Till now we have been building against a previous built of subsurface.
This was handy and fast, but there is a huge drawback in this approach
because we were including a lot of unneeded dependencies (e.g. marble
or serial-ftdi), some of which are, indeed, optional.
With this patch, a stripped down version of susbsurface is built and
used to link in smtk2ssrf.
The bad news are that this - almost unusable - version of subsurface
overrides any preexisting binary, so the user has to rebuild.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Switch to a newer SHA, so that at least my commit is in. Checked
the newer version, and no other artefacts seen. I think we
should try to follow master where we can (but controlled).
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Following master is just not healthy. We need to be more deliberate
in which version we built against. An update in the last 24 hours
broke Subsurface-mobile again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This reverts commit 893ff019dbabf356a477da0bdf7d954123759018.
Thanks to the amazing support from Marco Martin the theming issue in
Kirigami master has been fixed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This extends the hack in commit 2e057bc29a ("QML UI: hide action button
when keyboard is visible") to the left and right button as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is based on a script that Lubomir worked on and sent to the mailing
list.
Suggested-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Build in a 'build' subdirectory and use the INSTALL_ROOT. Also make sure
you find qmake on custom Qt installations.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The source code is pulled from the forked repository at:
git@github.com:Subsurface-divelog/googlemaps.git
It's rebased if needed, build using 'make -j4' and then
installed.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Until we get some solution from upstream this patch to Kirigami hides the action button when the keyboard is visible.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
libdivecomputer asks pkg-config for the include paths for libusb-1.0 and
hidapi, but then uses #include <libusb-1.0/libusb.h> and <hidapi/hidapi.h>
which fails as those directories are part of the include path. So we
manually add include paths without that last directory as well as a work
around.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I really want to build against 10.10 so as many people as
possible can use the binaries I create, but regular users
might not have the older SDKs installed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds the right handle icon that is needed for the swipe list items not to report an error when activated.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
We use a little script to create the code snippet. This script in return
relies on comments that were added to the latest libdivecomputer source
(in the Subsurface-branch).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Using the Homebrew dependencies is much easier and faster, but then
we run into the problem that Homebrew always builds against your current
OSX version. This instead allows us to build the dependencies ourselves
and set the SDK / minimum OSX version. This is mainly important for
binaries that we want to distribute.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On Mac we want to make sure that we don't only run on the OS that
we were built on, but all the way back to 10.10 (that's the oldest
that Qt supports).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we already explicitly point at one Qt installation, don't override
with another one.
Also, support all the way up to Qt 5.9.1
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now that we support this for many dive computers, that seem reasonable.
I'm not happy with the icon, but couldn't figure out a better one in the
breeze icon set.
See #426
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I can't believe this slipped through my review. How embarrassing.
Credit goes to Anton Lundin for spotting this.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is some very early and hacky code to be able to access BLE-enabled
dive computers that use the GATT protocol to send packets back and forth
(which seems to be pretty much all of them: a vendor-specific GATT
service with a write characteristic and a notification characteristic
for reading).
For testing only. But it does successfully let me download dives from
my EON Steel and my Scubapro G2.
NOTE! There are several very hacky pieces in here, including just
"knowing" that the write characteristic is the first one, and the
notification characteristic is second. The code should actually check
the properties rather than have those kinds of hardcoded assumptions.
It also checks "vendor specific" by looking at the UUID string
representation, and knowing that the standard ones start with zero.
Crazily, there doesn't seem to be any normal way to test for this,
although I guess that maybe the uuid.minimumSize() function could be
used.
There are other nasty corners. Don't complain, send me patches.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some people (like me) have Qt elsewhere. So long as qmake is in PATH,
we should be able to support it.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order to avoid surprises with things suddenly breaking, check out
the release tag of Kirigami 2.1 for now. We still need to track what's
happening in Kirigami, but this was Marco's advise as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I clearly forgot to do that prior to the last release - and of course
we needed to add special handling for Seabaer. And to make it more
obvious that the files themselves shouldn't be edited, let's add some
comment to that extend to the two files as well.
Closes#375
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The build script was cloning the Sursurface branch of libdivecomputer from the "old"
location. Use the new github based location from now on.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Completely adapt to the api changes of OverlaySheet in Kirigami2
in order to achieve the same look and behavior for the dive
edits that had with kirigami1
Port most components to QtQuickContrls2, except comboboxes
in the dive edit sheet that will need a new control type
Signed-off-by: Marco Martin <notmart@gmail.com>
Move it to packaging/android where it belongs
Use direct URLs to download Android components
Make sure required packages are installed (only tested on Ubuntu)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Right now this is only designed for Linux where current distros all should have
a new enough libgit2 (and our instructions tell people to install this with
system tools, so we should also use it).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It appears that sometimes autoreconf will not install ltmain.sh and
subsequently fail; simply running autoreconf again appears to be a
workaround.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This (plus an update to kirigami.pri, a patch for which I just sent
to the plasma-devel list) allows the iOS version of Subsurface-mobile
to build again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Just link it directly into Subsurface-mobile. That's what we already do
with the qmake file for iOS, now the cmake based builds do the same. This
should remove a lot of issues.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When only building the mobile version, we don't need to build marble.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Run all scripts with -e so they exit as soon as something breaks. That
way the build stops at the first error, not some other error.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now kirigami needs to be built with a C++ plugin.
In cases of mobile operating systems such as iOS (and in a lesser measuse,
Android) having a proper plugin loaded at runtime may be difficult, so
statically link it together with all of its qml files compiled as a
qresource inside the static library.
Signed-off-by: Marco Martin <notmart@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Having subsurface-core as a directory name really messes with
autocomplete and is obviously redundant. Simmilarly, qt-mobile caused an
autocomplete conflict and also was inconsistent with the desktop-widget
name for the directory containing the "other" UI.
And while cleaning up the resulting change in the path name for include
files, I decided to clean up those even more to make them consistent
overall.
This could have been handled in more commits, but since this requires a
make clean before the build, it seemed more sensible to do it all in one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This just allows the script to be used when you are working locally on
Kirigami to test changes - no point in waiting for a pull from upstream
then. The only goal is to copy the files over.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This merge was a bit more challenging given how far things had diverged,
but I hope I got it mostly right.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Otherwise /usr/include does not exist on a clean-ish install
Signed-off-by: Jeroen Massar <jeroen@massar.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And preserve that path in CMAKE_PREFIX_PATH and pass it along to cmake
Signed-off-by: Jeroen Massar <jeroen@massar.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Somehow the file test with ~ interpolation does not work
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Currently, when running the packaging/android/build.sh from a source
tree that has been used for desktop builds, libdivecomputer wants a
make distclean. This is inconvinient, and is caused by building
libdivecomputer in source. Now, configure and build libdivecomputer
in a new subdirectory, allowing to run the android build script
from the same source tree as the desktop (both desktop and mobile)
builds.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Grmbl. SUBSURFACE_EXECUTABLE now doesn't get set until later in the
script. So let's just trigger this explicitly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit f28f03afe2 ("build.sh: make it easier to build
Subsurface-mobile") I mistakenly broke the logic that decides to run the
mobilecomponents.sh script.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The script now takes a -mobile argument, or -both and then builds the
mobile version or both versions. To make things more consistent across
different invocations the desktop version is built in the "build"
directory and the mobile version is built in "build-mobile".
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make the default build a DesktopExecutable, with an option to set a variable for doing a mobile build.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch reworks the navigation of the dive details.
- The detailsview is now a list view with page-sized delegates. This
allows horizontal swiping to the next and previous dive.
- The central button now allows to open the edit mode for the dive.
Original patch was done by Marco Martin, but needed to be reapplied by
hand.
Signed-off-by: Sebastian Kügler <sebas@kde.org>
