Lots and lots and lots of header files were being included without being
needed. This attempts to clean some of that crud up.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Update O2 metabolsim rate and adopt default gas switch depths to
pSCR oxygen drop.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will crash if for some reason current_dive is invalid.
And in general, when displaying information, we want to use the correct dc
in the displayed_dive, not the current_dc, which references the
current_dive...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When changing to a CCR dive, add a setpoint change to the default setpoint
at the beginning of the dive. Otherwise add an explicit setpoint change to 0
.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The accepting mode variable must be initialized to false to allow
editing of dive data.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On Ubuntu 14.04 the edit mode does not exit successfully when applying
the changes. It instead jumps back to edit mode (even though hiding the
option to apply/discard changes again). So let's just have a flag to
prevent faulty behavior.
Fixes#786
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was silly; if we rely on this to be zero to indicate no change then
we better zero it out when we start editing.
Fixes#805
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We zero out the displayedTrip and only copy changed data into it; so a
NULL value is not deleted text, it means there was no change.
Fixes#805
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now that we set the margins everywhere, the manual corrections here aren't
needed. At the same time, the spacing for the labels looks better if it is
a tiny bit more generous.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way we are sure that the upload was made in the correct folder.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move from the Dive List context menu to the Dive Info tab, it will only
appear when connected to Facebook.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't want to waste space, but we don't want things to be too crammed
together, either. Especially not having horizontal margins for text can
look very awkward.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Before you could 'Cancel' the edit and then would be asked if you wanted
to 'Discard' your changes or 'Cancel'. So clicking 'Cancel' cancelled the
action of having clicked 'Cancel'. That's so confusing, it's even hard to
explain. Yes, it uses "typical" language for user interaction and kind of
makes sense, but it's not easy to understand for the non-technical user.
With the new labels the user is asked to whether they want to 'Apply' the
changes or 'Discard' them. And when they choose 'Discard' the verification
question is still 'Discard' or 'Cancel'. That seems much more consistent.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Extend the tooltips to be shown both on the labels and the values and add
tooltips for all min/avg/max elements.
To avoid confusion when only one dive is selected, no longer show min SAC
or max SAC or min duration or max duration.
Fixes#694
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Maybe it would be better to just copy the whole structure and then clear
the things we don't want to copy? This seems fragile.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We copied the string pointers instead of copying the strings. Once those
got freed, things went downhill.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
--047d7b8737f87ede8e050803e6b2
Content-Type: text/plain; charset=UTF-8
<div dir="ltr"><br></div>
From 3db4a422485374801ca2f6233ec23b8671a8656d Mon Sep 17 00:00:00 2001
From: Tomaz Canabrava <tomaz.canabrava@intel.com>
Date: Sun, 16 Nov 2014 23:22:58 -0200
Subject: [PATCH] fix 727 - position correctly the popup.
When the user entered a tag and that made the message box display
the popup with the possible choices was still in the old position
hidding the line edit.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The .location and .notes fields can end up being NULL,
in which case copy_string() is safer.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
c++ have some idea about in what order things should be initialized.
This makes us comply with that order.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way any extra data probided by the dive computer is visible to the
user (without other processing). This data cannot be edited by the user as
it reflects the information given by the dive computer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While in a multi dive edit we want to apply our usual semantics (only edit
things that are the same as in the current dive), when doing an explicit
copy and paste that doesn't seem to make sense. So we manually override
that behavior.
Fixes#753
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previously we only applied the type of tank (description, volume, working
pressure) to all selected dives where the tank description matched.
With this patch we also copy the gas mix into all matching cylinders.
Additionally this addresses the issue that we should have a separate copy
of the cylinder description string for each dive.
Fixes#754
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When changing tanks we triggered a replot - but that overwrote the
displayed_dive with the current_dive before the remaining data from the
displayed_dive was used to edit the current_dive.
So now we delay this until later in the function, this way copy of paste
of both tanks and weights works.
Fixes#753
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Hunting down a different issue I managed to cause a crash here when trying
to copy a string that ended up being NULL.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We forgot to clear out the pre-existing tags. We did this for the actual
selected dives that were being edited, but not for the displayed_dive, so
deleted tags showed up again on screen (even though they were correctly
deleted from the selected dives in the dive list).
Fixes#732
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The pre-existing tissue load going into a dive can change if the start
time of a dive changes. Therefore we need to recalculate the ceiling when
editing start time (or date) of a dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While the existing code worked fine for editing that start date or time of
dives downloaded from a dive computer or imported from some other source,
for manually entered dives this did not work and the date or time was
always reset to the original time once the changes were saved.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a maxcnsText widget under infoTab and populates it.
Note that I manually edited maintab.ui to display CNS and OTU
next to each other and right after gas data.
Signed-off-by: Gaetan Bisson <bisson@archlinux.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we can't edit the trip date, we need to remember to
re-enable it after we disable it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was an interesting bug. When adding a dive that would end up in the
middle of the dive list, the newest dive in the dive list would end up
marked in the dive structure as selected - even though it wasn't
visualized as selected by Qt. Bad things happen if the user then made
changes to that dive without selecting something else first, for example
by either editing the dive or doing things to it like removing it from or
adding it to a trip. The same operation would also be applied to the
newest dive in the dive list.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use the same logic as we do for newly added dives.
As a side effect this patch appears to fix the issues with getting the
newly planned dive selected.
Fixes#692
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should correctly set all the values and puts us in edit mode.
Testing so far looks good for both single dive and multiple dives selected
(i.e., you can paste into multiple dives).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the GPS coordinates for a dive were incorrect for some reason and the
user wanted to clear them in order to then re-download / apply GPS
information from the Subsurface webservice, prior to this patch we would
always match the location name and re-populate the GPS coordinates, making
it impossible to clear a GPS location without also changing the location
name.
This patch fixes this - but if you have multiple dives with the incorrect
name / GPS location pair, the next edit to a dive that had the GPS
coordinates cleared will re-populate the GPS coordinates (at that point
Subsurface can no longer tell that this was intentional).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far we only did it when we added a dive or modified a manually added
dive. But the reality is that an edit of any dive could cause changes that
require the dive list to be reloaded.
Fixes#698
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Select the picture, press delete, profit.
[Dirk Hohndel: removed the stray hunk that snuck into this patch]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The gas use logic in the dive statistics page is confused.
The SAC case had a special case for "unknown", but only for
the first gas. Other gases had the normal empty case.
Also, the logic was really odd - if you had gases that weren't used (or
pressures not known) intermixed with gases you *did* have pressure for,
the statistics got really confused.
The list of gases showed all gases that we know about during the dive,
but then the gas use and SAC-rate lists wouldn't necessarily match,
because the loops that computed those stopped after the first gas that
didn't have any pressure change.
To make things worse, the first cylinder was special-cased again, so it
all lined up for the single-cylinder case.
This makes all the cylinders act the same way, leaving unknown gas use
(and thus SAC) just empty for that gas.
It also fixes the SAC calculation case where we don't have real samples,
and the profile is a fake profile - possibly with gas changes in between
the fake points. We now make the SAC calculations match what we show -
which is admittedly not at all necessarily what the dive was, but at
least we're consistent.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we have no data about the gas consumption it makes no sense to show a
SAC of 0. Instead we should show either "unknown" or nothing.
Fixes#693
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The only time we want the close button is when showing an error at the
bottom of the main window.
In the other cases (maintab, globe) we need to explicitly hide it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some of the toolbox icons will trigger a recalculation of the dive,
triggering then a replot, that will copy the dive to the displayed_dive
again, but in the case of a edit this would discard the edition (
that would still be shown on the UI ) leaving the dive in an
unconsistent state.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fixes the problem I pointed out im my comment to #667 and hopefully also
the original problem although I cannot confirm since i cannot reproduce the
problem in the first place.
See #677
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is yet another unintended side effect of the UI restructure changes.
I stared at this code for so long - I can't believe I kept missing this.
Fixes#668
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Reusing the displayed_dive for this caused all kind of odd problems that
were hard to reproduce, because the behavior depended on what was in the
corresponding fields of the current_dive. Worse: the GPS location handling
prevented us from reliably removing the location of a trip.
The solution isn't ideal and certainly isn't elegant. Maybe we simply
shouldn't reuse the widget here. But I think what I have now works - I
tried hard to make it break again and couldn't.
Fixes#659
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I know I tested this - no idea how I missed this.
Anyway, this was of course utterly bogus. Whenever we get a time from a
time_t into a Qt Date or Time datastructure, we need to adjust it by the
timezone offset as otherwise Qt will assume it's in local time and
helpfully change it to the wrong values for us.
See #655
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
