This is a feature that had been requested a few times in the past and when
debugging my "show only used gases" commit I realized that this would have
been extremely useful to have...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The hardcoded position we previously had would make the text invisible
if a ceiling was drawn during the middle of the dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit b8d31d8534b ("Show ceilings for individual tissues") Robert
inadvertently broke the connection from dc_ceilings to red_ceilings and
also didn't correctly enable the checkbox for all_tissues when
calc_ceilings was already set in the preferences before the dialog was
created (and therefore the connection in the .ui file isn't run).
There's also a simplification / cleanup to the code deciding whether to
show all the tissues.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I think that displaying tissue loadings either as pressure or as
percentages is not very intuitive but that it makes much more sense when
translated to ceiling depths.
This change enables just that for the 16 tissues in our calculated ceiling
and visualizes this in the profile graph.
There is a checkbox in the preferences to turn this on. If enabled, all
tissues having non-trivial ceilings are also shown in the info box.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the red dc ceiling as preference option.
Hooked them all up together so the sub-preferences are enabled when the
master preference is set (for 3m and red ceiling).
Use the options in the profile plotting functions.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The biggest problem here was that bool has different sizes in C and C++
code. So using this in a structure shared between the two sides wasn't a
smart idea.
Instead I went with 'short', but that caused problems with Qt being to
smart for its own good and not doing the right thing when dealing with
'boolean' settings and a short value. This may be something in the way I
implemented things (as I doubt that something this fundamental would be
broken) but the workaround implemented here (explicitly using 0 or 1
depending on the value of the boolean) seems to work.
I also decided to get rid of the confusion of where gflow/gfhigh are
floating point (0..1) and when they are integers (0..100). We now use
integers anywhere outside of deco.c.
I also applied some serious spelling corrections to the preferences
dialog's ui file.
Finally, this enables the code that selects which partial pressure graph
to show.
Still to do: font size, metric/imperial logic
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This had been bugging me for a while - the label texts were all not
quite where I expected them to be. I think this looks much better now.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The imperial/metric super setting doesn't have any effect. But changing
the individual units now works and is tracked. And causes the display to
change after clicking "OK" (but not yet when clicking "Apply").
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This had been disabled by some redraw optimizations in commit
81406b80c6ec ("Fix loading a second dive, after the first file was
loaded."). We need to redraw the plot not only if the dive changed but
also if the selected divecomputer changed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes loading a second dive-file after the first
one had been loaded. it simply clears some information and
makes sure that the current selected dive is invalid when
the file closes. I also did a bit of code cleanup on this one
to make things simpler in the future.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On some maps, the lack of setting up the dc before plotting
the dive-computer nick caused a division by zero, breaking
the correct visualization of the dive.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Cosmetic commit to clean up some of the annoying typos in qt-ui
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
That threshold is of course ridiculous and arbitrary - but it seems like a
good assumption to make that anything below that is DEFINITELY not valid
data.
Because of the way the scene grows automatically in Qt, printing these
texts would squish the profile into one thin line.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The string we print is lame, but it keeps things consistent (and prevents
us from dereferencing functions in uninitialized objects).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Align statistics tab labels as per infotab.
Amend helper function to show degree symbol for temp measurements.
Change order of member initialisation list to match order of decl
(ProfileGraphicsView::ProfileGraphicsView)
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The items are still being placed far from each other when
zooming in - I need a bit of help with the math for that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Passing the alignment as int instead of float or double was actually a bug
as CENTER is defined as (-0.5) ...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Passing the alignment as int instead of float or double was actually a bug
as CENTER is defined as (-0.5) ...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code enables Zoom in / Out with the Wheel,
and it also enables panning by moving the mouse around.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Created a default pen that has 'cosmetic' enabled,
A cosmetic line doesn't change it's width no matter
what zoom level we apply.
Also , changed everything that used a line to have
that as default pen instead.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Plot the numbers on the left of the profile.
It seems that everythign is being plotted -
But I can see that there are coordinate-errors on the
code. ( the GTK one plots some curves below of the
dive, but the Qt one is overlapping - probably the
way that I'm using the gc information)
Need to investigate a bit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch plots the PP text, but when I plotted I realized
that the gc.pi.mapp is being calculated wrong, probably
something went wrong on the calculations - it's comming
zered always. So, only one line & text is plotted.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
a few code was moved around, a macro that contained
the form of x ? : y; had to be rewritten to x ? x : y
since c++ doesn't allow ternarys without the middle operator.
The color-choosing for the Cylinder Pressure broke
on the Qt port - but it's a small issue.
I'm painting everyone as 'dark green' now, will
fix that later.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Tomaz' code had a fixed height per tooltip item and some rather suspicious
logic how to position them (and how to size the surrounding box), based on
a fixed height in pixels per item - which of course fails if you use
larger fonts or multi line items.
This uses the bounding rects to correctly calculate the sizes and populates
the tooltip with the other dive data that we already had in a helper
function.
This also fixes a small formatting issue for gas change events.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make the graphics_context part of the ProfileGraphicsView and remember
that the plot info is already a part of the graphics_context (we kept
passing around both of them in the Gtk code... pointless but a leftover
from before adding the pi to the gc...)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When I changed the way that the tooltip box behaved,
I accidentaly 'ate' the mouseMoveEvent, it was being
used only to show tooltips instead of everything
that it should have. this simple patch fixes it.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch changes the Event drawing so it can display tooltips. It is now
the responsibility of the item to show / hide a tooltip.
A bit of code-refactoring got on here too because I was using only
QGraphicsItem calls and I wanted to use a hover in / hover out event
to show / hide the tooltip.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The tooltips now can:
1 - be moved around the canvas
2 - dynamically expand / retreat when a new tooltip is added.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Beautification of the triangles done, Tooltips are also displaying
Some rework on the code - don't know if dirk will accept, I'v changed
an if-else-if-else by a ternary operator, since it improves legibility
a little bit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There are subtle differences, the Cairo version looks
prettier - but that's fixable. I did a small triangle
and a exclamation mark on it. maybe a gradient would
make a good difference there.
this item has a ItemIgnoresTransformation tag, so
scalling, rotating or zooming will not change it's
size.
The tooltips are not yet ported.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The plot_text function from the cairo-methods are now ported
on the qt version. this patch moves around some code since
quite defines are already used and I didn't want to reinvent
the whell.
Original code used varargs, but I prefered to change it
, so now it receives just a reference to a QString object
and the string must be constructed before sending,
using the .arg methods.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There are a few regressions, mostly because the text
is not being plotted yet and the background of some
of the curves are not being applied.
This is because QGrapdien is based on the coordinates
of the items that I wanna paint, but I'v setted a
QGradient that's global and doesn't take this into
consideration.
all curves are being plotted. in Small resolutions
they plot bad. but it's just a matter of redrawing
in the correct resolution.
the Line widths are being hardcoded now, on the cairo
version they weren't, this will need a bit of porting
too.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This version already plots the dive-graph, with the
gradient and all that jazz. One thing that will be
easily spotted is that the size of the line is very
thick - easily changed, I'm just using the default.
As soon as everything is plotted correctly I'll
fix the lines.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The mean depth now is plotted correctly.
I wanted to do more stuff on this commit, but since
it required that a few things on profile.c got moved
to profile.h, commited to not have a huge blob for review.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The first plotting method was removed from profile.c
to profilegraphics.cpp and some conversion ( almost 1 to 1 )
was made so that the code could work.
Since the code is big - this commit has just a part of it
working - it plots the grid. but already works for testing
the resizing of the window and Zooming ( unimplemented )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Started working on the Qt version of the Plot, initially
nothing is printed - but this is not a bad thing,
the program doesn't explodes too. :)
some work had to be done about the 'bool/gboolean' stuff
so I removed all gbooleans in the code that I'v encountered.
A new file was created ( profile.h ) so I could put the
signatures of helper methods that cairo used to call.
till now the code computes the max limits.
Next patch the first drawing will be made.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The colors on colors.h were done to fill a special
struct by Subsurface - I removed that structure and
replaced the code that generated the map of colors
to a QMap. I know that this changes are not very
'welcomed', but C++ has issues on creating & initializing
complex static members, this was the best way that I could
think of.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This small patch adds a new class - ProfileGraphicsView
it's a QGraphicsView based class that will holds all
graphics-items for the plotting.
The setup is simple, just call ui->ListView->plot( dive ) ( that's
already a ProfileGraphicsView and magic will happen.
Since Im using a QGraphicsView , the size of the canvas doesn't
matter and I'm fixing it at 0,0,100,100. when a resize is done,
the resizeEvent will be called, fitting the scene's rectangle on
the view.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This version already plots the dive-graph, with the
gradient and all that jazz. One thing that will be
easily spotted is that the size of the line is very
thick - easily changed, I'm just using the default.
As soon as everything is plotted correctly I'll
fix the lines.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The mean depth now is plotted correctly.
I wanted to do more stuff on this commit, but since
it required that a few things on profile.c got moved
to profile.h, commited to not have a huge blob for review.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The first plotting method was removed from profile.c
to profilegraphics.cpp and some conversion ( almost 1 to 1 )
was made so that the code could work.
Since the code is big - this commit has just a part of it
working - it plots the grid. but already works for testing
the resizing of the window and Zooming ( unimplemented )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Started working on the Qt version of the Plot, initially
nothing is printed - but this is not a bad thing,
the program doesn't explodes too. :)
some work had to be done about the 'bool/gboolean' stuff
so I removed all gbooleans in the code that I'v encountered.
A new file was created ( profile.h ) so I could put the
signatures of helper methods that cairo used to call.
till now the code computes the max limits.
Next patch the first drawing will be made.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The colors on colors.h were done to fill a special
struct by Subsurface - I removed that structure and
replaced the code that generated the map of colors
to a QMap. I know that this changes are not very
'welcomed', but C++ has issues on creating & initializing
complex static members, this was the best way that I could
think of.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This small patch adds a new class - ProfileGraphicsView
it's a QGraphicsView based class that will holds all
graphics-items for the plotting.
The setup is simple, just call ui->ListView->plot( dive ) ( that's
already a ProfileGraphicsView and magic will happen.
Since Im using a QGraphicsView , the size of the canvas doesn't
matter and I'm fixing it at 0,0,100,100. when a resize is done,
the resizeEvent will be called, fitting the scene's rectangle on
the view.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
