Since earlier have we had support for our own calculated TTS. This adds
support for holding TTS values reported by a dive computer.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This introduces a limiter that we only calculate deco stop, TTS and NDL
with a minimum of 30s intervall and just reused the values from the
previous sample in other cases.
I run my OSTC3 at 2s sample intervall so this is a 15x speedup in that
case.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Spin boxes for pO2 are now hooked up to preference values. Adding new
cylinders (or changing their fo2) computes the MOD accordin to the current
value of decopo2. Note that chaning the limits for deco pO2 does _not_
automatically update the switch depth of all cylinders as those might have
been manually entered.
Furthermore, MOD has now to option of rounding to multiples of a given
depth. That is used for the automatic switch depth which are now always
multiples of 3m (so that EAN50 is switched to at 21m rather than 22m).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Lets just use pO₂ instead of PO2, ppO2, ppO₂, PO₂.
They all mean the same, but it's better to be
consistent
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Strangely, *prinf() on Linux appears to do the right thing in either
order (my guess is based on the type of the two values?), but on Windows
things go badly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And fix the bug that in the info overlay SAC was always given in metric
values. And try to reduce the number of places in which we calculate the
unit conversions...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a lager step value when walking the calculations forward.
[Dirk Hohndel: this was sent ages ago and in all the discussions about the
implications I apparently never applied this]
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
[Dirk Hohndel: this was sent ages ago and in all the discussions about the
implications I apparently never applied this]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
1) All the variables in the sample structures are strongly typed
2) Two additional types were declared in units.h:
o2pressure_t
bearing_t
3) The following variables were added:
diluentpressure
o2setpoint
o2sensor[3]
4) Changes to a number of files were made to chanf
sample->po2 to sample->po2.mbar
bearing to bearring.degrees
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We should never pass permille values around as integers. And we shouldn't
have to decode the stupid value in more than one place.
This doesn't tackle all the places where we access O2 and He "too early"
and should instead keep passing around a gaxmix. But it's a first step.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When planning a dive, the dive could use more gas than is in the cylinder.
So getting a negative end pressure is a useful indication to the user that
there plan might not be a good one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We use mod calculations on multiple places, so make a separate helper
from it with proper types.
The "clumsiness" of defining a local variable to pass into the function
and out from it comes from the discrepancies in how c and c++ handles
initializations of variables in a struct.
Thanks goes to Tiago and Linus for pointing me in the right direction.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
C specs says that we can safelly free a NULL pointer, so there's no reason
to check if it's null before freeing it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
SAMPLE_EVENT_GASCHANGE2 is the libdivecomputer name of the event.
Compare with that instead of its int value.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This includes minimum pressure from manually added cylinders to be taken
into account on scaling. Without this, manually added cylinders might
lead to pressure dropping below the Y axis 0 line (e.g. when first
"computerized" cylinder is 220->140 and second, manually added cylinder,
200->50 bar).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
They happen - maybe the cylinder actually warmed up, or maybe the user
entered just a ending pressure without a starting pressure. Regardless,
just ignore cylinder pressure changes that go up.
Also ignore cylinders with a zero ending pressure: that's really a
*missing* pressure rather than an actual zero pressure. As Dirk says,
the scuba regulators don't even work without a healthy positive pressure
differential, so even when you breathe down a tank to "empty", it won't
be at zero pressure (this is true even with gauge pressure, where zero
means "atmospheric pressure").
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
-Renaming prefs members for consistency.
-Changing references of QSettings to the prefs structure instead.
-Removing unused functions in pref.h were left over from an old version.
-Changing the data-type of bool members to short for consistency with other members.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adds new push button "HR" to the button bar on the dive profile to
toggle display of heart rate.
TODO: New icon for the heart rate button is needed.
Fixes#485
Signed-off-by: Lakshman Anumolu <acrlakshman@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This needs to be tracked in the documentation as well.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The selection logic was a bit random: some places would return NULL if
the dive computer index was out of range, others would return the
primary dive computer, and actually moving between dive computers would
just blindly increment and decrement the number.
This always selects the primary computer if the index is out of bounds,
and makes sure we stay in bound when switching beteen dive computers
(but switching between dives can then turn an in-bound number into an
out-of-bounds one)
Fixes#464
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is just removal of dead code from the old profile, probably there's
still a bit more to remove, but this is a very good cleanup already.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We should never read cur_pr[cyl] if cyl isn't used during a dive - but for
cylinders that are used cur_pr[cyl] is initialized. But just to catch
errors elsewhere, let's not leave cur_pr[cyl] uninitialized.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
tissue_tolerance wasn't used after it was assigned.
type was overwritten after it was assigned.
serial was overwritten after the last /= 100.
event is assigned in the for loop.
clear isn't used after the assignment
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Minor change to the perl postprocessing script and resulting changes to
the affected source files.
This deals with two issues:
- "foreach"-like structures were not always treated correctly
- some longer calculations that ended on "+ constant" were reformatted in
a rather unatractive manner
In one source file (divelist.c) I ended up adding braces to the sources...
trying to cascade the indentation further down without having the block
there seemed a lot more trouble than it's worth.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I know everyone will hate it.
Go ahead. Complain. Call me names.
At least now things are consistent and reproducible.
If you want changes, have your complaint come with a patch to
scripts/whitespace.pl so that we can automate it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes the 'Zoomed Plot' a preference that can be stored and
retrieved, this way if the user sets the plot to be 'zoomed', this
information will persist even if they closed or opened subsurface again.
Also, added the 'Scale' button on the new profile, but didn't did the glue
code yet.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There should be a space between the colon and the value in the information
box in the profile. The vertical speed should have only one digit after
the decimal point.
Fixes#443
Signed-off-by: Andrey Zhdanov <andrjufka@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We use the plot_info as basis for our dataModel in the new profile. In
order to be able to place events at the right spot we need to have a
plot_info entry when the event happens. So let's add interpolated entries
not only based on time but also whenever there's an event between them.
This should address Robert's comment in commit 0474fe70fc ("New profile:
add image pixmaps for image events").
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will make no difference when we remove the old profile, but for now I
worry that this could cause us trouble.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
rint() is "round to nearest integer", and does a better job than +0.5
(followed by the implicit truncation inherent in integer casting). We
already used 'rint()' for values that could be negative (where +0.5 is
actively wrong), let's just make it consistent.
Of course, as is usual for the messy C math functions, it depends on the
current rounding mode. But the default round-to-nearest is what we want
and use, and the functions that explicitly always round to nearest
aren't standard enough to worry about.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
SAC should be calculated in relationship to surface pressure, not "1 bar".
I also realize that we have a few other cases where we do the same
mistake: the partial pressure calculations do things like
po2 = o2 / 1000.0 * depth_to_mbar(sample->depth.mm, dive);
which is wrong as well - the partial pressure is also relative to
standard atmospheric pressures.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The return value(structure) was not fully initialized, thus random data
returned for uninitialized members possibly causing random bahavior.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The profile info was generated using nasty string concatenation that the
membuffers are much better at anyway. And membuffers don't need those
arbitrarily sized fixed buffers (500 bytes? Why 500 bytes?).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
libdivecomputer already supports this, but we didn't save it.
Tested-by: Oscar Isoz <jan.oscar.isoz@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With this patch the tooltip is ready to work on the new profile, we just
need to actually use it.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Created a method to check if calculations should take place
taking into consideration what changed on the model. if the
model changes *everything*, them, all calculations should
be done, but if just some of the columns of the model are
changed, only those columns should trigger an visual update
on the items.
In theory this patch looks right, but something is wrong (
calculations are not being made. ), so I'll commit this any
how, and fix on the next commit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a better way since we can enable / disable the deco by changing
the preferences later, and that will not need to recalculate everything
just because a polygon was set to invisible.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit is rather big, and I forgot to cut it in pieces.
The first part creates a new 'calculate_gas_information' that will not
fill the profile_info->maxpp member ( that should be removed from it as
soon as the new dialog is finished ). The reason for that is that all of
the profile data will be calculated and the graph needs to update
dynamically, so whenever the settings changes, I ask for the model which
is the biggest graph and replot only the ones we need.
The second part adds a new animation function 'animdelete' to fade-out and
delete the item when it's done. the old function 'hide' did just that but
a hide shouldn't delete anything.
The third part is preferenes awareness for the PP graphs. I created two
new functions that receive the settings key for visibility and use the
QSettings to show / hide them. This also works quite well for the axis;
if no graph is visible, the axis will also hide itself.
The fourth part is colors. The pp graphs now have the correct colors.
And a bit of code cleanup too.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This version of the create plot info is the same as before, with the
difference that it doesn't depends on the gc.
Also fixed a crash.
The Pressure Index, Information and interpolated seems wrong,
I'm getting only zeroes.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Another futile attempt to cleanup the code and make coding style and
whitespace consistent. I tried to add a file that describes the key points
of our coding style. I have no illusions that this will help the least
bit...
This commit should ONLY change whitespace
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Created a new version of calculate_max_limits that doesn't have a
graphics_context and returns a plot_info. The code is basically the same
as the old calculate_max_limits, so there's not much to talk about.
The rest of the code is just boilerplate to plug the Profile
code with the axis and model stuff, to be plotted on screen.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This model encapsulates the plot_info struct and provides
a consistent way to show it using the Qt Model view system
in the C++ and QML way. For a QGraphicsItem that should show
a Profile, this is the start.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Earlier we converted the C++ code to using true/false, and this converts
the C code to using the same style.
We already depended on stdbool.h in subsurfacestartup.[ch], and we build
with -std=gnu99 so nobody could build subsurface without a c99 compiler.
[Dirk Hohndel: small change suggested by Thiago Macieira: don't include
stdbool.h for C++]
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Interpolated pressure should always be set, even it we didn't
calculate a new one. In this case we should just use the last one.
Signed-off-by:Rodrigo Severo <rodrigo@fabricadeideias.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When an interpolated segment is on the surface we get no pressure time -
and try to divide by zero.
(plus a small whitespace issue that slipped throught the cracks earlier)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The small straight parts at the end of tank pressure lines are more of a
aesthetic issue, not causing real harm so it is no reason to remove the
SURFACE_THRESHOLD test from pressure_time function only because of this.
Also improved interpolate data debuging, rearranged
get_pr_interpolate_data and removed an unused variable from
get_pr_interpolate_data. No real change here, just trying to make the code
clearer.
[Dirk Hohndel: clean up whitespace damage from this and the previous
commit]
Signed-off-by: Rodrigo Severo <rodrigo@fabricadeideias.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Interpolated lines for tank pressures were presenting discontinuities
(sudden drops) and stalls (horizontal lines) with certain dive profiles.
The main reason seems to be that the discrete interpolation of tank
pressure was adding small pressure increments that could be rounded down
or up repeatedly generating cumulative rounding errors that would mean
either a delay on pressure drop that would be drawn as a sudden drop or as
a premature pressure drop that would result in a flat line.
This patch changes the way the discrete interpolation is done, so that we
don't have cumulative rounding errors distorting tank pressure lines.
To calculate accumulated pressure_time values the get_pr_interpolate_data
function was created. The fact that get_pr_interpolate_data transverses
the beginning of the plot_info entry list for each entry that needs
interpolated tank pressure isn't optimal at all. There might be a way to
properly track the data necessary to interpolate tank pressures from
inside the main pi->entry loop in fill_missing_tank_pressures.
Unfortunately I didn't manage to do it inside fill_missing_tank_pressures
so we have get_pr_interpolate_data.
The SURFACE_THRESHOLD test from pressure_time function was also removed as
no matter how shallow the diver is, if he is using the cylinder to breathe
the cylinders tank pressure should be affected.
Signed-off-by: Rodrigo Severo <rodrigo@fabricadeideias.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These adds some ifdef's around some debug functions to disable them when
not using them.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
last_pressure is updated a couple of lines later, so no need to do it
here.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
NDL and TTS doesn't show up in the printed profiles, and it takes
significant time to calculate, so just don't do it.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While playing with the ruler, I figured that it happened only once that
my minimum speed was not 0 for a segment long enough to get any display.
And it was a "dive" in an hyperbaric chamber...
This patch replaces the minimum speed with the maximum descent speed and
the maximum speed with the maximum ascent speed.
Signed-off-by: Alexandre Belloni <alexandre.belloni@piout.net>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Don't calculate pressure-track for depth above SURFACE_THRESHOLD,
because then we would guess that were actually at surface breathing.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use get_cylinder_index that handles SAMPLE_EVENT_GASCHANGE and
SAMPLE_EVENT_GASCHANGE2.
This also removes the need for a special case where get_gasidx returns
-1, because get_cylinder_index always returns the "closest" gas that it
finds.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the Gtk version there were no option to disable the showing of time
in the mouse over, so this removes that option to limit the amount of
clutter in the settings panel.
This also renames the time and temperature to match the names they used
to have. T -> @, Temp -> T
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When reordering the info overlay content to make it jump around less,
somehow the SAC data got printed twice.
[Dirk Hohndel: rewrote incorrect commit message]
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Store the calculated values in separate variables in the plot_data
struct, and display them separate. This makes sure we don't confuse the
calculated values with the ones from a dc, and now we can compare the
two.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Break the huge calculate_deco_information into three different functions.
One for the current deco calculations, one for the ndl/tts/deco stop and
one for the gas calculations.
This makes it easier to disable/enable different functionality.
This also gets rid if the ccrdive state variable, and keeps that state
in the plot_data struct. Now we calculate the deco before we calculate
the gas properties, so if we have a po2, we're in ccr-mode, and if we
don't, we're in oc mode.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When moving along the plot, it's hard to look at a certain value when its
place in the info box moves due to values being added or removed above it.
This commit moves the "stable" values up top in the info box and the
values that come and go further down, so that the box expands downwards.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This changes the special handling of ndl calculations when we deem that we
are too shallow for doing them. Previously we just set ndl to -1 and
printed a "-", now we return and print max_ndl, just as how most
divecomputers work.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Let the user choose if the calculation of ndl and tts is worth the time
it takes.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will fill out the gaps of temperature data between all the points
so we always have a temperature to show in the info box.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Ruler was hard-coded to use seconds as speed unit. This makes it use
get_vertical_speed_units to switch between seconds and minutes.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is really nice to have when looking at specific parts of a dive.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
D as in depth, T as in time and not another T as in temp.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This may seem like a really odd change - but with this change the Qt tools
can correctly parse the C files (and qt-gui.cpp) and get the context for
the translatable strings right.
It's not super-pretty (I'll admit that _("string literal") is much easier
on the eye than translate("gettextFromC", "string literal") ) but I think
this will be the price of success.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I am not removing this but leaving it around as this is useful for a
feature that we still need to enable - the ability to filter out which
events to display. This existed in 3.1 but is missing in the Qt version.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- remove the build flags and libraries from the Makefile / Configure.mk
- remove the glib types (gboolean, gchar, gint64, gint)
- comment out / hack around gettext
- replace the glib file helper functions
- replace g_ascii_strtod
- replace g_build_filename
- use environment variables instead of g_get_home_dir() & g_get_user_name()
- comment out GPS string parsing (uses glib utf8 macros)
This needs massive cleanup, but it's a snapshot of what I have right now, in
case people want to look at it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some people (free divers) are loving ft/s or m/s units for vertical speeds.
Now they can choose between /min or /s in the configuration (only Qt UI).
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I ran subsurface with valgrind and it found a few errors.
[Dirk Hohndel: split this out from a much bigger patch that is still under
review]
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There is debate on this one, as free divers WANT the xx/sec values.
This needs to become flexible depending on whether you are in freedive
mode or not.
Fixes#202
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a ruler QGraphicsItem which can be dragged
along the profile. The ruler displays minimum, maximum and
average for depth and speed (ascent/descent rate). Also, all used
gas will be displayed.
This also adds a new attribute to struct plot_data to store the
speed (not just as velocity_t).
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
plot_data.o2 and plot_data.he was wrong for all dives, due to that
cylinderindex was set right first in populate_pressure_information, and
thus those two contained bogus information.
This makes the plot-text use cylinderindex-lookup as everything else.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is really nice to have when looking at specific coutures of a dive
or events.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Old gasswitch events only contains O2, so don't look at he part when
the event doesn't contain a He part.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Calculate TTS and NDL, and Deco stops when they don't already exist in
the samle and show them in the mouse-over.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When seeing that you have 0 min left, it looks kinda wierd, so rather
round up instead of down.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In calculate_deco_information we compute the ppo2 so we can graph it,
but if we send that ppo2 on to add_segment it will just reverse the
computation and introduce errors.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a feature that had been requested a few times in the past and when
debugging my "show only used gases" commit I realized that this would have
been extremely useful to have...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I think that displaying tissue loadings either as pressure or as
percentages is not very intuitive but that it makes much more sense when
translated to ceiling depths.
This change enables just that for the 16 tissues in our calculated ceiling
and visualizes this in the profile graph.
There is a checkbox in the preferences to turn this on. If enabled, all
tissues having non-trivial ceilings are also shown in the info box.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
After the 3.1 release it is time to shift the focus on the Qt effort - and
the best way to do this is to merge the changes in the Qt branch into
master.
Linus was extremely nice and did a merge for me. I decided to do my own
merge instead (which by accident actually based on a different version of
the Qt branch) and then used his merge to double check what I was doing.
I resolved a few things differently but overall what we did was very much
the same (and I say this with pride since Linus is a professional git
merger)
Here's his merge commit message:
This is a rough and tumble merge of the Qt branch into 'master',
trying to sort out the conflicts as best as I could.
There were two major kinds of conflicts:
- the Makefile changes, in particular the split of the single
Makefile into Rules.mk and Configure.mk, along with the obvious Qt
build changes themselves.
Those changes conflicted with some of the updates done in mainline
wrt "release" targets and some helper macros ($(NAME) etc).
Resolved by largely taking the Qt branch versions, and then editing
in the most obvious parts of the Makefile updates from mainline.
NOTE! The script/get_version shell script was made to just fail
silently on not finding a git repository, which avoided having to
take some particularly ugly Makefile changes.
- Various random updates in mainline to support things like dive tags.
The conflicts were mainly to the gtk GUI parts, which obviously
looked different afterwards. I fixed things up to look like the
newer code, but since the gtk files themselves are actually dead in
the Qt branch, this is largely irrelevant.
NOTE! This does *NOT* introduce the equivalent Qt functionality.
The fields are there in the code now, but there's no Qt UI for the
whole dive tag stuff etc.
This seems to compile for me (although I have to force
"QMAKE=qmake-qt4" on f19), and results in a Linux binary that seems to
work, but it is otherwise largely untested.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The selected dive was being set to zero when the program
started, but zero is actually the first dive. There
were workarounds on the gtk code for that probably
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The value of 0 that we used is actually a valid value and could cause
confusion.
Suggested-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Align statistics tab labels as per infotab.
Amend helper function to show degree symbol for temp measurements.
Change order of member initialisation list to match order of decl
(ProfileGraphicsView::ProfileGraphicsView)
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Plot the numbers on the left of the profile.
It seems that everythign is being plotted -
But I can see that there are coordinate-errors on the
code. ( the GTK one plots some curves below of the
dive, but the Qt one is overlapping - probably the
way that I'm using the gc information)
Need to investigate a bit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
