This is very much the same as in commit dc03b7e7d6 ("We need the correct
context to translate event names"). I didn't pay enough attention when
reading the bug report and missed that the weight system names were also
not correctly translated.
Fixes#312
(I hope this time for real)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Subsurface creates a lot of singleton instances on demand, but nothing
ever deleted them. Since they are singletons, these memory allocations
are technically not leaks. However, they clutter the output in valgrind
and other memory analysers, hiding the real issues.
The solution is to delete these items at exit. For the models and for
gettextFromC, the solution is to use a QScopedPointer, which will delete
its payload when it gets destroyed. For the dialogs and other widgets,
we can't do that: they need to be deleted before QApplication exits, so
we just set the parent in all of them to the main window.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When there are no trips at all, we have to skip the Yearly statistics
alltogether, including the header line (that should display all the
dives added together).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We now only use a slightly large font for the "Dive #" entry.
All other font sizes remain at 9px.
Another change is that we now attempt to use 11px for
individual row height. This makes the table at least 12px bigger
(n_rows * increment), but does not cut letters like 'g',
which go slightly bellow the font baseline.
Perhaps this can be improved later by adjusting the font
and row sizes again.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Use the same case for the first letter in the dive table column headers,
use '%' for both gases in the planner, and show "Start time" instead of
"Starttime".
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We update the values for divemaster, buddy and etc...
Rating and visibility are currently displayed as "x / 5"
values.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Following the new layout for the profile print, we separate
the used gas like so:
AL80 / EAN33 / ...
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
ProfilePrintPmode::truncateString() was not really needed,
because long text *should* be trunctated by the table itself.
Also we now are going to have multiple lines for notes,
so the auto-trim should work.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Previous show and save code would have aborted at the first invalid
weight system. This makes sure we save and show all weight systems up
until and including the last valid.
If we had:
integrated: 1kg
belt: 2kg
ankle: 3kg
And changed belt to 0 kg, we would have only saved integrated 1kg, and
nothing about the belt or the ankle weights. This will save all of them,
and show all of them.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previous code aborted at the first invalid cylinder. This instead finds
the last valid and prints all the ones up until that one.
Fixes#295
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds trip based statistics to the Yearly Statistics
view.
Signed-off-by: Miika Turkia <miika.turkia@nixu.fi>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I think we should actually fill the app with tooltips and
whatsthis hints. justsain ;p
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Better positioning of the text on the table cells. On KDE systems the
text got too near the line that divided the cells, this way the text is
placed on the middle of the cell.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a bit hacky and simply adds the title to the message text when
compiling on a Mac, but hopefully this will be enough.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Two errors fixed.
- With no location set, the summary line would start with a ','.
- When auto creating a trip for a manually added dive or when editing the
dates of dives in a trip, the timestamp for the trip was not updated
after editing the dive.
Fixes#293
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
O2 + He + N2 = 100%
(well, there are some other gases, but this is close enough)
Since N2 can't be negative that means we should refuse any change where
O2 + He > 100% (or o2.permille + he.permille > 1000).
Fixes#280
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The number 0 means "this dive has not been numbered". So manually
assigning this seems wrong.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user doubleclicks on the number of the dive in the dive list,
this will present to him a dialog to change that number. Pressing enter
will renumber the dive if there's no dive with the same number already.
Fixes#288
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch just reverts some wrong changes that I'v done on a
past commit ( sorry ) and correctly handles the selectDive,
by using a IDX instead of the dive pointer, as dirk told me
it's extremely error-prone since the pointer can change.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's very important when programming via Model/View, in gtk or qt,
to not mess with the model data outside of the model. We were
deleting stuff that the model controlled outside of the model, so
it thought that there was still data there. This fixes the deletion
part, but there are also lots of other parts that I'll tackle in
the next commits.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The air types model had a font bigger than the
other models, this patch creates a data() method
that correctly delivers the correct font.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
What happened before was that the AirTypes model was only being updated
when the user requested to change the air by clicking directly
on the Air, in the planner ( but not on the Air Table. ).
This fixes it by calling 'repopulate' whenever the cylinder model
changes ( by adding, removing and changing something.)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes the edition of alphanumeric input,
columns like depth accepted '23ft', '20m' or '30', with
an inplicit conversion to the unit. But the code ignored
that the input could have a 'ft' or 'm' ( ot anything else
for that matter.
Signed-off-by: Taiane Ramos <exhora.tat@gmail.com>
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- you can no longer delete a tank when its gas is in use
- therefore you can no longer delete the last tank
- when you change the gas mix of a tank, the corresponding segments in the
dive change as well
- when changing gas for a segment the correct available gases are offered
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
To make the planner work this adds a new column to the Cylinder widget
(depth - for the depth at which we want to change to a certain gas
during deco).
This also tries to hide that column in the equipment view and hide the
start/end pressure columns in the planner view. Oddly that fails :-(
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is intended to allow the user to provide the gases / cylinders that
she will be diving with. With that information the planner can warn the
user about insufficient gases, but more importantly it can show relevant
gases in the gas select drop down.
Right now the add cylinder button doesn't add a cylinder - that's a
problem.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
divelist.c:
get_dive_date_string()
get_short_dive_date_string()
get_trip_date_string()
MinGW support for *printf and parameter positions (e.g. %1$d)
is horribly broken. Instead of implementing *proper* support
for this feature Microsoft decide to ignore the standard (again)
and they implement new functions with the '_p' suffix,
such as 'sprintf_p', which seem to be available from a 2003 runtime.
To top that 'sprintf_p' is not really a 'sprintf' but rather
a 'snprintf'.
It seems that the MinGW people ignore the issue and do not provide
wrappers of any sort, or at least for the current recommended compiler
for Qt 4.8.5 on Windows - which is a 4.4.0. A note of warning;
inspecting how MinGW does certain things in headers such as stdio.h,
can ensue bad dreams or other negative effects on to the viewer.
This forces us to move the following functions from the 'back-end'
(divelist.c) to the 'front-end' (qt-gui.cpp) and use QString.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add units to the SAC in the print-out, reduce max depth in metric to one
decimal place, and leave some more characters of the notes to be printed..
Signed-off-by: Robert C. Helling <helling@atdotde.de
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Because of varying font (screen) DPI we use pixel sized fonts
when printing. Apparently 8px does not look that good on Windows
default fonts, but kinda OK on Linux. We compensate by
increasing the font size and table rows to 9px.
Also decrease the padding between the table and profile to 5px.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
CylinderModels::setDive() and WeightModel::setDive() have
potential to pass the 'last' argument to beginInsertRows() as
a negative number which triggers an assert that 'last' cannot
be smaller than 'first'.
Patch attempts to fix that by only calling beginInsertRows()
when there is at least one row to insert.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The end pressure was appearing in the column headed "O2"
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There are other models ( Tree Models and Model Items
) that are not affected by this commits, this is
already a good cleanup but it can be extended
to also fix those two other possibilities.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Second model converted to be less boilerplated,
there are right now 7 models that will need to
be ported. each model can remove around 30 to 40
LOC, so this is not such a bigger improvement,
but it's an 'keeping an eye on the future'.
Also fixed a bug where the returned value was dummy.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The Model View system in Qt is *very* verbose, this is the
beginning of a series of patches that will concentrate
the boilerplate somewhere and reduce the amount of lines
and will also try to make the code cleaner and easyer to
understand,
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
I just went thru all of subsurface code removing
some whitespaces issues and trying to make the
code prettyer, I also removed a few QString issues.d
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Add a helper function to unify the calculation of the
weight display string, instead of having the same calculation
in two places in the code.
Signed-off-by: Benjamin Fogel <nystire@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Subsurface stores weight values in grams. When displaying lbs,
the dive list was not rounding the converted weights up, but
rather truncating the value at the decimal place. The equipment
list was rounding the converted weights up. This gave two
different displayed values for the same weight value.
Signed-off-by: Benjamin Fogel <nystire@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a couple of classes and some other modifications
in PrintLayout that handle the printing of tables under a profile.
models.h : ProfilePrintModel
The class uses a 'struct *dive' to output all required data
for a certain dive at specific rows and columns. It also handles
font formatting and text alignment.
modeldelagatates.h : ProfilePrintDelegate
The class is used only for drawing a custom grid for profile tables.
PrintLayout::createProfileTable()
The function is used to create and setup the profile table object
PrintLayout::printProfileDives()
The function now has correct padding of dive profiles on a page
and also the printing of actual tables below them.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old code marked the dive list as changed on any
of the changes in the model, this was incorrect since
the user could just cancel the edition, wich means
that the divelist shouldn't be marked as changed at all.
when the user clicks on'accept', and the item is indeed
changed on the dive list, then we mark_divelist_changed
to TRUE
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added a 'changed' member on Cylinders and weigth models to mark when
one was changed or not. Only the changed data should be inserted on
the selected dives, so if the user changes the cylinders on a multi
edit, there's no need ( and it will actually break things if we did that )
set the weigths too.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
When updating the weight system model we have to remove the old ones and
then correctly count the new ones.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is correct C. But debuggers in C++ mode are broken and can't display
the global variables. While I hate having to do this change, I hate not
being able to debug my software because of broken tools even more.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code to initialize the weight systems from the last datafile loaded
had not been brought over from the Gtk version.
We now correctly update the data structure when loading file (but not yet
when editing values).
Most likely the same needs to be done for the tanks as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The current QTextDocument implementation is slow due to
HTML parsing. By using QTableView with QAbstractTableModel
we boost the performance of the table print drastically.
This patch completely replaces the old solution.
There is a hidden QTableView widget which is populated
with all data and rendered using a QPainter attached to
the printer device.
A couple of new classes are added in models.h/cpp
that handle the table print model and these are then used
in printlayout.h/cpp.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The Working Press didn't correctly updated when there was a 'bar'
or 'psi' in the string ( and that was defalt behaviour );
The o2 didn't correctly updated when there was a '%' on the string
(and that was default behaviour ),
The He didn't correctly updated when there was a '%' on the string,
and that was also default behavior.
Now all of them correctly updates.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This is a follow up commit to the previous one that
enabled cancel for cylinders, everything in the commit
log for the cylinders also applyes here.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Made the default 'Cancel' action correctly cancel
the cylinder edition. This is needed only because
we bypassed the default behavior on Qt that took
care of this, because we wanted to have more control
on how the view would update the items accordingly
with wich one of the cylinders were selected
on the edition pane - the pressure and size of the
cylinders needed to have it's data set, but the Qt
Model/View system *thinks* that cancel-edition is
simply 'do not commit the edition data, then.' wich
would not work with us, because we passed the strange
data already. So, I created a backup data that serves
us very well. When the user cancels, this backup data
is added back on the cylinder, making everything as
it was before.
[Dirk Hohndel: removed the inadvertendly added boost header]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes the combobox behavior on the inline edit
to what it was ( well, similar to ) the GTK version,
up and arrow keys will walk you to the list of choices,
and it will update the other data as soon as you walks over it
one drawback is that you cant ( for now, since I do have a
very big headache at the moment ) cancel, since the cancel
will just forgets the item and do not call 'setData' on the
model, but we already called it while walking on the list.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Add this helper so that we can easily wrap the required
memory release after calling get_dive_date_string()
(fixes a small memory leak).
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
So during my Maui trip, I had a short hiatus in diving, causing
subsurface to start a new trip for the last day of diving. I could have
just started the old gtk branch to fix it up, but decided that I might
as well try to implement the "merge trip" logic in the Qt branch instead.
This is the end result of that.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we don't have any manually set pressure data, show the data from the
samples instead. It uses an italic font for this case, mainly because I
couldn't figure out how to gray things out.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's just distracting. Leave it empty. No helium should be visually
very different from actual trimix, and for oxygen, zero means something
different anyway (it's air). In neither case is '0.0%' a good string to
show, just show it as empty.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes us use the same linear calculations as we did in the Gtk
branch. We don't take compressibility into account, since tank
manufacturers don't seem to either. A Luxfer AL80 is 11.1 liters, and
with the standard (non-compressibility) calculations, 80 cuft of air at
3000 psi is 11.094 liter, so that is the right model to use.
Also, stop with the horrible "units in edited numbers" stuff. It uses
up precious space, and doesn't look any better. If the user asked for
cuft, give him cuft without making a big deal about it.
Oh, and if the working pressure doesn't exist, sizes are always in
liters. That's what we did in the Gtk branch, that's what we do here.
Again, no reason to even bother stating units, it's not helping.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We do gas mixes in permille, not in percent. Some people really like
using the value they got from the analyzer, which is generally something
like 29.4% or whatever. So don't truncate percentages to integers.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since no one else approximates gas volumes at higher pressures, we
shouldn't do that either when converting imperial tank names (cuft @
working pressure) into wet volumes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I can't even begin to explain what got me to write this in the first
place. It makes no sense from any angle I look at it...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make the entries for years bold, keep the months non-bold.
It's still a sea of data, but this is an improvement.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit fixes two issues. One is that there were situations where
the code would read an uninitialized parent pointer, the second was that
instead of the monthly statistics the tree view would show the yearly
statistics again under the yearly entries.
I assume that the second part of the fix (initializing the parent
pointers) actually takes care of both of them (that patch was suggested
by Tomaz), but the first part that just makes sure the pointer is at
least initialized to NULL seems to be at least not harmful, so I kept it
as well.
With this the yearly / monthly statistics seem to be pretty much at
feature parity.
Fixes: #115
Suggested-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Display the units in the header, make the header more consistent
looking, convert the values into the right units with appropriate
precision.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This data structure was quite fragile and made 'undo' when editing
rather hard to implement. So instead I decided to turn this into a
QMultiMap which seemed like the ideal data structure for it.
This map holds all the dive computer related data indexed by the model. As
QMultiMap it allows multiple entries per key (model string) and
disambiguates between them with the deviceId.
This commit turned out much larger than I wanted. But I didn't manage to
find a clean way to break it up and make the pieces make sense.
So this brings back the Ok / Cancel button for the dive computer edit
dialog. And it makes those two buttons actually do the right thing (which
is what started this whole process). For this to work we simply copy the
map to a working copy and do all edits on that one - and then copy that
over the 'real' map when we accept the changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Yearly stats are being displayed. the code is similar to the GTK one,
but I advise the reader that it's a bit risky ( I got an unreproducible
crash but it seems to be fixed now. ). The selection behavior is *weird*
and I have no idea why, but I'm very sleepy - will try to look at
it again tomorrow.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This simply creates a view to show the model, while doing that
I noticed that the model header wasn't showing, so I fixed it too.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This is the fisrt bunch of compilable code for the new Yearly Statistics
there's nothing to see here, move along...
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
So, I changed a lot of code to reduce boilerplate on models in the
future. Currently we do not have a lot of models, but this can increase
quite rapdly. There's a second TreeModel in the works, the Yearly
Statistics, this patch will save around 250 LOC for this new model,
and more and more models will give us a greater saving.
Iwll do that for the table models in the future too - I did the tree
models now because they are the most complex case and I didn't wanted
to create a second tree model without this.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Make the columns on Cylinders edit and Wheight Edit to
have sane values for 'type', this is needed because the
old behavior was to set it fixed size, and the default fixed
size was silly. this calculates a good predefined value
taking the font size in consideration.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Better handling of default sizes on the Cylinder and weight widgets,
the weigth widget didn't had a CSS applied so it looked odd compared
to the cylinder one, also the default behavior for the combobox delegate
didn't worked very well with the css applied, being too small.
this patch fixes that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The models were a bit messy - some of them got the correct font,
other didnt. This patch creates a new function 'defaultModelFont()'
that is being used to return the font in all cases now.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The Qt branch didn't set the preexisting dive count, so matching old
dives didn't work and it always downloaded all of them.
Also, we need to autogroup dives before displaying them if autogrouping
is on.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Implements the divelist to behave like linus explained,
essentially, it filters the layoutChanges of the model,
greps for trips, and for each trip that it finds, it set
the 'firstColumnSpanned' property, to make the column
to have the size of the whole table. e
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Ok, so this sounds insane, but it fixes our currently broken sorting
of dive trips vs plain dives not in trips.
The reason for that is simple: the dive trips are sorted by date, but
that's column #0, and for plain dives is the dive number.
So currently the trip-vs-dive sorting looks at the date of the trip,
and compares that to the number of the dive. Since the date of the
trip is expressed as seconds-since-1970-in-UTC, unsurprisingly the
dive number is generally much smaller (even for some very avid divers
;), and so the plain dives end up sorting way at the bottom (or at the
top, if you do "oldest trips first"
Since the dive number *should* sort as the date, this stupid attached
patch just makes us return the dive date instead.
Now, there are other possible solutions to this:
- make the date of the dive be column 0, and make the dive number be column 1.
Quite frankly, while more logical for this particular problem, it
probably sucks as a solution. We do want to have a column we can sort
dives by that is date-based, but doesn't include trips. And while the
dive number *should* sort identically to the date one, the fact is
that you can have dives without any numbering, so it doesn't.
In contrast, all dives have dates, and sorting numbered dives by
date should still result in sane behavior (and if it doesn't, then the
insanity comes from the dive numbering, and odd sorting is the fault
of the user and indicative of a problem)
- We could possibly do something magical like sorting dives by number
when they are inside trips, or when no trips exist at all. But then
we'd sort by date when there are trips and the dive is outside the
trip. But quite frankly, that just sounds insane.
So on the whole, I don't love this patch, but it seems to be the least
confusing of the possibilities.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The GTK version seems to be bugged on this, since the dialog
doesn't save the dive computer nickname that I setted, but
the Qt version shows less dive-computers than the GTK one on the
same dive. I want somebody to do a quick review of my code too. :)
I also plan to remove the 'OK' and 'Cancel' buttom, they seem to
be overrated on this dialog - fairly uneeded.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Created a new dialog, Edit Divecomputer, it will currently only lists
the divecomputers that are used on the xml file. I used the same method
that the gtk version used, but only 2 divecomputers got visualized in the
dirk dive data. I'll assume that it's correct and will fix it in the next
couple of commits.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
In commit beb4ed38f264 ("Add a "sort role" for sorting the dive list")
Linus forgot to add a case for the rating value.
Now all columns sort correctly.
With this I think we can close the bug...
Fixes#111
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Tomaz convinced me (with help from Linus) that it might be a good idea
to go with the compacter "single line" case statements in some specific
instances where this makes the code much more compact and easier to
read.
While doing that I changed Linus' code to do 'retVal = ...; break;'
instead of just 'return ...;' - this is more consistent and makes
debugging a little easier.
And while doing all that, I also cleaned up divelistview.cpp a little bit.
And removed an unused variable.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
By default, sorting is done by the display role, but then we end up
sorting by the string we display, which is almost always the wrong thing.
So this adds a new "SORT_ROLE" that is used for sorting, and then the
data lookup can return the raw data we want to sort by.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code adds the possibility to make the DiveList behave
like a Tree or a List, depending on what layout is set.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
My attempts to actually set the width of the columns with the
SizeHintRole all failed - so I gave up on that and am forcing things to
work by making the texts in the header somewhat longer and then resizing
to that. Definitely not what I wanted to do - but that plus reducing the
font size gives us a much more reasonable / compact look.
I really hope that someone else can explain to me how to get the
SizeHintRole to affect the width (and not just the height - that part
worked just fine) of a the cells in a column. Then we can replace this
hack by a much better solution (that won't fail if the translated strings
look different).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit fixes three different things:
- a memory leak in WeightModel::setData()
- getSetting() calling strdup() on a QByteArray
- a possible usage of memory after deallocation
Here's an explanation of the last issue (taken from the mailing list, slightly
adapted):
toByteArray(), as well as others "toSomething()" methods, returns
a new object which the compiler allocates on the stack. The compiler
will consider it a temporary data, and destroy it on the next line. So,
when one does
char *text= value.toByteArray().data(); // line 1
if (strcmp(description, text)) { // line 2
the compiler creates a QByteArray on line 1, calls ::data() on it, which
returns a valid char *, and assigns its value to "text". So far, so
good. But before jumping to line 2, the compiler destroys the temporary
QByteArray, and this will in turn invoke the QByteArray destructor,
which will destroy the internal data. The result is that on line 2,
"text" will point to some memory which has already been freed.
One solution is to store a copy of the temporary QByteArray into a local
variable: the compiler will still destroy the temporary QByteArray it created,
but (thanks to the reference-counted data sharing built in QByteArray) now the
destructor will see that the data is referenced by another instance of
QByteArray (the local variable "ba") and will not free the internal data.
In this way, the internal data will be available until the local variable is
destroyed, which will happen at the end of the {} block where it is defined.
Please note that when one uses the data in the same line, one doesn't need to
worry about this issue. In fact,
text = strdup(value.toString().toUtf8().data());
works just fine.
Signed-off-by: Alberto Mardegan <mardy@users.sourceforge.net>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We now detect if a weight / cylinder with this description exists and if
not add it on the fly. We also remember the additional values (weight and
size / workingpressure) for new entries and take the values for these
fields into account when autocompleting.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is very much analogous to the way cylinders are implemented.
That means that just like with cylinders, if the user enters a new type
and hits 'tab' before hitting 'enter', Subsurface will crash.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With this we should have tank editing mostly done.
See #122
(it's not quite fixed, we need the equivalent code for weight systems)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I had to immprove the TankInfoModel with two new methods,
insertRows and setData, because the delegate used this
model to show what kind of Tanks we are offering.
Since the user can enter a new type of Tank, it's important
to add this tank to all lists using the delegates.
I Also added two new methods on the delegate itself,
to correctly shows the data, and set the data on the
model. This also will help dirk with a working example
on how to edit things while using a delegate.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This is a fun one.
We only want to mark the divelist changed if the user actually changed
something. So we try really hard to compare what was entered with what was
there and only if it is different do we overwrite existing values and
record this as a change to the divelist.
An additional challenge here is the fact that the user needs to enter a
working pressure before they can enter a size (when in cuft mode). That is
not really intuitive. We work around this by assuming working pressure is
3000psi if a size is given in cuft - but then if the user changes the
working pressure, that changes the volume. Now going back and changing the
volume again does the trick. Or enter the working pressure FIRST and then
the volume...
This also changes the incorrect MAXPRESSURE to WORKINGPRESSURE and uses
the text WorkPress in English (Gtk code used MaxPress which was simply
wrong - this is just the design pressure or working pressure, not some
hard maximum. In fact, people quite commonly "overfill" these tanks.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds basic editing functionality for Cylinders and Weigthsystems,
it still doesn't use delegates to show the data to the user in a better
way, and it does not take in consideration user preferences yet, but
it's a starting point.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
So, the Cylinders and Weigthsystems got a new Trash icon,
and the interface already intercepts the clicks ( on all
columns ) and send this to the 'remove' method on boch
models. On the model I'm just filtering the indexes that
are not 'DELETE' and creating a stub method to be filled
later.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch adds support showing and for editing weigthsystems in the equipment tab,
so, now the two things that are missing are 'edit' and 'delete', wich are quite easy to do.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
i
Added the code to show the cylinders from a dive,
this code also already permits additions from the
interface, so the user can click 'add' and insert
what he wants there.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This makes the DiveList be similiar to the GTK one, comparing
the size of the text. The current code makes text on the
table be 30% smaller.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The weight management widget added 500 grams / 0.5 lbs
when a new entry was added.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A nonexisting temperature (mkelvin==0) was displayed as -273°C.
Weight was always displayed with an extra 500 grams/0.5 lbs.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Cosmetic commit to clean up some of the annoying typos in qt-ui
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And rip out all the code that Dirk put there to do that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A left click in the treeview header leads to a call to createIndex which
results in a null pointer dereference.
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Establish some useful helpers and use them when updating the values.
One of the helpers (from statistics.c) puzzlingly doesn't link - so that's
ifdefed out.
Also had to re-arrange the settings reading code (it came too late) and to
extract the expanding code of the top dive from the settings reading code
(as it had no business being there to begin with).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was written with massive hand-holding by Tomaz - actually, this was
mostly proposed via IRC by Tomaz and then implemented by me...
Right now because of the list-of-lists nature of the model we have the
small issue that every trip starts with a dark background dive, even if
the trip itself has a dark background.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code seems rather crude to me. I'm sure this could be done better.
This also makes the column alignment work again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now the list and dives will work in the same way that the GTK
version does. The code got changed heavly because the old one
was just looking at the dives and didn't worked like a tree.
small adaptations on the list view and model delegates because
of the changes done on this model.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
For the stars on the dive table I had to rework a bit my
StarRating widget, because it used a pixmap for each widget
that were created. Not it uses only 2 pixmaps: the active
and inactive ones.
A new file was created named modeldelegates(h, cpp) that
should hold all delegates of the models. For the GTK / C
folks, a 'Delegate' ia s way to bypass the default behavior
of the view that's displaying the data.
I also added the code to display the stars if no delegate
is set ( good for debugging. )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Thanks to commit bdbfdcdfa0fb ('Ask Qt 4 to use the UTF-8 codec as the
"codec for C strings"') we no longer need the explicit UTF-8 conversion
when creating QStrings from char *.
Suggested-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Just use the dive struct directly.
Suggested-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The DiveItem constructor had 13 variables. By passing it the full
dive we reduce that to 2.
[Dirk Hohndel: changed to use "struct dive *" instead of just "dive *"]
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We have these data structures for a reason. They provide context
about the units used and prevent mistakes. And of course they
are used everywhere else so we should use them here, too.
This also tries to display some more data and make things look
a bit more like the Gtk version when it comes to alignment and
formatting.
My guess is this will make Qt developers' eyes bleed. My apologies.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Amend the DiveItem class to avoid float in favour of int. Add getters
which return display friendly QStrings reflecting user preferences for
(e.g.) depth.
Modify DiveTripModel to support controlled alignment by column; right
align for depth and duration.
Fix problems with utf8 encoding on rating stars, degree symbols and
O2 subscript.
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Moves the DiveTrip model related code to models.h
The DiveTripModel was implemented in three parts:
DiveTripModel.h
DiveTripModel.cpp
MainWindow.cpp (the code to populate the model)
This patch changes the DiveTripModel from it's original
implementation to the file models.h, wich should store
all models (Dirk requested the Qt developers to not create
2 files per class, but instead to use a file for functionality,
and data-models are one functionality.)
Besides that, this code cleans up a bit the style:
removed operator<< for .push_back, const references where they apply,
moved the internal DiveItem class to the .cpp since it should be visible
only to the DiveTripModel class, and redesigned the current interface of
the model to be identical of the GTK one (used the UTF8-star and 2
subscribed, for instance).
Amit (the creator of the original code) should comment here if it's ok
with my changes.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the code that will load and populate the Tank Info
ComboBox that`s used by the user to select the Cylinder
description.
Code curerntly implements more than the GTK version since
the GTK version of it was a plain-list, this one is a
table based model that can be used in ListViews ( like
we use now in the ComboBox ) but also in TableViews
( if there`s a need in the future to see everything
that`s catalogued in the Tank Info struct. )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The Qtr_ hack isn't needed as in commit 720fc15b2dcd ("Introduce
QApplication") had already made sure that we are using gettext.
I didn't revert the two commits as I wanted to keep the added header
comments and fix the tooling in the Makefile as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should wrap gettext nicely and replace the "_()" macros we use in C
code.
Also added comments to the top of all the new files.
Suggested-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
1 - Open File already open files, it tries to not break the Gtk version,
but some methods on the GTK version still need to be called inside Qt
because the code is too tight-coupled.
2 - Close file already close files, same comments for the open file dialog
applies here.
3 - The code for adding new cylinders in the cylinder dialog is done,
already works and it's integrated with the system. There's a need to
implement the edit and delete now, but it will be easyer since I'm
starting to not get lost on the code.
4 - Some functions that were used to convert unities have been moved to
convert.h ( can be changed later, put there because it's easyer to
find something that converts in a convert.h =p ) because they were
static functions that operated in the GTK version but I need those
functions in the Qt version too.
[Dirk Hohndel: lots and lots of whitespace and coding style changes]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
