The setpoints filled in into the ui where never set on the devicedetails
object so they where never propagated to backup or write settings.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When multiple graphs are displayed at the same time they end up being printed on top of each other.
Scale the lowest graph to accommodate the tankbar.
Add an intermediate scaling step to the depth axis when pp graphs or the tissue graph are visible.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This new version of the TagFilterSortModel actually accepts
*any* new MultiFilterInterface.
So, how to use it to create a new filter:
Implement a class that inherits from MultiFilterInterface
Implement the filterRow method
TagFilterSortModel::instance->add( myClass );
and you are done.
[Dirk Hohndel: removed some debug code and did whitespace cleanup]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A small typo broke the disabling of the graphs for the
newly added curves. ( btw, we need a designer to display
the graphs in a better way, just too much information. )
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes a bit of the logic used. Now we show every
dive if nothing is chedked.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a graphical representation of tissue loadings at the current moment during the dive
to the tooltip box. The layout is inspired by the Sherwater Petrel.Add tissue saturation plot to tooltip
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a toolbox icon to turn on a tissue plot inspired by the bar
graph of the Sherwater Petrel,
It shows the inert gas partial pressures for individual compartments. If
they are below the ambient pressure (grey line) they are shown in units of
the ambient pressure, if they are above, the excess is shown as a
percentage of the allowed overpressure for plain Buehlmann. So it has the
same units as a gradient factor. Thus also the a gradient factor line (for
the current depth) is shown.
The different tissues get different colors, greener for the faster ones and bluer
for the slower ones.
Positioning and on/off icon action still need some tender loving care.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some columns in the dive list makes more sense to have right aligned
than left aligned. This switches the numeric columns to right alignment
so they is more easily compared visually.
But, we keep the NR-column left-aligned because we use its left
indentation as dive-in-a-trip marker.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fixes two typos found by lintian.
I guess a bunch of translations will need to be updated or something, I am not
sure how they work so I didn't touch them. I presume in the worst case they
will need to be re-translated at the next iteration
--
Salvo Tomaselli
"Io non mi sento obbligato a credere che lo stesso Dio che ci ha dotato di
senso, ragione ed intelletto intendesse che noi ne facessimo a meno."
-- Galileo Galilei
http://ltworf.github.io/ltworf/
From a0e5f48349557fcccd82ba8c7555043de140835c Mon Sep 17 00:00:00 2001
From: Salvo 'LtWorf' Tomaselli <tiposchi@tiscali.it>
Signed-off-by: Salvo 'LtWorf' Tomaselli <tiposchi@tiscali.it>
Date: Fri, 12 Sep 2014 18:25:20 +0200
Subject: [PATCH] Fix typos reported by lintian
Fixes two typos reported by lintian.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch introduces a new structure holding partial pressures (doubles in bar) for
all three gases and a helper function to compute them from gasmix (which holds fractions)
and ambient pressure. Currentlty this works for OC and CCR, to be extended later to PSCR.
Currently the dive_comp_type argument is unused.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a maxcnsText widget under infoTab and populates it.
Note that I manually edited maintab.ui to display CNS and OTU
next to each other and right after gas data.
Signed-off-by: Gaetan Bisson <bisson@archlinux.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
New rules for them, a new item on the model with the text
"Empty Tags" should be marked if the user wants it to be
displayed.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Trips will be filtered if it doesn't find any tags for
dives.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch correctly filter dives based on tags, but it will
also keep showing all the empty trips.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This method should remove a row on the dive list model
visualization if none of the tags that it have are marked
as 'visible'.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This model accepts check / unchedk. Now, I need to also
plug the result of the check / uncheck to the list model.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Place the TagWidget on the correct place on the main window.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was declared on a class definition, but never implemented.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Just the ui file and a empty class to start playing with it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Application's default lang is US english, translation to
UK spelling should be done in transifex.
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Sets text strings to follow the style of existing UI components in use of
capitalisation and use of :
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The dive computer configuration dialog was a bit cluttered. This
change adds a tabbed interface separating the basic settings from
the gas, dilutent and set point settings
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commits a24eb8ac12 and 0b0860d24a introduced a nasty hack that was
needed back then to make tank and weight selection work on the Mac. But it
caused other unpleasant issues (as mentioned in the commit messages).
I re-tested this with the current Qt5.3 based builds on Mac and this hack
is no longer needed.
Fixes#638
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These are actually javascript files containing js objects and not json
files.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Turns out that the mainwindow reads the settings and sets up things -
except that this has already happened in the constructor of the static
PreferencesDialog. So only keep those parts that aren't handled there.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order to get rid of the old default font on Windows (Calibri) we are
going to near ridiculous length. The reason for this is that we in the
past always saved the default font in the settings (how stupid was that!)
and so now even with a new default font in place, since there is an
explicit font in the settings we take that instead of the default.
Instead of requiring our existing users to use a registry cleaner to get
the correct default font on Windows 7 and later (the VAST majority of our
Windows users at this stage), we simply explicitly ignore that old default
font.
There is one very nasty side effect. A user cannot set Calibri as their
font of choice on Windows 7 or later (because we always force them back
onto Segoe). Given how much nicer Segoe looks I think this is an
acceptable flaw - let's hope this doesn't come back to bite me in the
future.
At the same time this changes the default font size handling. We try to
get the default font size of the OS so the app looks "right". This seems
to not give me the expected result on Linux with KDE, but maybe I'm doing
it wrong? Looks good when testing on Windows.
See #712
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Similar change to the dive list. The idea is to not save things that are
the default. This way Subsurface will do the right thing when defaults
change.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is an elegant way around our problem with people who have the
horrible old "100px" column width in their settings. The first time they
run Subsurface after this fix things won't get better, but the offending
keys will be deleted at exit. And the second time they run, they'll get
the much more sensible new default widths.
Thanks to Thiago for this idea.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to start out with valid SAC rates in the diveplan.
Thanks to Gaetan for finding this and suggesting a different fix - this
seems cleaner to me.
Reported-by: Gaetan Bisson <bisson@archlinux.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The webservice backend sends responses in English. Let's do a better job
presenting those in the users preferred language.
Fixes#714
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The modelDataChanged method will remove all items and recreate everything
*right* now we will never use it, because we are not triggering any
changes on the model, but simply deleting and recreating it everytime
we open the dialog. to be changed in the future.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When there's a rowsAboutToBeRemoevd, remove all items from
the scene() by calling scene()->clear(), instead of creating
a method just for that.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we used removed things from the interface we could hit a dangling
pointer, so first delete the items, then let the system delete the rows.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Connects the YearlyStatistics model with the YearlyStatisticsWidget
nothing is shown right now, mostly because I need to do everything
but now it's easyer to add the things that are missing.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the old statistics panel at the botton of the new one to have
a reference view of the statistics while programming the new one.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used to have a very sad way of controlling the statistics,
now we will create the model when there's a need for it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The statistics widget is a beast, one of the parts that I dislike most
on the current subsurface implementation. This is the initial work to
change that to something amazing. This first commit adds the first bunch
of files that I think are needed, and the correct setup for the qmake and
cmake buildsystems.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we can't edit the trip date, we need to remember to
re-enable it after we disable it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Using QToolBar I was able to remove much of the dead code
from the mainwindow.ui xml file by transforming the QToolButtons
into actions and loading them dynamically in the .cpp code.
I couldn't use the designer for this ( as I wanted ) because
Qt has no notion of ToolBars outside of the areas where the
MainWindow should have one, and we use it in a very different
area.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Basically we could end up in a situation where the plotInfo is no longer
valid, yet the model changes and triggers a redraw before the new data is
passed into the TankBar.
Instead of chasing that race condition it seemed much easier to just copy
the plot_data entries and the gas information in the dive.
Fixes#716
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And move the units there.
This is a long going back and forth. What we want is narrow columns. But
what we need is something that's easy to understand for our users.
I'm open to other suggestions, but I think this moves us in the right
direction.
See #712
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was an interesting bug. When adding a dive that would end up in the
middle of the dive list, the newest dive in the dive list would end up
marked in the dive structure as selected - even though it wasn't
visualized as selected by Qt. Bad things happen if the user then made
changes to that dive without selecting something else first, for example
by either editing the dive or doing things to it like removing it from or
adding it to a trip. The same operation would also be applied to the
newest dive in the dive list.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order to offer a simple way to remove a calculated deco, if Control is pressed
while clicking on the trash can in the dive plan, that point and all following are
removed. This way the user can Ctrl-click on the first calculated waypoint.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When the user right clicks the globe, we should only present the menu action
if there's a current dive, if not, we disable it.
Signed-off-by: Karina Mochetti <karina.mochetti@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The existing code seemed way complicated, made way too many assumptions
and apparently was broken in certain cases.
This code seems very simple, looks correct and should fail gracefully
(i.e. simply do nothing) if things get confused.
Fixes#706
(I hope)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When backing up dive computer settings to XML, the confirmation
dialog shows the default file path. This patch fixes that by
displaying the correct file if the user changes the backup location.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This worked flawlessly on Mac and Linux, but on Windows I needed to add
the explicit setVisible here - not quite sure why.
Fixes#710
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far we only plan OC dives, so let's not confuse things by showing the
set point for the tank.
Fixes#261
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Turns out that the fix in commit f7119bdccf ("Planner: make sure no old
handles are around when entering Add/Plan") was incorrect. We ONLY want to
remove the existing handlers when we re-plan a dive, NOT when we call add
or plan.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is subtle. The modifications to the selection cause a redraw of the
profile. So we need to make sure that we leave the plan state and return
to profile state BEFORE we do this, otherwise we'll call into
createTemporaryPlan() with invalid data.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With this information, when we re-plan a dive we can bring the user right
back to the point where they ended - they have the waypoints in the dive
pointes table and handles are shown on the right points in the profile -
and the rest of the dive is once again calculated by the planning
algorithm.
For now this state is lost when saving the dive file as we don't add this
flag in the sample to our saved files. So if we don't find any samples
marked as manually added we add ALL of the samples as way points on the
diveplan and the user has to manually remove the ones that were
calculated.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In some cases we don't appear to remove all of the old handles from the
scene and end up showing a handle from a previous instance of the planner
in the upper right corner of the profile.
This patch makes sure that we remove any stray handles that might still be
around before entereing plan or add mode.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While planning we might have made changes to the displayed_dive. So we
need to make sure that the profile is redrawn after we cancel a plan (or a
re-plan).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When doing this, all waypoints of the calculated ascent are now waypoints
in the plan - so the user has to remove the ascent part of the dive in
order to really replan the dive. That's a pain, but we don't keep the data
around that would tell us which waypoints are user input and which ones
were calculated.
Fixes#527
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's silly to carefully calculate our ascent for each new waypoint that we
add to the plan. Let's get them all in and THEN calculate an ascent.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Simply setting the pointer to NULL leaks memory.
And that C++ recursive two function implementation... oh boy.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old implementation was... let's call it creative.
This tries to actually get things right instead of using magic.
Don't pretend that double values are ints.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use the same logic as we do for newly added dives.
As a side effect this patch appears to fix the issues with getting the
newly planned dive selected.
Fixes#692
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In some circumstances Qt will draw a really thick border around
rectangles. This explicitly makes the border of the tank bar thin.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should correctly set all the values and puts us in edit mode.
Testing so far looks good for both single dive and multiple dives selected
(i.e., you can paste into multiple dives).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the GPS coordinates for a dive were incorrect for some reason and the
user wanted to clear them in order to then re-download / apply GPS
information from the Subsurface webservice, prior to this patch we would
always match the location name and re-populate the GPS coordinates, making
it impossible to clear a GPS location without also changing the location
name.
This patch fixes this - but if you have multiple dives with the incorrect
name / GPS location pair, the next edit to a dive that had the GPS
coordinates cleared will re-populate the GPS coordinates (at that point
Subsurface can no longer tell that this was intentional).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Which actually makes the code much clearer as now the object is at the
correct spot on the canvas and the positions inside are relative to that.
No more magic gradiants starting at "92"
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a checkbox for the divecomputer download dialog that allows you
to tell the download to put the newly downloaded dives into a trip of
their own. That in turn will disable the dive merging with any existing
dives, which means that you will not mix up your newly downloaded dives
with any old dives.
That, in turn, is very convenient of you know that some of the dives were
done by other divers (or from testing that happened during servicing etc),
or the dive dates etc were wrong because the dive computer date had reset
due to battery changes etc.
Once you have all the dives in a private trip of their own, you can then
fix them up (delete dives you don't want to merge etc), and then after all
the data is ok you might want to merge the cleaned-up results with
previous trips etc, and then manually ask subsurface to merge the dives or
whatever.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also restructures the code a bit to make it a little more sane and changes
the colors slightly.
With these changes I think we can claim that this
Fixes#557
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This shows a color-coded bar at the bottom of the graph that corresponds
with the active gas.
Todo:
- text that explicitly states gas on the left edge of the bar
- better vertical positioning of the bar
- ability to turn this on and off
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far, the fields for the two SAC rates did not show a unit and were implictly l/min.
Now they respect the settings for volume units. This was harder than I thought for two reasons:
1) Imperial units for SAC are cuft/min but a typical value would be .70. So I made the point
the field prefix and what is entered is actually hundreth of cuft per minute.
2) I had to get the rounding right in order not to get effects like 20l/min become .70 cuft/min (19800 ml/min
internally) which would then become 19l/min when switching back.
While being at it, I gave the gradient factors '%'-signs as units.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch improves on the error reporting for the dive computer
configuration dialog to use config->lastError.
The previous code was using a different argument in each function,
which lacked uniformity.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
To avoid confusion, this code update makes the status text empty whenever
there is an error message. This makes the error message more prominent.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Changes the layout of the ConfigureDiveComputer dialog to use a
list of supported computers on the left, with a stacked widget
showing the configurable details.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
This patch implements the first step towards OSTC 3 firmware update.
Its not much, just file selection, but I will build up on it from there.
Implements a thread to initiate firmware updates. Currently, this is
for the OSTC 3.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Implements support for reading, writing and backup/restore of set point
settings for the OSTC 3.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Implements reading, writing and backup/restore of OSTC 3 Dil Values
(setting 0x15 to 0x19)
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Implements writing OSTC3 gas settings to the device.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Implements the reading of OSTC3 Gas Settings. These are settings
0x10 to 0x14
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Moves non gui classes (configuredivecomputer, configuredivecomputerthreads
and devicedetails) from qt-ui to the top level folder.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
I've moved the .pro file fixes to where it happened, so the rest of the
changes need explanation now. -Thiago
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
I am adding more OSTC 3 settings as I go along. Here, I have
added dive mode and saturation.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Changes the dive computer configuration dialog to use a
tabbed interface. This will make it easier to add new
dive computer models to the interface.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Adds support for more OSTC 3 Settings to the reading, writing,
backup and restore functions. These settings are: last deco,
units, sampling rate, salinity, dive mode colour and compass
gain.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
The ConfigureDiveComputer class now has functions for complete
XML backup and restore. These dump the loaded settings on a
dive computer to an XML file, and there is an option to
restore them.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
This patch enables XML backup. We can now save the settings
to an XML file. Currently this backs up just the basic stuff
such as custom text, language and brightness.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
After splitting dive computer configuration classes, the date/time
setting had not been ported. This adds the same to the classes.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
This patch polishes up on all classes added for dive computer
configuration to give a clean workflow. The classes can now
write and read data from the OSTC 3.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
This renames the dive gas functions to not talk about just nitrox, and
to instead talk about gas.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The column isn't just about NITROX, there might be air and trimix in
there too.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the dive list, calling the column O2% is kinda wrong, because in
at least my dive list there are both air and trimix showing up, so this
renames that column to Gas.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
First step towards multilingual export. Use the existing translation API
to translate and save words to JSON file.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Don't export total row in yearly statistics unless exporting the
statistics is checked
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Set Default values and remember user selected general HTML export
settings.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add new row to the yearly statistics table containing the total. Total
values are calculated to some columns only, it doesn't make any sense to
add the total value to other columns (Temperature cols for example).
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make exporting statistics to the HTML page optional.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This splits the code in configuredivecomputer.cpp into multiple files.
The read and write threads are moved to configuredivecomputerthreads.h/cpp,
and the device details class is moved to devicedetails.h/.cpp
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Adds a setting to control the device's brightness. Currently I
have only the OSTC 3. Will add more afterwards.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Improves the writing of device name to the dive computer. The
code has been updated to use a switch statement.
This will make it easier to add new devices in the future.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Improves writing of date and time to the dive computer. This
has been tested using the Heinrichs Weikamp OSTC-3.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Following suggestions on the mailing list, this changes the
method used to detect the dive computer family. Detection is
now done using: dc_device_get_type.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Adds a class to write settings to dive computer, and modifies
the existing ones to integrate it.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Added classes for reading data from dive computer. This is
at the basic level and I will expand it as I go along.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Using code from 'downloadfromdivecomputer' class, this code
loads the vendors and products to the respective comboboxes.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Create a dialog for reading and writing settings to and
from dive computers, with a menu entry in MainWindow to
open the dialog.
I will build up on this dialog and change it as needed.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
This one is less verbose and very easy to parse. It's guaranteed to have
five components, separated by ':' with no other ':' in the string:
Subsurface:<version>:<PrettyOSName>:<appCpuArch[/osCpuArch]>:<UILang>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This reverts commit 6fdbf2069d.
That was actually the wrong thing to do, now that I think about it.
Instead we should show the translated version on screen and send a
compact, easy to parse variation of this as the User-Agent header.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we didn't get back a JSON encoded string (i.e., if the response
contained no '"') we would access a QList past its boundary.
I'm somewhat hopeful that this is a last second fix for an annoying bug
I've been trying to figure out for a while.
See #514
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When transmitting the Subsurface version string we always want to use the
English terms, not the localized terms.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It was too easy to remove a picture by mistake, not anymore.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far we only did it when we added a dive or modified a manually added
dive. But the reality is that an edit of any dive could cause changes that
require the dive list to be reloaded.
Fixes#698
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Select the picture, press delete, profit.
[Dirk Hohndel: removed the stray hunk that snuck into this patch]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The gas use logic in the dive statistics page is confused.
The SAC case had a special case for "unknown", but only for
the first gas. Other gases had the normal empty case.
Also, the logic was really odd - if you had gases that weren't used (or
pressures not known) intermixed with gases you *did* have pressure for,
the statistics got really confused.
The list of gases showed all gases that we know about during the dive,
but then the gas use and SAC-rate lists wouldn't necessarily match,
because the loops that computed those stopped after the first gas that
didn't have any pressure change.
To make things worse, the first cylinder was special-cased again, so it
all lined up for the single-cylinder case.
This makes all the cylinders act the same way, leaving unknown gas use
(and thus SAC) just empty for that gas.
It also fixes the SAC calculation case where we don't have real samples,
and the profile is a fake profile - possibly with gas changes in between
the fake points. We now make the SAC calculations match what we show -
which is admittedly not at all necessarily what the dive was, but at
least we're consistent.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we have no data about the gas consumption it makes no sense to show a
SAC of 0. Instead we should show either "unknown" or nothing.
Fixes#693
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the divecomputer adds additional, unused cylinders to the dive, they
would be listed in the profile based printouts. Given that the field is
named "Gas used" that seems wrong.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This prevents zooming out to more than max in the planner. Using a Mac
MagicMouse it happens at times that the finger slides on the mouse while
dragging a waypoint which can result in zooming out further than max.
Fixes#695
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of refusing cylinder pressure data let's just mark it as red when
the values don't seem to make sense.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While on Linux it was drawn as fine 1px line, on Mac it came out rather
fat and obnoxious by default. With this it's always set to a very thin
line.
This still needs more work, but let's leave it where it is for Beta 5.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was missing from the conversion from the oldPlanner
to the new one, and it also works ok on the profile.
One thing is missing is the Labels on the bottom / left
saying which position it is, but it's already userful.
Fixes#674
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This better describes what the variable (flag) does.
It's used to inform the loop that the last row goes
our of the page limit and that we need to place a new heading
on a new page. In that context 'newHeading' is more meaningful.
The name 'isHeading' is confusing for (i == 0), since it remains
'false' yet the 0 index row is actually a heading.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If a row height is more than the available height on a page
(minus the height of a heading row) we have to skip this row (dive).
The current profile print simply does not support that and it does
not make much sense. For that to happen either the page will have
to be tiny or the user must have entered a very long text for "buddy",
"dive master", "location" or there must be some sort of a
very-large-font-while-printing type of a problem.
Technically, rows spanning on multiple pages is doable, but probably
not worth the effort.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We had pointers to data structures on the stack which we frequently
reallocated. These data structure contain basically a filename and an
offset. We then create a hash of the pointers to those datastructures with
the filename being the key. And then we passed those pointers around
through a Qt model(!!!) only in order to then later look up by filename
what the offset might be.
I am at a loss for words for the lunacy behind this design.
How about we just remember the offsets and pass the integers around?
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Because of the way deleteLater() is implemented, the pictures need to be
hidden, otherwise they might stay around at the wrong time (e.g., when
printing).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we disconnect the picture releated signals then in dive add and dive
plan mode the pictures from the last shown dive could appear on the
profile. That's not cool.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Checking for available printers appears to sometimes fail, even if there
is a valid PDF or PS printer.
Instead we bail if we can't get a valid size for the printer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While it's nice to have immediate response to gradient factor changes,
there is an oddity that very low GFHigh values can cause infinite
decompression if the last stop is at 6m.
Robert fixed this and now errors out of deco after 48 hours, but if the
user simply wants to edit their GFHigh from (for example) 75 to 70 and
deletes the '5', we really don't want to trigger a recalculation for
GFHigh of 7...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The only time we want the close button is when showing an error at the
bottom of the main window.
In the other cases (maintab, globe) we need to explicitly hide it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Revert "Don't add a close button to KMessageWidget"
This reverts commit 75c9bcd726.
Revert "Remove unused variable"
This reverts commit 9edee3477a.
I was fixing the wrong problem... instead of removing the handling of the
Close button I should have figured out why the close button was
incorrectly shown in the first place.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It appears that at least on Win7-64 Windows tries to create the temporary
file in C:\ and fails because of insufficient permissions. How stupid is
that.
Instead we roll our own tempfiles, based on the already existing tempfile
name that is passed in.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we add a picture to the dive, this will not change anything
else, so there's no need to recalculate the profile_plot info.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Save Yearly statistics as JSON data to the stats_files.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The layout was a hardcoded position without layouts, that
would only work on english language since other languages can
have bigger strings than the current ones.
Also removed the 'setFixedSize' stuff and let the widget
find it's best size for itself.
Fixes#656Fixes#396
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The issue with the dive list was actually the Planner Settings widget
that was in the same space as the dive list but hidden, but since it
had a minimum width we couldn't resize the dive list to be below the
planner settings minimum.
Fixed by inserting the contents of the Planner Settings into a QScroll
Area.
Fixes#679
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some of the toolbox icons will trigger a recalculation of the dive,
triggering then a replot, that will copy the dive to the displayed_dive
again, but in the case of a edit this would discard the edition (
that would still be shown on the UI ) leaving the dive in an
unconsistent state.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When pressing Print or Preview from the PrintDialog, we need
to first check if there are printers installed. If not
we abort and show an error message.
This is needed because if no printers are installed,
things like the reported page height could be zero and
the profile and table print code in PrintLayout will
break.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In #671 a user reported that the table print outputs a blank page if there
are dives for one page or less to be printed.
This doesn't really makes any sense.
A possible bug in Qt4's QPicture is suspected, so we only enable the
vector print for Qt 5.0 and newer versions.
See #671
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Almost invisible, mostly looking like an odd bug in the profile code,
there was a tiny red line at depth 0 in the planned profile. Turns out
that was the missing mean depth. We didn't populate enough data in the
dive computer of the dive we generated from the plan (and the length of
the depth line was incorrectly determined by the duration of the dive
instead of the duration stored in the dive computer).
Fixes#570
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to change the displayed numeric value of the altitutde and not just the
unit suffix when changing unit systems.
Fixes#681
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
zip_open needs correct directory separators. QFile::encodeName does not
do this conversion, so we must call it explicitly.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fixes the problem I pointed out im my comment to #667 and hopefully also
the original problem although I cannot confirm since i cannot reproduce the
problem in the first place.
See #677
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't blow into our cylinders under water.
Negative pressures should be allowed as they might arise from dive planning
without taking care of gas consumption.
fixes#644
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt internally always uses / as directory separator. #651 shows that in the recent
files menu, under windows we can have double entries with both versions of the
separator. This patch should normalize the menu entires to use the native separator
(i.e. \ on Windows). (Untested due to lack of Windows computer).
See #651
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is yet another unintended side effect of the UI restructure changes.
I stared at this code for so long - I can't believe I kept missing this.
Fixes#668
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The error with 'ungrabMouse' warning that we got was because
we were removing an item that had the mouse grab instead of
waiting a few milisseconds so it won't be the mouse grabber
anymore.
So I'v used the Animations::hide() to get rid of it, and
since it worked well, I'v also added a Animations::show()
method to display it in a good fade-in way.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the remove_picture functionality, with code
shamelessy stolen from remove_event, and hoock it
up with the interface.
Fixes#650
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the idea is to remove the picture in the future, we need
to not hold the row on the model, as when we delete one, the
other pictures will change the row. but the QUrl is unique.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch hides a picture from the dive, it should actually
remove it, but because I didn't found a quick way to remove
a picture from the dive yet, it just hides it.
To remove a picture from the dive, the DivePictureItem has to
remember the QUrl of the original file, to remove that from the
model, and currently it only has the QPixmap.
this can be for 4.2.1 or we can postpone 4.2 a tiny bit since this
is a important feature.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Reusing the displayed_dive for this caused all kind of odd problems that
were hard to reproduce, because the behavior depended on what was in the
corresponding fields of the current_dive. Worse: the GPS location handling
prevented us from reliably removing the location of a trip.
The solution isn't ideal and certainly isn't elegant. Maybe we simply
shouldn't reuse the widget here. But I think what I have now works - I
tried hard to make it break again and couldn't.
Fixes#659
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was preventing the recalculation of the ticks, making the
line static when we enabled or disabled the PP graphs.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
"ups", as I did this in Metric system I forgot to update
to imperial when the user selected it.
Fixes#665
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I know I tested this - no idea how I missed this.
Anyway, this was of course utterly bogus. Whenever we get a time from a
time_t into a Qt Date or Time datastructure, we need to adjust it by the
timezone offset as otherwise Qt will assume it's in local time and
helpfully change it to the wrong values for us.
See #655
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
[Dirk Hohndel: took only one of the two parts and adjusted commit message
accordingly]
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use const-reference where we can gain a bit of speed from that
and clear an else { if {}} by using else if.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Our core structures are kept consistent by calling delete_single_dive()
and there is no reason at all to even touch the UI selection as this all
goes away with cleanUpEmpty()
Fixes#660
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
commit f29f41ae9e ("Planner: fix start time handling") broke the start
time handling for Add dive. While in actual planner mode we set the start
time for the plan, we did not do this when simply adding a dive. The
moment the time / date was changed (which admittedly in real life a user
would most likely do) all was well, but if the user just accepted the
"now + 1h" default, things went badly wrong.
Fixes#658
See #655
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There is a weird QPicture dependency; we need to offset a page
by headingRowHeightD2, which is half the heading height.
The same doesn't make sense if we are rendering the table widget
directly to the printer-painter.
Moving the offset inside 'pageIndexes' is less desirable.
The bug itself manifests when a top margin is set on Win32,
while on Linux it's more obvious.
On new page start, a fixed height from the last dive on the
previous page becomes visible even if the math seems correct.
Offsetting both the page index and the vertical position at
which the QPicture is placed fixes that.
If 'table.render(&painter...)' is used the bug also goes away
and our 'pageIndexes' start to make sense again, but we want
to use QPicture so that the table is in vector. I don't have a good
explanation why this happens!
Tested on Ubuntu 12.04 and Win7.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use QPicture to do that.
QPainter::drawPicture() requires offsetting the target QPoint's
Y value by two times the headingRow height.
This can be improved the hardcodding the offset when the
'pageIndexes' are calculated, but is a bit complicated.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For the profile print, the number of dives per page is:
divesPerRow * divesPerColumn
If we have more 3, 0.6 seems optimal, while for less we can
pretty much use the default scale of 1.0.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The QImage fix for the recently reported
"huge-vector-lines-in-PDF-printouts" bug is only needed on Linux.
For Win32 and OSx we can render to vector.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fixing the font size is required, because we don't really support
a dynamic row height, as the row height is set in the class
constructor.
7 seems optimal for all print modes.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is wrong because we don't really need to scale. We already
have the estimated page dimentions in pixels, so taking the
quotient of the printer DPI and screen DPI and then scaling
(probably up) our rendered widgets via the QPainter introduces
blur (due to the oversampling), and a performance penalty.
By rendering at the exact dimensions we ensure that the widgets
are crisp at a 100% printout.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With this option there is an exception, which makes the notes section of
the profile table occupy half the page. This way dive plans can reasonably
be printed.
Fixes#636
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We setup the startTime for the dive plan in too many places... but never
actually copied it into the planned dive.
Fixes#640
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Including a tiny change for one of the new strings to be consistent with
the capitalization rules we recently established.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
qt 5.3, win7 64bit.
beginRemoveRows() asserts in removeSelectedPoints()
because rowCount() - 1, becomes less than firstRow.
This needs a check in removeSelectedPoints() if the number
of passed rows is zero.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes the screen repopulate itself after a dive change only
one time instead of the old 4. we were repopulateing when we
removed the actual selection to reset the old selection previously
stored, sigh.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The text we generate for the diveplan has a table inside, and
we must use HTML only for the dive plan. so I treat all text
as HTML, look for a table item, if it doesn't have, I treat
it as Simple text and set it on the notes. Works and makes
linus loves me again.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This simplifies so much of the code that we were using to control
the visibility of the HeartRate. now things are much saner.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This breaks compatibility with old preferences, but it's a single
key and not that very important so I don't think it's a bigger issue
I've renamed prefs.animation to prefs.animation_speed to denote
that it's a value, and not a state.
Also, fixed the places that were treating it as a state (on/off)
to treat it like a correct value.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The pictures were being plotted in print mode, the main
reason for this was that when we entered print mode and
had already a picture plotted, the method would return
before removing them from the screen. This fixes it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
for some reason we did a if(true) setValue(true) else serValue(false)
now we just use the value to set the value. =p
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
All other default settings we get from subsurfacestartup.c's
initialization of the prefs struct. The planner had its defaults there
and in the retrieve of the settings from QSettings.
This changes so the defaults for planner settings will be read from the
defaults prefs struct as all other settings.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Before this function was changed it was really supposed to just change a
gas that was passed in in case there was an event that changed the mix -
but with the new name the caller will assume that they get a valid gasmix.
And promptly we had one caller that didn't initialize gas to be based on
the first cylinder before calling get_gas_at_time().
Instead of adding yet one more spot that knows about the oddity of the old
API I simply changed get_gas_at_time() to do what it name appears to imply
and fixed the other callers not to bother to initialize the gasmix.
Fixes#647
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Not supported. Also the profile in "6 dives per page" doesn't really
allow much variations because it looks bad if we scale it down further
on A4.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These were hidden and we don't really support them because
our print layouting is not that flexible in Qt!
Note: printoptions.ui is now converted to UNIX line breaks.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Well, the information was bad, it was being printed twice
if the text is HTML, print only once.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
well... we have a good and working printing system now. :)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I think it's intuitive to do not warn if everything was according to the
plan, and keep the dialog open after a print was due is something that I
find it strange.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch just adds the HTML Delegate to print the text.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The model was not being deleted when the table was, and thus we
recreated it for every print.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QPointer is a smart pointer, it will delete itself when the
refcount == 0.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I don't know if this fixes anything, but it is asked of us to
do that by the Qt docs.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added a HTML delegate to show rendered HTML on print.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This converts the get_gas_from_events to a get_gas_at_time function that
actually maps our events to what cylinder and thus gas we are breathing
at that time.
[Dirk Hohndel: fixed to actually use the gas that was looked up
(and make things compile)]
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
current_dive is the selected dive, and displayed_dive is the one we are
currently drawing. They are quite often the same one, but not in the
case of adding a dive for example.
This fixes potential null pointer dereferences in the case of a blank
divelist, and makes sure we use the correct data in the case of adding
and planning dives.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Get rid of unit type shortcut in planner. Also use "to" instead of "-" in ascent rate intervals.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
is_cylinder_used uses get_cylinder_index as underlaying function that
does the right thing with with respect on how to find the closest
matching cylinder, and handles both types of gaschange events correctly.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds two changes
a) it uses rint() to make sure we don't truncate the displayed values
b) it moves the update of the displayed values into a helper function that
is also called whenever the settings change
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Back in 4.0 we hide all gaschange events during the first 30 seconds,
not just gaschange events on second 0. Eg, the OSTC3 emits its gaschange
event on the first sample, which can be 2, 10 or 30 seconds into the
dive.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace get_gasmix_from_event and get_gasidx with get_cylinder_index.
get_cylinder_index actually knows about both types of gaschange events
and the difference between them.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For the info box, we can't use the event data, because its not 1:1
mapped to whats in the cylinder and what we actually switched to. Use
the plot_data here we already calculated what we are switching to.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The values for drop_stone_mode, bottomsac, and decosac are typically the
kind of personal data specific to a diver that is unlikely to change
from one dive plan to the next.
This patch stores/restores them to/from the preferences file. For this,
it adds bottomsac and decosac to the prefs structure; drop_stone_mode
was already there, though not stored/restored.
Signed-off-by: Gaetan Bisson <bisson@archlinux.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Calculating the timezoneoffset for the current date really makes no sense
whatsoever when displaying a time that isn't "now".
Fixes#605
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we had a trip selected, we ignored that and simply called
the DiveAdd functions, but the mainTab code that deal with selections
to show one or more dives or trips asked how many trips were selected
to the DiveList, and since a trip was selected things go kabum.
Fixes#606
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The profile was still the planner one, so we need to force
a replot.
Fixes#621
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Do not use MainWindow::instance() inside of a non-static
mainWindow method, that's just bogus.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Ugh. Each time you wanted to change a cylinder, a new connection was
being created on this object, delaying the correctly setup of the item.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When you entered part of the name of a cylinder this was
being treated as a new cylinder, and not selecting the first
one.
Fixes#628
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added a 'Use default file' button on preferences in a way
that doesn't clutters the interface.
Fixes#630
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We save an HTML table-based plan, so we need to get the text as html,
not plaintext.
Fixes#634
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- set application-wide locale from preferences
- use custom date format for display
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The access manager is only one, while we can make requests from
different parts of the application, so relying on the manager
finished() signal to see if something was done or not was a
not very good move.
The QNetworkReply is created when a get() is invocked on the
AccessManager and that's unique. connect it's finished()
signal instead.
bonus: code cleanup.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
