This one is a bit more tricky. There are two modes: set dive site
and set newly created dive site. This is realized using an OO model
with derived classed. Quite convoluted - but it seems to work.
Moreover, editing a dive site is not simply setting a value,
but the list of dives in a dive site has to be kept up to date.
Finally, we have to inform the dive site list of the changed
number of dives. Therefore add a new signal diveSiteDivesChanged.
To send only one signal per dive site, hook into the undo() and
redo() functions and call the functions of the base class there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is different from the other editing commands, because
date and time editing may change the order of the dive list.
Therefore, this uses an already implemented dive list command.
The command is extended to send a divesEdited() signal.
This signal and the divesChanged() signal, which is used by
the dive list, will be unified in a later commit.
Update of the graphics is now not done via signals, a direct
call is performed in MainTab::divesEdited(). This simplifies
things.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Mostly trivial. Since now on editing the field is re-set, the
validation function becomes unnecessary.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was rather trivial and modeled after the previous edit
UndoCommands. Since this is the first time we're editing
integers a new constructor instantiation had to be added.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This one was trivially modelled after notes editing. Only difference:
the textChanged() signal was replaced by the editingFinished()
signal so that we're not generating undo-commands on every key-press.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a new UndoCommand for dive mode editing. This one is a bit
special, as the mode is associated with a dive computer (DC),
not a dive. Thus the edit command has an additional parameter,
viz. the index of the DC.
This does not fit properly to the EditBase class, as this class
isn't aware of additional parameters and therefore this parameter
is not sent via signals. At the moment this doesn't matter. In
any case, the semantics of editing are weird and therefore let's
do the simple thing (derive from EditBase) and let's see what
the future brings.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To keep the UI in a consistent state, update the notes field if
it is changed by an undo command. To that purpose, add a new
signal to diveListNotifier with a list of dives and a field-id
as payload.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Implement a first rudimentary dive-editing command. The main code
resides in a base class Command::Edit, which calls virtual functions
to read / set the fields and extract the field name.
Implement an example: editing of dive notes.
This dose not yet update the UI on undo / redo.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a "purge unused dive sites" button to the dive site list.
Connect it to a new PurgeUnusedDiveSites command. Implementation
was trivial: simply copy the DeleteDiveSites command.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Stretch the name and description columns in the dive site table,
so that they don't start too small. This should only be a temporary
solution, as it disables the save column width to preferences
feature of TableView.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The edit dive site button was connected to a *signal* of MainWindow,
which was connected to a slot of MainWindow. Remove the unnecessary
intermediate signal.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Simply copy the code of note editing. It's a bit more complex,
since we have to parse the Gps coordinates. For consitency,
rename the COORD field to LOCATION (the field in the dive_site
struct is called LOCATION).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, the notes field uses a QTextEdit, which doesn't
send a signal if it goes out of focus. But for undo of
dive-editing we don't want to create an undo object for
*every* text change.
Thus, create a custom TextEdit widget that derives from
QTextEdit and turns the focusOutEvent into a editingFinished
signal.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If the name of a dive site is edited, it might wander somewhere
else in the table and thus out of view. Hook into the "dive site
changed" signal and scroll there.
The code is rather subtle as it depends on signals being called
in a certain order: First the item is moved in the model, only
then can we scroll to the correct place.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When adding a dive site, enter the name field of the new dive site.
Thus, when adding a new dive site, the user can immediately edit the
name.
The code is rather subtle: It hooks into the dive site added signal
before executing the command and unhooks afterwards. This only works,
because signals are executed in order of connect - thus the model
adds the index first and only *then* is the field edited.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Implement a dive site addition undo command and connect it to
the add dive site button. The added dive site has a default
name ("new dive site").
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This feature will be replaced by.
1) An explicit purge empty dive sites feature.
2) Not allocating dummy dive sites for GPS coordinates.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The LocationInformationModel used to sort its entries and was completely
rebuilt after every change. This makes it rather complex to support
incremental changes.
Instead, keep LocationInformationModel sorted by UUID so that indexes
are consistent with indices in the core dive site table.
Implement sorting by other columns than name and enable sorting in the
dive site view.
Finally, don't cache the list of dive site names for the mobile app,
since that would also need some rather convoluted methods of keeping
the list up to date. Calculate it on the fly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a very simple tab-widget presenting the list of known dive sites.
The table is rendered using our custom "TableView".
The (mis)uses the "LocationInformationModel". It moves the items
to be displayed (delete, name, description, number of dives) to the
front and makes the others hidden.
Moreover, it was necessary to limit the geo-tag decoration role to
the name to avoid having the icon next to each column.
Make the trash-can icon active and the name and description editable.
This is modelled after the cylinders-table code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of setting dive->dive_site directly, call the
add_dive_to_dive_site() and unregister_dive_from_dive_site()
functions. In the parser this turned out to be a bit tricky.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since the UUID will be overwritten on save and is only used on save
and load, set it only on save or load. For other created dive sites,
leave the UUID field uninitialized.
This means that the UUID will change between saves. Let's see how
the git saver handles that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When a new dive site is created in MainTab::updateDiveSite()
and there is no text, it gets a generic name. But: the function
exits early if there is no text, so this is dead code. Remove.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To enable undo of dive site functions, it is crucial to work
with different dive site tables. Therefore add a dive site table
parameter to dive site functions. For now, always pass the global
dive site table. Thus, this commit shouldn't alter any functionality.
After this change, a simple search for dive_site_table reveals all
places where the global dive site table is accessed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
-return the result instead of storing in a parameter, we now know that the list
contains only those results that are generated in the function
-allocate the result with the correct length right from the start
-do not iterate over keys of a map and then do a map lookup to get the value but
use an iterator that gives us both right from the start
-remove one call alltogether as the results were not used there
Signed-off-by: Rolf Eike Beer <eike@sf-mail.de>
See https://www.kdab.com/goodbye-q_foreach/
This is reduced to the places where the container is const or can be made const
without the need to always introduce an extra variable. Sadly qAsConst (Qt 5.7)
and std::as_const (C++17) are not available in all supported setups.
Also do some minor cleanups along the way.
Signed-off-by: Rolf Eike Beer <eike@sf-mail.de>
printGPSCoords() returned a newly allocated C-style string. Most
callers simply made a QString out of it and freed the C-style string.
This is paradoxical, as printGPSCoords internally works with QStrings
and converts them to C-style on return.
Therefore, let printGPSCoords() return a QString and create a
printGPSCoordsC() wrapper for the two C-callers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The printGPSCoords() function returns a copied C-style string. Since
the owndership is transferred to the caller, the correct return type
is "char *" instead of "const char *".
Thus a number of casts when calling free can be removed.
Moreover a number of callers didn't free the string and thus were
leaking memory. Fix them. Ultimately we might want two versions
of the function: one for QString, one for C-style strings.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The undo-work reversed the direction of the offset. This was apparently
only fixed when using the menu entry, but not when editing dives directly.
Invert the offset to get the correct time.
While doing so, remove a redundant if: First it checked whether the
dates are the same, then whether the offset is non-zero.
Fixes#1975.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In MainTab::acceptChanges there was a "editMode != ADD" condition
inside a else block to "editMode == ADD", which is therefore
redundant. Remove.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The when field gives the time of the first dive. Instead of keeping
this field in sync, replace it by a function that determines the time
of the first dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveListView code had a very fundamental problem with its
header: Each had its own idea of who is responsible for sorting.
Since we can't easily change QHeaderView, accept QHeaderView
as the authority on sort-column and order.
To make this possible, split the reload() function in two
distinct functions:
- reload() reloads the model and sorts according to the
current sort criterion.
- setSortOrder() tells the header to display a certain
sort criterion. If this is a new criterion, it will then
emit a signal. In this signal, resort according to that
criterion.
Thus, the actual sorting code has to be moved from the
headerClicked() to a new sortIndicatorChanged() slot.
Morover, the sorting of the QHeaderView has to be used.
Reported-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
DiveListView::reload() was called for full reset of the dive list
and for changing the view (tree vs. lis) in DiveListView::headerClicked().
Since the latter does sorting by itself, a parameter "forceSort" was
introduced, which defaulted to true, but was set to false by
DiveListView::headerClicked().
To remove complexity, simply let DiveListView::headerClicked() set
the view by itself and remove tha parameter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Import dives from a DC, and have ssrf started in verbose mode. After
downloading dives, hit ok, to add them to the dive list. This crashes
as we cannot get the uuid from the null dive site.
Added a simple guard to fix this.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Replace the UUID reference of struct dive by a pointer to dive_site.
This commit is rather large in lines, but nevertheless quite simple
since most of the UUID->pointer work was done in previous commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace UUIDs from LocationInformationModel and fix the fallout.
Notably, replace the UUID "column" by a DIVESITE "column".
Getting pointers through Qt's QVariant is horrible, we'll have
to think about a better solution.
RECENTLY_ADDED_DIVESITE now defines to a special pointer to
struct dive_site (defined as ~0).
This fixes an interesting logic bug:
The old code checked the uuid of the LocationInformationModel (currUuid)
for the value "1", which corresponded to RECENTLY_ADDED_DIVESITE.
If equal, currType would be set to NEW_DIVE_SITE. Later, _currType_
was compared against _RECENTLY_ADDED_DIVESITE_. This would only work
because NEW_DIVE_SITE and RECENTLY_ADDED_DIVESITE both were defined
as 1.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of passing a uuid, pass a pointer to the dive site.
This is small step in an effort to remove uuids.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of passing a uuid, pass a pointer to the dive site.
This is small step in an effort to remove uuids.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This changes more of the dive-site interface to return pointers
instead of UUIDs. Currently, most call sites directly extract
UUIDs afterwards. Ultimately, the UUIDs will be generally replaced
by pointers, which will then simplify these callers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This will display the dive site coordinates after the Location label if
there are no associated tags from reverse geolookup. Thus it'll be
clearer for users that we do have GPS location stored for the dive, and
might be able to see more easily if the recorded coordinates are
correct.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
There was still code in MainTab::updateDiveSite() related to
dive-sites obtained from the obsolete web-service. Remove.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of having people treat latitude and longitude as separate
things, just add a 'location_t' data structure that contains both.
Almost all cases want to always act on them together.
This is really just prep-work for adding a few more locations that we
track: I want to add a entry/exit location to each dive (independent of
the dive site) because of how the Garmin Descent gives us the
information (and hopefully, some day, other dive computers too).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of the weirdly named "information" and the inconsistent
"dive_list" use the logical "mainTab" and the camel-cased
"diveList", respectively.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The keeps track of different sub widgets needed by other parts
of the code, notably:
MainTab
PlannerDetails
PlannerSettingsWidget
ProfileWidget2
DivePlannerWidget
DiveListView
Access to these widgets was provided with accessor functions.
Now these functions were very weird: instead of simply returning
pointers that were stored in the class, they accessed a data
structure which describes the different application states.
But this data structure was "duck-typed", so there was an
implicit agreement at which position the pointers to the
widgets were put inside. The widgets were then down-cast by
the accessor functions. This might make sense if the individual
widgets could for some reason be replaced by other widgets
[dynamic plugins?], but even then it would be strange, as one
would expect to get a pointer to some base class.
Therefore, directly store the properly typed pointers to the
widgets and simply remove the accessor functions. Why bother?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive-site-edit widget uses a copy of the to-be-edited site
to compare with old values. Generally, this seems overkill
(the original dive-site can be used for such a comparison).
But one place where it can't simply be removed is the taxonomy,
because the widget needs a place to store the unsaved data.
Change the code to use an explicit taxonomy structure instead
of the one provided in the copy. This should ultimately allow
removal of the latter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The global object "displayed_dive_site" is used to store the
old dive site data for the edit-dive-site widget. The fields
of the widget were initialized from this object in the show
event. Therefore the object was updated in numerous parts of
the code to make sure that it was up-to-date. Instead, move
the initialization of the object to the function that also
initiatlizes the fields. Call this function explicitly before
showing the widget.
This makes the data-fow distinctly easier to understand.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Remove a comment which is outdated in two ways:
1) The global variable "displayed_dive_site" was not used at all.
2) The location box cannot be used to rename dive sites.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
MainTab::refreshDisplayedDiveSite() was used after dive-site edit
to update the information of the location entry box. This should
always display the dive-site of the currently shown/edited dive,
therefore it makes no sense to use the displayed_dive_site here.
Simply use the dive site of displayed_dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old code had a special case for dive-editing mode:
The dive site uuid of displayed_dive_site instead of displayed_dive
was used.
This makes no sense, because displayed_dive_site is only used by
the dive-site-edit widget, which firstly cannot be activated
during dive-edit and secondly doesn't change the dive site id
anyway.
Thus, use the dive site of the currently edited/displayed dive
in all cases.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Separated from the previous commit as I do not like big whitespace
changes in a small functional commit.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
While trying to understand more of the big change from PR 1528,
I found that the divelist was marked changed while it was not
changed at all. Reason is simple. The MODIFY_DIVES code assumes
its called only for truly changed data. But in case of saving
tagged strings, it was not.
This fixes this. And I do not believe this has any visual effects.
Further, the now broken indentation is fixed seperately.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Fetching the taxonomy from GPS coordinates was implemented in
a QThread. But the only access to the main function was a
direct call to run(). Thus, the thread was *never* started.
The function call was always asynchronous [it was using an
event loop though, so the UI doesn't hang]. Notably this
means that the signals connected to the thread would never
fire. And the spinner would never be activated.
Thus:
1) Turn the thread into a simple function.
2) Remove the spinner.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Planned dives were still added by directly calling core code.
This could confuse the undo-machinery, leading to crashes.
Instead, use the proper undo-command. The problem is that as
opposed to the other AddDive-commands, planned dives may
belong to a trip. Thus, the interface to the AddDive command
was changed to respect the divetrip field. Make sure that
the other callers reset that field (actually, it should never
be set). Add a comment describing the perhaps surprising
interface (the passed-in dive, usually displayed dive, is
reset).
Moreover, a dive cloned in the planner is not assigned a
new number. Thus, add an argument to the AddDive-command,
which expresses whether a new number should be generated
for the to-be-added dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Select the proper dives after the add, remove, split and merge
dives commands on undo *and* redo. Generally, select the added
dives. For undo of add, remember the pre-addition selection.
For redo of remove, select the closest dive to the first removed
dive.
The biggest part of the commit is the signal-interface between
the dive commands and the dive-list model and dive-list view.
This is done in two steps:
1) To the DiveTripModel in batches of trips. The dive trip model
transforms the dives into indices.
2) To the DiveListView. The DiveListView has to translate the
DiveTripModel indexes to actual indexes via its QSortFilterProxy-
model.
For code-reuse, derive all divelist-changing commands from a new base-class,
which has a flag that describes whether the divelist changed. The helper
functions which add and remove dives are made members of the base class and
set the flag is a selected dive is added or removed.
To properly detect when the current dive was deleted it
became necessary to turn the current dive from an index
to a pointer, because indices are not stable.
Unfortunately, in some cases an index was expected and these
places now have to transform the dive into an index. These
should be converted in due course.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If the autogroup flag is set, search for appropriate trips in
DiveAdd() and add the dive to this trip. If no trip exists, add
a new trip.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Previously, each dive-list modifying function would lead to a
full model reset. Instead, implement proper Qt-model semantics
using beginInsertRows()/endInsertRows(), beginRemoveRows()/
endRemoveRows(), dataChange().
To do so, a DiveListNotifer singleton is generatated, which
broadcasts all changes to the dive-list. Signals are sent by
the commands and received by the DiveTripModel. Signals are
batched by dive-trip. This seems to be an adequate compromise
for the two kinds of list-views (tree and list). In the common
usecase mostly dives of a single trip are affected.
Thus, batching of dives is performed in two positions:
- At command-level to batch by trip
- In DiveTripModel to feed batches of contiguous elements
to Qt's begin*/end*-functions.
This is conceptually simple, but rather complex code. To avoid
repetition of complex loops, the batching is implemented in
templated-functions, which are passed lambda-functions, which
are called for each batch.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This refactors the undo-commands (which are now only "commands").
- Move everything in namespace Command. This allows shortening of
names without polluting the global namespace. Moreover, the prefix
Command:: will immediately signal that the undo-machinery is
invoked. This is more terse than UndoCommands::instance()->...
- Remove the Undo in front of the class-names. Creating an "UndoX"
object to do "X" is paradoxical.
- Create a base class for all commands that defines the Qt-translation
functions. Thus all translations end up in the "Command" context.
- Add a workToBeDone() function, which signals whether this should be
added to the UndoStack. Thus the caller doesn't have to check itself
whether this any work will be done. Note: Qt5.9 introduces "setObsolete"
which does the same.
- Split into public and internal header files. In the public header
file only export the function calls, thus hiding all implementation
details from the caller.
- Split in different translation units: One for the stubs, one for
the base classes and one for groups of commands. Currently, there
is only one class of commands: divelist-commands.
- Move the undoStack from the MainWindow class into commands_base.cpp.
If we want to implement MDI, this can easily be moved into an
appropriate Document class.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The whole undo system assumes that the indexes in the dive table
do not change under its feet. On desktop, there seems only one
exception left: editing of the dive time. To circumvent this,
hook editing of the dive-time to the already existing UndoShiftTime
command.
This introduces a temporary UI-inconsistency: this is the only
edit that is reflected in the undo-list. This will be fixed in
due course, when other edit actions are also made undoable.
UndoShiftTime is changed to take pointers to dives (which should
be stable by now) instead of uniq-ids.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On dive editing, for every changed field the code looped through
the whole dive-list and modified the selected dives. Instead,
get the list of selected dives once and use that.
Whereas this may look like a gratuitous optimization, it will
make things easier for subsequent commits. Notably, we can
pass the list of selected dives to an "UndoObject".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For this, an output-parameter was added to the backend merge_dives()
function. When non-zero, instead of adding the merged dive to
the preferred trip, the preferred trip is returned to the caller.
Since the new UndoObject, just like the delete-dives UndoObject,
needs to remove/readd a set of dives, the corresponding functionality
was split-off in a helper function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Play manual addition of dives via an UndoCommand. Since this does in
large parts the same thing as undo/redo of dive deletion (just the
other way round and only a single instead of multiple dive), factor
out the functions that add/delete dives and take care of trips.
The UI-interaction is just mindless copy&paste and will have to
be adapted.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Both callers have a dive * and transform that into an id,
the callee transforms it right back to the dive *. Simply pass
the dive directly. This will allow us to use the function for
dives that have not yet been added.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive site list was connected to centerOnDiveSite(). Apparently,
the currently selected dive site should have been shown in the map.
Yet, this never worked, because the actual dive site of the selected
dive had precedence in centerOnDiveSite().
It seems that centerOnDiveSite() had actually to purposes:
1) center on the passed in dive site
2) center on the dive sites of the selected dives
Therefore, split this function in two separate functions for
each of these use-cases. This allows us to remove some pre-processor
magic (mobile vs. desktop) and to remove a parameter from the
MainTab::diveSiteChanged() signal.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The statistics of the selected dives were calculated
a) into a global objects and
b) at a completely different place than where they're used.
There's no plausible reason for either. There fore render
into a caller-provided structure at the place of use.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Statistics were calculated into global variables every time the
current dive was changed.
Calculate statistics only when needed and into a structure
provided by the caller.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old surface interval calculation had fundamental issues:
1) process_all_dives(), which calculates the statistics over *all*
dives was used to get the pointer to the previous dive.
2) If two dives in the table had the same time, one of those would
have been considered the "previous" dive.
3) If the dive, for which the surface interval is calculated is
not yet in the table, no previous dive would be determined.
Fix all this by creating a get_surface_interval() function and
removing the "get previous dive" functionality of process_all_dives().
Remove the process_all_dives() call from TabDiveInformation::updateData().
Reported-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This reverts commit 1c4a859c8d,
where the override modifiers were removed owing to the noisy
"inconsistent override modifiers" which is default-on in clang.
This warning was disabled in 77577f717f,
so we can reinstate the overrides.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As described in the referenced issue, we where able to navigate to
nonlogical static pages (like information, statistics. extra data) when
adding a dive. These are output style pages that make no sense on
edit or add. Further, disable access to some pages when entering edit mode.
Notice that the small change in file mainwindow.cpp is simply
because this this not work at all, and became superfluous any
way.
Fixes: #1445
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
1) Add a missing <div>
2) More importantly: recognize html content via <div>-tags instead of
<table>-tags.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signals can be useful. In this case, a simple function call does
it. Thus, remove the signal. It can be readded later at an more
appropriate place.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In a previous commit, the get_gasmix_* functions were changed to
return by value. For consistency, also pass gasmix by value.
Note that on common 64-bit platforms struct gasmix is the size
of a pointer [2 * 32 bit vs. 64 bit] and therefore uses the
same space on the stack. On 32-bit platforms, the stack use
is probably doubled, but in return a dereference is avoided.
Supporting arbitrary gas-mixes (H2, Ar, ...) will be such an
invasive change that going back to pointers is probably the
least of our worries.
This commit is a step in const-ifying input parameters (passing
by value is the ultimate way of signaling that the input parameter
will not be changed [unless there are references to said parameter]).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Commit df156a56c0 replaced "virtual"
by "override" where appropriate. Unfortunately, this had the
unintended consequence of producing numerous clang warnings. If
clang finds a override-modified function in a class definition,
it warns for *all* overriden virtual functions without the override
modifier.
To solve this, go the easy route and remove all overrides. At least
it is consistent.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a context-menu entry to TabDivePhotos which opens the folder(s)
of all selected files.
Fixes#1514.
Suggested-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This changes the above mentioned terms everywhere in the UI to
reflect the fact that Subsurface now also supports video files on top
of image files.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Correctly use gettextFromC::instance()->tr(); instead of a simple
tr(); to translate the dive mode names.
This goes on top of 0bc9edf855
and finally makes the whole thing work.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
helpers.h included qthelper.h and all functions declared in helpers.h
were defined in qthelper.h. Therefore fold the former into the latter,
since the split seems completely arbitrary.
While doing so, change the return-type of get_dc_nichname from
"const QString" to "QString".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The former should be translated but not those that
go to xml/git.
... and fix capitalization of pSCR.
Suggested-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Even though hashes of image contents are calculated, the hashes are
not compared to actual file contents in routine-operation. Therefore
give the user the option to recalculate thumbnails, should they have
edited the picture.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The function removePicture() had a flag "last", which would indicate
that the called had finished removing pictures. Only then would
the model be recalculated.
This is a strange interface and, matter of fact, the caller was buggy:
if the last picture to be removed didn't have a proper url, removePicture()
was never called with "last" being set.
Change the interface to take a list of pictures to be deleted. This
will allow us to make picture deletion smarter in follow-up commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
...as the usuage is not anymore about a computer but
a momentary dive mode. Rename the end indicator as well.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Connect the thumbnailer signal to the dive picture model slot.
This needs some code-reshuffling in the dive picture model.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If "Edit dive" is selected from the dive list or the map view, switch
to a new mode, which shows the dive infos and the profile.
After the edit, switch back to the previous state.
Fixes#1213
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Previous taglist_get_tagstring signature/implementation did not allow
handling of cases where inputted buffer could not contain all tags.
New implementation allocates buffer based on pre-computed size allowing to
insert all tags in the returned string.
Added get_taglist_string in qthelper to handle conversion to QString
Added TestTagList with tests for taglist_get_tagstring
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
strdup(qPrintable(s)) and copy_string(qPrintable(s)) were such common
occurrences that they seem worthy of a short helper-function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace constructs of the kind
s.toUtf8().data(),
s.toUtf8().constData(),
s.toLocal8Bit().data(),
s.toLocal8Bit.constData() or
qUtf8Printable(s)
by
qPrintable(s).
This is concise, consistent and - in principle - more performant than
the .data() versions.
Sadly, owing to a suboptimal implementation, qPrintable(s) currently
is a pessimization compared to s.toUtf8().data(). A fix is scheduled for
new Qt versions: https://codereview.qt-project.org/#/c/221331/
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a combo box for water types with defaults for fresh water, sea water
and the EN 13319. All values taken from units.h, where EN 13319 was added
beforehand.
Custom values can be entered through a spinbox.
Also changed "Salinity" in TapDiveInformation.ui to "Water type".
Translation required!
Signed-off-by: Oliver Schwaneberg <oliver.schwaneberg@gmail.com>
Use struct temperature_t for temperatures in struct stats_t and
use get_temperature_string() when printing these temperatures for
statistics and HTML export.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
This change deals with issue #554.
If you enter a dive duration manually, the cell renderer cuts the seconds
away when the changes are saved. I added the helper "render_seconds_to_string"
as a counterpart to "parseDurationToSeconds". The helper keeps the seconds,
if not null. The rendering of the cell is done at two places in the code,
so I think it is cleaner to add a dedicated method for it.
Signed-off-by: Oliver Schwaneberg <oliver.schwaneberg@gmail.com>
A very simple commit to start 2018. When hitting new logbook from
a currently open logbook, and the current dive has tags filled in,
they stayed around in the UI. Just clear them. Further, delete
an unused variable.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Besides being the right thing to do (code reflects reality), it
silences a compiler warning.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This implements different zoom levels for the dive photos tab as
suggested by Stefan Fuchs <sfuchs@gmx.de> in #898.
The zoom level can be changed using a slider or CTRL+mousewheel.
Zoom levels range from a third of the standard thumbnail size to
thrice the standard thumbnail size.
Thumbnails are cached in maximum resolution and scaled down on
the fly. Because the profile widget took its pictures from the
photo list model, an extra picture copy with a fixed size had
to be introduced.
The UI is still a bit crude.
Reported-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Small change to allow the dive pictures list to use the available
space if one resizes the window or switches to different mainwindow
view.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Icon aliases were complete mess.
Some icons had alias some didn't.
Named with underscores vs. hyphens vs. camelCase.
Lower vs. upper case.
"ICON" prefix vs. suffix vs. nothing.
With vs. without filename suffix.
Some didn't make sence. Eg. mapwidget-marker-gray
(I can see, it's grey, but what does it represent?)
Some were duplicated, eg warning vs. warning-icon.
Some were name after widget, which is wrong.
Do not reinvent wheel. Use widely used naming scheme
close to Freedesktop Icon Naming Specification. This
will enable usage of common icons from current set in
the future. Thus Subsurface will fit nicely to GUI.
This changes icon aliases to one, easy grep-able style.
Signed-off-by: Martin Měřinský <mermar@centrum.cz>
Disable tabs for equipment, info, pictures and extra info if a
dive trip is selected.
Remember specific tab selection for dives and dive trip to recover
selection when browsing dive list.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Icon aliases were inconsistent mess. Underscores vs. hyphens vs. camelCase.
With vs. without filename suffix. Lower vs. upper case. "icon" suffix vs.
prefix vs. nothing. Some were duplicated, eg warning vs. warning-icon. Some
icons didn't have alias at all.
This changes all icon aliases to one, easy grep-able style which complies
to Freedesktop Icon Naming Specification (Guidelines).
Signed-off-by: Martin Měřinský <mermar@centrum.cz>
After one selected a dive and then selects NO dive don't touch
the visibility of UI fields for depth and duration.
So if previously selected dive was a manually added dive, keep them
visible. If it was no manually added dive keep them invisible.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Remove duplicate and incorrect setPlainText call via macro for dive notes.
Deal correctly with ASCII line breaks "\n" in dive notes with html
markup (replace them with <br>).
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
After editing the cylinder table (e.g. deleting a cylinder) and
accepting the changes copy the whole dc samples for the dive edited.
This is important because the sensor idx in the samples may have changed.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
If the user implicitly adds a dive site by editing a dive, and
a location filter is active, check the new dive site in the
location filter.
This is done by informing the LocationFilterModel of the new
dive site name prior to repopulation. The LocationFilterModel
then adds a corresponding entry and marks it as checked.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since commit 01d961086c, MainWindow::refreshDisplay()
is called in the refreshDiveInfo() signal of maintab after editing a
dive site. Since this was the only use of the refreshDiveInfo signal,
remove this signal and instead connect to MainWindow::refreshDisplay directly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Until now when selecting a dive w/o dive site after having a previous
dive with dive site and location tags displayed, the location tags of the
previously selected dive where still displayed.
This fixes this behavior.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Calls MainWindow::refreshDisplay() if a dive site was edited so that
the filter lists are updated. The old call to updateDiveInfo() was
removed because it is call implicitly in MainWindow::refreshDisplay()
anyway.
Fixes#675.
Requested-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Until now accidentally the dateLabel was disabled and the timeLabel
was enabled. Changed this the other (correct) way round.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
current_dc is a macro that determines the dive computer
based on the current dive number. When the planner is started
from an emtpy dive list, the dive number ends up being -1 and
that doesn't produce a valid dive computer. Use the divecomputer
of the displayed_dive instead. This is done via a macro that
can also be used in two other places. Without this patch, the
planner crashed when called on an empty dive list.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
For the geo references tags update the following:
- Nicer look w/o "Tags:" text and brackets when inside location UI
- Translation for "Tags:"
- Warning message when no dive site layout categories are set
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Entering a name first creates and hooks up a dive site which we can then
use in the edit dive site dialog to store modifications.
This doesn't really fix these two bugs, but it might impact whether they
can still be recreated
See #633
See #636
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Calculating dive.when + dive.duration doesn't always give the correct
endtime of a dive especially when a dive has surface interval(s) in
the middle.
Using the helper function dive_endtime() fixes this issue.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
In desktop-widgets, remove globe.cpp, globe.h and also remove
the NO_MARBLE macro usage.
At this point the MapWidget will always be created and there will
always be a map in the application.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Based on NO_MARBLE, call the same methods in the two different classes.
Later the dummy Marble GlobeGPS (for NO_MARBLE) should be removed.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Update the function to create the dive duration string in a way that
it can be used also in info and stats tab and added some more flexibility.
Changed layout for <1h freedives to "0:05:35" (w/o units) or "5:35min"
(with units and :) or "5min 35sec" (with units with space).
Add a new function to create the surface interval string.
Completely remove old function get_time_string() and get_time_string_s().
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Tags are handled differently from other fields, we need to call
the special handling after the new dive was added and marked as
the current dive.
Fixes: #369
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Giving the string " and " to transiflex seems to fail and/or
it's highly possible that the translators make a mistake by
translating it into "and" or " and" or "and ".
Change the string to "and" and hard code the whitespaces before and after.
Change O2 to O₂ in statistics.
Translate "He" and "O2" in statistics.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
... to make it look more similar. This includes:
- Same spacings between the boxes
- Same way how to use the available space
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
We need to make sure the model is avaliable for the table
until it hits the destructor.
Fixes#347
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While the new syntax is nicer and faster, this isn't supported prior
to Qt 5.6 and we still support 5.5 on older OSs.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
