This hacks the libzip build to not try to find zlib, because it fails
doing so on modern NDK. We just tell it that its there, and be done with
it.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Not everybody have their build dir in the same place, but we can always
find the files relative each other.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
So even setups relying on the wrapper script can do faster rebuilds.
This also cleans up a bug that made passing through the release
parameter fail in the past, and removes overly verbose debugging output.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is working around a Qt Bug https://bugreports.qt.io/browse/QTBUG-69494
which prevents correct rendering of the OnePlus fonts.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Simply move that export to the top of the file with the others.
Suggested-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With all upgrading, the build apks now show up in a slightly different
location. Correct this in the scripting. Notice that this is debug
building only. Release building is outside the repo.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is squashed commit consisting of a number of subjects, all intended
to get our app to build, link and run on device, but as the steps are
small (but non-trivial), I document them in this one commit.
1) Do not use OpenSSLs install targets, but simply copy the wanted build
artifacts manually. The main reason for this, is that the install
targets want to install a lot more than we build, so it also builds
parts of the OpenSSL suite that we will never use.
2) As Android does not like shared libraries with embedded versioning
(and the used androiddeployqt actively prevents adding versioned
libraries to the build), strip all this data from the generated shared
libraries. This trick was already there, but its adapted to all possible
conflicts.
3) The OpenSSL config script seems rather broken, resulted in failed
builds, and calling the underlying Configure is simpler.
4) Finally, parts of the OpenSSL code uses stdio things like stdout,
stderr, etc. These showed up as undeclared external on build time. Well,
luckily, there was an easy way out using 2 -D(efines). This feels hacky,
but does the job (and we are not interested in the output of OpenSSL in
our app).
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The main reason for upgrading of the Qt version is the hunt for a broken
BT/BLE stack, preventing downloads from BT/BLE enabled DCs, in relation
to arm64 architecture builds. (And the absolute need for an arm64 build
in relation to the publication of the Android app in Googles Play
store).
In addition, Qt 5.12.4 starts supporting OpenSSL 1.1.1c, and trying to
use our current OpenSSL 1.0 series is highly discouraged by Qt (and
OpenSSL itself).
So, upgrade both in unison. But ... be careful bisecting issues on this
commit, as it does break our build. That will be fixed in the next
commit.
This fixes the BT/BLE download for arm64!
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This should fix the current Travis build failures for Android.
It is odd how we have ANDROID_PLATFORM and ANDROID_PLATFORMS,
buf for now all I care about is that the Travis build completes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fix makes no difference from usage of this script in Travis
context, as every build starts from a clean VM, but the very few
developers that build for Android locally, and that want to use the new
style docker container builds as well, things are broken.
libdivecomputer has build artifacts in its source tree (and that source
tree is shared between local and docker run). So it happens that
libdivecomputer is configured locally, and afterwards fails to build
in docker build as its already configured, but not for the docker
image its now running in.
The fix is simple. Always reconfigure libdivecomputer when using this
script.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
So we don't need the pre-built binaries anymore, and we don't need the
travis_wait hack anymore for potentially slow downloads as that is all
installed in the container already.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This had to be embedded in the build process (or better, solved for
real).
Using Cmake, Clang, NDK 18b, Qt 5.12 beta 4, some Subsurface code does
not compile. At this point in time, its fully unclear to me why we see the
error as it is.
Thing fail deep down in Qt and NDK headers on #include <cmath>. Error like
"::signbit is not in the global namespace". The most logic reason is an
improper order in which include paths are constructed in the build process.
Any attempt to find the real reason failed. Even very similar command lines
from a qmake build that succeed fail with a cmake style build.
The very very dirty hack is commenting out some lines in NDK 18b:
"./android-ndk-r18b/sources/cxx-stl/llvm-libc++/include/cmath
Comment lines 313-325, and all build, links and runs with no errors
related to this known at this point.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
make sure that all lib code is compiled with -fPIC as things will not
link due to error "requires unsupported dynamic reloc R_ARM_REL32" (for
arm build).
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
On very clean builds not using the wrapper script, the compile of libzip
simply fails because it depend on openssl include files. Simply swap them
around.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Mysteriously, openssl does not compile with clang with a
sha256-armv4.S:2638:2: error: invalid instruction, did you mean: adr?
The easiest way out is compiling without no_asm. This obviously lowers
the bandwidth on the SSL link (as the asm code is there for performance
reasons), but it has no visible performance loss in my tests.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
With a preparation done in the 4 commits before, now add the arm64 and
use clang instead of gcc as compiler infrastructure.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Very annoyingly, openssl is re-build and downloaded numerous times
when doing partial builds. Reason for this, is that the original checked
out git repo is moved away, and build in source (as openssl does ...).
So, this simple change leaves the checked out repo in place, and
copies the tree to build in.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
A subtle one. When compiling for arm64, libzip is the only package we
use in mobile that installs its product in lib64. There is no reason for
this given the way our build process is. So, simply force the library to
reside in lib, independent if we are building arm or arm64
architectures.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Simple cleanup. Do not hard code armv7 as we have QT_ARCH. This
allows, in the future, for arm64 builds as well.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Hard coding desired ANDROID_PLATFORM on multiple places is simply bad.
Fix this. Further, set the variables to a much newer state.
CAVEAT: this will likely break android build, so be careful on
bisecting. All fixed in next, related commits.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Make sure all required Android SDK components are explicitly installed
before starting the actual build.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
With commit 0d8fc7ef970e of qt-android-cmake, the buildtools version
is automatically detected. So do not try to pass it any more, as
this breaks the build.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
That's the minimum platform that we have used for a while now,
corresponding to Android 4.1 and newer (i.e., quite ancient).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This indents the code that is only executed when we aren't in 'quick'
mode. git show -w will show that there is no code change in this commit.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows us to skip all the checking / building of dependency
libraries. This also allows us to pass extra arguments to the make
command by separating them from the arguments to build.sh with '--'.
This commit is easier to understand because it didn't increase the
indent in the large block of code that is now only executed if we aren't
in 'quick' mode. That will be fixed in the next commit that is
whitespace only.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Switching to GitHub as source for libzip means that we need to encode
the version number differently. Newer versions of libzip don't compile
cleanly on Android and this one seems new enough.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The versions for openSSL in variables.sh and get-dep-lib.sh needs to match or we end up recloning the repo on every build.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Add a comment to the variables.sh file so we don't forget to update
qt version in the qt-installer-nontineractive file as well.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Instead of dealing with the challenges of downloading and installing the
official package (which really prefers to be run interactively and
frequently caused Travis failures) we get the pre-packed bits from our
cache instead. Less data to transfer, quicker install.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Update the scripts used to build subsurface-mobile for
andriod to use the variables file.
Removed checks for obsolete Qt versions.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
This adds a file that contains the variables used in
the android-build-wrapper and build scripts.
This gives a single location for setting which versions
of Qt, NDK and SDK we use when building the mobile app on linux.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
But simply ignore when building outside of Travis.
Of course since we are building Android in a container, we need to first pass
the environment variable to the container...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And replace it with something that works on a modern cmake.
The upside with using the right linker, we get the symbols resolved
correctly so we don't need to regex the code.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Since about a year ago qt-android-cmake shifted to using gradle instead
of ant, and the android sdk's stopped supporting ant to.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
This simplifies the code and uses correct quoting for variables.
This also fixes the sha1-stampfile handling so that we don't build
libdivecomputer every time.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
This reworks the googlemaps build to be more like the other builds, with
the same pattern and way of detecting what we need to do, and when we
need to rebuild it.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
We already have a variable pointing to the source dir for subsurface, so
use it.
This way we can build out of tree, in any directory.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
The xmlsoft.org links sometimes time out. Sadly, GitHub API gives us an
oddly named top level directory in the tar file, so lets strip that and
replace it with the "usual" name.
Also, for the "raw" tar files from GitHub we need to run autoreconf
ourselves.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
At least, now the Travis builds use the same Qt version as the
production builds from Dirk that go to the AppStores.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
For some reason it suddenly cannot figure out which build program
to use. This seems like a weird hack, but works.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since it's the SDK where things are failing, doing it this way makes the
turnaround time of my attempts to fix this faster. And in the larger
scheme of things, the order is irrelevant.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I clearly had forgotten to update the Android specific scripts when
adding the libdivecomputer submodule.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Back in 6451adfec1, the path to the qt
binaries was changed. The current binaries are back on the old urls, so
this reverts half of 6451adfec1.
The other half is still true.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
This increases BUILDNR in a way that keeps exit status as zero, so the
script doesn't abort due to set -e.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Just to be sure. Use the same version on Android build of libgit2
as used in the scripts/build.sh script.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
In general this patch enables building of subsurface without being
forced to use the official Qt binary packages. This is particularly helpful
when having to debug Qt internals or having to deal with custom patches
on top of the official Qt releases.
The architecture dependent file path layout is only employed by official
Qt binary packages. They are the result of a reordering at package
generation time. If Qt was build for a single architecture, the standard
layout does not add the architecture specific top level patch for the resulting
binaries.
Signed-off-by: Alex Blasche <alexander.blasche@qt.io>
It seems that the Qt team deviated from their previous practice to keep
the Qt/x.y directory structure the same for all minor releases - so now
it is indeed Qt/5.9.1
Oh well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I don't quite understand why this isn't correctly substituted to lrand48()
by the header file, but patching it in the source is easy enough.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The used cmake toolkit for building the Android Subsurface-mobile app
(qt-android-cmake) recently moved away from compiling with Ant in favor
of Gradle. The most recent Android SDK will not support Ant any more.
This calls for the addition of the Android SDK BUILDTOOLS_REVISION define
to the cmake of Subsurface-mobile. Without this, the build will fail.
The value has to be set to an existing directory in
.../android-sdk/build-tools/
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Just an update of comment. The stange issue with Qt5.7.1 is
still present in Qt5.8. Extend the comment accordingly.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Because `[ "$foo" != "" ] is equivalent to `[ "$foo" ]'
in all POSIX shells.
Signed-off-by: Cristian Ionescu-Idbohrn <cristian.ionescu-idbohrn@axis.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
