Linus change in commit bcb9f67819bc ("Make the notebook portion (dive
notes/equipment/info) a scrollable window") created a really ugly default where
the notebook Dive Notes always ended up with a vertical scrollbar. This picks a
much saner default layout for the panes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes things start up with the wrong size, which is somewhat
annoying, but by doing so avoids a bigger annoyance, namely that the
three panes move around when moving between dives.
In particular, if the initial dive didn't have much of an equipment
list, the initial size allocated for the notebook is fairly small and
determined mainly by the size of the the Dive Notes page. However, when
you then scroll around in the dive list, you might hit a dive with lots
of equipment, and suddenly the panes dividing the different parts of the
subsurface application window will jump around to make room.
That's horribly annoying, and actually makes things like double-clicking
dives in the dive list not work right, because the first click will
select it, and cause the dive to move around (so the second click will
hit a totally different dive).
Now, making the notebook be in a scrollable window means that if the
size of the notebook changes, it might get a scrollbar, but the panes
themselves do not move around.
The initial sizing of that thing being wrong is annoying, though. We
need to figure out a separate solution to that.
[ Side note: currently it uses GTK_POLICY_NEVER for the horizontal
scroll-bar, just to avoid the horizontal size also starting out wrong,
which is *really* nasty. If we can solve the initial size issue, we
should make the horizontal scroll-bar be GTK_POLICY_AUTOMATIC too. ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The "filename" variable was only initialized when the user accepted the
name, so cancelling the file save would randomly use an uninitialized
pointer.
Reported-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull miscellaneous fixes, mostly UI stuff from Mikko Rasa.
Both this and the pull from Pierre-Yves Chibon created a "Save As" menu
entry and logic. As a result, there were a fair number of conflicts,
but I tried to make the end result somewhat reasonable. I might have
missed some semantic conflict, though.
Series-acked-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
* 'misc-fixes' of git://github.com/DataBeaver/subsurface:
Add a separate "Save as" entry to the menu
Changes to menu icons
Improved depth info for dives without samples
Divide the panes evenly in view_three
Add a "Save As" entry in the "File" menu allowing the user to specify the file in which to save
the data. This is useful as we no longer offer this option through the "Save" entry while the data
had been opened from an existing file.
Signed-off-by: Pierre-Yves Chibon
So far, when trying to quit while the data was changed the offer
was "Save" or "Don't save". Now, you can also "Cancel" which will
bring you back to the main window.
This allows you to re-save the data in another file.
Signed-off-by: Pierre-Yves Chibon <pingou@pingoured.fr>
When a file is opened, we keep it in memory and when you try to
quit while the data has been changed, propose to save back to
this same file.
Signed-off-by: Pierre-Yves Chibon <pingou@pingoured.fr>
Instead of having "Show Temp", "Show Cyl", etc in the Preferences dialog,
rename the group as "Show Columns" and remove "Show " from all the
checkboxes. The dialog is tighter/nicer this way.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Pull dive-trip grouping from Dirk Hohndel:
"This turned into an updated pull request for the tree2 branch where I
implemented the date based grouping - but is actually a very different
topic: this adds the ability to edit multiple dives (and fixes some
issues with the dive editing overall). The reason for that is that it
reuses some of the infrastructure that I implemented in the tree2
branch for tracking the selected dives. More details in the commit
messages."
* 'tree2' of git://git.hohndel.org/subsurface:
Switch from date based to dive trip based grouping
Redo dive editing
Fix selecting and unselecting summary items
Apply sort functions to the correct model, don't select summary entries
Maintain selected rows when switching between list model and tree model
Create duplicate list model so sorting by columns works again
Improve tree model implementation
Allow date based grouping
This commit addresses two issues:
We now can add / edit / delete equipment from the edit dive dialog
We now can edit multiple dives at once
The latter feature has some interesting design constraints:
It picks the 'selected_dive' as the one to start the edit from - so if
this dive already has some information filled in, that information needs
to be overwritten before it is stored in all of the dives. Similarly, only
changes to the cylinders or weightsystems are recorded. Also, the notes
field is not editable in the multi dive edit mode (as that didn't seem
useful).
The workflow seems to work best if using the multi-edit right after
importing new dives from a dive computer. The user then can select all the
new dives and only needs to edit things like location, divemaster, buddy,
weights, etc. once.
This commit will create some obvious conflicts with the commit that adds
exposure protection tracking. It was implemented on top of the tree_view
changes as it reuses some of the infrastructure for tracking the selected
dives.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For simplicity and shortness, throughout subsurface exposure protection is
simply referred to as "suit".
Add the fields to the data structures, add the column to the dive_list
and the preferences dialog (once again with it being turned invisible by
default). Support loading and saving of the suit information.
Display the suit information in the Dive Info pane (this may be a bit
controversial as people could argue this should be in the Equipment pane)
and allow editing of the suit info, with our usual support for completion
and drop down lists to pick from.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds the total weight carried on the dive in different weight systems
to the divelist. The column is by default not shown, which can be changed
in the preferences. The column is sortable.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The "Save" entry will now automatically save over the last used file. If
no filename has been set, then that entry will also prompt the user for a
filename.
The filename is set when saving as well, so the next save will use the
same filename.
Signed-off-by: Mikko Rasa <tdb@tdb.fi>
It's customary for menu bars to not have icons.
Some items were lacking icons when there's perfectly good stock icons
available. I was a bit torn between the "new" and "add" icons for the
"add dive" item, since what it really does is create a new dive, but
the "add" icon is an uninteresting sheet of paper in the default icon
theme so I decided to use the "add" icon.
Signed-off-by: Mikko Rasa <tdb@tdb.fi>
No need for right-clicks. It's inconvenient on lots of laptops etc, so
allow just using the Dive menu as an alternative.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This does mean that you have to build subsurface against a new version
of libdivecomputer, and that version is likely going to have various
slightly incompatible changes. But the new interfaces allow for easily
adding new supported dive computers without subsurface having to be
updated for each new vendor and model, so some slight pain is definitely
worth it this time.
I'm not even going to try to have some backwards-compatible version
here, the libdivecomputer interface changes are so extensive. Native
enumeration of devices is just the smallest part of it: the constants
and types that libdivecomputer uses now have much nicer names that all
start with DC_ or dc_, so you don't get the kinds of name clashes we had
with "gasmix_t" etc.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is really annoying to have to type the device name each time you need
to import a dive from your computer, if you are not using the default
device name. This will save the device name in the configuration file and
matches the logic currently used to save the dive computer name in the
configuration file.
Signed-off-by: Terrance Stanfield <t@hollowcranium.com>
Instead of using printf() to print the string updates ("Parsing sample
data" etc), introduce a function to show those strings in the graphical
progress bar itself.
Subsurface hasn't been a text-mode application in a long time ;)
This partially fixes the second todo entry from commit b0ba22a068
("Show dive import error messages in the import dialog") and generally
makes for a more helpful import - at least for the largely error-free
cases.
Sadly, the messages that really come from within libdivecomputer itself
(like "suunto_vyper2.c:193: Failed to receive the answer.") when things
go really wrong are not caught. libdivecomputer does have a notion of a
logfile (set with "message_set_logfile()"), but that ends up being
really inconvenient.
Maybe we could use some pipe setup or something. Oh well.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was a todo item in commit b0ba22a068 ("Show dive import error
messages in the import dialog") which made the import dialog able to
retry the import on errors.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sure, you can import a file too, but it really makes more sense to have
the actions related to importing new logs under "Log", I think. I don't
think of it as a file operation.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
.. not in the main window. And leave the import dialog open, so that
you can either try doing it again, or cancel. This makes it much easier
to re-try a failed dive import, and actually makes the failure more
obvious too.
Todo:
- make the "Ok" button change to "Retry" when an error happens
- try to see if we can catch the actual status update messages from
libdivecomputer and show them too in the import dialog. Right now
they are printed out to stderr by the library.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Always having to re-select the same dive computer got really annoying
when I had trouble importing the dives. Let's not force the user to do
that, since we could just remember the last dive computer used, and
default to that one.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On Linux and MacOS the subsurface_close_conf() doesn't really close the
config file (it flushes writes on MacOS), but on Windows it does
actually close the registry hkey.
Which is bad, if you change the settings multiple times - we assume that
the config file is open the whole time.
So add a "subsurface_flush_conf()" function, and call *that* when
changing configuration parameters. And call the close function only at
the very end.
Alternatively, maybe we should just open the config file separately
every time. I don't much care, maybe somebody else does.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull weight management from Dirk Hohndel:
"This is the fifth or sixth version of this code, I'm begining to lose
track. I still struggle with the balance between code duplication and
unnecessary indirectness and complexity. Maybe I'm just not finding
the right level of abstraction. Maybe I'm just trying too hard.
The code here is reasonably well tested. Works for me :-)
It can import DivingLog xml files with weight systems and correctly
parses those. It obviously can read and write weight systems in its
own file format. It adds a KG/lbs unit default (and correctly stores
that).
The thing I still worry about is the code in equipment.c. You'll see
that I tried to abstract things in a way that weight systems and
cylinders share quite a bit of code - but there's more very similar
code that isn't shared as my attempts to do so turned into ugly and
hard to read code. It always felt like trying to write C++ in C..."
* 'weight' of git://subsurface.hohndel.org/subsurface:
Add weight system tracking
Fix up some trivial conflicts due to various renaming of globals and
simplification in function interfaces.
- supports multiple weight systems per dive
- supports multiple weight system types
- supports import of weight as tracked by DivingLog
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If at least 2 dives are selected, show statistics of these dives on
Overall Stats. Otherwise, show the statistics of all dives. Temperature
is also added to the shown statistics.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Minor change to avoid adding statistics.h (moved the global variable and
external function declaration to display-gtk.h).
Another minor change to the text displayed for the "Stats" notebook page.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We're going to eventually import non-xml files too, so let's begin
splitting the logic up.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We have local variables or function arguments with the same names as
function static variables (or in one case, function arguments).
While all the current code was correct, it could potentially cause
confusion when chasing bugs or reviewing patches. This should make things
clearer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move the About and Preferences menu item to the App menu.
Switch the accelerator key to be Meta (i.e., Command) instead of Control
This required a bit of restructuring of the code, but it's all for a good
cause.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
To do this a few things needed to move into the os specific files, but the
overall change is fairly small and the difference on the Mac is amazing.
Subsurface now becomes a Mac app with Mac toolbar and useful default
fonts.
Changed the CFBundleIdentifier to be the reverse DNS of the subsurface
site (sadly, 'torvalds' is not yet a TLD).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far we hard coded /dev/ttyUSB0 - which is a good starting point in
Linux but not so useful on Windows or MacOS. This was now moved into one
of our OS helper functions with (somewhat) reasonable defaults.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Right now the options are "Save" and "Cancel". I wrote that code and it
always bugged me - "Cancel" could mean that I want to cancel the the whole
operation, i.e. that I don't want to quit after all. Showing "Save" and
"No" seems much more logical.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
They were never intended to be sortable, but using common code with the
dive list picked up that "sort by index" thing by mistake.
If we really want to be able to sort cylinders by O2 percentage (which
really doesn't seem to make much sense, considering that you usually
have just one or two cylinders) we will need to also handle the case of
editing the (differently sorted) cylinder table. Which we don't do now.
Reported-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested by Henrik Aronsen, and seems much more natural. Especially
with lots of keyboards having function keys oddly mapped.
Suggested-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently just tied to F1-F4 (for divelist, profile, info, and "all
three" respectively), which is just crazy. But using "ctrl-P" for
"Profile" isn't sane either, that's the standard printer keyboard
shortcut. So what would be good keyboard shortcuts for these things?
I also wonder how I can get gtk to shut up about the fact that a pane
becomes too small for the contents of that pane? We very much want to do
that, and it's very intentional. Gtk does the right thing apart from
the whining (and apart from the visually ugly part of a widget that
doesn't fit, but making it pretty doesn't really seem possible).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The profile colors were defined all over the place, so I put them all in one spot. I'm unsure if this is the best solution to that problem, but I guess it's a step in the right direction.
Signed-Off-By: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
It doesn't make sense with the new three-pane layout, and I don't think
we're reviving it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds tested code for Linux and Mac OS, implementing the api that
Linus suggested.
The Windows code was moved into its own file, but hasn't even been compile
tested, yet.
In order to have just one interface to set or get a preference value we
encode TRUE as (void *) 1 and FALSE as NULL. This works consistently on
all platforms and regardless of whether we have 32 or 64 bit.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I'm not happy with it, but it looks good and works better than the
alternatives I've looked at so far.
So why not happy? It's not configurable, and gtk really doesn't do a
great job with the case of notebook widgets that are shrunk to be
smaller than the contents (the cut-off gets ugly, and is outside the
notebook page!)
But committing as a way to keep track of this, and let Dirk use it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus noted an odd "CRITICAL" warning when ripping off a page of the
notebook and then dropping it within the same notebook.
Turns out we need to simply accept a drop on ourselves and gtk does the
rest correctly.
I also fixed the fact that we incorrectly declared the callback as 'void'.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* 'add-info-stats-page' of git://github.com/dirkhh/subsurface:
Add Info & Stats page to the notebook
Even more places with pressure and volume conversions
Further cleanup of pressure and volume conversions
Use unit functions to get column headers, add unit function for pressure
More consistency improvements
Add new helper function to get temperature and unit
