
xmlStringLenDecodeEntitites() as otherwise we might end up having extra
data at the end of returned buffer. (Somehow the length parameter is
not respected always, even if it is the proper size returned by the
zip_fread() - header_skip).
Also free the buffer returned by xmlStringLenDecodeEntitites().
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The separator was printed if SITE had data, even if LOCATION was empty.
Now print the separator only if both of these contain data.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The zip_int64_t type appears to be missing with mingw so it breaks my cross
builds - and this is clearly equivalent.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
divelogs.de sends us XML files that explicitly state that they are in
ISO-8859-1 encoding (which is true). These files contain the HTML encoded
Cyrillic characters. Once we decode those characters the resulting file is
actually UTF-8 encoded (which is a superset of ISO-8859-1). That seriously
confuses libxml when it tries to parse things.
So instead recognize divelogs.de files and skip the encoding declaration
for them before decoding the HTML encoded non-ISO-8859-1 characters.
This does show, however, that divelogs.de incorrectly truncates the
encoded strings (at least in some sample data that I created the parsing
throws errors because of that).
Reported-by: Sergey Starosek <sergey.starosek@gmail.com>
Based-on-code-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We grab the pressure information from samples, if available. Otherwise,
we use information from first cylinder.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The callback function for switching colour printing on/off was
registered after the initial activation of the button. This meant the
first attempt to print was compromised. We move the registration so that
printing works as the user specifies from the first attempt.
Tested by printing both B/W and colour images to file with minimal mouse
clicks.
Spotted by Salva - thanks.
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to have CDATA around text fields to support e.g. Cyrillic
alphabet.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit 6044c22741 wrongly assumed that a disabled .po file had a companion
.disabled file instead of an .aliases file.
Running make after "tx pull -af" generated errors which I tried to fix. I
shouldn't have, because the Makefile did the right thing. It warned about a
missing .aliases file for a brand new translation.
So, I'm reverting the commit and use "tx pull -f" instead the next time I
need to test existing translations.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Disabled translations have a .disabled file instead of
an .aliases file. Without this patch I couldn't make
subsurface after a tx pull (when testing translations).
This patch makes the .aliases file an explicit requirement
for a valid translation.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The password is handled in clear text and stored in the config as such.
Some people might object to that...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This has no user interface and hardcodes a testing username / password.
But it can successfully create a DLD file (thanks to Miika and Lubomir)
and then uses libsoup to upload that to the server.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- Add a button and callback to the print dialog to let the user select
color printing.
- Add a state variable to the options struct to track the users choice.
- Use a darker color for the grid on dive plot; that way we can see it.
- Default to use color printing.
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
patch contains:
- replacement for open_memstream()
- storage of the temporary zip file in the OS temporary directory
- replacement usage of mktemp() with g_mkstemp()
patch based on work by Miika Turkia.
[Dirk Hohndel: as suggested by Miika I commented out the deletion of the
DLD file]
Acked-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Ensure that Kfreebsd and HURD are recognized as "like Linux"
Signed-off-by: Sylvestre Ledru <sylvestre@debian.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Summing up weights ended only when there was one parameter left. With no
parameters we ended up in an infinite loop. Now we end also in case of
no parameters.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This generates a .DLD file of selected dives to be uploaded to
divelogs.de. The actual upload functionality along with sensible user
interface is still to be implemented. However, the resulting file from
this patch is tested to work (as far as I can tell) using upload API of
divelogs.de.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The resulting divelogs.de formatted XML is then to be zipped and
uploaded to divelogs.de website.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
draw_table():
When get_dive_for_printing() returns NULL, instead of
breaking, we should 'continue' trough the entire loop. Otherwise
the paginate() handler will be called dive_table.nr times, until
it returns TRUE.
Fixes a bug where, for example one selected dive can end up allocating
dive_table.nr pages for printing.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In 'table print' for some launguages the table header titles can span
on two lines and the text on the second line ends up overlapping with
the table border. With this patch two lines are reserved for the table
header instead of one.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Strangely on Linux everything looks fine, but Windows shows the header
two times on the first page, which is due to the pango_cairo_show_layout()
function being called both for the 'paginating' and 'regular' stages
in show_table_header().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
