Created a cross that follows the mouse on the dive planner,
this will help the user to know where it is placing the stop.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This fixes the creation of the poligon-based lines
next thing to do is to forbit creation of the next point
before the last one.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Better handling of the scene size for the dive plan,
The scene can be resized and a transform will be applied,
the handles will not resize however - they are 10x10px
and that's it.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This is still a bit bugged - the lines are going to the wrong
end - most probaly I messed something on the math. I'll now fix
the sizing issue then I'll try to make it behave in the proper
way.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Make double click work to put new items on the canvas.
Those items right now are QGraphicsEllipseItems, but
it will change to 'draggable' items.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added the first files and skeleton code for the visual
dive planner. now I need to fill things. The code is
using the print action borrowed, this will need to move
to a better choice in the future.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
If we don't have any manually set pressure data, show the data from the
samples instead. It uses an italic font for this case, mainly because I
couldn't figure out how to gray things out.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's just distracting. Leave it empty. No helium should be visually
very different from actual trimix, and for oxygen, zero means something
different anyway (it's air). In neither case is '0.0%' a good string to
show, just show it as empty.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes us use the same linear calculations as we did in the Gtk
branch. We don't take compressibility into account, since tank
manufacturers don't seem to either. A Luxfer AL80 is 11.1 liters, and
with the standard (non-compressibility) calculations, 80 cuft of air at
3000 psi is 11.094 liter, so that is the right model to use.
Also, stop with the horrible "units in edited numbers" stuff. It uses
up precious space, and doesn't look any better. If the user asked for
cuft, give him cuft without making a big deal about it.
Oh, and if the working pressure doesn't exist, sizes are always in
liters. That's what we did in the Gtk branch, that's what we do here.
Again, no reason to even bother stating units, it's not helping.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We do gas mixes in permille, not in percent. Some people really like
using the value they got from the analyzer, which is generally something
like 29.4% or whatever. So don't truncate percentages to integers.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since no one else approximates gas volumes at higher pressures, we
shouldn't do that either when converting imperial tank names (cuft @
working pressure) into wet volumes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I can't even begin to explain what got me to write this in the first
place. It makes no sense from any angle I look at it...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This sneaked into commit 9364436264.
It shouldn't be there.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make the entries for years bold, keep the months non-bold.
It's still a sea of data, but this is an improvement.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit fixes two issues. One is that there were situations where
the code would read an uninitialized parent pointer, the second was that
instead of the monthly statistics the tree view would show the yearly
statistics again under the yearly entries.
I assume that the second part of the fix (initializing the parent
pointers) actually takes care of both of them (that patch was suggested
by Tomaz), but the first part that just makes sure the pointer is at
least initialized to NULL seems to be at least not harmful, so I kept it
as well.
With this the yearly / monthly statistics seem to be pretty much at
feature parity.
Fixes: #115
Suggested-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Display the units in the header, make the header more consistent
looking, convert the values into the right units with appropriate
precision.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The compiler on MacOSX seems stricter than others:
qthelper.cpp: In destructor ‘DiveComputerList::~DiveComputerList()’:
qthelper.cpp:10: error: expected class-name before ‘(’ token
Fixed with help from http://stackoverflow.com/a/14777627/13365
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This data structure was quite fragile and made 'undo' when editing
rather hard to implement. So instead I decided to turn this into a
QMultiMap which seemed like the ideal data structure for it.
This map holds all the dive computer related data indexed by the model. As
QMultiMap it allows multiple entries per key (model string) and
disambiguates between them with the deviceId.
This commit turned out much larger than I wanted. But I didn't manage to
find a clean way to break it up and make the pieces make sense.
So this brings back the Ok / Cancel button for the dive computer edit
dialog. And it makes those two buttons actually do the right thing (which
is what started this whole process). For this to work we simply copy the
map to a working copy and do all edits on that one - and then copy that
over the 'real' map when we accept the changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Yearly stats are being displayed. the code is similar to the GTK one,
but I advise the reader that it's a bit risky ( I got an unreproducible
crash but it seems to be fixed now. ). The selection behavior is *weird*
and I have no idea why, but I'm very sleepy - will try to look at
it again tomorrow.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This simply creates a view to show the model, while doing that
I noticed that the model header wasn't showing, so I fixed it too.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This is the fisrt bunch of compilable code for the new Yearly Statistics
there's nothing to see here, move along...
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
So, I changed a lot of code to reduce boilerplate on models in the
future. Currently we do not have a lot of models, but this can increase
quite rapdly. There's a second TreeModel in the works, the Yearly
Statistics, this patch will save around 250 LOC for this new model,
and more and more models will give us a greater saving.
Iwll do that for the table models in the future too - I did the tree
models now because they are the most complex case and I didn't wanted
to create a second tree model without this.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
When doing the early port from the Gtk code to Qt this function was just
stubbed out. Now we are correctly filling the internal data structures
with ALL the dive computers that we see.
Instead of the silly dialog asking the user for a nickname we simply
create one from the deviceid. The user can then use the device name
editing dialog to create more intuitive nicknames.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code adds a Renumber Dialog, that's most a copy & paste
of the GTK visual, I didn't tried to do anything fance with it,
but I still dont like how it looks like. a better management
form is needed. :)
( Well, actually my dislike is mostly because it's on a menu
and it's on a popup, I think a 'toolbox' should exist to hold
all of those widgets that don't belong to the menu - will try
that later )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The old gtk branch started out with device_data_t explicitly cleared,
but the Qt version never did that. And we actually depend on the
deviceid in particular being initialized to zero (and then we fill in
the details in the divecomputer download callbacks)
Not properly initializing it meant that we ended up with random
deviceid's that got added to the divecomputer device lists, and then
saved to the XML file without actually matching the data in the dive
computers in the actual *dives*.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch saves / restores the sizes of the columns in the cylinders
and weigth table widgets, so everything is now properly behaved. There
's still other things to do - but I'm tired. i's sunday and there's a
protest against the brazilian government to go.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Removed the grid lines of the table views, this makes the table view
more similar with the dive list - I'm searching for an application
identity here.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Remove the vertical header on the cylinder and weigth edit,
It was strange to show, since we don't show a thing there.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Make the columns on Cylinders edit and Wheight Edit to
have sane values for 'type', this is needed because the
old behavior was to set it fixed size, and the default fixed
size was silly. this calculates a good predefined value
taking the font size in consideration.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Better handling of default sizes on the Cylinder and weight widgets,
the weigth widget didn't had a CSS applied so it looked odd compared
to the cylinder one, also the default behavior for the combobox delegate
didn't worked very well with the css applied, being too small.
this patch fixes that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The models were a bit messy - some of them got the correct font,
other didnt. This patch creates a new function 'defaultModelFont()'
that is being used to return the font in all cases now.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch creates a ComboBoxDelegate where the other specific delegates
should inherit from. this adds a little code cleanup for the current
version, and will help as soon as more delegates got added to the code.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The Qt branch didn't set the preexisting dive count, so matching old
dives didn't work and it always downloaded all of them.
Also, we need to autogroup dives before displaying them if autogrouping
is on.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While we still show the selected_dive in the profile and use it for Dive
Info and Equipment, in the Dive Notes tab we now show the trip location
and trip notes (and none of the other fields), if the user directly
selects a whole trip by clicking on the trip header.
This clever reuse of the widget now allows trip location and notes to be
edited in place.
As a side note: the Gtk version has long allowed the user to edit the
trip location and trip notes, but nowhere did it ever SHOW the trip
notes... so this is more than just feature parity...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For reasons I still don't understand, sometimes (but not always) when
clicking on a trip header we appear to get a select notification for the
trip and at the same time deselect notifications for every dive in the
trip. This seems wrong but I can't seem to figure out why it happens -
and of course it causes us to have a mixed up interpretation of what is
selected in our internal selection tracking.
Simply acting on the new selection after the newly deselected items are
handled appears to fix the issue, but I do worry about this change.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
