In both places in the UI where we show the date of a dive during
download we are actually pressed for space. So let's use the short
version of the date string to save some space.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Most divecomputers download data dive by dive - so we get reasonably
frequent updates during the download (as new dives are found and posted
in the progress text area). But some (like the G2) download all of the
new dives at once and only then start parsing them. As a result the
download can look like it is hung.
As a compromise this shows updates on the data received in 10kB
increments. Which for most cases should never be shown and therefore not
make the user experience any worse - but for cases like the G2 will make
a huge difference.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt 6 will drop support for QRegExp.
Use QRegularExpression instead.
The exactMatch in getVersion() was rather bogus, given the pattern.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt 6 will drop support for QRegExp.
Use QRegularExpression instead.
The syntax for matches and captures has changed and needed to be
adjusted.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt 6 will drop support for QRegExp.
Use QRegularExpression instead.
The syntax for matches has changed and needed to be adjusted.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt 6 will drop support for QRegExp.
Use QRegularExpression instead.
The syntax for matches and captures has changed and needed to be
adjusted.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt 6 will drop support for QRegExp.
Use QRegularExpression instead.
Much of this is a simple replacement of one class with the other, but
there are some changes to the way matches are tracked and captures are
created. Also, the exactMatch now needs to be implemented via anchors in
the regular expression itself.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt 6 will drop support for QRegExp.
Use QRegularExpression instead.
This is a straight forward replacement without any other code changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt 6 will drop support for QRegExp.
When looking at replacing this use of a QRegExp it seemed like a much
better idea to simply switch to utilizing the taxonomy data instead.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The docker container for Tumbleweed has been broken for a while now.
Given the Hirsuite gives us Qt 5.15 testing, I guess it makes sense to
drop Tumbleweed for now.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Builds started to fail because v2.2.2 (about 18 months old) couldn't be
found anymore. That issue seems to have been fixed, but it was a good
reminder not to get completely disconnected from upstream here.
This switches things to the currently latest version of the Android USB
library (which coincidentally will also provide support for additional
USB-serial chipset - not that I think that any dive computers will
benefit from that).
Some of the interfaces changed in the upstream Java library and our code
had to be adjusted to accomodate this.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If cmake is called multiple times we can end up with a recursive set of
symbolic links that can confuse package build scripts.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In trying to avoid the wrath of the Google Play police I ended up giving
up too many permissions. And while in my test installs things continued
to work, in new installs on Android 10 or newer the lack of
FINE_LOCATION permission resulted in BLE scans no longer working.
The frustrating thing is that apparently installing an update with a
different set of permissions isn't enough to trigger either the bug or
the fix (at least not reliably). What appears to work is to uninstall
the existing app and then do a fresh install of a new app with the
correct permissions.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fix a pair of warnings, which annoyed me for a long time:
For some reasons prefs.bottompo2 is an integer (mbar)
whereas prefs.modpO2 is a float (bar). This results
in mixed integer/floating point arithmetics when
conditionally using either of them. And ultimately
a warning, when storing a mbar value as an integer.
Fix this by an explicit cast to int after converting
modpO2 to mbar.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On Android devices that no longer get updates to the system installed
SSL root certificates, the user can easily install the updated Let's
Encrypt root certificate, but that is only used by Subsurface-mobile if
we explicitly allow the use of those user installed root certificates.
Fixes#3335
Suggested-by: Greg Hunter
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Air is a special gas that does not contain oxygen according
to gasmix.o2.fraction. If you want to use the fo2, you
need to use get_o2() to treat this special case correctly.
This fixes a bug when setting the MND of a gas containing
21% oxygen when o2 is considered not narcotic.
Reported-by: Christoph Gruen <gruen.christoph@gmail.com>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
In commit 105b60389c ("mobile: remove GpsLocation reference from qmlmanager") I
was a bit careless with the code removal and unintentionally also removed the
initialization of the progress callback. With this change the updates from the
download process are once again shown on screen in the mobile app.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we found an invalid sensor (referring to a non
existing cylinder) in fixup_dive() the sensor-id was
set to NO_SENSOR.
This led to invalid XML files, because the code decides
to switch into legacy mode. However, there are two
pressure readings, which is invalid in legacy mode.
Therefore, also clear the pressure data.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The camera sync feature has been moved above the Ok and Cancel buttons
and given its own descriptive header. The checkbox to ignore unaligned
image timestamps has been moved closer to the buttons.
Signed-off-by: Tim Segers <tsegers@pm.me>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The QTimeEdit field is severely limited when it comes to the supported
time range. By coding our own input / validation we can allow far larger
time shifts. For simplicity, this always assumes hours:minutes format.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When using the camera sync feature to sync media to the dive timeline,
the calculated time difference was considered invalid if it was more
than 24 hours.
To prevent this, this commit disables the manual time offset input
fields when the camera sync button is clicked. It then uses the epoch
difference in the final offset calculation, enabling arbitrary time
differences between camera and divecomputer.
Signed-off-by: Tim Segers <tsegers@pm.me>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This tries to make our fingerprinting code work better, by avoiding
using the "deviceid" field that has always been unreliable because we've
calculated it multiple different ways, and even for the same version of
subsurface, it ends up changing in the middle (ie we calculate one value
initially, then re-calculate it when we have a proper serial number
string).
So instead, the fingerprinting code will look up and save the
fingerprint file using purely "stable" information that is available
early during the download:
- the device model name (which is a string with vendor and product name
separated by a space)
- the DC_EVENT_DEVINFO 32-bit 'serial' number (which is not necessarily
a real serial number at all, but hopefully at least a unique number
for the particular product)
but because the model name is not necessarily a good filename (think
slashes and other possibly invalid characters), we hash that model name
and use the resulting hex number in the fingerprint file name.
This way the fingerprint file is unambiguous at load and save time, and
depends purely on libdivecomputer data.
But because we also need to verify that we have the actual _dive_
associated with that fingerprint, we also need to save the final
deviceid and diveid when saving the fingerprint file, so that when we
load it again we can look up the dive and verify that we have it before
we use the fingerprint data.
To do that, the fingerprint file itself contains not just the
fingerprint data from libdivecomputer, but the last 8 bytes of the file
are the (subsurface) deviceid and the diveid of the dive that is
associated with the fingerprint.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
That seems to be the way to force it to not request FINE_LOCATION or GPS access.
If I leave this on 'auto' then the dependency on QtPositioning (for showing the
map) appears enough for it to claim access to GPS location. I no longer want
to deal with the Google Play police for that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Only used in context of acquiring GPS locations with the mobile app, which
we no longer do.
Keep the DiveAndLocation structure around as that's needed by the
ApplyGpsFixes command.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
