This introduces a csv file that contains the data from
the structs defined in profile.c, in particular all
deco information computed for the dive profle (including
NDL, TTS, ceilings, surface GFs etc).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The thumbnails were fetched in the background to achieve a
snappier UI. The problem with that is that on LaTeX etc.
export only placeholder thumbnails were shown.
Therefore, implement a synchronous mode. This only tries
to fetch cached thumbnails or calculate thumbnails for
images. Videos and remote files are not supported.
Fixes#1963
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
With Facebook support gone, we should offer a way to export
the profile image. This has been part of the TeX support
but this makes it explicit.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This was missing in the export. We export separate hour and
minutes so the template can decide about the time format.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This makes it more like the plain TeX export, the main change
is in the structure of the template file (not included here).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
So far, the TeX export was intended to be used with plain TeX.
To make it compatible with LaTeX, we only need to make sure
there are no macro name clashes and remove plain TeX specific
calls.
So far, this works only for single dives as the export only
sets up macros to contain dive data and then read the actual
latex file (starting with \documentclass etc). Later, the
template should setup macros to be called from the export
file.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Replace the UUID reference of struct dive by a pointer to dive_site.
This commit is rather large in lines, but nevertheless quite simple
since most of the UUID->pointer work was done in previous commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of having people treat latitude and longitude as separate
things, just add a 'location_t' data structure that contains both.
Almost all cases want to always act on them together.
This is really just prep-work for adding a few more locations that we
track: I want to add a entry/exit location to each dive (independent of
the dive site) because of how the Garmin Descent gives us the
information (and hopefully, some day, other dive computers too).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The keeps track of different sub widgets needed by other parts
of the code, notably:
MainTab
PlannerDetails
PlannerSettingsWidget
ProfileWidget2
DivePlannerWidget
DiveListView
Access to these widgets was provided with accessor functions.
Now these functions were very weird: instead of simply returning
pointers that were stored in the class, they accessed a data
structure which describes the different application states.
But this data structure was "duck-typed", so there was an
implicit agreement at which position the pointers to the
widgets were put inside. The widgets were then down-cast by
the accessor functions. This might make sense if the individual
widgets could for some reason be replaced by other widgets
[dynamic plugins?], but even then it would be strange, as one
would expect to get a pointer to some base class.
Therefore, directly store the properly typed pointers to the
widgets and simply remove the accessor functions. Why bother?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a checkbox that triggers replacement of all English characters by
x's in notes, buddy, dive guide and (while we are at it) suit.
This is ment for people sharing logs for debugging that are concious
about privacy issues. It leaves the lenth of strings in tact as well
as special charcters as those might be needed to track down a particular
parsing problem.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
get_units() returns a pointer to the units struct in the preferences.
Callers should not modify the preferences via this struct, therefore
make the return value point to const.
This is a small step in constifying the global preferences structure.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In a previous commit, the get_gasmix_* functions were changed to
return by value. For consistency, also pass gasmix by value.
Note that on common 64-bit platforms struct gasmix is the size
of a pointer [2 * 32 bit vs. 64 bit] and therefore uses the
same space on the stack. On 32-bit platforms, the stack use
is probably doubled, but in return a dereference is avoided.
Supporting arbitrary gas-mixes (H2, Ar, ...) will be such an
invasive change that going back to pointers is probably the
least of our worries.
This commit is a step in const-ifying input parameters (passing
by value is the ultimate way of signaling that the input parameter
will not be changed [unless there are references to said parameter]).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace constructs of the kind
s.toUtf8().data(),
s.toUtf8().constData(),
s.toLocal8Bit().data(),
s.toLocal8Bit.constData() or
qUtf8Printable(s)
by
qPrintable(s).
This is concise, consistent and - in principle - more performant than
the .data() versions.
Sadly, owing to a suboptimal implementation, qPrintable(s) currently
is a pessimization compared to s.toUtf8().data(). A fix is scheduled for
new Qt versions: https://codereview.qt-project.org/#/c/221331/
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Internal floating point (FP) calculations should be performed using double
unless there is a very good reason. This avoids headaches with conversions.
Indeed, the vast majority of FP calculations were already done using double.
This patch adapts most remaining calculations. Not converted where things
that were based on binary representations and variables which weren't used
anyway.
An analysis of all instances follows:
core/plannernotes.c, l.404:
This was a comparison between two floats. On the left side, first an integer
was cast to float then multiplied with and integer and divided by a constant
double. The right hand side was an integer cast to a float. Simply divide by
1000.0 first to convert to double and continue with calculations. On the right
hand side, remove the cast, because the integer will be implicitely cast to
double for comparison. This conversion actually emits less instructions,
because no conversion to double and back is performed.
core/planner.c, l.613:
Same analysis as previous case.
subsurface-desktop-main.cpp, l.155:
A local variable representing the version OpenGL version. Turn this into
integer logic. Not only does this avoid dreaded FP rounding issues, it also
works correctly for minor version > 10 (not that such a thing is to be
expected anytime soon).
abstractpreferenceswidget.[h/cpp]:
A widget where the position is described as a float. Turn into double.
desktop-widgets/divelogexportdialog.cpp, l.313:
total_weight is described as float. Use double arithmetics instead. This
instance fixes a truncation warning emitted by gcc.
Before, we did not look at the path of the filename to export
to but we should write the images there and not in pwd.
Fixes#931
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Don't change into a directory just to see if it exists.
Remove unnecessary braces of one of the changed if statements.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Correct spelling and typos in file filters.
Unify and translate file filter names.
Don't pass a file filter to a directory open dialog - not needed.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
These two variables are calculated later in the function and the
same two lines of code are there again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Include the gasname, get rid of more spaces in front of units,
update the template to use new gas fields.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This way, the user can adopt those once and for all for all
her dives. This includes the space between number and unit symbol.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Removed some merge artefacts and made sure code compiles and
produces wellformed TeX. Shortend some comments.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The purpose of this work is to allow for generation of more complete log
pages using TeX/LaTeX.
Previously, the exporting to TeX generated a document that contained
very limited information about the dive. For example: the only details
reported about air consumption were delta pressure and SAC. In addition
no data was reported about what equipment (weights, tanks, suit) was
used.
Per feedback, code was updated to use helper functions, and now exports
data with the units set by the user in the Subsurface preferences. Some
characters (Degree symbol) do not render correctly by default in LaTeX,
so sample code to address this was included in the top comments. Volume
units do not export an ideal character string, so another string was
substituted.
This update adds the following information:
* GPS Location
* Dive computer used
* Max, Min, Air, and Water Temperatures
* Average depth
* Number of cylinders listed, mix, and start/end pressure for each
* Total weight used, and the description and quantity of each weight
* Dive rating (previously, only visibility was reported)
* Buddy
* Dive master
* Suit
This update moved several fields that had no output or had unexpected
names (i.e. "spot", "place") into a "Deprecated section"
Future work:
* The export currently only includes the first entry in the tag list.
* Future versions should export all tags.
* Ideally, this would export a screenshot of the dive location.
* Create a table of correct size for weights and cylinders.
* It would be nice to have a bit more control over the generation of
profile images, but that may be beyond me.
Rebased-and-cleaned-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Ben McCandless <mccand@gmail.com>
This is a bit ugly since it does a regexp match on
divesite.notes but what can I do...
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This does the basic export as a TeX file including a template.
It still lacks proper location parsing.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Having subsurface-core as a directory name really messes with
autocomplete and is obviously redundant. Simmilarly, qt-mobile caused an
autocomplete conflict and also was inconsistent with the desktop-widget
name for the directory containing the "other" UI.
And while cleaning up the resulting change in the path name for include
files, I decided to clean up those even more to make them consistent
overall.
This could have been handled in more commits, but since this requires a
make clean before the build, it seemed more sensible to do it all in one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we have now destkop and mobile versions, 'qt-ui' was a very
poor name choice for a folder that contains only destkop-enabled
widgets.
Also, move the graphicsview-common.h/cpp to subsurface-core because
it doesn't depend on qgraphicsview, it merely implements all the
colors that we use throughout Subsurface, and we will use colors on both
desktop and mobile versions
Same thing applies for metrics.h/cpp
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-10-30 10:36:49 -07:00
Renamed from qt-ui/divelogexportdialog.cpp (Browse further)
