Completely adapt to the api changes of OverlaySheet in Kirigami2
in order to achieve the same look and behavior for the dive
edits that had with kirigami1
Port most components to QtQuickContrls2, except comboboxes
in the dive edit sheet that will need a new control type
Signed-off-by: Marco Martin <notmart@gmail.com>
Wfloat-conversion enabled for C++ part of the code
Fix warnings raised by the flag using lrint
Original issue reported on the mailing list:
The ascent/descent rates are sometimes not what is expected.
E.g. setting the ascent rate to 10m/min results in an actual
ascent rate of 9m/min.
This is due to truncating the ascent rate preference,
then effectively rounding up the time to reach each stop to 2s intervals.
The result being that setting the ascent rate to 10m/min
results in 20s to ascend 3m (9m/min), when it should be exactly 18s.
Reported-by: John Smith <noseygit@hotmail.com>
Reported-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
Not using lrint(f) when converting double/float to int
creates rounding errors.
This error was detected by TestParse::testParseDM4 failure
on Windows. It was creating rounding inconsistencies
on Linux too, see change in TestDiveDM4.xml.
Enable -Wfloat-conversion for gcc version greater than 4.9.0
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
Update tests with a (compile time) option SUBSURFACE_TEST_DATA,
pointing to test data base path. It is needed for cross compilation cases.
SUBSURFACE_TEST_DATA is set to SUBSURFACE_SOURCE by default,
or configurable via cmake option -DSUBSURFACE_TEST_DATA="...".
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
In order to get the translations right for Windows we now explicitly
pull in a lot more translation files - some of which don't exist in
earlier Qt versions.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we manually track Kirigami we need to compile the desktopicon.cpp
file when not building on Android or iOS.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Right now this is only designed for Linux where current distros all should have
a new enough libgit2 (and our instructions tell people to install this with
system tools, so we should also use it).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It seems the CMake versions on Linux and Mac disagree about what might
be the correct way to use parenthesis in a mixed AND/OR conditional.
This may seem overkill, but it made both CMake versions happy.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This removes all references to WebKit if cmake option USE_WEBKIT is enabled.
For the user manual it changes it to WebEngine (seems to work for me).
Similar for the Facebook connection (minus a reference to a cookie jar).
This I could not test at the moment, as I wrote this on a train.
Printing does not work, it is a null operation at the moment. Currently,
large parts of of the printing code are commented out as there is no direct
way to access page elements in WebEngine. It seems this needs to be done
via Javascript (with a callback invoked). There is new functionality in
WebEngine to render a view to a PDF file but this needs more work (and
probably some thoughts towards page breaks).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
No idea when this got broken. Fix seems like a hack as that variable
should get set in the plugin CMakeLists.txt. But it seems to work, so
"whatever".
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a simple cp2130 userspace driver. Its probably unusable in the
real world but its a great base to build upon.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It appears that instead of statically linking against ssl/crypto/ssh2, you
instead have to dynamically link against it and then bundle the library in
the APK. The documentation is not 100% clear and I don't have an Android
Nougat device to test this with, so for now this is an attempt.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Just link it directly into Subsurface-mobile. That's what we already do
with the qmake file for iOS, now the cmake based builds do the same. This
should remove a lot of issues.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now kirigami needs to be built with a C++ plugin.
In cases of mobile operating systems such as iOS (and in a lesser measuse,
Android) having a proper plugin loaded at runtime may be difficult, so
statically link it together with all of its qml files compiled as a
qresource inside the static library.
Signed-off-by: Marco Martin <notmart@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With Qt 5.7, they started to require c++11 support, and in 5.6.1 some
nullptr's showed up in QtAndroidExtras/qandroidfunctions.h, so now we
need to compile our c++ code with c++11 support in our compiler.
As Thiago pointed out, this effectively "downgrades" GCC 6 from c++14
support to c++11.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Having subsurface-core as a directory name really messes with
autocomplete and is obviously redundant. Simmilarly, qt-mobile caused an
autocomplete conflict and also was inconsistent with the desktop-widget
name for the directory containing the "other" UI.
And while cleaning up the resulting change in the path name for include
files, I decided to clean up those even more to make them consistent
overall.
This could have been handled in more commits, but since this requires a
make clean before the build, it seemed more sensible to do it all in one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
with the adittion of gpslistmodel/location, the libraries
qt-models had a direct dependency on subsurface-core, and
subsurface-core had a direct dependency on qt-models, this is
bad.
Moving a bit of code around I'v managed to clean this out, and
also to clear a bit of uneeded code (GpsTracker and gpsTracker where
basically the same thing.)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to enable the BT_SUPPORT compilation flag to get the support
built in.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Because of this a bunch of variables need to be passed in and the quoting
changes in rather subtle ways.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The android build could be the Desktop and the Mobile app,
we cannot force it to be the mobile.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The hack in commit c8be04edad ("Mac build: move the QtXml hack into Cmake")
had been lost in the latest cmake rewrite.
Similarly, the modified BUNDLE info and the manual QML deployment.
Strangely this still doesn't correctly create a Subsurface-mobile.app on Mac.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This had not been updated since the change of direction that we would support
building Mobile and Desktop on all supported platforms.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
FILE READ doesn't do what we want. It's the STRINGS command that considers \n
as whitespace and gets the correct result.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We where able to build the android-mobile on desktop and the desktop on
android, now I allow only mobile on android and desktop on desktop.
this is to make the cmake clear, and we can also use the emulator on
the android platform, so nothing is really lost.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
This is actually a good change: we used to write a new
CMake file in configure time just to move it outside of the
source to the build dir at compile time. Now this file is
pre-created and it's only moved.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
In source builds creates a lot of noise on the source tree,
creating tons of temporaries that makes git status cry, and it also
creates dangerous files that have names similar to actual source
and could make a developer use them by mistake.
Make out of source buiild mandatory to remove that, it also makes
CMake code easier to read.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
CMake is a strange and complex language for buildsystems,
and as such we need to let the main CMakeLists.txt be as
clear as possible.
Moving a bunch of code that deals with finding git via
default CMake way or pkg_cofig to a file named 'HandleFindGit'
on our cmake/Modules folder.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
And try to fix the upper case / mixed case confusion that we apparently
have with libssh2 - oh how I hate this stuff.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also fixes a capitalization error that prevented finding libssh2 in some
circumstances. And adds a missing include when building with libzip on Mac.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way build.sh can build a Subsurface.app that the user can use via
open subsurface/build/Subsurface.app
after running build.sh.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The workaround to building Subsurface-mobile on Mac messes with the ability to
sign the bundle, so only do this when building Subsurface-mobile which we don't
bundle, anyway.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some of the flags needed to build for android was set in cmake. There
are many more that needs to be set correctly for things to work, so
having some in cmake and some in the Android build.sh is just confusing.
This removes the bits from cmake and moves everything into build.sh.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With this running
make && make install
should give you a Subsurface-mobile.app that you can execute (either with
double click or using "open Subsurface-mobile.app" from the command line).
This contains a couple of hacks but I didn't try too hard to make this clean
since Tomaz is redoing the CMake build system, anyway and I'll need to make
sure this still works once he's done.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The error message was completely useless, but it turned out to be an issue of
the order of arguments to add_executable().
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While this is primarily something targeted at a mobile device, with many
of the 2 in 1 devices it is possible that the user might be running the
desktop version of Subsurface on a mobile device.
As a first step to make it possible to collect GPS fixes on such a device
we need to make the infrastructure to do so available in the desktop
application as well.
This still needs to be hooked up in the desktop UI.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This enables posibility of building standalone import tool via cmake.
Adds an option SMARTRAK_IMPORT (defaults to OFF) which, if turned ON,
will require glib-2.0 and libmdb libraries to be installed, and, calling
will produce an executable with the highly original name of smtk2ssrf.
I have no capability to cross-compile to windows, so I haven't even
tried to put this in Win, less say in Mac. I expect linux users which
may be actual users of SmartTrak, to test this before trying to build on
windows, although the target public will probably be the windows users (or
at least, ex windows user).
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This doesn't do a thing - just adds the empty class and sets up the Cmake
file so it finds the required Qt components for Subsurface-mobile.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit ba55c60395 broke Bluetooth
support for me. This patch moves the setting of BT_SUPPORT earlier,
re-enabling BT download option on the download dialog.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some old CMakes that we use had problems with it, change to use
the qt5_wrap_ui macro that's bundled with Qt.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes the organization of the qml files a bit more fine-grained, it
prevents mixing of .cpp and QML files, and also of what's compiled, and
what's included in the app as qrc data.
In particular:
- subsurface specific QML items go into the qml/ subdirectory
- theme and unit definitions to into qml/theme subdirectory (they
already were located in a theme directory)
- generic components, such as our Label goes into qml/components
This facilitates sharing of functionality and identifying common stuff
better. Ideally, we can pull qml/theme and qml/components from a
standardized set at some point, so we don't have to maintain that code.
Signed-off-by: Sebastian Kügler <sebas@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the cmake restructuring it seems that subsurface-mobile building got
completely messed up. With this subsurface-mobile still doesn't actually
build (still too many unfulfilled dependencies, but we're getting closer).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows for finding headers when not in /usr/include (like
parallel-installable distribution-packaged grantlee5)
Signed-off-by: Rex Dieter <rdieter@fedoraproject.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was set twice, the first time before we checked that we have a new
enough Qt version installed.
Also fixed a typo.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is to make it possible to use some nice to have features of
c11 and c++11 like range based loops, delete default functions,
auto variable assignment. Talked to Dirk about this and he is ok
with the change, but he also states that he will not accept lambdas
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A bit of dust was setting here, when I moved tons of things around
I forgot to remove some bits.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Besides making it more simple to add a new test now since
you don't need to play hide and seek with the main cmake
this has another good thing: on IDE's that scan the cmake
to create targets on the project tree, the main project
was being popullated with test-targets on the main tree
and not inside the tests directory.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The reason for that is, even if profile widget is made with qpainter
and for that reason it should be a desktop widget, it's being used
on the mobile version because of a lack of QML plotting library that
is fast and reliable.
We discovered that it was faster just to encapsulate our Profile in
a QML class and call it directly.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This one was pretty easy because of the work I did a few months
ago to separate the models from the UI.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is needed to compile both in a single call to make. Also it will
help removing some of the mistakes in the current android version:
it always created the mainwindow, even without using it for anything,
so tons of memory will be freed now for the android version, making it
snappier and smoother.
This is a necessary move so we don't need to #ifdef all over the place
for the two different versions, and imo the changes needed to keep both
versions will not be that huge if we keep things in subsurface-core
sane.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we have now destkop and mobile versions, 'qt-ui' was a very
poor name choice for a folder that contains only destkop-enabled
widgets.
Also, move the graphicsview-common.h/cpp to subsurface-core because
it doesn't depend on qgraphicsview, it merely implements all the
colors that we use throughout Subsurface, and we will use colors on both
desktop and mobile versions
Same thing applies for metrics.h/cpp
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There was no reason at all to keep those icons on the root
folder.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Did a git rebase and some stuff changed in the meantime;
This is a compatibility commit: Add a few include directories
on the cmake to quiet some ui_headers.h not being found (the
ones that are created automatically by uic) and a few noiseances
like models requiring interface functionality.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And adapt a new CMakeLists.txt file for it. On the way I've also
found out that we where double-compilling a few files. I've also
set the subsurface-core as a include_path but that was just to
reduce the noise on this commit, since I plan to remove it from
the include path to make it obligatory to specify something like
include "subsurface-core/dive.h"
for the header files. Since the app is growing quite a bit we ended
up having a few different files with almost same name that did
similar things, I want to kill that (for instance Dive.h, dive.h,
PrintDive.h and such).
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
CMake can be a good system but if we keep everything into one big
cmake file things can go nuts really quick. Since I already took
quite a start on an subsurface layer separation some time ago, I'm
improving it by making each module on Subsurface depend on it's own
CMake module.
This first patch moves the qt-ui part to qt-ui/CMakeLists.txt file,
it cleans tons of the main cmake file ( moving all parts to the in
ternal folder ), and makes things more easily manageable by the
programmer that will change the ui bits, he doesn't need to play
hide and seek with the CMakeLists.txt file anymore, trying to figure
out where should he put his newly generated file.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds subsurface.debug script and install it for Linux.
Instead of running subsurface, you can run subsurface.debug which will launch
subsurface as usual, but will monitor subsurface exit and run gdb automatically
if subsurface crashes and it creates a crashlog in $HOME/.
Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's a list, not a string. Treating it as a string creates all kinds of
exciting weird errors that make no sense.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows us to support the Suunto EON Steel on Mac, assuming the matching
libdivecomputer version from the Subsurface-branch. If that was compiled with
the hdiapi lib then hopefully the build for Subsurface should find that library
as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This shouldn't be on the maintab.cpp, this file is already too convoluted.
[Dirk Hohndel: slightly refactored this commit and the next one to make
the code actually work and make the split across the two
commits more reasonable]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Under certain conditions on my Mac the build process will happily find libssh2
but then at link time can't figure out where it is. Making the path to the
library explicit seems to fix that issue.
This commit also adds the code to dump all visible variables at the end of the
cmake file (commented out). I have looked this up online, added it to address
an issue, and then removed it quite a few times... I figure I might as well
keep it there for the next time I need it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds the option to retrive Marble with pkg-config in a
similar way to Grantlee, libgit2, etc.
It reorganizes the "if(NO_MARBLE)" case to be the "else()" of
if(NOT NO_MARBLE).
Also, it adds the "-r" option to "rm" here:
add_custom_target(link_marble_data ALL COMMAND rm -rf ./marbledata ...
as otherwise it fails on Win32/Msys with "marbledata is a directory".
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As we get closer to the 4.5 release we should try to make sure we build
with printing enabled everywhere and just turn it off if we no it's not
supported.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a new Model, it's the QSortFilterProxyModel that accepts
functions to filter / sort. so instead of creating a new class
for each different sorting (overkill), now we can just create
a function and pass to this class. I'll rework the filtering
system of subsurface to use this - in the meantime I've created
this to ease the creation of another filter: the dive sites
by gps coordinates.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And add a small message that two potential ERRORS that are thrown in the
deploy step are actually harmless.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This just makes sure that writing data to git storage and reading it back
gives you the same result. Without the fixed generation of initial dive
site UUIDs this fails.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Cmake has a bug that causes the moc process not being handed the necessary
defines for the architecture we are building for.
Also we were missing a library to make the BT implementation on Windows
work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This connects the serial_ftdi implementation to subsurface, and builds
libftdi1 for the android builds.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This cleans up serial_ftdi.c from being a libdivecomputer source and
making it into a subsurface custom_serial.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should work much better as libusb is really only required if you want
support for all the dive computers (e.g., Atomics Aquatics Cobalt family).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This model should be used inside the Edit Dive Site mode.
It should display all photos from all dives that are part
of this dive site, ignoring trips.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also remove the quick hack from commit 947fda14c5 ("Bluetooth support:
quick build fix for Qt5.2"). I should have thought this through before
pushing that commit, but oh well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This removes the extra Q_OS_ANDROID define to prevent a redefined
warning.
Somehow, the qt headers didn't define Q_OS_ANDROID previously, but how
does.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Link the QMLProfile class to the DiveList.qml file. The profile is
displayed above the dive details.
Signed-off-by: Grace Karanja <gracie.karanja89@gmail.com>
We need to link things in the correct order, even on android.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This teaches android build.sh and cmake about how to build the qml ui of
subsurface-mobile as a apk.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This introduces code to use qt-android-cmake to produce a working apk.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Due to bugs in libgit2, we force linking with libssh2 to add
git-over-ssh support. On android we currency don't want libssh2 due to
its dependency chain, so this makes the libssh2 force linking opt-out.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way we can selectively turn off Facebook support.
And turning off both Facebook support and support for the user manual
allows us to not rely on QWebKit which once again allows debugging
Subsurface with valgrind on Arch Linux.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Create a custom Bluetooth serial communication using the QTBluetooth
API and use it when the Bluetooth download mode is enabled.
First try to connect on RFCOMM channel 1 because this is the default
RFCOMM channel of SPP service for most devices. If this doesn't work
try again on RFCOMM channel number 5 because it could be a Petrel2 device.
Add a fake open function for the custom implementation. This is
used when the selected device is HW OSTC 2N and the Bluetooth
mode is activated, then fake the open call of the serial device.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Implement a dialog which can be used for remote Bluetooth devices
selection and to control the local Bluetooth device.
Functionalities of the widget:
- expose information about the local BT device
- scan for remote BT devices
- pair/unpair with a remote BT device
- turn on/off the local BT device
- logging
- save the selected BT device
The selection dialog is created when the bluetoothMode checkbox
is enabled.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The changed introduced in d880040d breaks mobile builds by not correctly
linking with QtQuick. This change fixes that by fixing the incorrect line
in CMakeLists.txt so that the correct QtQuick headers will be found.
Signed-off-by: Grace Karanja <gracie.karanja89@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The TemplateEdit class works to customize the tempalate before printing,
User can select the font-size, font-type, color-palette, linespacing
and editing the template HTML code.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This sets up a standard dive scenario (30 minutes at 260ft/79m, EAN36 and
Oxygen as deco gases, last stop at 20ft/6m) and calls the planner to set
up a dive plan given certain standard gases.
Instead of trying to verify the complete plans it checks that we switch to
the deco gases at the right depth and the complete duration of the dive
matches our expectation.
The test intentionally fails right now for imperial as we have the wrong
switch depth for Oxygen. See how useful tests are?
On the downside, the test does NOT produce the same plan as Subsurface
when I try to create a consistent setup for both - and I have not been
able to figure out why. There must be some other parameters that I'm not
setting, but I haven't identified them, yet. It's very small differences,
for example in the metric case the stops at 21m, 9m, and 6m are each one
minute shorter in the test than it what Subsurface calculates.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is designed to store taxonomy information for dive sites, including
information where the data came from.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was intended to help us fine libssh2, but since it works as is now,
and the typo makes the entry pointless, I'm pretty sure that this isn't
needed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the first step to be able to build Subsurface with CMake for
Android.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt for android doesn't have any printing support, so this fixes
NO_PRINTING so we can build against a Qt without any printing support at
all.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This re-introduces the NO_USERMANUAL flag, which is needed due to the
fact that Qt-Android doesn't have a WebView to view the manual in.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This model will be used to show the dives in QML. This commit adds
the model, and the means to link it to QML.
Signed-off-by: Grace Karanja <gracie.karanja89@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Build the QMLManager class when compiling for mobile.
Signed-off-by: Grace Karanja <gracie.karanja89@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a subsurface-mobile entry to the CMakeLists.txt file. When cmake
is run with -DSUBSURFACE_MOBILE=True, the compiled app will be named
subsurface-mobile, and the initial page (main.qml) will automatically
be loaded.
This will
ensure that the mobile app will be linked to QtQuick.
Signed-off-by: Grace Karanja <gracie.karanja89@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In earlier versions we didn't simply create a link but actually copied the
directory and its contents. So for this to work smoothly for people who
have built earlier versions of Subsurface with cmake we need to no just
remove the link but be willing to recursively remove that directory.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Check for NO_PRINTING instead of checking for NOT NO_PRINTING.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This is mostly a proof of concept right now; it shows that it is possible
to create a headless server application that exports a git repository
based data file as html.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order to be able to initiate an HTML export from the core library we
need to separate the actual logic from the UI.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This seems quite convoluted to me but I can't seem to make a more straight
forward implementation work. The idea is that core code should never
directly call into the UI.
So instead the core code (this is C code) calls a helper function. That
helper function calls a member function of a class which in return emits a
signal. The UI code connects to that signal and acts accordingly when it
is received.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This simplifies the distance calculations and removes a dependency.
This version uses propper math instead of my to simple previous version.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And use this to find a dive site within a certain radius of a GPS fix.
This will be used to figure out if dive sites might be the same.
This uses a new Qt5 component (Positioning) which was added in Qt5.2.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code can be removed as we don't need QT printing code anymore.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If NO_PRINTING is not set, subsurface will require grantlee during
building. As Grantlee will be a hard dependency for Subsurface, so no
Grantlee means no printing.
[Dirk Hohndel: switched default for NO_PRINTING to ON]
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Render Html pages into a QWebView then print it using QPainter. the
Printer::print() is called that prepare the HTML file to be rendered by
the QWebView.
Printer::render() will do the rendering task.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the main class to hold Grantlee engine logic.
TemplateLayout::generate() loads QT5Grantlee and initialize the
templates then returns a QString that contains the rendered HTML by
Grantlee library.
Also this class contains the Dive class which holds the logic that
formats the data before passing it to the templates.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
