We had a user request to allow for setpoint changes
at certain depths for CCR deco.
You can now enter a cylinder with name like
"SP 1.4" ('S' and 'P' and ' ' and a float) with
a switch depth and that cylinder is interpreted as
a depth dependent setpoint switch.
This user interface is a hack. But I believe that such
setpoint changes are similar enough to gas switches during
deco and should thus be handled in a simiar manner.
I would be happy to hear ideas how this could be made
less easter eggish.
Suggested-by: Justin Ashworth
Signed-off-by: Robert C. Helling <helling@atdotde.de>
We already had the script to post-process the HTML files in the repo,
but we didn't automate use of that script in the Makefile. The .wp
suffix is misleading and historical (we no longer us WordPress), but
it's what I am used to and I didn't come up with something more obvious
or better.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Better image placement, other small changes.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes all the font sizes relative and avoids odd effects on some browsers.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way they don't exceed the page size.
This also removes execute bits from a couple of pictures. That's just wrong...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The application state is a desktop-only thing. The mobile UI
also has its application state, but that is something completely
different.
The last remaining user of the application state was to flag
whether the planner is active. Since this has all been
unglobalized, the ApplicationState structure can be moved
from core to the desktop UI. And there it can be made local
to the MainWindow class.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is not needed anymore, since the planner passes down the
in_planner flag to the appropriate functions. The planner state
is not queried via a global anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The TemplateLayout prints different dives depending on
whether the planner is active. Instead of accessing a
global variable, pass the status down from the MainWindow.
That's all quite convoluted, since there are multiple
layers involved.
On the positive side, the in_planner() function has now
no users an can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To remove reliance on global state, pass an "in_planner" argument
to AbstractProfilePolygonItem::replot(). Thus, calls to in_planner()
can be removed.
This is a bit sad, since the in_planner argument is now passed
to numerous replot() reimplementations of classes derived
from AbstractProfilePolygonItem. However, it is only needed
for one, viz. DiveGasPressureItem. Well, perhaps in the future
more features will depend on the planner mode...
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
AbstractProfilePolygonItem::shouldCalculateStuff()'s definition
has been removed some time ago. Therefore, remove its declaration.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To remove reliance on global state, pass an "in_planner" argument
to decoMode(). Thus, calls to in_planner() can be removed.
This is a more-or-less automated change. Ultimately it would
probably be better to pass the current deco-mode to the affected
functions instead of calling decoMode() with an in_planner
parameter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To remove reliance on global state, pass an "in_planner" argument
to clear_deco(). Thus, calls to in_planner() can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To remove reliance on global state, pass an "in_planner" argument
to vpmb_next_gradient(). Thus, calls to in_planner() can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To remove reliance on global state, pass an "in_planner" argument
to add_segment(). Thus, calls to in_planner() can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
As the title says. This is a first pass because I cannot see what it looks like
on the mobile device if it has not been pulled into master. I need to see what
size the images have on the mobile screen and how the organisation of text above
and below the images is rendered. There will definitely be a second PR to refine
the content for the mobile screen and to ensure proper integration of the
statistics section with the overall user manual..
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
This will use only the country name for the location field in
divelogs.de export. The old version concatenated all the fields
together. This is inline with Rainer's new import functionality.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Allow the user to restrict the analyzed dives based on the
current selection. One button restricts to the current selection
and one button resets the restriction.
Thus, the user can for example select bars in the bar chart
or a range in the scatter plot and perform statistics on
these sets.
The restriction works on top of the filter.
The UI can certainly be improved, but it is a start.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For all the series but the scatter series (which supports
lasso selection), implement a range-selection using shift.
The code is fairly similar for all series and one might
think about factoring it out. But why bother?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Multiple selection using ctrl was only supported for
scatter series. Factor out the corresponding code and
use it in all series.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Up to now, we passed a "shiftPressed" flag to the individual
selection functions. To be more general replace by a struct
with "shift" and "ctrl" flags.
While doing this:
1) Move the struct into a new statsselection file for better
encapsulation.
2) Change shift to control in the scatter series, since individual
selection of items is usually done with control, not shift.
Shift usually means "select range".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In analogy to the other charts, highlight selected pie slices.
Overlay them with a checkerboard pattern, like in the bar charts.
Since all charts now support highlighting, the divesSelected()
virtual function now doesn't need a default implementation
anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This flag existed for historical reasons: The base of bar items
had no line and therefore the lines had to be draw differently
for horizontal (base to the left) and vertical (base on the bottom)
item.
This did not work properly and therefore has been removed. Thus,
the flag became pointless.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When all items of a bar in a bar chart are selected, highlight them
by overlaying with a checkerboard pattern. A gray checkerboard seems to
work reasonably well, regardless of base color.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Allow the user to select regions of the scatter plot using
a rectangular selection. When shift is pressed, do an
incremental selection.
Unfortunately, the list-selection code is so slow that this
becomes unusable for a large number of selected dives.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Somewhat improve selection mechanics in the scatter-plot by
allowing additional selections with shift-clicking. When the
dives under the mouse are already selected, then deselect them.
This appears to be a rather common UI idiom in desktop
applications.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
As a visual feedback, show the selected dives in the scatter
plot. React to application-wide selection changes. Currently,
the dive list is deactivated while in statistics mode, but
that may change.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When clicking on items in a plot, select the corresponding
dives. This can be useful for data validation.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It is crucial to replot the statistics when dives are
added / removed, to avoid stale pointers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To make box-and-whiskers charts selectable (select corresponding
dives when clicking on box), save the dive list with the quartile
data.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If we want to make bar charts selectable (when clicking on a
bar select the dives the bar represents), then we must store
the dives behind bars. Therefore, use dive-based bins instead
of count based bins in bar charts and pie charts. This gave
some churn because every structure where a count is stored
has to be changed to store a vector of dives. Try to use
move semantics where possible to avoid duplication of dive
lists.
On a positive note, the count_dives() function of the
binners can now be removed, since it is unused.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In TemplateLayout, there was a progress indication, which reported
the progress - not of the actual rendering - but of adding the
dives to the "to render" list. Which is of course done in less than
a ms, making the whole thing completely pointless.
Instead, emit progress when actually looping over the dives or
statistics.
Nobody ever noticed the problem because even rendering is done in
fractions of a second and indeed is accounted to only one fifth
of the total progress.
The real purpose of this "fix" is to get rid of the getTotalWork()
function, which was just insane. Instead of asking the TemplateLayout
how many dives it rendered, this number was extracted from
global state. Simply store the number of dives in the TemplateLayout
object instead.
Moreover, fix two coding style issues:
- "Page" variable identifier starting with a capital
- The Printer::render() being defined (as opposed to declared) with
a default parameter. This is not how C++'s default parameters work,
sorry.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There was never an icon passed to this function. Therefore,
remove the parameter and the code that depends on it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The icons shown in the dive list were rendered for every single
access. Render them only once. This supposes that the
defaultIconMetrics structure does not change once the icons are
rendered!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Style is always tricky. This is really complex material. This attempts
to slightly personalize the language and make it less academic sounding,
while not removing any of the attention to detail and actual content of
this manual section.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While version numbers are really rather random, we decided that with the
new statistics feature we will change the version number to 5.0.
Reflect that in the manual.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Update the user manual to take into account the statistics tool.
This is a first attempt.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
The subtraction of half the label width, needed for centered
labels, must have been lost somewhere.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Placing labels at half-integer values gives horrible
rendering artifacts. Therefore, always round to integer
values. The easiest way to do this is right before setting
the position. Introduce a helper function to round QPointF
in such scenarios.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On first startup, use the splitter values suggested by Dirk:
Top/Bottom: 60/40
Info/Profile: 50/50
List/Map: 60/40
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The profile must be replotted when the dive mode changes.
Weirdly, this was routed via the dive-information tab
(making it inherently non-mobile compatible). Detect
such a change directly in the profile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
