Declare the function in the header file corresponding to the source
file where the function is defined.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Users might want to move their presets with there log-file. Therefore,
save the presets to the log. The alternative would be to save them
to the preferences. However, on the mailinglist it was decided that
moving the presets to a mobile device is a wanted feature.
The XML saving code has a rather reasonable interface, therefore
this turned out to be pretty easy to implement.
The filter presets are saved into a
<filterpresets>
...
</filterpresets>
block
Each individual preset is saved into a
<filterpreset name='...'>
...
</filterpreset>
Block with a unique name attribute.
Each preset contains zero or one fulltext and zero or more constraint entries.
The type and mode(s) are controlled by attributes, the "payload" is saved in
the block. Note that all the formatting is done by functions in core/filterconstraint.c
and not the parser itself.
A preset in the XML file might look like this:
<filterpreset name='test1'>
<fulltext mode='startswith'>Train</fulltext>
<constraint type='planned'>0,0</constraint>
<constraint type='sac' range_mode='range' negate='1'>5000,10000</constraint>
</filterpreset>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a table view that shows all presets and a button to delete
old presets. When clicking on an item, load the preset.
When the filter is reset, deselect any item.
Change the preset-loading code: instead of simply loading the
preset, select the preset in the table. Thus, it will be loaded
implicitly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a button to the filter preset widget that allows the
user to load a previously saved filter preset.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dialog asks the user for a name and warns if the name
already exists, i.e. an old filter preset will be overwritten.
Possibly, this should contain an auto-completion facility in
the case that the user wants to overwrite old presets.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add undo commands to add / edit / delete filter presets.
These are styled after the other undo commands: On changes,
the UI is informed by DiveListNotifier signals. Editing is
a simple std::swap of values.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Implement a trivial model to provide the filter preset names
to the UI. Sadly, for now this features the QWidget/QML
column / name dichotomy. However, in this simple case that
shouldn't be too much of an issue.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a rudimentary list of filter presets to the core. The list
is sorted by name. Access is provided via a C interface so that
the presets can be written to the git and XML logs. Internally,
the list is realized by a C++ vector for convenience (euphemism for
laziness).
Morover, a C++ interface is provided for the UI. Currently names of
the presets cannot be edited, since this would mean that the order
of the list changes. This may be implemented later if required.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Switch the mobile code to use the constraint-based filter. The one
thing that is still commented out is dive-site mode, since mobile
doesn't (yet) have a dive-site edit feature. And even if it had,
the dive list probably wouldn't be shown at the same time.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace the static filterwidget with a list of filterconstraints.
The first attempt of using a table widget failed, because Qt's
table delegates are dysfunctional. It's not that they are bad, they
just don't work at all.
Therefore, this code "simulates" a table in that on addition / deletion
of constraints it keeps track of the rows of all constraints so
that each constraint-widget can be associated with a row of the
constraint model.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This add a widget that represents a single filter constraint. Since
filter constraints are very general, the widget has to consider a
number of cases:
- numerical ranges
- star-widget ranges
- string lists
- multiple choice lists
Moreover, it supports units, which must be updated when the preferences
change.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a model that keeps track of a list of filter constraint and makes
them accessible from Qt. Sadly, this is mostly repetitive boiler-plate
code, but this is due to Qt's model/view-API, which is a perfect example
of how *not* to design a reasonable modern API.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Adds a filter constraint object to the core, which represents one
constraint the user can filter dives with. The plan is to write these
constraints to the XML and git logs. Therefore, this code is written
in C-style except when it comes to handling strings and dates, which
is just too painful in plain C.
There is one pointer to QStringList in the class, though when compiled
with C, this is simply transformed into a pointer to void. Granted,
that smells of an ugly hack. However it's more pragmatic than
self-flaggelation with C string and list handling.
A filter constraint is supposed to be a very general thing, which can
filter for strings, multiple-choice lists, numerical ranges and date
ranges.
Range constraints have a range mode: less-or-equal, greater-or-equal
or in-range. Text constraints have a string mode: startswith, substring
or exact.
All the data are accessed via setter and getter functions for
at least basic levels of isolation, despite being written with
a C-interface in mind.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
So far, the fulltext-query structure only saves an canonicalized
upper-cased version of the query. However, if we want to save the
fulltext query to the log (filter presets) or want to restore an old
fulltext query, we have to store the original query. We don't want
to confront the user with the mangled upper-cased version.
Therefore, also save the original version.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To support the new filter code, add helper functions that turn timestamps
into year and day-of-week to core/time.c.
Internally, these functions simply call utc_mktime() to break down the
timestamp and then extract the wanted value. This may appear inefficient,
but testing shows that modern compilers are quite effective in throwing
away the unneeded calculations. FWIW in this respect clang10 outperformed
gcc10.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The cylinder model is used both in the planner and the
equipment tab. We have three preferences for the pO2 that
is used to compute MOD: In the planner, there is one for
the bottom part of the dive and another one for deco.
Those are set in the planenr UI. There is another value,
controlled in the Tec Prefernces. That one should be
used in the equipment tab rather than the one from
the planner.
Fixes#2984
Signed-off-by: Robert C. Helling <helling@atdotde.de>
I think we only have one dive computer that supports GPS data right now:
the Garmin Descent Mk1. It reports the dive coordinates as "GPS1" and
"GPS2" for the entry point and exit point respectively.
Often GPS1 is missing, because the dive computer may not have gotten a
GPS lock before the diver jumped into the water, so when that happens
we'll use GPS2 for the dive site location. But when GPS1 exists, we
should prefer that.
And that's what we already did in logic in dc_get_gps_location(), but
for the initial dive site created at download time, we just picked any
divecomputer reported string that started with "GPS". And since GPS2 is
reported after GPS1 by the Garmin Descent, it would end up overwriting
the entry point that we _should_ have preferred.
Add the same kind of "explicitly prefer GPS1" logic to the initial dive
download case as we already had elsewhere.
Reported-by: @brysconsulting
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These are the instructions that I use at this point.
Removed a long obsolete script - it's been many, many years since that last was
useful (it was still using qmake to try to build Subsurface)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the dive timestamp changes, the dive could move in the dive list. But the
current dive actually doesn't change (it's still the same dive, right?). Yet
we need to update the dive list as well as the shown dive (especially if this
is after adding a dive, which is first inserted with the current time and then
updated with whatever the user enters).
Fixes: #2971
Suggested-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Update INSTALL to improve installation instructions for Fedora
and Raspberry Pi.
Fedora
Add 2 packages:
bluez-libz-devel
redhat-rmp-config
Raspberry Pi (untested)
Bump version numbers to Buster/20.04
Update package list to reflect Debian/Ubuntu
Added:
libbluetooth-dev
qtdeclarative5-dev
qtdeclarative-private-dev
Signed-off-by: Jason Bramwell <jb2cool@gmail.com>
When attempting to compile under Debian and Ubuntu the build script would get
stuck looking for bluez. This change adds libbluetooth-dev to the suggested
install packages for Debian and Ubuntu.
Thus update also changes the yum install command in the Fedora instructions to
the newer dnf command as well as updating the versions listed of Debiand and
Ubuntu to the latest versions.
Signed-off-by: Jason Bramwell <jb2cool@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
gcc complained about two constructs of the kind
remote_id && SSRF_INFO("...");
And while I am not a fan of excessive warnings, I must say
it has a point here. That's just code obfuscation. In fact,
it appears that the condition was wrong - the SSRF_INFO
should probably be invoked if remote_id is NULL. The way
it was written it would be invoked if it was *not* NULL.
Change both instances to unfancy if statements.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The water type strings were static and therefore passed through
gettextFromC::tr() before main(). One would hope to get a warning
in such a case, but this is not the case.
Therefore, use the QT_TRANSLATE_NOOP macro to register the strings
in Qt's translation system and translate the list when needed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The clock is only valid in ascent. In each cycle of the
'critial volume algorithm' it re-initialized to the
bottom time at the beginning of deco. So the time spent
on bailout should be added to this bottom time.
Thanks to Coverty for spotting this.
Coverity-scan: CID-362079
Signed-off-by: Robert C. Helling <helling@atdotde.de>
When an undo command selected invisible dives, a current dive outside
of the list of selected dives was chosen. This could have the very
unfortunate effect that the current dive was set, though not selected.
From an UI point of view this meant that the dive was displayed, but
edits would not be registered.
Change the setClosestCurrentDive function to select the current dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
At some time, when introducing the global reset signal the filter
stopped being reloaded when loading a new log. This leads to very
strange UI behavior: dives disappear when editing fields unrelated
to the filter.
Therefore, when reloading the model, reset the filter. One might
argue whether this is the correct place. On the other hand, we
might even make the filter a sub-object of the dive-list model.
Let's think about this.
Partially solves #2961
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
I had missed this one in commit d73e0a0fb4
("build-system/packaging: add bluez dependency for Linux builds").
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For Android the Qt Bluetooth code seems to work just fine. And for macOS
nothing appears to work right now, but at least the Qt implementation compiles
and links.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The Qt based implementation apparently got broken at some point and now fails
to connect to rfcomm dive computers like the Shearwater Petrel.
This uses the libdivecomputer rfcomm backend. Tested to work with bluez on
Linux as well as with the native Windows implementation.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
At least Shearwater Cloud seems to use multiple formats for sample time
recorded in the database. Sometimes the time is in seconds, sometimes in
milliseconds, and sometime it is something I have no idea about. Thus
switching to calculating the sample id myself and using sample interval
to calculate the actual sample time. Seems to be more reliable than
trying to guess what format Shearwater is using for this specific dive.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
ExifTools (and probably other meta-data editors) modifies the
mvhd creation date, but leaves the individual creation dates
in the tracks unchanged. Therefore, use the mvhd atom.
Reported-by: Eric Tanguy <erictanguy2@orange.fr>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This extends the uuid matching to the low-level characteristics too, so
that we can ignore the McLean Extreme characteristics that aren't
interesting.
It also renames the uuid matching to be about a "uuid_list" rather than
being about the service we're matching, since we're now using it for
other uuid's than just services.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Silly typo with a missing 'i' in 'uuid' that happened when I wrote this
code originally, and that compiled fine thanks to the error being
duplicated with cut-and-paste to all relevant places.
Fix it now, since I'll extend the uuid matching to the actual
characteristics for the McLean Extreme.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It turns out that contrary to what the documentation states, a few languages
are still only using the 'qt' translation. But those exist for all languages,
so we need to first search for the 'qtbase' translations, and only if that
fails do we try to load the 'qt' translations.
And even that will fail for languages in which Qt simply isn't localized (like
Dutch).
To make the code more readable, the check for 'US English' was moved earlier as
there is no point to look for a Qt translation for that (simply doesn't exist).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
