The dive site structure in the UDDF export was using an old structure
where each site is simply listed as a <dive_site>.
The new structure requires a single <divesite> containing at least one
<divebase> - a base location where you are diving from, and at least one
<site>.
As subsurface only tracks sites, I've created a single divebase to be
referenced by all of the sites.
Note: although profiles in Subsurface can be grouped into trips, these
are groupings of profiles, not sites, and the mapping may not be
simple. e.g. on different trips the sames sites may be visited but a
different base used. Or, different bases may be used on a single trip.
Signed-off-by: Marton Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Part of a series bringing UDDF export closer to the UDDF standard, as
per www.uddf.org.
Currently when exporting to UDDF buddy entities are created
one-per-unique-combination. This means that a group of buddies on a dive
are exported as a single buddy, with the names comma separated.
This patch identifies all unique buddies, whether used independently or
along with other buddies on a dive. They are then linked independently
on each profile.
It also uses the UDDF standard <link ref=""> instead of
<buddy_ref ref="">
Signed-off-by: Marton Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When opening the filter dialog we allow the user to filter the choices
that are shown. The text that they enter in that filter for filter
criteria should be treated as case insensitive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
No idea why this code was there... but what it caused was an invalid
access to checkState[-1] when a dive had that first tag. This explains why
sometimes the dives that had that tag were shown, regardless of whether
the selected filter criteria should have excluded them or not.
Fixes#769
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Includes Extra data tab, show cylinders button, and Dc configuration.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace four more figures.
Replacement complete up to end of section:
Import data from dive computer.
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This needs to be the same string as used for the entry in the Import
dialog... since translate() is a macro in this .c file and defined to have
only two arguments, I'm using the NOOP3 macro to get this correctly added
to the translation sources, including the comment. That makes the code a
little odd, but seems to work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Let's use implicit anchor for the Appendix A. This will get rid of
compilation error when trying to create PDF version of the user manual.
(Otherwise all the other links to Appendix A would have to be updated.)
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We are quite inconsistent when it comes to reporting back errors.
One case where this caused somewhat unexpected behavior was when the
user would try to open a .csv file by passing it as command line
argument. The file was silently ignored, but treated as if it had been
opened successfully.
Now we issue a somewhat reasonable error message.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Seems that there was not enough space reserved for the whole mem buffer
when adding XML tags around CSV file. When unlucky, the metadata of
memory allocation was overwritten.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This update concerns:
Import of dive logs from Suunto DM5
Configuration of dive computers
Description of main menu items
One figure has been added
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The Stinger stores the alarm time in seconds, instead of minutes as the
Vyper does it. This corrects for that.
Reported-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The successful message was emitted in a some what older way then the
other messages so it was always emitted, even on error.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a bit ugly fix to make sure the right error message reaches the
user in case of being unable to open the device.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Data read from a divecomputer is moved inside the divecomputer tag
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This tries to grab the used cylinders when in open circuit mode.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Shearwater describes the current mode with tag currentCircuitSetting,
thus we should record the ppO2 only when in CCR mode.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the decision if a dive segment should lead to a line in the
diveplan, we need to differentiate between the lastdepth (the
depth of the last dp to tell if we are currently stopping) and
the last depth that we printed a line for (needed for gaschange
lines). Without this patch, no stops without gas changes were
listed anymore in the diveplan.
Like the last patch for the diveplan: I hope this time I got this
logic right.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Update to user manual text, including Cylinder bar at bottom of profile as well as
Extra Data tab.
A few smaller sentence-level updates scattered throughout the text
New pictures.
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
799e22ea0c3f20 in libgit2 renamed a function, which
breaks our build. To fix that we check the current version
and if the USE_LIBGIT21_API definition was used.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This changes the code so we include all the cylinders from a previous
dive when we re-plain a dive.
Otherwise we would have a hole in the cylinders table when we plan a
dive based on a dive where we have unused cylinders, and it makes more
sense to copy all of them rather than not.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use our the decopo2 from preferences for mod/switchdepth calculations
when re-planning a dive or planning a dive based on a previous dive.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The implementation of import for DM5 removed the profileBlob from SQL
query, thus breaking the backward compatibility on import of old dives.
Need to have bot profile and sample blobs within the query...
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A profiler session in the planner shows that for deep long dives
a significant amount of CPU time is spent in populate_pressure_information()
which interpolates the cylinder pressure graphs.
This patch introduces a "fast" flag for the replot of the profile
which is active while the mouse button is still pressed and that
suppresses this calculation.
In the future, this flag could be used for other responsiveness tunings
of the plot.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The CSV/TXT import is working well now, the XML file is just causing
confusion.
Suggested-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
"Converted" DM4 logs are not actually converted, only the database
structure is updated. According to Rainer we should be able to read the
dive profile from the old format in this case.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If DM4 log file is converted to DM5, the sampleBlob is empty.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Oops, I thought I had done that but that was flat out wrong.
Now the source upload shrinks from over 70MB to around 26MB. Much better.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These files knowingly (one might say, intentionally) violate the spirit
and letter of the Debian / Ubuntu packaging rules. They are intended to be
able to create our own packages that include their own libdivecomputer,
libgit2 and (later) libmarble. Especially for daily builds this is WAY
easier than fighting with whatever may be the current version of these
packages in Ubuntu (especially since this allows us to use our private
libdivecomputer branch).
This assumes that the user runs the make-package.sh script from a
directory below which we have
subsurface/ <- Subsurface checked out git tree
subsurface/libdivecomputer <- desired libdivecomputer sources
subsurface/libgit2 <- desired libgit2 source
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
