This patch addes body to the functions subsurface_get_conf_int()
and subsurface_set_conf_int().
It also makes some small changes:
- subsurface_get_conf_bool() now uses subsurface_get_conf_int()
- for retrieving DWORDS we would only need RegQueryValueEx,
thus the wchar_t conversations aren't really needed, unless
we start storing integers in keys with UTF-8 characters in the name.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch puts the contents of the dive edit dialog inside
a scroll container, with a minimal size equal to the default dialog
size when no equipment is added. If more tanks and weights entries
are added, a scrollbar will appear on the right and the dialog
will become scrollable.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also make sure the config is flushed to disk.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit has gone through a few iterations and I trimmed it down to
what I consider the "conservative minimum" - so this only stores window
size, not window position. And in my mind that's the more relevant part,
anyway. Have your window manager position the window at a "smart" spot on
your screen...
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Translation management is done through Transifex now for easy translations.
Translators should note that fuzzy strings are not used any more since
Transifex does not handle it (by choice).
In order to pull translations, you need a transifex.com account.
Signed-off-by: Kévin Raymond <shaiton@fedoraproject.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This change makes it possible to edit date and time of a dive from the
normal dive edit dialog (it turns the label at the top of the dialog into
a button and allows the user to change the time from there - this seems
much more obvious than the 'right-click in the divelist' approach).
Additionally, if the dive has only one divecomputer and no samples (which
likely means that the dive was manually entered in Subsurface or imported
from another divelog where it was manually entered) then we allow editing
of duration, max depth and avg depth as well.
This fixes#75 (well, with the exception of water temperature.... we
don't allow editing of that at all... I guess that should become a new
trac item...)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We now show the correct device name for Bluetooth connected dive computers in
the drop down menu in the Download dialog.
This also updates the corresponding chapter in user manual.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We had this before - it appears that some versions of OSX need us to explicitly
list the frameworks we are using during the linking stage while others are
perfectly happy without that. But since listing them doesn't appear to hurt
this commit should be safe.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
You cannot include the LSOpen.h directly on OSX - it is too far down in
the System hierarchy to locate. Instead we include the umbrella header
CoreServices.h which finds it for us.
Signed off by Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We had a report that on small screen systems like netbooks with a vertical
screen resolution of only 600 pixels Subsurface has usability issues, as
the dive editing dialog is taller than the screen.
While on some OSs the dialog can at least be moved around so the user can
fill it out and click OK or Cancel, on others (Windows XP) that does not
appear to be the case.
This small change simply takes the equipment part of this dialog and
positions it next to the dive info part instead of below it. This appears
to solve the immediate issue - but by adding the maximum number of tanks
and weight systems the dialog can still grow beyond 600 pixels vertically,
so we may have to add a scroll widget in here as well.
But for now this should be a nice improvement (and I find it reasonably
pleasing on a large display as well).
Fixes#67
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Most of the translated phrases have more characters than in english. But I
verified the Subsurface user interface, and there are no strange side effects.
I had just a doubt about "trip" translation. I used portuguese word
equivalent to "expedition". Some of the diving related words we don't
translate. Even "buddy" is the word used on local diving boats!
Signed-off-by: Eduardo Ramalho <eduardo.ramalho@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This reverts commit af9ba96da4.
I had applied this to directory with work-in-progress code that was now
mixed up with Eduardo's translation work. I'll re-apply just his
translation instead.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes a Unicode mishap in the Svedish localization that breaks
the build process.
Signed-off-by: Robert Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We can now build on Debian Squeeze again.
We also point to both the stable version and the latest development
sources in the README file.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Most of the translated phrases have more characters than in english. But I
verified the Subsurface user interface, and there are no strange side effects.
I had just a doubt about "trip" translation. I used portuguese word
equivalent to "expedition". Some of the diving related words we don't
translate. Even "buddy" is the word used on local diving boats!
Signed-off-by: Eduardo Ramalho <eduardo.ramalho@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some functions in combo_box_with_model_and_entry() are only
available to GTK 2.24 and newer. This patch adds only one #if branch,
but probably adds support to a number of outdated distributions,
such as Debian 6.0.4 and Ubuntu 10.04.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far we only allowed setting the max depth.
This changes the layout of the entry widget and makes our helper function
create_date_time_widget return the hbox in which it positions the time
entry. I plan to reuse this later when allowing to edit the duration as
well as the start date and time under certain circumstances.
This is a small part of a feature request; see #75
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Calling set_dc_nickname() only added a new entry if there was a conflict
with an existing one - which works fine if we are reading a file saved by
Subsurface, as there the device_info_list is populated at parse time, but
fails for data imported from other sources.
Fixes#74
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
this patch adds a 3rd column to the media array of rgba so we now have one
each for screen, b/w & color printing. I have defaulted to using the
same color printing & screen, but this can be altered anytime.
I have checked that the application still compiles and prints. The print
out (colour option selected) shows the deco ceiling steps in pink but
everything else appears grey scale. Further work will be required to apply
the colours to the print out, although I'm not yet sure what that involves.
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is an XSLT implementation of a function to parse the ISO 8601
datetime format used in uddf.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The existing code has an embarrassing error in its logic. It picked the
last dive in the table and made sure that the relative start time was
either N minutes after 'now' or N minutes after the last dive ends,
whichever is later.
But once the planned dive has been added to the dive list (so once we have
a first depth and time entry, that last dive now is the planned dive. And
every time focus left the start time field the start time would be
recalculated relative to the end of the dive we are currently planning.
With this patch we instead simply remember the number of the last dive
just as we create the dive plan and use that to look up the end time of
previous dive. I could have just stored that end time but I figured maybe
there could be other reasons to go back to the last dive before the
planned dive, so this seemed cleaner.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should do the same as the GTimeZone variant.
Also works on Windows.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
MacDive reports non-existent values as zero and in Imperial units it
would be 32F. This patch will try to make an educated guess whether we
have the proper temperature and pressure readings and ignore the zero
fields if it seems that there are no real samples from the dive
computer.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This does escaping / quoting for everything I found. Some of it was safe
(the divecomputer model is supplied from libdivecomputer, and none of them
have single quotes _yet_, afaik), but with this there are no '%s' strings
left except for the ones used by the helper functions (for "pre" and
"post" strings).
It also takes some of our existing uses of show_utf8(), and removes
the redundant "check if the string is NULL or empty". show_utf8() does
that internally.
Fixes#73
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
MacDive import needs to convert temperatures to Celcius. However, it
seems that MacDive reports no reading as 32F (and probably 0C when using
Metric). There is no way of knowing whether we have no reading or
the temperature is actually zero, so we use the given temperature
currently as 0C is a valid temperature...
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This extends the user manual for setting up bluetooth communication.
Signed-off-by: Jan Schubert <Jan.Schubert@GMX.li>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
To quote Linus:
Move the rule for the new version thing down.
Plain "make" will try to make the first target in the Makefile.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We create a fake divecomputer in order to draw a reasonable profile, but
when setting that up we used an empty divecomputer instead of starting
with the one that we have. This lost data (e.g., the model name of the
dc).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fixes two bugs:
- we overwrote the max depth that we read from an XML file with 0 if there
are no samples
- we didn't parse the DepthAvg tag in the DivingLog XML
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is dedicated to Lubomir ;)
Should work (tm). Not sure though if you want target
'gen_version_file' as a pre-requisite to $(NAME) or some other target.
[Dirk Hohndel: minor adjustments to make it work with gtk-gui.c]
Signed-off-by: Cristian Ionescu-Idbohrn <cristian.ionescu-idbohrn@axis.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since their XML file gives us no information as to the measurement system
used we need to ask the user to explicitly set it to metric before they
create the XML file.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On Tue, Feb 26, 2013 at 6:19 PM, Dirk Hohndel <dirk@hohndel.org> wrote:
> Miika Turkia <miika.turkia@gmail.com> writes:
>
>> On Tue, Feb 26, 2013 at 5:54 PM, Dirk Hohndel <dirk@hohndel.org> wrote:
>>> Miika Turkia <miika.turkia@gmail.com> writes:
>>>
>>>> On Tue, Feb 26, 2013 at 6:45 AM, Dirk Hohndel <dirk@hohndel.org> wrote:
>>>>> I added a few test dives exported from other software (Dm3, DiveLog 5.08,
>>>>> JDiveLog 10.2 from Mac - last one doesn't parse because of encoding... Also
>>>>> a composed XML zip file from DiveLog isn't supported, yet)
>>>>> Find them under dives
>>>>
>>>> Now this gets interesting. Is there ANY logic in the units in the
>>>> dives/TestDiveDiveLog5.08.xml? It seems that some of the temperatures
>>>> are in C (Airtemp and Watertemp) and some in F (samples). Otherwise I
>>>> would guess we are talking metric here, but I do not see any specs
>>>> (another log I have seen from DivingLog had all the units in metric,
>>>> as far as I could guess). BTW is the Weight in kg or lb?
>>>
>>> I have purchased DivingLog and should be able to create any combination
>>> of data for the test file that we could possibly want. I'll do a set in
>>> a moment that describe what SHOULD be there in their notes, maybe that
>>> will clear things up.
>>>
>>> That said, I really want to release 3.0.1 in the next couple of hours,
>>> so this may have to wait for 3.0.2 (if we end up needing that) or 3.1.
>>>
>>>> The divelogs.de UDCF format looks like it shouldn't take long to write
>>>> support for. I'll look into it this evening.
>>>
>>> It is evening for you, right? No pressure, just making sure I understand
>>> what may be coming in in patches in the next hour or two
>>
>> I currently have one version of the DivingLog XSLT. So a bit of
>> verification and that could possibly be used as is. However, this
>> could use a bit more testing than a new support to make sure things
>> are not going to be any worse than they currently are.
>>
>> I have not started with the UDCF yet, but that could be reasonably
>> fast to implement. However, no guarantees. (And yes, it is evening for
>> me)
>
> I can hold off 3.0.1 a couple hours longer if that is a realistic thing
> to do. I don't see the UDCF as that important since we have a different
> format from them that we support. So I think the best possible DivingLog
> support would be my preference.
>
> I'll add a few more exported dives from DivingLog next (and fix the
> naming of the existing ones).
In that case, here is the DivingLog XSLT if anyone can give it a test.
miika
From 4a62058f4f6fd4780f04bce6e1fe45e20abcf33f Mon Sep 17 00:00:00 2001
From: Miika Turkia <miika.turkia@gmail.com>
Date: Tue, 26 Feb 2013 17:46:53 +0200
Subject: [PATCH] XSLT for DivingLog
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
