It's currently only used for the setting of the cylinder switching
depth, but now that one should work with user-specified units (so you
can set a max depth in feet even if you use metric, and vice versa).
In the future, if we also make the unit preferences something you can
pass in (with user preferences as a default argument value), we might
want to use this for parsing the XML too, so that we'd honor explicit
units in the XML strings. But the XML input unit preferences are not
necessarily at all the same as the user preferences, so that does
require us to extend the conversion functions to do possibly explicit
unit preference selection.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The C library doesn't use const char pointers for legacy reasons (and
because you *can* modify the string the end pointer points to), but
let's do it in our internal implementation just because it's a nice
guarantee to have.
We actually used to have a non-const end pointer and replace a decimal
comma with a decimal dot, but that was because we didn't have the fancy
"allow commas" flags. So by using our own strtod_flags() function, we
can now keep all the strings we parse read-only rather than modify them
as we parse them.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make it use 'weight_t' and hide the "grams" part inside the type. That
was the whole point of the weight_t type, after all. Returning a
"double" was always bogus, since we internally always do integer grams
(and the function actually used "rint()" to get all the rounding right
anyway).
As a result, it's now called "string_to_weight()".
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit c3fe1a9e9f ("Get rid of pointers to dive structures in the
UI") I was a bit too aggressive moving away from pointers to dives.
This is only needed for pointers that are held across operations that
could change the dive_table. I figured that it wouldn't hurt to get rid of
some more pointers as well, but it turns out I was wrong. The current dive
that we store in the Cylinder and Weight models can be a dive that isn't
in the dive_table at all: the multiEditEquipmentPlaceholder. And when
using the diveId we end up finding the original dive in the dive_table and
therefore modify the wrong structure.
This undoes two thirds of the above mentioned commit.
Reported-and-analyzed-by: Patrick Valsecchi <patrick@thus.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Turns out this function can be called when there is no valid dive - so
only protect those parts that dereference the dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The assumption that the pointer will keep pointing to a valid structure is
fundamentally flawed. And even if that is true today, it might change in
the future - just don't do it. Use the diveId instead.
The exception is when you own the structure and use it within one UI
interaction during which any way to change the dive_table is disabled
(e.g., while adding / editing a dive).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We have the wonderful Qt string functions. Let's use them to make the code
simpler and easier to read.
Suggested-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The imperial cylinder sizes are not just in cubic feet: they are in
cubic feet of gas at STP. So the imperial/metric difference is not
just about converting blindly from liters to cubic feet, you also have
to take the working pressure of the cylinder into account.
This was broken by commit f9b7c5dfe9 ("Make units in cells
consistant in CylindersModel"), because those poor sheltered Swedish
people have never had to work with the wondrous imperial cylinder
sizing, and think that units should make _sense_. Hah.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of always assuming that all numbers are in the users locale
weight units, allow the user to say "kg" or "lbs" explicitly.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Note that this is IMHO the wrong fix. Because we shouldn't just ignore the
units, we should do correct conversions.
Before this patch, if the user is in metric mode and then types in 4.5kg
or 10lbs for a weight, Subsurface ignores the entry and throws it away.
Very much not the expected behavior.
With this patch Subsurface will take the value, but ignore the unit and
assume that the user meant kg (since it's in metric mode). Still not
really the expected behavior for 10lbs (which is now 10kg), but if the
user typed 4.5kg (which admittedly is much more likely), then with this
change Subsurface will do the right thing.
Fixes#395
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The css was done by me in the first days of subsurface for Qt, and it
was a code that I was never proud of. Mostly because I tougth at the
time that it was better to write it into CSS than to create a new class
just to take care of the size of the default cell height on a tree view.
Now I see that it was a biased approach since it created issues on
dark color schemes and it also didn't make a 'native' experience on
Gnome or OSX, only on KDE.
This fixes that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On Windows platform translation/ folder contains Qt translation
files as well. This results in extra languages in preferences.
From now we filter these translations and choose only those matching
^subsurface_*.qm$
Fixes#339
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Show language instead of country, sort the list.
Show country in brackets to avoid ambiguity for locales like
de_DE and de_CH.
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt has a really strange API for directories. when you create a QDir
and set's the currentDir on *that* QDir you created, it's for the
whole application and not just for that variable. Then when the
variable is out of scope, the directory doesn't change back - ugh.
The solution is not to call setCurrentDir on the newly created QDir (which
was quite good since it's also a code cleanup. )
[Dirk Hohndel: modified to undo the far less elegant fix I had made in an
earlier commit]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These complete the ability to select languages from the preferences panel.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When the user first opens the application the default language is
selected; this can be changed to a hardcoded one by going to system
preferences and choosing the one you want.
Restart required.
Fixes#136
[Dirk Hohndel: whitespace fixes, removed qDebug() call, rephrased the
message displayed prompting the user to restart.]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We do not support rows larger than a single page as the
PrintLayout algorithm will enter an infinite loop,
therefore we put a limit of 15 lines for the location text.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- Removed the "Visible:" header on the column selector. It doesn't
have to be there, and it's not in the similar equipment column selector
- PO2 --> pO₂ (and others)
- Use same initial case in the units selector in preferences
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For the names that we have in our "default set" we need to store the
English name so Subsurface will "do the right thing" when opening the file
in a different locale.
With manually entered names in a local language there's not much we can
do.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Still trying to fix the same issue that I already tried to address in
commit e0b70b82ca ("Fix translation of weightsystem names") and before
in commit dc03b7e7d6 ("We need the correct context to translate event
names").
I missed the WeightModel. Hopefully this was indeed the real fix.
Fixes#312
(I know, I keep saying that)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is very much the same as in commit dc03b7e7d6 ("We need the correct
context to translate event names"). I didn't pay enough attention when
reading the bug report and missed that the weight system names were also
not correctly translated.
Fixes#312
(I hope this time for real)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Subsurface creates a lot of singleton instances on demand, but nothing
ever deleted them. Since they are singletons, these memory allocations
are technically not leaks. However, they clutter the output in valgrind
and other memory analysers, hiding the real issues.
The solution is to delete these items at exit. For the models and for
gettextFromC, the solution is to use a QScopedPointer, which will delete
its payload when it gets destroyed. For the dialogs and other widgets,
we can't do that: they need to be deleted before QApplication exits, so
we just set the parent in all of them to the main window.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When there are no trips at all, we have to skip the Yearly statistics
alltogether, including the header line (that should display all the
dives added together).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We now only use a slightly large font for the "Dive #" entry.
All other font sizes remain at 9px.
Another change is that we now attempt to use 11px for
individual row height. This makes the table at least 12px bigger
(n_rows * increment), but does not cut letters like 'g',
which go slightly bellow the font baseline.
Perhaps this can be improved later by adjusting the font
and row sizes again.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Use the same case for the first letter in the dive table column headers,
use '%' for both gases in the planner, and show "Start time" instead of
"Starttime".
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We update the values for divemaster, buddy and etc...
Rating and visibility are currently displayed as "x / 5"
values.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Following the new layout for the profile print, we separate
the used gas like so:
AL80 / EAN33 / ...
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
ProfilePrintPmode::truncateString() was not really needed,
because long text *should* be trunctated by the table itself.
Also we now are going to have multiple lines for notes,
so the auto-trim should work.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Previous show and save code would have aborted at the first invalid
weight system. This makes sure we save and show all weight systems up
until and including the last valid.
If we had:
integrated: 1kg
belt: 2kg
ankle: 3kg
And changed belt to 0 kg, we would have only saved integrated 1kg, and
nothing about the belt or the ankle weights. This will save all of them,
and show all of them.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previous code aborted at the first invalid cylinder. This instead finds
the last valid and prints all the ones up until that one.
Fixes#295
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds trip based statistics to the Yearly Statistics
view.
Signed-off-by: Miika Turkia <miika.turkia@nixu.fi>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I think we should actually fill the app with tooltips and
whatsthis hints. justsain ;p
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Better positioning of the text on the table cells. On KDE systems the
text got too near the line that divided the cells, this way the text is
placed on the middle of the cell.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a bit hacky and simply adds the title to the message text when
compiling on a Mac, but hopefully this will be enough.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Two errors fixed.
- With no location set, the summary line would start with a ','.
- When auto creating a trip for a manually added dive or when editing the
dates of dives in a trip, the timestamp for the trip was not updated
after editing the dive.
Fixes#293
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>