This code adds the disconnections of temporaries. A temporary connection
is a connection that should be active only on a certain state, and we need
to clean that for the new state that will enter after.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Those two functions are important and necessary for the Planner, they
create and remove the little balls that act as handlers so the profile
can be edited with the mouse.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a signal to MainTab, that should be removed from there
when we finish the rework on the edit part, to go to the edit classes,
but in the meantime, let's keep it there.
The signal is connected to the ProfileWidget in a way that the end of the
edit will also trigger the profile to go back to ProfileState (show the
dive, if there's any) or empty Profile (if there's none).
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is highly broken in many ways - but it's the right first step.
I ported two of the most important methods from the old profile and now if
you are in add dive mode, double clicking on the new profile will
correctly add a handler on the planned dive. To see and move the handler
around, however, you need to activate the old planner.
Next step: add the handlers on the new profile.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a temporary measure to help me port the planner to
the new profile. it will be removed when I finish the port,
but it makes the software still usable, so there's no worris.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code checked if dest and source existed before trying to call an
method on them, but dest and source are created on the constructor,
and thus, the if is dummy.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As with any other graphics object, the settings for the ruler
should be managed by the ruler, clearing up the Profile logic
and making the code easier to read.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used both preferencesChanged and settingsChanged in different
methods and classes to mean the same thing, this adds consistency.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The list of preferences that should trigger a full repaint are at the top
of this method, *if* this introduces a bug it is because some of the
preferences are not being correctly triaged yet and that needs to be
fixed. Regardless of that, now the profile will only enable / disable
the *ruler* instead of replotting everything.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The QSettings is a bit bloated on its use, so we are trying to narrow
down the amount of calls to it. We have a preferences struct, use that
instead.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
By moving the Hide/Show of the ruler to an internal method, we gain a bit
of codecleanuperism by removing a lot of unnecessary calls to their dest
and source drag-handlers.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The logic of removing the event was in the UI, and this makes
the code harder to test because we need to take into account
also the events that the interface is receiving, instead of
only relying on the algorithm to test.
so, now it lives in dive.h/.c and a unittest is easyer to make.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add the ability to close the exporting window, also Quit Subsurface with
this window in front, for consistency.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds the ability to export selected dives only in the worldmap
exporter. After Miika added the export dialog in commit 7dc642860d
("Implementing export dialog") and exporting only selected dives became a
choice while exporting.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As our menus are getting many export entries, it is better to create a
single export dialog where user is able to select the export type and
whether to export selected dives or all of them. This should also be
more intuitive than the current way when export from file menu export
all dives and right click menu on divelist exports only selected dives.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old code replotted the whole dive, while what we really wanted was to
show the events. so just ->show() them.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The 'Hide Similar Events' function asked the Profile to replot eveything,
only because some events were hidden from the interface. Instead of that
we can simply hide the events since the graph will be the same.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
That macro was useless, I should have been drunk when I wrote it, and I
don't drink.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
[Dirk Hohndel: this overlapped with my commit 09e7c61fee ("Consistently
use for_each_dive (and use it correctly)") so I took the
pieces that I had missed]
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit fb82da58a2 ("Globe: assume that we are looking at the
current_dive") changed the prototype for
GlobeGPS::prepareForGetDiveCoordinates. This patches the dummy in
NO_MARBLE.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit 2bc76beb65 ("Globe: we always center on the current dive") changed
GlobeGPS::centerOn to GlobeGPS::centerOnCurrentDive. This patches the
dummy in NO_MARBLE, too.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
No attempt is made to ensure that what the user does is sane. So this can
result in duplicate numbers, non-consecutive numbers, non-monotonous
numbers, whatever floats the users boat.
You can renumber a single dive or all selected dives (with a starting
number given that is applied to the oldest selected dive and then for each
newer selected dive that number is incremented by one).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If a dive has multiple dive computers we enable a special context menu
when the user right-clicks on the dive computer name AND is not already
showing the first dive computer. In that case we offer to make the
currently shown dive computer the first one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For most users this is no change at all. For the few who download from
multiple dive computers this now shows them which of them is the primary
dive computer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This uses the new helper function from commit fc4f133f19d0 ("Add new
helper function that looks up the index of a dive by its uniq ID") to make
the logic implemented in commit 122593a63a46 ("Fix selection after
downloading dives from the dive computer") much saner to read.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we successfully download dives, the old selection should be cleared and
the one of the newly downloaded dives should be selected. I decided to
pick the last dive downloaded, which for most dive computers (but for
example not for the Uemis SDA) will be the first or earliest of the dives.
That seems much more intuitive than keeping the previous selection around.
Of course this is harder than it should be because of the way we track
selections and because we need a consistent dive list model in order to
change the selection.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The original name was a really bad choice as we have a 'diveid' as part of
struct divecomputer - and that is not the diveid that is being used here.
Instead we use the 'id' member of struct dive which holds the "unique ID"
for this dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old code was completely bogus - it's confused about what the variable
'i' is counting.
This also let's us select the Uemis mount point by default if that's the
only valid "device" that we found.
Compile tested on Windows, untested on Mac.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user selects a Uemis divecomputer, don't show serial devices.
If the user selects a serial divecomputer, don't show the Uemis
filesystem.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the last key that went in ended a tag and the next key is a tab -
deliver that to the TabWidget instead so we can navigate between input
fields.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This may sound counterintuitive but it actually makes sense.
If you have a default filename that's the name of you "normal working
file". If you want "Save as" something, that by definition is NOT your
normal working file but a subset or an experiment or something. And you
most definitely do NOT want to overwrite your default file with that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
C specs says that we can safelly free a NULL pointer, so there's no reason
to check if it's null before freeing it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit renames getDiveById to get_dive_by_id, and it also removes the
Q_ASSERTS and if(!dive) return that the callers of this function were
calling. If it has a Q_ASSERT this means that the dive must exist,
so checking for nullness was bogus too. I've changed the assert (done
in a silly C-Way.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The DiveList classes were a partial mess (and some of it is still in a
messy state). The classes that deal with it where done in 'qtHelpers.h',
the extern global variable in dive.h, a few methods here and there. This
concentrates most - but not all - functions in their own file. The reason
for that is to make the new developer faster when looking for things: if
it's a divecomputer related method, it should be in a single file, not
scattered around.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Last time I touched this I got a scream from dirk, but then I
looked at the code again and the problem that I faced was that
I broke translations in a sad way, well, now I broke it again.
However, this method shouldn't belong to MainTab ( because of
that thingy that I said before and also many others: Separate
the logic of your application from the UI specific code )
This generates a string that's going to be used on the Interface,
it doesn't display it on the interface. Move it down below makes
it easier to test ( I don't need to create an Widget and worry
about the parent-relationship with the mainwindow just to test
this function, for instance. )
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QStrings shouldn't be == "" to check for empty string, use .isEmpty()
QStrings shouldn't be != "" to check for non empty, use .size()
std::string shouldn't be cleared with = "", use .clear()
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way, the user can save dives containing sets of "standard cylinders". Selecting one of those prepopulates the gas list for the planner.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
4243fcb915 ("Dont set coordinates when two or more dives are selected")
Changed how the prototypes in GlobeGPS looks. This aligns NO_MARBLE
version of GlobeGPS with that.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Upon pressing Ctrl-Q or the window close button a modal dialog was shown
to remind the user that the planned dive is not saved. This patch
triggers the "cancel plan" action before trying to quit.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For deco stops show the gas of the next segment in the table. In
recalculation remove old deco stops earlier.
In struct diveplan, the items are "segments" with a beginning, a duration,
and a gas. In contrast, the UI of the planner uses "waypoints" which are
the boundaries between segments. It is conventional at least for deco
stops to display the gas of the _next_ segment in the runtime table (i.e.
the gas possibly to be switched to).
Furthermore, in addStop, the old deco stops have to be removed earlier as
otherwise a new waypoint later than a previous generated gas switch
inherits the gas of the old switch.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Same problem as the previous commit: toStdString() returns a temporary,
and c_str() will return a pointer to internal data, freed at the end of
the statement. So get the pointer to be strcpy'ed in the same statement.
Changed to toUtf8() to be more explicit about the encoding and to avoid
std::string
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QList::first() returns a reference to an item, but that list was a
temporary. The list gets destroyed at the end of the statement (the
semi-colon), so we ended up keeping a reference to freed data (i.e., a
dangling pointer)
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This re-adds this code that got removed in a209dfbfd5 ("Multi dive
edit: don't change location texts until user saves the change")
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Otherwise the code loading a dive into the field would mark it as
changed.
This re-adds this code that got removed in a209dfbfd5 ("Multi dive
edit: don't change location texts until user saves the change")
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This still gets it wrong (i.e. marks things as edited when they are not or
not edited when they are) but at least they are no longer incorrectly
marked as incorrectly parsed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I cannot figure out how to get the hemisphere letters translated correctly
in qthelper.cpp. Short term hack for now - someone who understands how
this is supposed to work really needs to take a look.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
