When presenting the list of dive sites on the dive-info tab, sort
the dive sites by distance to the current dive. The idea is that
when the user wants to select a dive site, close dive sites should
be prioritized.
The location of the dive is determined with the dive_get_gps_location()
function introduced in the previous commit. This actual GPS data get
precedence over the currently set dive site for that dive.
On change of dive, the current location is updated in the
DiveLocationFilterProxyModel so that a potentially expensive search
for GPS data is not repeated for every comparison.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Some dive computers save GPS data. Currently, this is stored
by libdivecomputer in an "extra field". When generating a
new dive site for a dive try to use this data to place the
dive site.
To do so, create a "dive_get_gps_location()" function. This
function can be extended later to use e.g. event. When creating
a dive site, use the result of this function over a potential
pre-existing dive site.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The parse_location() function was used in three places. In two
of them, the declaration was in the translation unit. Instead,
move the declaration into a header file, to avoid duplication
and the possibility of inconsistencies.
The "units.h" header was chosen as this is where location_t
is defined.
Moreover, make the string argument to parse_location() "const
char *", so that it can be used on non-owned buffers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of multiple string-concatenations, create the string object
from a single string literal.
Yes, this is a mostly pointless "optimization". But it saves a few
bytes.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, dive site names are only updated on full reload.
Instead hook directly into the corresponding signal in the
MapLocationModel to set the name. Also to the coordinates
directly there instead of going via the MapWidgetHelper.
In the MapWidgetHelper, just center on the changed dive site.
Hook into the signal directly there and remove the slot
from the MapWidget. This makes the whole call-chain at least
one call shorter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move the code to add the first selected dive site from
MapWidgetHelper::enterEditMode() to MapLocationModel::reload().
Thus, the list of sites is built only at one place. For this
it is necessary to pass a pointer to the map, so that new
dive sites can be added at the center of the map.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of looping over the dive table and extract dive sites,
loop over the dive site table.
This makes it possible to show dive sites that have no dive
associated with them.
But we have to create to functions that check whether a dive
site has any shown dives or has any selected dives.
Moreover, change the code to add near dive sites of the same
name if in edit mode. Other wise (erroneously added?) dive
sites with the same name cannot be moved on the map.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Invalidating the filter can cause numerous selection-change notifications.
These cause a full UI reload. Therefore, go into "command" mode that was
implemented for the undo commands. Then, all selection-changes are
considered as "programmatical" and ignored.
At the end of filter invalidation, a filter-finished signal causes a
proper reload anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There used to be a flag to avoid reloading of the map. Since this
is not used anymore, remove it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In MapWidgetHelper::centerOnSelectedDiveSite() the selected dive
sites were recalculated. Simply use the ones we already know are
selected.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When switching between the dive-site-table to the dive-site-edit
tabs, the filter would be set to a dive site. Usually, this would
be the same dive site as before. Nevertheless, this caused a full
map-reload. Detect if the dive-sites to be filtered are the same
and turn this operation into a no-op.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive-site-edit and dive-site-table tabs both put the filter
into a special dive-site mode. When switching between both, it
could happen that the one got its show befor the other got
its hide event.
Thus, the first would start dive-site filtering and the second
stop it. Now the app was not in filter mode even though it should.
To solve this problem, add reference counting for the filter's
dive-site mode. In both tabs call the enter/exit functions
on show/hide. In the dive-site-table tab, when the selection
changes, use a set function that doesn't modify the reference count.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When dive sites are edited, we shouldn't highlight the sites
of the current dive, but the currently edited site(s).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since the dive-site-filter is active either on the dive-site-edit
page or the dive-site-list page, use that as the flag for dive-site-edit
mode. Moreover, when the filter is reset, the
MapWidgetHelper::reloadMapLocations() function is called, so we
can use that place to enter/exit edit mode.
This makes it easier to keep everything consistent.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When entering map-edit mode and the dive site existed, its
coordinates were extracted but never used. Remove that useless
if-branch.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
DiveListView::selectDives() would only select new dives but not clear
the old selection. Thus, callers would have to clear the selection
first. That would lead to two selection-changed signals.
Move the unselectDives() call into DiveListView::selectDives().
The DiveListView has an internal flag to prevent double signals.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was only used locally and only a stub for calling
MapWidgetHelper::centerOnSelectedDiveSite. Call the latter directly
instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When changing the dive selection, we have to reload the map to show
the correctly highlighted flags. Do this directly by hooking into
the DiveListNotifier::divesChanged signal instead of indirectly
via the MainTab.
Moreover, on reload center on the highlighted dive sites.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This member variable was only used locally in functions.
Accordingly, make it a function-local variable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
MapWidgetHelper::selectVisibleLocations() calls setSelection()
on a single dive. Firstly, this make no sense anymore, as
we now support multiple highlithed flags. Secondly, the
highlted dives are now derived from the selected dives.
Therefore, remove the call.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To detangle this code a little bit, let centerOnSelectedDiveSite()
just do what is says: center on the selected dive sites.
Don't update the selected dive site by calling
MapLocationModel::setSelected().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If multiple dives are selected, highlight all corresponding sites.
For that, replace the MapLocationModel::m_selectedDs pointer by
a QVector<>. Fill the vector in MapLocationModel::reload() and
add a isSelected() member function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The map model keeps track of the dive site positions on the
map. Therefore, it seems more logical to have the code calculating
the map position in the model, not in the helper-class.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When on the dive site tab or editing a dive site, we want
to show all dive sites so that the user can related different
dive sites. Therefore export a "in dive site mode" flag from
the filter model and don't filter in that case in MapWidgetHelper.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
During edit mode, we could get spurious reload() requests owing
to tabs being hidden. This led to undefined behavior:
In some cases entering dive site edit mode would show all dive
sites, in some only the dive site of the currently edited dive.
Therefore, refuse to reload the map while in edit mode. The
corresponding flag already exists.
Partially fixes#2076
Reported-by: Doug Junkins <junkins@foghead.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On reload of the map, the map exits edit mode. Sounds logical
at first, but the whole map-mode code is very unpredictable.
What happened was that when switching from the dive site table
to dive site edit mode, the code would enter map edit mode first.
Then, the dive site tab got its hide-signal, which would reset the
filter. This would reload the map and thus exit mode. Hence the user
can't drag the flag on the map.
Partially fixes#2076
Reported-by: Doug Junkins <junkins@foghead.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This has been a feature people have asked for quite frequently. It is
taking up some valuable screen real estate - so the question could
become if there should be a switch to enable / disable it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Creates the dialog box to select which sites to import from the file
selected in mainwindow.cpp. The DivesiteImportModel is created as a
table to display and select which sites are to be imported. Once the
sites are selected, the Command::importDiveSites command is called to
add the sites to the core dive site table with undo/redo functions.
Signed-off-by: Doug Junkins <junkins@foghead.com>
Adds "Import->Import dive sites" menu to mainwindow.cpp and adds the
on_actionImportDiveSites_triggered() method to prompt for the filename
to import from. The files are parsed and then any dive and trip data is
cleared before opening a dialog box to select which sites are to be
imported.
Signed-off-by: Doug Junkins <junkins@foghead.com>
ImportDiveSites adds the provided dive sites to the core dive site table
and stores the source data so it can be undone.
Signed-off-by: Doug Junkins <junkins@foghead.com>
For some reason openSUSE 42.3 updates keep timing out, causing these builds to
fail. Having a Qt5.5 and a Qt5.7 build should be sufficient for our purposes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Include text about dive site management. 5 new figures
are introduced. Writing this enabled me to appreciate just how
much time must have gone into writing the code.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
An interesting crash:
1) On the dive site tab select a dive site such that only one
trip is shown.
2) Unselect all dives.
3) Press CTRL-A while the dive list has focus.
4) This will select a trip.
5) In MainTab::updateDiveInfo() this will switch to the previous
tab active when in trip mode.
6) This will reset the filter.
7) This will reset the currentTrip field which we just set.
8) Since we just set the currentTrip field, we don't expect
it to change and reference a null pointer.
To fix, don't switch tabs when on the dive site tab. This also
improves user experience as there seems to be no reason to switch
away from the dive site tab.
Currently the index of the dive site tab is hard-coded - this
should be changed!
Fixes#2077
Reported-by: Doug Junkins <junkins@foghead.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Fixed bug in the Haversine function in get_distance() based on algorithm
at https://www.movable-type.co.uk/scripts/latlong.html and added bounds
to the 'a' term to avoid floating point errors for antipodal points.
Signed-off-by: Doug Junkins <junkins@foghead.com>
A number of objects in this file were global. Yet they weren't
used anywhere else. Don't export these symbols by making them of
static linkage.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
A copy of a C-string was assigned to a QString. The copy was never
freed. Instead, assign the C-string directly. This does the right
thing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
- Use a beginResetModel()/endResetModel() pair instead of distinct
addRows / removeRows pairs.
- Reuse the update function in the constructor().
- Let "rows" be the number of rows, not the number of rows minus one.
- Remove updateInfo() function as it does the same as update().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
- Use a beginResetModel()/endResetModel() pair instead of distinct
addRows / removeRows pairs.
- Reuse the update function in the constructor().
- Let "rows" be the number of rows, not the number of rows minus one.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The TankInfoModel and WeightInfoModel had biggerString() functions
to determine the correct column widths for the tank- and weight-type
columns. The users were removed around 2013. Remove these functions
and the corresponding member variable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
YearInfo is a trivial wrapper around "stats_t *". All the
constructor / destructor rigmarole seems completely unnecessary.
Remove it. Probably the whole class could be removed, but for
that I'd need more insight into Grantlee, which is low on my
list of priorities for now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
